- 03 Jun, 2015 7 commits
-
-
Yanir Lubetkin authored
Two issues involving systim were reported. 1. Clock is not running in the correct frequency 2. In some situations, systim values were not incremented linearly This patch fixes the hardware clock configuration and the spurious non-linear increment. Signed-off-by:
Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
This fix handles a hardware issue that prevented i219 from working in legacy interrupts mode (IntMode=0) Signed-off-by:
-
Yanir Lubetkin authored
The indication that a descriptor ring flush is required was read from FEXTNVM7 by mistake. It should be read from the PCI config space. Signed-off-by:
-
Yanir Lubetkin authored
The condition under which the flush should occur was reversed. The fix should be applied before any HW reset (unless followed by bus reset) and before any power state transition from D0. If E1000_FEXTNVM7_NEED_DESCRING_FLUSH bit is set in FEXTNVM7 and TDLEN > 0 the Tx ring should be flushed. (fixes ~95% of the hang states). If the E1000_FEXTNVM7_NEED_DESCRING_FLUSH did not clear, we should also flush the RX ring. Bug was caught by Alexander Duyck during a code review when examining this fix. Signed-off-by:
-
Yanir Lubetkin authored
Fixes a warning that was reported by Yanjiang Jin <yanjiang.jin@windriver.com> by implementing the solution suggested by Alexander Duyck <alexander.h.duyck@redhat.com>. Signed-off-by:
-
Yanir Lubetkin authored
After testing various cases, the conclusion is that the fix MUST be executed BEFORE any event that the HW is reset or transition to D3. To fix that I moved the execution to the relevant places but per Alexander Duyck's review, ensure now that the DMA is valid and was not freed before manipulating the ring. Signed-off-by:
-
Yanir Lubetkin authored
Unit hang may occur if multiple descriptors are available in the rings during reset or runtime suspend. This state can be detected by testing bit 8 in the FEXTNVM7 register. If this bit is set and there are pending descriptors in one of the rings, we must flush them prior to reset. Same applies entering runtime suspend. Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
- 02 Jun, 2015 33 commits
-
-
David S. Miller authored
Shradha Shah says: ==================== sfc: ndo_get_phys_port_id, vadaptor stats and PF unload when Vf's assigned to guest This is the third and last instalment of SRIOV for EF10 patches. This patch set includes implementation of ndo_get_phys_port_id and changes to the MAC statistics code in order to support vadaptor statistics. It also includes code to deal with PF unload when Vf's are still assigned to the guest. The first couple of patches create sysfs files for physical port and link control flags which are particularly useful when we have enabled a large number of VF's. These patches have been tested with and without CONFIG_SFC_SRIOV. The creation and content of the sysfs files has been tested. The statistics are tested using ethtool for monitoring. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Daniel Pieczko authored
If any VF is assigned as the PF is unloaded, do not attempt to remove its vport or the vswitch. These will be removed if the driver binds to the PF again, as an entity reset occurs during probe. A 'force' flag is added to efx_ef10_pci_sriov_disable() to distinguish between disabling SR-IOV and driver unload. SR-IOV cannot be disabled if VFs are assigned to guests. If the PF driver is unloaded while VFs are assigned, the driver may try to bind to the VF again at a later point if the driver has been reloaded and the VF returns to the same domain as the PF. In this case, the PF will not have a VF data structure, so the VF can check this and drop out of probe early. In this case, efx->vf_count will be zero but VFs will be present. The user is advised to remove the VF and re-create it. The check at the beginning of efx_ef10_pci_sriov_disable() that efx->vf_count is non-zero is removed to allow SR-IOV to be disabled in this case. Also, if the PF driver is unloaded, it will disable SR-IOV to remove these unknown VFs. By not disabling bus-mastering if VFs are still assigned, the VF will continue to pass traffic after the PF has been removed. When using the max_vfs module parameter, if VFs are already present do not try to initialise any more. Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
-
Daniel Pieczko authored
When the driver unloads, force the unbind and removal of any VFs in the host with the PF. The PF cannot remove vports and vswitches if they are still being used by a VF driver, and when unloading the sfc driver the removal order is not guaranteed, so the instruction from the PF to the VF to unbind enforces a suitable ordering so that vswitches and vports can be removed. As a result of this, manually unbinding the driver from a single PF will result in all of its VFs in the host also being removed. Signed-off-by:
