mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320

Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288
PMIC depending on the design one of 2 possible LDOs on the PMIC is used
for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in
low noise LDO mode).

The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM
methods to set 3.3 or 1.8 signalling voltage and this appears to work
as advertised, so presumably the device is actually using GPIO1LDO for
the external microSD signalling voltage.

But this device has a bug in the _PS0 method of the SHC1 ACPI device,
the DSM remembers the last set signalling voltage and the _PS0 restores
this after a (runtime) suspend-resume cycle, but it "restores" the voltage
on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3
is used for the LCD and setting it to 1.8V causes the LCD to go black.

This commit works around this issue by calling the Intel DSM to reset the
signal voltage to 3.3V after the host has been runtime suspended.
This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which
leaves it at its original setting fixing the LCD going black.

This commit adds and uses a DMI quirk mechanism to only trigger this
workaround on the Lenovo Miix 320 while leaving the behavior of the
driver unchanged on other devices.

BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355Reported-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316184753.393458-1-hdegoede@redhat.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull irq fix from Thomas Gleixner:
 "A single commit to handle an erratum in Cavium ThunderX to prevent
  access to GIC registers which are broken in the implementation"

* tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2

Pull futex fix from Thomas Gleixner:
 "Fix for yet another subtle futex issue.

  The futex code used ihold() to prevent inodes from vanishing, but
  ihold() does not guarantee inode persistence. Replace the inode
  pointer with a per boot, machine wide, unique inode identifier.

  The second commit fixes the breakage of the hash mechanism which
  causes a 100% performance regression"

* tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Unbreak futex hashing
  futex: Fix inode life-time issue

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for x86:

   - Map EFI runtime service data as encrypted when SEV is enabled.

     Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode.

   - Remove the warning in the vector management code which triggered
     when a managed interrupt affinity changed outside of a CPU hotplug
     operation.

     The warning was correct until the recent core code change that
     introduced a CPU isolation feature which needs to migrate managed
     interrupts away from online CPUs under certain conditions to
     achieve the isolation"

* tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vector: Remove warning on managed interrupt migration
  x86/ioremap: Map EFI runtime services data as encrypted for SEV

Pull perf fixes from Thomas Gleixner:
 "A pile of perf fixes:

  Kernel side:

   - AMD uncore driver: Replace the open coded sanity check with the
     core variant, which provides the correct error code and also leaves
     a hint in dmesg

  Tooling:

   - Fix the stdio input handling with glibc versions >= 2.28

   - Unbreak the futex-wake benchmark which was reduced to 0 test
     threads due to the conversion to cpumaps

   - Initialize sigaction structs before invoking sys_sigactio()

   - Plug the mapfile memory leak in perf jevents

   - Fix off by one relative directory includes

   - Fix an undefined string comparison in perf diff"

* tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
  tools: Fix off-by 1 relative directory includes
  perf jevents: Fix leak of mapfile memory
  perf bench: Clear struct sigaction before sigaction() syscall
  perf bench futex-wake: Restore thread count default to online CPU count
  perf top: Fix stdio interface input handling with glibc 2.28+
  perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare
  perf symbols: Don't try to find a vmlinux file when looking for kernel modules
  perf bench: Share some global variables to fix build with gcc 10
  perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files
  perf env: Do not return pointers to local variables
  perf tests bp_account: Make global variable static

Pull timer fix from Thomas Gleixner:
 "A single fix adding the missing time namespace adjustment in
  sys/sysinfo which caused sys/sysinfo to be inconsistent with
  /proc/uptime when read from a task inside a time namespace"

* tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sys/sysinfo: Respect boottime inside time namespace

Pull RAS fixes from Thomas Gleixner:
 "Two RAS related fixes:

   - Shut down the per CPU thermal throttling poll work properly when a
     CPU goes offline.

     The missing shutdown caused the poll work to be migrated to a
     unbound worker which triggered warnings about the usage of
     smp_processor_id() in preemptible context

   - Fix the PPIN feature initialization which missed to enable the
     functionality when PPIN_CTL was enabled but the MSR locked against
     updates"

* tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix logic and comments around MSR_PPIN_CTL
  x86/mce/therm_throt: Undo thermal polling properly on CPU offline

Pull EFI fixes from Thomas Gleixner:
 "Two EFI fixes:

   - Prevent a race and buffer overflow in the sysfs efivars interface
     which causes kernel memory corruption.

