- 16 Oct, 2013 18 commits
-
-
Ian Abbott authored
Sample values in comedi are generally represented as unsigned values. `subdev_8255_interrupt()` calls `comedi_buf_put()` with a `short` data value merely because that's what was previously expected. Since it now expects an `unsigned short`, change it here for consistency. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Sample values in comedi are generally represented as unsigned values. `cfc_write_to_buffer()` in "comedi_fc.h" currently uses `short` to hold a 16-bit sample value to be written to the buffer. Change the type of the parameter to `unsigned short` for consistency. Signed-off-by:
-
Ian Abbott authored
Sample values in comedi are generally represented as unsigned values. `comedi_buf_put()` and `comedi_buf_get()` use a `short` to hold the 16-bit data value being transferred to or from the comedi buffer. Change them to use `unsigned short` for consistency. Signed-off-by:
-
Malcolm Priestley authored
Replace with struct vnt_tx_fifo_head and attach pbyBuf to adwTxKey[0] Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
White space clean up. Signed-off-by:
-
Malcolm Priestley authored
Allow switch fall-through of duplicate case. Signed-off-by:
-
Malcolm Priestley authored
Set the two TX fall back rates in s_bPacketToWirelessUsb and pass to private area of driver in variables tx_rate_fb0 and tx_rate_fb1 from the wFB_Opt0/wFB_Opt1 array. Apply these rates were needed in the TX structure and remove byFBOption settings in s_uGetRTSCTSDuration. This greatly simplifies s_uGetRTSCTSDuration and more future flexibility of setting rates from upper levels of driver. Signed-off-by:
-
Archana kumari authored
Fixes use of deprecated header <asm/io.h> in staging:dgnc:dgnc_cls.c Signed-off-by:
Archana kumari <archanakumari959@gmail.com> Signed-off-by:
-
Teodora Baluta authored
This patch fixes the checkpatch.pl script error: ERROR: do not use C99 // comments +static long ieee80211_translate_todbm(u8 signal_strength_index)// 0-100 index. Signed-off-by:
Teodora Baluta <teobaluta@gmail.com> Signed-off-by:
-
Teodora Baluta authored
Fix sparse warnings in static function in driver rtl8192u Signed-off-by:
-
Kelley Nielsen authored
As per coding style,C99 comments are not allowed also, the formal header contained empty space and redundant information that's right there in the function Signed-off-by:
Kelley Nielsen <kelleynnn@gmail.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Kelley Nielsen authored
As per coding style, C99 comments are not allowed removed some redundant information and empty space Left the parameter descriptions because the parameter list is long and cryptic looking Signed-off-by:
-
Kelley Nielsen authored
As per coding style, C99 comments are not allowed removed some redundant information and empty space Left the parameter descriptions because the parameter list is long and cryptic looking Signed-off-by:
-
Kelley Nielsen authored
As per coding style,C99 comments are not allowed also, the formal header contained empty space and redundant information that's right there in the function Signed-off-by:
-
Kelley Nielsen authored
As per coding style,C99 comments are not allowed also, the formal header contained empty space and redundant information that's right there in the function Signed-off-by:
-
Rashika Kheria authored
This patch fixes the following Sparse Warnings in btmtk_usb.c: drivers/staging/btmtk_usb/btmtk_usb.c:676:39: warning: incorrect type in assignment (different base types) drivers/staging/btmtk_usb/btmtk_usb.c:676:39: expected unsigned int [unsigned] [usertype] packet_header drivers/staging/btmtk_usb/btmtk_usb.c:676:39: got restricted __le32 [usertype] <noident> drivers/staging/btmtk_usb/btmtk_usb.c:736:31: warning: incorrect type in assignment (different base types) drivers/staging/btmtk_usb/btmtk_usb.c:736:31: expected unsigned int [unsigned] [addressable] [usertype] packet_header drivers/staging/btmtk_usb/btmtk_usb.c:736:31: got restricted __le32 [usertype] <noident> Signed-off-by:
Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by:
-
Nandini Hanumanthagowda authored
Removed whitespace related errors and warnings by removing unnecessary spaces before new line in the quoted string and spaces at start of any line or before tab to comply with the coding style. Signed-off-by:
Nandini Hanumanthagowda <nandu.hgowda@gmail.com> Signed-off-by:
-
Nandini Hanumanthagowda authored
Removed spaces around operators where it was not required as per coding style Added spaces around operators where it was necessary as per coding style Signed-off-by:
-
- 15 Oct, 2013 16 commits
-
-
Archana kumari authored
Fixes commenting style in xlr_net.c mentioned in drivers:staging:netlogic:TODO file Signed-off-by:
-
Randy Dunlap authored
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y by preventing that kconfig combination. These build errors are caused by having a kconfig bool symbol (FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535), but when the tristate symbol is =m, the bool symbol is =y. drivers/built-in.o: In function `dcon_read_status_xo_1': olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set' drivers/built-in.o: In function `dcon_wiggle_xo_1': olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set' olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear' drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow drivers/built-in.o: In function `dcon_wiggle_xo_1': olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set' drivers/built-in.o: In function `dcon_init_xo_1': olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear' olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset' olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event' olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq' olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set' However, adding GPIO_CS5535 to the Kconfig dependencies also creates a kconfig recursive dependency error on powerpc: drivers/i2c/Kconfig:5:error: recursive dependency detected! drivers/i2c/Kconfig:5: symbol I2C is selected by FB_OLPC_DCON drivers/staging/olpc_dcon/Kconfig:1: symbol FB_OLPC_DCON depends on GPIO_CS5535 drivers/gpio/Kconfig:577: symbol GPIO_CS5535 depends on GPIOLIB drivers/gpio/Kconfig:38: symbol GPIOLIB is selected by ARCH_REQUIRE_GPIOLIB drivers/gpio/Kconfig:23: symbol ARCH_REQUIRE_GPIOLIB is selected by MCU_MPC8349EMITX arch/powerpc/platforms/Kconfig:351: symbol MCU_MPC8349EMITX depends on I2C This is due to FB_OLPC_DCON selecting I2C instead of depending on it, so change the select to a dependency. