- 18 Mar, 2020 24 commits
-
-
Shannon Nelson authored
If we don't recognize the transceiver type, set the xcvr type and data length such that ethtool can at least print the first 256 bytes and the reader can figure out why the transceiver is not recognized. While we're here, we can update the phy_id type values to use the enum values in sfp.h. Fixes: 4d03e00a ("ionic: Add initial ethtool support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Remove the adminq's napi struct when tearing down the adminq. Fixes: 1d062b7b ("ionic: Add basic adminq support") Signed-off-by:
-
Shannon Nelson authored
Don't bother de-initing RSS if it wasn't selected. Fixes: aa319881 ("ionic: Add RSS support") Signed-off-by:
-
Shannon Nelson authored
If we don't set a port type, the devlink code will eventually print a WARN in the kernel log. Because the mgmt device is not really a useful port, don't register it as a devlink port. Fixes: b3f064e9 ("ionic: add support for device id 0x1004") Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net_sched: allow use of hrtimer slack Packet schedulers have used hrtimers with exact expiry times. Some of them can afford having a slack, in order to reduce the number of timer interrupts and feed bigger batches to increase efficiency. FQ for example does not care if throttled packets are sent with an additional (small) delay. Original observation of having maybe too many interrupts was made by Willem de Bruijn. v2: added strict netlink checking (Jakub Kicinski) ==================== Signed-off-by: -
Eric Dumazet authored
Add a new attribute to control the fq qdisc hrtimer slack. Default is set to 10 usec. When/if packets are throttled, fq set up an hrtimer that can lead to one interrupt per packet in the throttled queue. By using a timer slack, we allow better use of timer interrupts, by giving them a chance to call multiple timer callbacks at each hardware interrupt. Also, giving a slack allows FQ to dequeue batches of packets instead of a single one, thus increasing xmit_more efficiency. This has no negative effect on the rate a TCP flow can sustain, since each TCP flow maintains its own precise vtime (tp->tcp_wstamp_ns) v2: added strict netlink checking (as feedback from Jakub Kicinski) Tested: 1000 concurrent flows all using paced packets. 1,000,000 packets sent per second. Before the patch : $ vmstat 2 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 60726784 23628 3485992 0 0 138 1 977 535 0 12 87 0 0 0 0 0 60714700 23628 3485628 0 0 0 0 1568827 26462 0 22 78 0 0 1 0 0 60716012 23628 3485656 0 0 0 0 1570034 26216 0 22 78 0 0 0 0 0 60722420 23628 3485492 0 0 0 0 1567230 26424 0 22 78 0 0 0 0 0 60727484 23628 3485556 0 0 0 0 1568220 26200 0 22 78 0 0 2 0 0 60718900 23628 3485380 0 0 0 40 1564721 26630 0 22 78 0 0 2 0 0 60718096 23628 3485332 0 0 0 0 1562593 26432 0 22 78 0 0 0 0 0 60719608 23628 3485064 0 0 0 0 1563806 26238 0 22 78 0 0 1 0 0 60722876 23628 3485236 0 0 0 130 1565874 26566 0 22 78 0 0 1 0 0 60722752 23628 3484908 0 0 0 0 1567646 26247 0 22 78 0 0 After the patch, slack of 10 usec, we can see a reduction of interrupts per second, and a small decrease of reported cpu usage. $ vmstat 2 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 60722564 23628 3484728 0 0 133 1 696 545 0 13 87 0 0 1 0 0 60722568 23628 3484824 0 0 0 0 977278 25469 0 20 80 0 0 0 0 0 60716396 23628 3484764 0 0 0 0 979997 25326 0 20 80 0 0 0 0 0 60713844 23628 3484960 0 0 0 0 981394 25249 0 20 80 0 0 2 0 0 60720468 23628 3484916 0 0 0 0 982860 25062 0 20 80 0 0 1 0 0 60721236 23628 3484856 0 0 0 0 982867 25100 0 20 80 0 0 1 0 0 60722400 23628 3484456 0 0 0 8 982698 25303 0 20 80 0 0 0 0 0 60715396 23628 3484428 0 0 0 0 981777 25176 0 20 80 0 0 0 0 0 60716520 23628 3486544 0 0 0 36 978965 27857 0 21 79 0 0 0 0 0 60719592 23628 3486516 0 0 0 22 977318 25106 0 20 80 0 0 Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
qdisc_watchdog_schedule_range_ns() can use the newly added slack and avoid rearming the hrtimer a bit earlier than the current value. This patch has no effect if delta_ns parameter is zero. Note that this means the max slack is potentially doubled. Signed-off-by:
-
Eric Dumazet authored