   - Add the missing NULL pointer checks in efivar_store_raw()"

* tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Add a sanity check to efivar_store_raw()
  efi: Fix a race and a buffer overflow while reading efivars via sysfs

Pull IOMMU fixes from Joerg Roedel:

 - Intel VT-d fixes:
    - RCU list handling fixes
    - Replace WARN_TAINT with pr_warn + add_taint for reporting firmware
      issues
    - DebugFS fixes
    - Fix for hugepage handling in iova_to_phys implementation
    - Fix for handling VMD devices, which have a domain number which
      doesn't fit into 16 bits
    - Warning message fix

 - MSI allocation fix for iommu-dma code

 - Sign-extension fix for io page-table code

 - Fix for AMD-Vi to properly update the is-running bit when AVIC is
   used

* tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Populate debugfs if IOMMUs are detected
  iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE
  iommu/vt-d: Ignore devices with out-of-spec domain number
  iommu/vt-d: Fix the wrong printing in RHSA parsing
  iommu/vt-d: Fix debugfs register reads
  iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: Silence RCU-list debugging warnings
  iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
  iommu/dma: Fix MSI reservation allocation
  iommu/io-pgtable-arm: Fix IOVA validation for 32-bit
  iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
  iommu/vt-d: Fix RCU list debugging warnings

Merge tag 'irqchip-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Add workaround for Cavium/Marvell ThunderX unimplemented GIC registers

Pull i2c fixes from Wolfram Sang:
 "I2C has quite some regression fixes this time.

  One is also related to watchdogs, we have proper acks from Guenter for
  them"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: acpi: put device when verifying client fails
  misc: eeprom: at24: fix regulator underflow
  i2c: gpio: suppress error on probe defer
  macintosh: windfarm: fix MODINFO regression
  i2c: designware-pci: Fix BUG_ON during device removal
  i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
  watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  watchdog: iTCO_wdt: Export vendorsupport

Pull ARC fixes from Vineet Gupta:

 - Fix __ALIGN_STR and __ALIGN to not use default junk padding

 - Misc Kconfig cleanups, header updates

* tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: define __ALIGN_STR and __ALIGN symbols for ARC
  ARC: show_regs: reduce lines of output
  ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  ARC: fpu: fix randconfig build error reported by 0-day test service
  ARC: fix some Kconfig typos
  ARC: Cleanup old Kconfig IO scheduler options

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes for x86 and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
  KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
  KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
  KVM: s390: Also reset registers in sync regs for initial cpu reset
  KVM: fix Kconfig menu text for -Werror
  KVM: x86: remove stale comment from struct x86_emulate_ctxt
  KVM: x86: clear stale x86_emulate_ctxt->intercept value
  KVM: SVM: Fix the svm vmexit code for WRMSR
  KVM: X86: Fix dereference null cpufreq policy

Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b8 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull clk fixes from Stephen Boyd:
 "A small collection of fixes. I'll make another sweep soon to look for
  more fixes for this -rc series.

   - Mark device node const in of_clk_get_parent APIs to ease landing
     changes in users later

   - Fix flag for Qualcomm SC7180 video clocks where we thought it would
     never turn off but actually hardware takes care of it

   - Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because
     this clk is always on anyway

   - Correct some bad dt-binding numbers for i.MX8MN SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx8mn: Fix incorrect clock defines
  clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
  clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
  of: clk: Make of_clk_get_parent_{count,name}() parameter const

When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter
with EVMCS GPA = 0 the host crashes because the

evmcs_gpa != vmx->nested.hv_evmcs_vmptr

condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to
false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will
happen on vmx->nested.hv_evmcs pointer dereference.

Another problematic EVMCS ptr value is '-1' but it only causes host crash
after nested_release_evmcs() invocation. The problem is exactly the same as
with '0', we mistakenly think that the EVMCS pointer hasn't changed and
thus nested.hv_evmcs_vmptr is valid.

Resolve the issue by adding an additional !vmx->nested.hv_evmcs
check to nested_vmx_handle_enlightened_vmptrld(), this way we will
always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL
and this is supposed to catch all invalid EVMCS GPAs.

Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs()
to be consistent with initialization where we don't currently
set hv_evmcs_vmptr to '-1'.

Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fully do the CPU resets as intended

With 7de3f142 ("KVM: s390: Add new reset vcpu API") we clarified
the meaning of the reset ioctl to fully reset the CPU and not only the
parts that can not be handled by userspace. Turns out that we missed
some parts.

Despite the architecture spec requiring that reserved registers in the GIC
distributor memory map are RES0 (and thus are not allowed to generate
an exception), the Cavium ThunderX (aka TX1) SoC explodes as such:

[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 128 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956
[    0.000000] Hardware name: cavium,thunder-88xx (DT)
[    0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
[    0.000000] pc : __raw_readl+0x0/0x8
[    0.000000] lr : gic_init_bases+0x110/0x560
[    0.000000] sp : ffff800011243d90
[    0.000000] x29: ffff800011243d90 x28: 0000000000000000
[    0.000000] x27: 0000000000000018 x26: 0000000000000002
[    0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80
[    0.000000] x23: 0000000000000000 x22: ffff010fdc322b68
[    0.000000] x21: ffff800010a7a208 x20: 00000000009b0404
[    0.000000] x19: ffff80001124dad0 x18: 0000000000000010
[    0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af
[    0.000000] x15: ffffffffffffffff x14: ffff800011249908
[    0.000000] x13: ffff800091243ae7 x12: ffff800011243af4
[    0.000000] x11: ffff80001126e000 x10: ffff800011243a70
[    0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828
[    0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1
[    0.000000] x5 : 0000000000000001 x4 : 0000000000000000
[    0.000000] x3 : 0000000000000000 x2 : 0000000000000000
[    0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c
[    0.000000] Call trace:
[    0.000000]  __raw_readl+0x0/0x8
[    0.000000]  gic_of_init+0x188/0x224
[    0.000000]  of_irq_init+0x200/0x3cc
[    0.000000]  irqchip_init+0x1c/0x40
[    0.000000]  init_IRQ+0x160/0x1d0
[    0.000000]  start_kernel+0x2ec/0x4b8
[    0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000)

when reading the GICv4.1 GICD_TYPER2 register, which is unexpected...

