- 21 Mar, 2012 7 commits
-
-
Alex Deucher authored
Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Tom Stellard authored
The maximum number of pipes is needed by the user space compute driver to calculate the number of wavefronts per thread group. Signed-off-by:
Tom Stellard <thomas.stellard@amd.com> Signed-off-by:
-
- 20 Mar, 2012 33 commits
-
-
Carsten Emde authored
Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by:
Carsten Emde <C.Emde@osadl.org> Signed-off-by:
-
Seung-Woo Kim authored
This patch adds hdmi audio feature for exynos drm. With this patch, i2s channel feeds audio data in hdmi when hdmi is connected. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Eunchul Kim authored
DRM checks whether the plane supports a pixel format of fb when plane is updated. This adds a default pixel format supporting format exynos drm plane. Signed-off-by:
Eunchul Kim <chulspro.kim@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
The some contents of the exynos_hdmi.h are used only in exynos_hdmi.c, so move them to exynos_hdmi.c. Signed-off-by:
-
Joonyoung Shim authored
The is_local member indicates unused subdrv such connector and encoder so doesn't make resources for them. Signed-off-by:
-
Joonyoung Shim authored
Some subdrv need open and close functions call when open and close drm. Signed-off-by:
-
Joonyoung Shim authored
The exynos drm driver has several subdrv. They each can be module but it causes unfixed probe order of exynodr drm driver and each subdrv. It also needs some weird codes such as exynos_drm_fbdev_reinit and exynos_drm_mode_group_reinit. This patch can remove weird codes and clear codes through we doesn't modularity each subdrv. Also this removes unnecessary codes related module. Signed-off-by:
-
Joonyoung Shim authored
We should release pending pageflip events when closed. If not, they will be dangling events. Signed-off-by:
-
Inki Dae authored
this function would be used for drm based 2d acceleration driver to get/put dma address through gem handle. when exynos_drm_get_dma_address is called reference count of gem object would be increased not to be released by gem close and when exynos_drm_put_dma_address is called the reference count of this gem object would be decreased to be released. Signed-off-by:
-
Inki Dae authored
with this patch, we can allocate physically continuous or non-continuous memory and also it creates scatterlist for iommu support so allocated memory region can be mapped to iommu page table using scatterlist. Signed-off-by:
-
Inki Dae authored
this patch adds mode_fixup feature for hdmi module that specific driver changes current mode to driver desired mode properly. Signed-off-by:
-
Joonyoung Shim authored
Later Exynos series from Exynos4X12 support HDMI version 1.4. We will distinguish to use which version via platform data. This patch supports only default features of HDMI version 1.4(The 3D, sound and etc don't support yet) Signed-off-by:
-
Joonyoung Shim authored
The contents of exynos_mixer.h are used only in exynos_mixer.c, so separated header is unnecessary. Signed-off-by:
-
Yoichi Yuasa authored
It cannot map correctly if page fault begins from a intermediate address. [The driver prefaults the mapping, so we need to work from the correct base address not the faulting address otherwise the map appears offset by the fault offset] Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next * tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Only clear the GPU domains upon a successful finish drm/i915: reenable gmbus on gen3+ again drm/i915: i2c: unconditionally set up gpio fallback drm/i915: merge gmbus and gpio i2c adpater into one drm/i915: merge struct intel_gpio into struct intel_gmbus i2c: export bit-banging algo functions drm/nouveau: do a better job at hiding the NIH i2c bit-banging algo drm/i915: add dev_priv to intel_gmbus drm/i915: Fix single msg gmbus_xfers writes drm/i915: error_buffer->ring should be signed drm/i915: Silence the error message from i915_wait_request() drm/i915: use the new hdmi_force_audio enum more drm/i915: No need to search again after retiring requests drm/i915: Only bump refcnt on objects scheduled for eviction drm/i915/bios: Downgrade the "signature missing" DRM_ERROR to debug drm/i915: Ignore LVDS on hp t5745 and hp st5747 thin client drm/i915: Fixes distorted external screen image on HP 2730p
-
Michel Dänzer authored
Only radeon_gem_object_unpin was used anymore, in only one place. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Michel Dänzer authored
The hardware only takes 27 bits for the offset, so larger offsets are truncated, and the display shows random bits other than the intended ones. Signed-off-by:
-
Michel Dänzer authored
The hardware only takes 27 bits for the offset, so larger offsets are truncated, and the hardware cursor shows random bits other than the intended ones. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46796 Cc: stable@vger.kernel.org Signed-off-by:
-
Tvrtko Ursulin authored
On a system with one HDMI and one VGA connector the latter causes output polling to run every ten seconds. This causes full EDID re-fetch on every poll and approx. 100ms rendering stalls are experienced by full screen page-flipping applications. Optimisation is to trust HPD sense on R600+ ASICs and to skip doing these expensive probes unless HPD sense has changed. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=47007 agd5f: fix patch and message formatting. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
-
Alex Deucher authored
vbios lists DVI-I port as VGA and DVI-D. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=47007Signed-off-by:
-
Alex Deucher authored
We digital encoders have a detect function as well (for DP to VGA bridges), so we make sure we choose the analog one here. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=47007Signed-off-by:
-
Joe Perches authored
Use the more current logging style. Add pr_fmt and remove the TTM_PFX uses. Coalesce formats and align arguments. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Julia Lawall authored
Most of the error handling code in this function frees the buffers kcmd_addr, kvb_addr, and kbox_addr allocated at the beginning of this function. These two branches are changed to do the same. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The function radeon_cs_parser_init is only called from two places, in drivers/gpu/drm/radeon/radeon_cs.c and drivers/gpu/drm/radeon/r600_cs.c. In each case, if the call fails another function is called that frees all of the kdata and dpage information in the chunks array. So this information should not be freed in radeon_cs_parser_init as well. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Dave Airlie authored
DisplayPort spec v1.1a, Table 2-52. Same commit to Intel by ajax in 9962c925Reviewed-by:
-
Marek Olšák authored
Signed-off-by:
Marek Olšák <maraeo@gmail.com> Reviewed-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
and document the other unused ones. Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
There are also two fixes: - In DRAW_INDEX_2, we read idx_value, but should have read idx+1. - When correcting SQ_VTX_CONSTANT_WORD1_0.SIZE, we should subtract the offset. Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
