- 24 Mar, 2007 3 commits
-
-
Deepak Saxena authored
Signed-off-by:
Manish Lachwani <mlachwani@mvista.com> Signed-off-by:
Deepak Saxena <dsaxena@mvista.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Franck Bui-Huu authored
This patch fixes two places where we used plain 'x - PAGE_OFFSET' to achieve virtual to physical address convertions. This type of convertion is no more allowed since commit 6f284a2c. Reported-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> [Build fixes for machines that don't use the generic dma-coherence.h] Signed-off-by:
-
Thomas Gleixner authored
Ray Lee reported, that on an UP kernel with "noapic" command line option set, the box locks hard during boot. Adding some debug printks revealed, that the last action on the box before stalling was "Send IPI" - a debug printk which was put into smp_send_timer_broadcast_ipi(). It seems that send_IPI_mask(mask, LOCAL_TIMER_VECTOR) fails when "noapic" is set on the command line on an UP kernel. Aside of that it does not make much sense to trigger an interrupt instead of calling the function directly on the CPU which gets the PIT/HPET interrupt in case of broadcasting. Reported-by:
Ray Lee <ray-lk@madrabbit.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Mar, 2007 37 commits
-
-
Roland McGrath authored
The segment register slots in struct pt_regs are padded to 32 bits. Some of these are stored with instructions like "pushl %es", which leaves the high 16 bits as they were. So the high bits of these fields in struct pt_regs contain kernel stack garbage. These bits are ignored by everything and never leak to user space, except in core dumps. The user struct pt_regs is always at the base of the thread's kernel stack and so it seems unlikely the information that leaks from here is ever worthwhile so as to be a security concern, but I'm not sure about that. It has been this way for ages; userland consumers of core dumps all mask off these high bits themselves. So it is not urgent. This change masks off the padding bits of the segment register slots in core dumps. ptrace already masks off these high bits, so this makes the values in core dumps consistent with what ptrace would report just before the process died. As I read the processor manuals, the cs and ss values will always be padded with zero bits rather than stack garbage. But unlike "pushl %es", this is not simple to test with a userland program. So I added the two instructions rather than wonder if they are really never necessary. I think that x86_64 does not have this problem (for either 32-bit or 64-bit processes). It only uses "mov" instructions from segment registers, which zero-extend. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Linus Torvalds authored
Needed for any architecture that claims ARCH_APICTIMER_STOPS_ON_C3, not just i386. I'm hoping Thomas will clean this up a bit later.. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: fix oops on "modprobe -r ohci1394" after network class_device conversion
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [netdrvr] ewrk3: correct card detection bug cxgb3 - fix white spaces in drivers/net/Kconfig myri10ge: update driver version to 1.3.0-1.226 myri10ge: fix management of >4kB allocated pages myri10ge: update wcfifo and intr_coal_delay default values myri10ge: Serverworks HT2100 provides aligned PCIe completion mv643xx_eth: add mv643xx_eth_shutdown function SAA9730: Fix large pile of warnings Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full" cxgb3 - T3B2 pcie config space cxgb3 - Fix potential MAC hang cxgb3 - Auto-load FW if mismatch detected cxgb3 - fix ethtool cmd on multiple queues port Fix return code in pci-skeleton.c skge: use per-port phy locking skge: mask irqs when device down skge: deadlock on tx timeout [PATCH] airo: Fix an error path memory leak [PATCH] bcm43xx: MANUALWLAN fixes
-
Andrew Morton authored
A little mistake in 8a2bfdcb is making all transactions synchronous, which reduces ext3 performance to comical levels. Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Guido Guenther authored
This is the rivafb equivalent of 238576e1. It fixes rivafb having a default backlight brightness of 0 (no picture at all) on a PBook 6,1. Signed-off-by:
Guido Guenther <agx@sigxcpu.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Danny Kukawka authored
Adds device ids of two Fujitsu Siemens Tablet PCs to pnp_dev_table Signed-off-by:
Danny Kukawka <dkukawka@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
David Howells authored
Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
James Morris authored
Fix the print formatting of three unsigned long fields in /proc/timer_list, which are currently being formatted as signed long. Signed-off-by:
James Morris <jmorris@namei.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
It turned out that it is almost impossible to trust ACPI, BIOS & Co. regarding the C states. This was the reason to switch the local apic timer off in C2 state already. OTOH there are sane and well behaving systems, which get punished by that decision. Allow the user to confirm that the local apic timer is trustworthy in C2 state. This keeps the default behaviour on the safe side. Signed-off-by:
-
Linus Torvalds authored
This reverts commit 25496cae, which broke bootup on at least Ingo's ThinkPad T60. Need to figure out exactly what is wrong before we can re-do the logic. Requested-by:
-
Stefan Richter authored
The networking subsystem has been converted from class_device to device but ieee1394 hasn't. This results in a 100% reproducible NULL pointer dereference if the ohci1394 driver module is unloaded while the eth1394 module is still loaded. http://lkml.org/lkml/2006/11/16/147 http://lkml.org/lkml/2007/3/14/4 This is a regression in 2.6.21-rc1. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by:
Ismail Dönmez <ismail@pardus.org.tr>
-
Jeff Garzik authored
Arwin Vosselman pointed out: > The ewrk3-driver doesn't function with 2.6.16-kernels (used 2.6.16.41 for > my tests). Cards will never be detected due to this bug. > > drivers/net/ewrks3.c: > Line 417 reads: > > if (nicsr == (CSR_TXD | CSR_RXD)) > > that should be: > > if (nicsr != (CSR_TXD | CSR_RXD)) > > Comparison with the same line in v2.4 shows why: > > 2.4: > if (nicsr == (CSR_TXD | CSR_RXD)){ > > blah, blah > ========== > 2.6: > if (nicsr == (CSR_TXD | CSR_RXD)) > return -ENXIO; > > blah, blah > ========== > > blah,blah will not, but should, be executed in 2.6 with a card being present. > > The fix mentioned above solves this bug. Signed-off-by:Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp