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Drake <dsd@laptop.org> Cc: Jens Frederich <jfrederich@gmail.com> Cc: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 6170155d. It isn't correct. Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Drake <dsd@laptop.org> Cc: Jens Frederich <jfrederich@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix build error when CONFIG_MTD_SPINAND_ONDIEECC is not enabled by moving an inline function outside of that #ifdef block. drivers/staging/mt29f_spinand/mt29f_spinand.c: In function 'spinand_read_byte': drivers/staging/mt29f_spinand/mt29f_spinand.c:665:9: error: implicit declaration of function 'mtd_to_state' [-Werror=implicit-function-declaration] drivers/staging/mt29f_spinand/mt29f_spinand.c:665:32: warning: initialization makes pointer from integer without a cast [enabled by default] drivers/staging/mt29f_spinand/mt29f_spinand.c: In function 'spinand_write_buf': drivers/staging/mt29f_spinand/mt29f_spinand.c:700:32: warning: initialization makes pointer from integer without a cast [enabled by default] drivers/staging/mt29f_spinand/mt29f_spinand.c: In function 'spinand_read_buf': drivers/staging/mt29f_spinand/mt29f_spinand.c:707:32: warning: initialization makes pointer from integer without a cast [enabled by default] Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Kamlakant Patel <kamlakant.patel@broadcom.com> Cc: Mona Anonuevo <manonuevo@micron.com> Cc: linux-mtd@lists.infradead.org Signed-off-by:
-
Malcolm Priestley authored
Fixes occasional urb submitted while active. Even thought the fMP_CONTROL_WRITES/fMP_CONTROL_READS flags are cleared in the return context urb->hcpriv is not NULL. check for hcpriv and return STATUS_FAILURE if not NULL. Signed-off-by:
-
Malcolm Priestley authored
Remove sTimerTxData 10 second timer which triggers PSbSendNullPacket every 40 seconds when bLinkPass == true. Move the 40 second timer to the existing BSSvSecondCallBack one second delayed workqueue and trigger every 40 seconds when bLinkPass == true. Signed-off-by:
-
Malcolm Priestley authored
Return from work queues on flag fMP_DISCONNECTED to prevent any scheduling threads past closing of device. Signed-off-by:
-
Malcolm Priestley authored
Correct goto of patch staging: vt6656: make pControlURB available life time of driver. Which should free_netdev. Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 7db78438. It broke the build, and isn't ok. Cc: Archana kumari <archanakumari959@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Ashvini Varatharaj authored
Fix checkpatch error: ERROR: spaces required around that '=' (ctx:WxV) Signed-off-by:
Ashvini Varatharaj <ashvinivaratharaj@gmail.com> Signed-off-by:
-
Kelley Nielsen authored
since there was no information in the C99 style header for function get_request_type() that was not easily obtainable by looking at the function, the header was completely removed. Signed-off-by:
-
Kelley Nielsen authored
since there was no information in the C99 style header for function get_request_type() that was not easily obtainable by looking at the function, the header was completely removed. Signed-off-by:
-
Kelley Nielsen authored
As per coding style,C99 comments are not allowed also, the formal header contained empty space and redundant information that's right there in the function Signed-off-by:
-
Kelley Nielsen authored
Coding style requires that comments use the standard /* */ style instead of C99 style. Also removed author comment from a previous contributor Signed-off-by:
-
Ashvini Varatharaj authored
Fix checkpatch error: ERROR: "(foo*)" should be "(foo *)" Signed-off-by:
-
Rashika Kheria authored
This patch fixes the following Sparse Warnings in btmtk_usb.c: drivers/staging/btmtk_usb/btmtk_usb.c:110:16: warning: cast to restricted __le32 drivers/staging/btmtk_usb/btmtk_usb.c:299:23: warning: cast to restricted __le16 Signed-off-by:
-
- 14 Oct, 2013 6 commits
-
-
Jovi Zhangwei authored
Fengguang Wu reported that ktap compile failed in mips, the reason is it cannot found <asm/syscall.h> in mips arch. Due to the code serviced by <asm/syscall.h> already removed, so just simply remove the according header file to avoid compiler failure. Reported-by:
Jovi Zhangwei <jovi.zhangwei@gmail.com> Signed-off-by:
-
Jovi Zhangwei authored
Use "Jovi Zhangwei" from now on. Signed-off-by:
-
Joe Perches authored
Convert sizeof foo to sizeof(foo) to be more kernel style compatible. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Larry Finger authored
As originally submitted, this driver acquired its firmware from data statements embedded in the source code. This information has been extracted into a binary file that has been accepted into the linux-firmware git repo as commit ffc47f1 entitled "rtlwifi: Add new firmware files for rtl8188eu". This patch switches the driver to use this file, and deletes the firmware data from the source. The TODO list is also updated. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Nandini Hanumanthagowda authored
Removed unnecessary space at start of line to fix checkpatch.pl warning. Signed-off-by:
-
Nandini Hanumanthagowda authored
Fixed the line over 80 characters warning to comply with linux cidung style Signed-off-by:
-