-
Daniel Pieczko authored
Signed-off-by:
-
Daniel Pieczko authored
The ifenslave command to set up a bond runs in an atomic context, and it queries the stats on the devices that are being enslaved. A VF needs to make an MCDI call to update its stats, which is not allowed in atomic context. The releasing of the stats_lock is moved to the beginning of the VF stats update function so that in_interrupt() can be used; it must be taken again before returning from this function. Signed-off-by:
-
Daniel Pieczko authored
The raw_mask array is not initialised, so it needs to be explicitly set to zero in the 'else' branch. If the EVB capability is not present, a port cannot have multiple functions so the per-port MAC stats are correct and should match the corresponding vadaptor stats, so this redundancy can be removed from the ethtool stats output. Signed-off-by:
-
Daniel Pieczko authored
MC_CMD_MAC_STATS can be called on a function before a vadaptor has been created, as the kernel can call into this through ndo_get_stats/ndo_get_stats64. If MC_CMD_MAC_STATS is called before the DMA queues have been setup, so that a vadaptor has not been created yet, firmware will return ENOENT. This is expected, so suppress the MCDI error message in this case. Signed-off-by:
-
Daniel Pieczko authored
The netdevice statistics (in /proc/net/dev) are per-function stats so they must use the vadaptor stats. Change the use of MAC stats to vadaptor stats, and remove any statistics that can only be measured per-port. All stats that are removed will be shown as zeroes when these statistics are displayed. Signed-off-by:
-
Daniel Pieczko authored
Firmware does not support a periodic DMA of vadaptor-stats on VFs, so only update the stats buffer when stats are requested (when running "ethtool -S" or an ip/ifconfig command that reports stats). Signed-off-by:
-
Daniel Pieczko authored
All interfaces will display vadaptor statistics, so set all the relevant bits in the stats bitmask. Only functions with the LINKCTRL flag will see other stats, including (per-port) MAC stats. The vadaptor stats are from rx_unicast to tx_overflow. Signed-off-by:
-
Daniel Pieczko authored
The port-id must be known so that the RMON level can be set for the collection of vadapter stats. Signed-off-by:
-
Daniel Pieczko authored
The MAC stats are per-port and will only be displayed on the PF with control of the link (one per physical port). Vadapter stats will also be displayed for this PF, so distinguish the MAC stats by adding a prefix of "port_". Signed-off-by:
-
Shradha Shah authored
Signed-off-by:
-
Shradha Shah authored
On every adapter there will be one primary PF per adaptor and one link control PF per port. Signed-off-by:
-
Shradha Shah authored
This change is a stylistic change and does not affect functionality. Signed-off-by:
-
Shradha Shah authored
In the case where we have multiple functions (PFs and VFs), this sysfs entry is useful to identify the physical port corresponding to the function we are interested in. Signed-off-by:
-
David S. Miller authored
Aleksey Makarov says: ==================== net: thunderx: fix problems reported by static check tools These are fixes for the problems that were reported by static check tools. ==================== Signed-off-by: -
Aleksey Makarov authored
GFP_KERNEL should be used in the thread context Signed-off-by:
Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by:
-
Aleksey Makarov authored
This fixes a coccinelle warning: coccinelle warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/thunder/nicvf_queues.c:360:1-11: alloc >> with no test, possible model on line 367 vim +360 drivers/net/ethernet/cavium/thunder/nicvf_queues.c 354 err = nicvf_alloc_q_desc_mem(nic, &sq->dmem, q_len, SND_QUEUE_DESC_SIZE, 355 NICVF_SQ_BASE_ALIGN_BYTES); 356 if (err) 357 return err; 358 359 sq->desc = sq->dmem.base; > 360 sq->skbuff = kcalloc(q_len, sizeof(u64), GFP_ATOMIC); 361 sq->head = 0; 362 sq->tail = 0; 363 atomic_set(&sq->free_cnt, q_len - 1); 364 sq->thresh = SND_QUEUE_THRESH; 365 366 /* Preallocate memory for TSO segment's header */ > 367 sq->tso_hdrs = dma_alloc_coherent(&nic->pdev->dev, 368 q_len * TSO_HEADER_SIZE, 369 &sq->tso_hdrs_phys, GFP_KERNEL); 370 if (!sq->tso_hdrs) Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Aleksey Makarov authored
No need to cast void* to u8*: pointer arithmetics works same way for both. Signed-off-by:
-
Aleksey Makarov authored