-
Divy Le Ray authored
Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Brice Goglin authored
Driver version is now 1.3.0-1.226. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Brice Goglin authored
Fix management of allocated physical pages when the architecture page size is not 4kB since the firmware cannot cross 4K boundary. Signed-off-by:
-
Brice Goglin authored
Update the default value of 2 module parameters: * wcfifo disabled * intr_coal_delay 75us Signed-off-by:
-
Brice Goglin authored
[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion Use the regular firmware on Serverworks HT2100 PCIe ports since this chipset provides aligned PCIe completion. Signed-off-by:
-
Dale Farnsworth authored
mv643xx_eth_shutdown is needed for kexec. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
-
Ralf Baechle authored
The SAA9730 driver doesn't quite grok what the difference between an ioport and memory mapped I/O is. It just happened to work on the one Linux system the SAA9730 happens to spend it's misserable existence on. drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int': drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int': drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int': drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int': drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int': drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'show_saa9730_regs': drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers': drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_cam_load': drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_mii_init': drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_control_init': drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_stop': drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_dma_init': drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_start': drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_tx': drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_rx': drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_write': drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast': drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast Fixed by using writel instead of outl. 42 warnings less. Signed-off-by:
-
Li Yang authored
This reverts commit 18babd38. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by:
Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Divy Le Ray authored
T3B2 does not lose its pcie config space on reset. Signed-off-by:
-
Divy Le Ray authored
Under rare conditions, the MAC might hang while generating a pause frame. This patch fine tunes the MAC settings to avoid the issue, allows for periodic MAC state check, and triggers a recovery if hung. Also fix one MAC statistics counter for the rev board T3B2. Signed-off-by:
-
Divy Le Ray authored
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by:
-
Divy Le Ray authored
Limit ethtool -g/-G to the given port's queues. Signed-off-by:
-
Anton Blanchard authored
We assign the return value of register_netdev to i, but return rc later on. Fix it. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Stephen Hemminger authored
Rather than a workqueue and a per-board mutex to control PHY, use a tasklet and spinlock. Tasklet is lower overhead and works just as well for this. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Stephen Hemminger authored
Wheen a port on the skge driver is not used, it should mask off interrupts from theat port. Signed-off-by:
-
Stephen Hemminger authored
The skge driver will deadlock if gets a transmit timeout because the netif_tx_lock() is already held. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Allow reset of file to ATTR_NORMAL when archive bit not set [CIFS] Do not negotiate new POSIX_PATH_OPERATIONS_CAP yet [CIFS] reset mode when client notices that ATTR_READONLY is no longer set
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: IA64: fix %ll build warnings ACPI: IA64: fix allnoconfig build ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M) ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2) ACPI: parse 2nd MADT by default ACPICA: revert "acpi_serialize" changes sony-laptop: MAINTAINERS fix entry, add L: and W: ACPI: resolve HP nx6125 S3 immediate wakeup regression ACPI: Add support to parse 2nd MADT
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bypass hcall stats until cpu features have run [POWERPC] Avoid hypervisor statistics calculation in real mode [POWERPC] Fix atomicity of TIF update in flush_thread()
-
Ingo Molnar authored
latest -git triggers an irqtrace/lockdep warning of a leaked irqs-off condition: BUG: at kernel/fork.c:1033 copy_process() after some debugging it turns out that commit ca1b940c accidentally left interrupts disabled - which trickled down all the way to the first time we fork a kernel thread and triggered the warning. the fix is to re-enable interrupts in the 'else' branch of setup_boot_APIC_clock()'s pmtimers calibration path. Reported-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@brown.paperbag.linutronix.de> Signed-off-by:
-
Jarek Poplawski authored
lockdep's data shouldn't be used when debug_locks == 0 because it's not updated after this, so it's more misleading than helpful. PS: probably lockdep's current-> fields should be reset after it turns debug_locks off: so, after printing a bug report, but before return from exported functions, but there are really a lot of these possibilities (e.g. after DEBUG_LOCKS_WARN_ON), so, something could be missed. (Of course direct use of this fields isn't recommended either.) Reported-by:
Folkert van Heusden <folkert@vanheusden.com> Inspired-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
Jarek Poplawski <jarkao2@o2.pl> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Rafael J. Wysocki authored
Since freezable workqueues are broken in 2.6.21-rc (cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=116855740612755, http://marc.theaimsgroup.com/?l=linux-kernel&m=117261312523921&w=2) it's better to change the only user of them, which is XFS, to use "normal" nonfreezable workqueues. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: David Chinner <dgc@sgi.com> Signed-off-by:
-
Jarek Poplawski authored
lockdep found a bug during a run of workqueue function - this could be also caused by a bug from other code running simultaneously. lockdep really shouldn't be used when debug_locks == 0! Reported-by:
-
