To return -EINPROGRESS on success in padata_do_parallel was
considered to be odd. This patch changes this to return zero
on success. Also the only user of padata, pcrypt is adapted to
convert a return of zero to -EINPROGRESS within the crypto layer.
This also removes the pcrypt fallback if padata_do_parallel
was called on a not running padata instance as we can't handle it
anymore. This fallback was unused, so it's save to remove it.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bug when the padata cpumask does not
intersect with the active cpumask. In this case we get a
division by zero in padata_alloc_pd and we end up with a
useless padata instance. Padata can end up with an empty
cpumask for two reasons:

1. A user removed the last cpu that belongs to the padata
cpumask and the active cpumask.

2. The last cpu that belongs to the padata cpumask and the
active cpumask goes offline.

We introduce a function padata_validate_cpumask to check if the padata
cpumask does intersect with the active cpumask. If the cpumasks do not
intersect we mark the instance as invalid, so it can't be used. We do not
allocate the cpumask dependend recources in this case. This fixes the
division by zero and keeps the padate instance in a consistent state.

It's not possible to trigger this bug by now because the only padata user,
pcrypt uses always the possible cpumask.
Reported-by: Dan Kruchinin <dkruchinin@acm.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch makes padata_stop to block until the padata
instance is unused. Also we split padata_stop to a locked
and a unlocked version. This is in preparation to be able
to change the cpumask after a call to patata stop.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the PADATA_INVALID flag which is
checked on padata start. This will be used to mark a padata
instance as invalid, if the padata cpumask does not intersect
with the active cpumask. we change padata_start to return an
error if the PADATA_INVALID is set. Also we adapt the only
padata user, pcrypt to this change.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The below patch gets rid of an unused variable ctx reported by
GCC when building the kernel.
  CC [M]  drivers/crypto/hifn_795x.o
drivers/crypto/hifn_795x.c: In function 'hifn_flush':
drivers/crypto/hifn_795x.c:2021:23: warning: variable 'ctx' set but not used
drivers/crypto/hifn_795x.c: In function 'hifn_process_queue':
drivers/crypto/hifn_795x.c:2142:23: warning: variable 'ctx' set but not used
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Correct ahash_process_req() to properly handle cases
where the total hash amount is a multiple of the blocksize.
The SEC must have some data to hash during the very last
descriptor operation; so up to one whole blocksize
of data is buffered until the final hash.
Signed-off-by: Lee Nipper <lee.nipper@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This fixes the broken autoloading of the corresponding twofish assembler
ciphers on x86 and x86_64 if they are available. The module name of the
generic implementation was in conflict with the alias in the assembler
modules. The generic twofish c implementation is renamed to
twofish_generic according to the other algorithms with assembler
implementations and an module alias is added for 'twofish'. You can now
load 'twofish' giving you the best implementation by priority,
'twofish-generic' to get the c implementation or 'twofish-asm' to get
the assembler version of cipher.
Signed-off-by: Joachim Fritschi <jfritschi@freenet.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus
self-tests will still run, but it is now possible to disable them
to gain some time during bootup.
Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The PCOMP Kconfig entry current allows the following combination
which is illegal:

ZLIB=y
PCOMP=y
ALGAPI=m
ALGAPI2=y
MANAGER=m
MANAGER2=m

This patch fixes this by adding PCOMP2 so that PCOMP can select
ALGAPI to propagate the setting to MANAGER2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAX_SEQ_NR is used in padata_alloc_pd() like this:

        pd->max_seq_nr = (MAX_SEQ_NR / num_cpus) * num_cpus - 1;

It needs parenthesis or the divide by num_cpus takes precedence over the
subtraction.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The error handling in mv_probe() was a bit messed up.  There were some 
gotos to the wrong labels so it ended up releasing stuff that that hadn't
been aquired and not releasing stuff that was meant to be released.  I
shuffled it around a bit to fix it and make it clearer.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

arch/s390/crypto/crypto_des.h:18: ERROR: do not use C99 // comments
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unused #include <linux/version.h>('s) in
  drivers/crypto/omap-sham.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

One note is that, unlike with non-HMAC hashes, we can't support
hmac(sha224) using the HMAC_SHA256 opcode.
Signed-off-by: David S. Miller <davem@davemloft.net>

All of the ahash ->digest() ops do essentially the same thing, just
using different parameters.