Some packet schedulers might want to add a slack when programming hrtimers. This can reduce number of interrupts and increase batch sizes and thus give good xmit_more savings. This commit adds qdisc_watchdog_schedule_range_ns() helper, with an extra delta_ns parameter. Legacy qdisc_watchdog_schedule_n() becomes an inline passing a zero slack. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: rename flow_action stats and set NFP type Jiri, I hope this is okay with you, I just dropped the "type" from the helper and value names, and now things should be able to fit on a line, within 80 characters. Second patch makes the NFP able to offload DELAYED stats, which is the type it supports. ==================== Signed-off-by: -
Jakub Kicinski authored
NFP flower offload uses delayed stats. Kernel recently gained the ability to specify stats types. Make nfp accept DELAYED stats, not just the catch all "any". Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: improve phy_driver callback handle_interrupt did_interrupt() clears the interrupt, therefore handle_interrupt() can not check which event triggered the interrupt. To overcome this constraint and allow more flexibility for customer interrupt handlers, let's decouple handle_interrupt() from parts of the phylib interrupt handling. Custom interrupt handlers now have to implement the did_interrupt() functionality in handle_interrupt() if needed. Fortunately we have just one custom interrupt handler so far (in the mscc PHY driver), convert it to the changed API and make use of the benefits. ==================== Signed-off-by: -
Heiner Kallweit authored
Trigger the respective interrupt handler functionality only if the related interrupt source bit is set. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
did_interrupt() clears the interrupt, therefore handle_interrupt() can not check which event triggered the interrupt. To overcome this constraint and allow more flexibility for customer interrupt handlers, let's decouple handle_interrupt() from parts of the phylib interrupt handling. Custom interrupt handlers now have to implement the did_interrupt() functionality in handle_interrupt() if needed. Fortunately we have just one custom interrupt handler so far (in the mscc PHY driver), convert it to the changed API. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - last part Convert remaining drivers following the groundwork laid in a recent patch set [1] and continued in [2], [3], [4], [5]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set is the sixth and last installment. It converts the remaining 8 drivers in drivers/net/ethernet. The last patch makes declaring supported IRQ coalescing parameters a requirement. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ [3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/ [4] https://lore.kernel.org/netdev/20200311223302.2171564-1-kuba@kernel.org/ [5] https://lore.kernel.org/netdev/20200313040803.2367590-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Now that all in-tree drivers have been updated we can make the supported_coalesce_params mandatory. To save debugging time in case some driver was missed (or is out of tree) add a warning when netdev is registered with set_coalesce but without supported_coalesce_params. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. While at it remove unnecessary zeroing on get. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. The check for use_adaptive_tx_coalesce will now be done by the core. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
- 17 Mar, 2020 9 commits
-
-
David S. Miller authored
Pengcheng Yang says: ==================== tcp: fix stretch ACK bugs in congestion control modules "stretch ACKs" (caused by LRO, GRO, delayed ACKs or middleboxes) can cause serious performance shortfalls in common congestion control algorithms. Neal Cardwell submitted a series of patches starting with commit e73ebb08 ("tcp: stretch ACK fixes prep") to handle stretch ACKs and fixed stretch ACK bugs in Reno and CUBIC congestion control algorithms. This patch series continues to fix bic, scalable, veno and yeah congestion control algorithms to handle stretch ACKs. Changes in v2: - Provide [PATCH 0/N] to describe the modifications of this patch series ==================== Signed-off-by:
-
Pengcheng Yang authored
Change Yeah to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, we re-implemented the scalable path using tcp_cong_avoid_ai() and removed the pkts_acked variable. Signed-off-by:
Pengcheng Yang <yangpc@wangsu.com> Signed-off-by:
-
Pengcheng Yang authored
Change Veno to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Pengcheng Yang authored
No code logic has been changed in this patch. Signed-off-by:
-
Pengcheng Yang authored