This fixes a copypaste bug that was discovered by a static analysis tool: The patch 4863dea3: "net: Adding support for Cavium ThunderX network controller" from May 26, 2015, leads to the following static checker warning: drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c:517 nicvf_set_rxfh() warn: we tested 'hkey' before and it was 'false' drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c 506 /* We do not allow change in unsupported parameters */ 507 if (hkey || ^^^^ We return here. 508 (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)) 509 return -EOPNOTSUPP; 510 511 rss->enable = true; 512 if (indir) { 513 for (idx = 0; idx < rss->rss_size; idx++) 514 rss->ind_tbl[idx] = indir[idx]; 515 } 516 517 if (hkey) { ^^^^ So this is dead code. 518 memcpy(rss->key, hkey, RSS_HASH_KEY_SIZE * sizeof(u64)); 519 nicvf_set_rss_key(nic); 520 } 521 522 nicvf_config_rss(nic); 523 return 0; 524 } regards, dan carpenter Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Aleksey Makarov authored
This fixes sparse messages like this: drivers/net/ethernet/cavium/thunder/nicvf_main.c:1141:26: sparse: symbol 'nicvf_get_stats64' was not declared. Should it be static? Also remove unused declarations Reported-by:
-
Aleksey Makarov authored
They were left from development stage Reported-by:
-
Aleksey Makarov authored
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:385:40: sparse: cast to restricted __le64 Reported-by:
-
Aleksey Makarov authored
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:153:25: sparse: cast to restricted __le64 Reported-by:
-
Aleksey Makarov authored
This fixes sparse messages like this: drivers/net/ethernet/cavium/thunder/thunder_bgx.c:897:24: sparse: constant 0x300000000000 is so big it is long Reported-by:
-
Robert Richter authored
There are duplicate NODE_ID macro definitions. Move all of them to nic.h for usage in nic and bgx driver and introduce nic_get_node_id() helper function. This patch also fixes 64bit mask which should have been ULL by reworking the node calculation. Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: -
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4/cxgb4vf: Adds support for Chelsio T6 adapter This patch series adds the following: Adds NIC driver support for T6 adapter Adds vNIC driver support for T6 adapter This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Fixed compilation issue, when CHELSIO_T4_FCOE is set ==================== Signed-off-by: -
Hariprasad Shenai authored
Adds vnic driver register related changes for T6 adapter Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Adds NIC driver related changes for T6 adapter. Register related changes, MC related changes, VF related changes, doorbell related changes, debugfs changes, etc Signed-off-by:
-
Hariprasad Shenai authored
Adds new macro is_t6 and adds the register address range for T6 adapter Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander Duyck and Steffen Klassert. 2) Revert ethtool PHY query change, it wasn't correct. The PHY address selected by the driver running the PHY to MAC connection decides what PHY address GET ethtool operations return information from. 3) Fix handling of sequence number bits for encryption IV generation in ESP driver, from Herbert Xu. 4) UDP can return -EAGAIN when we hit a bad checksum on receive, even when there are other packets in the receive queue which is wrong. Just respect the error returned from the generic socket recv datagram helper. From Eric Dumazet. 5) Fix BNA driver firmware loading on big-endian systems, from Ivan Vecera. 6) Fix regression in that we were inheriting the congestion control of the listening socket for new connections, the intended behavior always was to use the default in this case. From Neal Cardwell. 7) Fix NULL deref in brcmfmac driver, from Arend van Spriel. 8) OTP parsing fix in iwlwifi from Liad Kaufman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) vti6: Add pmtu handling to vti6_xmit. Revert "net: core: 'ethtool' issue with querying phy settings" bnx2x: Move statistics implementation into semaphores xen: netback: read hotplug script once at start of day. xen: netback: fix printf format string warning Revert "netfilter: ensure number of counters is >0 in do_replace()" net: dsa: Properly propagate errors from dsa_switch_setup_one tcp: fix child sockets to use system default congestion control if not set udp: fix behavior of wrong checksums sfc: free multiple Rx buffers when required bna: fix soft lock-up during firmware initialization failure bna: remove unreasonable iocpf timer start bna: fix firmware loading on big-endian machines bridge: fix br_multicast_query_expired() bug via-rhine: Resigning as maintainer brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails mac80211: Fix mac80211.h docbook comments iwlwifi: nvm: fix otp parsing in 8000 hw family iwlwifi: pcie: fix tracking of cmd_in_flight ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call ...
-