So instead, have a single n2_hash_async_digest() and use an
n2_ahash_alg container that provides the parameters.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Unused, and we'll do this via the request context.
Signed-off-by: David S. Miller <davem@davemloft.net>

Do this by putting the async fallback request at the end of an n2
specific ahash request context, then properly adjusting the request
private size in our ahash ->cra_init().

We also need to put the writable state bits into the n2 request
private instead of the n2 cra_ctx.

With help from Herbert Xu.
Signed-off-by: David S. Miller <davem@davemloft.net>

Both the CWQ and MAU caches unintentionally had that same name.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)).  The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T x;
identifier f;
@@

T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
 ...+> }

@@
expression x;
@@

- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (63 commits)
  drivers/net/usb/asix.c: Fix pointer cast.
  be2net: Bug fix to avoid disabling bottom half during firmware upgrade.
  proc_dointvec: write a single value
  hso: add support for new products
  Phonet: fix potential use-after-free in pep_sock_close()
  ath9k: remove VEOL support for ad-hoc
  ath9k: change beacon allocation to prefer the first beacon slot
  sock.h: fix kernel-doc warning
  cls_cgroup: Fix build error when built-in
  macvlan: do proper cleanup in macvlan_common_newlink() V2
  be2net: Bug fix in init code in probe
  net/dccp: expansion of error code size
  ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleep
  wireless: fix sta_info.h kernel-doc warnings
  wireless: fix mac80211.h kernel-doc warnings
  iwlwifi: testing the wrong variable in iwl_add_bssid_station()
  ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs()
  ath9k_htc: dereferencing before check in hif_usb_tx_cb()
  rt2x00: Fix rt2800usb TX descriptor writing.
  rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.
  ...

* 'alpha-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: simplify and optimize sched_find_first_bit
  alpha: invoke oom-killer from page fault
  Convert alpha to use clocksources instead of arch_gettimeoffset

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  driver core: add devname module aliases to allow module on-demand auto-loading

This reverts commit 480b02df, since
Rafael reports that it causes occasional kernel paging request faults in
load_module().

Dropping the module lock and re-taking it deep in the call-chain is
definitely not the right thing to do.  That just turns the mutex from a
lock into a "random non-locking data structure" that doesn't actually
protect what it's supposed to protect.
Requested-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Stephen Rothwell reports the following new warning:

drivers/net/usb/asix.c: In function 'asix_rx_fixup':
drivers/net/usb/asix.c:325: warning: cast from pointer to integer of different size
drivers/net/usb/asix.c:354: warning: cast from pointer to integer of different size

The code just cares about the low alignment bits, so use
an "unsigned long" cast instead of one to "u32".
Signed-off-by: David S. Miller <davem@davemloft.net>

Certain firmware commands/operations to upgrade firmware could take several
seconds to complete. The code presently disables bottom half during these
operations which could lead to unpredictable behaviour in certain cases. This
patch now does all firmware upgrade operations asynchronously using a
completion variable.
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 00b7c339
"sysctl: refactor integer handling proc code"
modified the behaviour of writing to /proc.
Before the commit, write("1\n") to /proc/sys/kernel/printk succeeded. But
now it returns EINVAL.

This commit supports writing a single value to a multi-valued entry.
Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Reviewed-and-tested-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a few new product id's for the hso driver.
Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk_common_release() might destroy our last reference to the socket.
So an extra temporary reference is needed during cleanup.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Search only the first 100 bits instead of 140, saving a couple
instructions. The resulting code is about 1/3 faster (40K ticks/1000
iterations down to 30K ticks/1000 iterations).

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>

As explained in commit 1c0fe6e3, we want to call the architecture
independent oom killer when getting an unexplained OOM from
handle_mm_fault, rather than simply killing current.

[mattst88: kill now unused 'survive' label]
Cc: linux-alpha@vger.kernel.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-arch@vger.kernel.org
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>

Alpha has a tsc like rpcc counter that it uses to manage time.
This can be converted to an actual clocksource instead of utilizing
the arch_gettimeoffset method that is really only there for legacy
systems with no continuous counter.