Change Scalable to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, because we are now precisely accounting for stretch ACKs, including delayed ACKs, we can now change TCP_SCALABLE_AI_CNT to 100. Signed-off-by:
-
Pengcheng Yang authored
Changes BIC to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). Signed-off-by:
-
Jesper Dangaard Brouer authored
XDP-redirect is broken in this driver sfc. XDP_REDIRECT requires tailroom for skb_shared_info when creating an SKB based on the redirected xdp_frame (both in cpumap and veth). The fix requires some initial explaining. The driver uses RX page-split when possible. It reserves the top 64 bytes in the RX-page for storing dma_addr (struct efx_rx_page_state). It also have the XDP recommended headroom of XDP_PACKET_HEADROOM (256 bytes). As it doesn't reserve any tailroom, it can still fit two standard MTU (1500) frames into one page. The sizeof struct skb_shared_info in 320 bytes. Thus drivers like ixgbe and i40e, reduce their XDP headroom to 192 bytes, which allows them to fit two frames with max 1536 bytes into a 4K page (192+1536+320=2048). The fix is to reduce this drivers headroom to 128 bytes and add the 320 bytes tailroom. This account for reserved top 64 bytes in the page, and still fit two frame in a page for normal MTUs. We must never go below 128 bytes of headroom for XDP, as one cacheline is for xdp_frame area and next cacheline is reserved for metadata area. Fixes: eb9a36be ("sfc: perform XDP processing on received packets") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
-
Alex Elder authored
Rearrange the config files for remoteproc and IPA to fix their interdependencies. First, have CONFIG_QCOM_Q6V5_MSS select QCOM_Q6V5_IPA_NOTIFY so the notification code is built regardless of whether IPA needs it. Next, represent QCOM_IPA as being dependent on QCOM_Q6V5_MSS rather than setting its value to match QCOM_Q6V5_COMMON (which is selected by QCOM_Q6V5_MSS). Drop all dependencies from QCOM_Q6V5_IPA_NOTIFY. The notification code will be built whenever QCOM_Q6V5_MSS is set, and it has no other dependencies. Signed-off-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Madhuparna Bhowmik authored
This path fixes the suspicious RCU usage warning reported by kernel test robot. net/kcm/kcmproc.c:#RCU-list_traversed_in_non-reader_section There is no need to use list_for_each_entry_rcu() in kcm_stats_seq_show() as the list is always traversed under knet->mutex held. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
-
- 16 Mar, 2020 7 commits
-
-
Zheng Zengkai authored
Remove set but not used variables 'sw_comp_cons' and 'hw_comp_cons' to fix gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:20: warning: variable sw_comp_cons set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:6: warning: variable hw_comp_cons set but not used [-Wunused-but-set-variable] After removing 'hw_comp_cons',the memory barrier 'rmb()' and its comments become useless, so remove them as well. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by:
-
Jiri Pirko authored
For a single pedit action, multiple offload entries may be used. Set the hw_stats_type to all of them. Fixes: 44f86580 ("sched: act: allow user to specify type of HW stats for a filter") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Dejin Zheng says: ==================== net: stmmac: Use readl_poll_timeout() to simplify the code This patch sets just for replace the open-coded loop to the readl_poll_timeout() helper macro for simplify the code in stmmac driver. v2 -> v3: - return whatever error code by readl_poll_timeout() returned. v1 -> v2: - no changed. I am a newbie and sent this patch a month ago (February 6th). So far, I have not received any comments or suggestion. I think it may be lost somewhere in the world, so resend it. ==================== Signed-off-by: -
Dejin Zheng authored
The dwmac4_dma_reset() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
-
Dejin Zheng authored
The init_systime() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by:
-
YueHaibing authored
drivers/crypto/chelsio/chcr_ktls.c: In function chcr_ktls_cpl_set_tcb_rpl: drivers/crypto/chelsio/chcr_ktls.c:662:11: warning: variable status set but not used [-Wunused-but-set-variable] commit 8a30923e ("cxgb4/chcr: Save tx keys and handle HW response") involved this unused variable, remove it. Reported-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Era Mayflower authored
Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by:Era Mayflower <mayflowerera@gmail.com> Signed-off-by:
-