Further cleanups could be made if alpha converted to the clockevent
model.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Richard Henderson <rth@twiddle.net>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Tested-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>

This adds:
  alias: devname:<name>
to some common kernel modules, which will allow the on-demand loading
of the kernel module when the device node is accessed.

Ideally all these modules would be compiled-in, but distros seems too
much in love with their modularization that we need to cover the common
cases with this new facility. It will allow us to remove a bunch of pretty
useless init scripts and modprobes from init scripts.

The static device node aliases will be carried in the module itself. The
program depmod will extract this information to a file in the module directory:
  $ cat /lib/modules/2.6.34-00650-g537b60d1-dirty/modules.devname
  # Device nodes to trigger on-demand module loading.
  microcode cpu/microcode c10:184
  fuse fuse c10:229
  ppp_generic ppp c108:0
  tun net/tun c10:200
  dm_mod mapper/control c10:235

Udev will pick up the depmod created file on startup and create all the
static device nodes which the kernel modules specify, so that these modules
get automatically loaded when the device node is accessed:
  $ /sbin/udevd --debug
  ...
  static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184
  static_dev_create_from_modules: mknod '/dev/fuse' c10:229
  static_dev_create_from_modules: mknod '/dev/ppp' c108:0
  static_dev_create_from_modules: mknod '/dev/net/tun' c10:200
  static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235
  udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666
  udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666

A few device nodes are switched to statically allocated numbers, to allow
the static nodes to work. This might also useful for systems which still run
a plain static /dev, which is completely unsafe to use with any dynamic minor
numbers.

Note:
The devname aliases must be limited to the *common* and *single*instance*
device nodes, like the misc devices, and never be used for conceptually limited
systems like the loop devices, which should rather get fixed properly and get a
control node for losetup to talk to, instead of creating a random number of
device nodes in advance, regardless if they are ever used.

This facility is to hide the mess distros are creating with too modualized
kernels, and just to hide that these modules are not compiled-in, and not to
paper-over broken concepts. Thanks! :)

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits)
  ARM: 6141/1: Add audio support part in arch/arm/mach-w90x900
  ARM: 5939/1: ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline
  ARM: 6140/1: silence a bogus sparse warning in unwind.c
  ARM: mach-at91: duplicated include
  ARM: arch/arm/nwfpe/fpsr.h: Checkpatch cleanup
  ARM: arch/arm/mach-shark/pci.c: Checkpatch cleanup
  ARM: arch/arm/nwfpe/ChangeLog: Checkpatch cleanup
  ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanup
  ARM: arch/arm/mach-h720x/common.h: Checkpatch cleanup
  ARM: arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup
  ARM: arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup
  ARM: arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup
  ARM: SPEAR6xx: remove duplicated #include
  ARM: s3c6400_defconfig: Add NAND driver
  ARM: s3c6400_defconfig: enable sound as modules
  ARM: s3c6400_defconfig: enable power management
  ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34
  ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34
  ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34
  ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix incorrect unlock in nes_process_mac_intr()
  RDMA/nes: Async event for closed QP causes crash
  RDMA/nes: Have ethtool read hardware registers for rx/tx stats
  RDMA/cxgb4: Only insert sq qid in lookup table
  RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcode
  RDMA/cxgb4: Set fence flag for inv-local-stag work requests
  RDMA/cxgb4: Update some HW limits
  RDMA/cxgb4: Don't limit fastreg page list depth
  RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocation
  RDMA/cxgb4: Fix overflow bug in CQ arm
  RDMA/cxgb4: Optimize CQ overflow detection
  RDMA/cxgb4: CQ size must be IQ size - 2
  RDMA/cxgb4: Register RDMA provider based on LLD state_change events
  RDMA/cxgb4: Detach from the LLD after unregistering RDMA device
  IB/ipath: Remove support for QLogic PCIe QLE devices
  IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters
  IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size static
  IB/core: Allow device-specific per-port sysfs files
  mlx4_core: Clean up mlx4_alloc_icm() a bit
  mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()