Work around it by adding a new quirk for the following variants:

 ThunderX: CN88xx
 OCTEON TX: CN83xx, CN81xx
 OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx*

and use this flag to avoid accessing GICD_TYPER2. Note that all
reserved registers (including redistributors and ITS) are impacted
by this erratum, but that only GICD_TYPER2 has to be worked around
so far.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Robert Richter <rrichter@marvell.com>
Tested-by: Mark Salter <msalter@redhat.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Robert Richter <rrichter@marvell.com>
Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org
Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org

Previously all fields of structure kvm_lapic_irq were not initialized
before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause
an issue when any of those fields are used for processing a request.
For example not initializing the msi_redir_hint field before passing
to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of
kvm_apic_map_get_dest_lapic(). This will specifically happen when the
kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage
value of msi_redir_hint, which should not happen as the request belongs
to APIC fixed delivery mode and we do not want to deliver the
interrupt only to the lowest priority candidate.

This patch initializes all the fields of kvm_lapic_irq based on the
values of ioapic redirect_entry object before passing it on to
kvm_bitmap_or_dest_vcpus().

Fixes: 7ee30bc1 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Set level to false since the value doesn't really matter. Suggested
 by Vitaly Kuznetsov. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1.  Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.

Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported.  While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue.  As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.

Note, SGX must be disabled in BIOS to take advantage of this workaround

[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
    globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
    cleared.  Soft disabled meaning disabling SGX without clearing the
    primary CPUID bit (in leaf 0x7) and without poking into non-SGX
    CPU paths, e.g. for the VMCS controls.

Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: Toni Spets <toni.spets@iki.fi>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") accidentally left out the ir_data pointer when
calling modity_irte_ga(), which causes the function amd_iommu_update_ga()
to return prematurely due to struct amd_ir_data.ref is NULL and
the "is_run" bit of IRTE does not get updated properly.

This results in bad I/O performance since IOMMU AVIC always generate GA Log
entry and notify IOMMU driver and KVM when it receives interrupt from the
PCI pass-through device instead of directly inject interrupt to the vCPU.

Fixes by passing ir_data when calling modify_irte_ga() as done previously.

Fixes: b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

VMD subdevices are created with a PCI domain ID of 0x10000 or
higher.

These subdevices are also handled like all other PCI devices by
dmar_pci_bus_notifier().

However, when dmar_alloc_pci_notify_info() take records of such devices,
it will truncate the domain ID to a u16 value (in info->seg).
The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if
it is 0000:00:02.0.

In the unlucky event that a real device also exists at 0000:00:02.0 and
also has a device-specific entry in the DMAR table,
dmar_insert_dev_scope() will crash on:
   BUG_ON(i >= devices_cnt);

That's basically a sanity check that only one PCI device matches a
single DMAR entry; in this case we seem to have two matching devices.

Fix this by ignoring devices that have a domain number higher than
what can be looked up in the DMAR table.

This problem was carefully diagnosed by Jian-Hong Pan.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 59ce0515 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens")
Signed-off-by: Joerg Roedel <jroedel@suse.de>

When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.

This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in drivers: ipr and ufs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ipr: Fix softlockup when rescanning devices in petitboot
  scsi: ufs: Fix possible unclocked access to auto hibern8 timer register

Pull NFS client bugfixes from Anna Schumaker:
 "These are mostly fscontext fixes, but there is also one that fixes
  collisions seen in fscache:

   - Ensure the fs_context has the correct fs_type when mounting and
     submounting

   - Fix leaking of ctx->nfs_server.hostname

   - Add minor version to fscache key to prevent collisions"

* tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  nfs: add minor version to nfs_server_key for fscache
  NFS: Fix leak of ctx->nfs_server.hostname
  NFS: Don't hard-code the fs_type when submounting
  NFS: Ensure the fs_context has the correct fs_type before mounting

Pull fuse fix from Miklos Szeredi:
 "Fix an Oops introduced in v5.4"

* tag 'fuse-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix stack use after return

Pull overlayfs fixes from Miklos Szeredi:
 "Fix three bugs introduced in this cycle"

* tag 'ovl-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix lockdep warning for async write
  ovl: fix some xino configurations
  ovl: fix lock in ovl_llseek()

Pull power management fix from Rafael Wysocki:
 "Fix cpupower utility build failures with -fno-common enabled (Mike
  Gilbert)"

* tag 'pm-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpupower: avoid multiple definition with gcc -fno-common

Pull io_uring fix from Jens Axboe:
 "Just a single fix here, improving the RCU callback ordering from last
  week. After a bit more perusing by Paul, he poked a hole in the
  original"

* tag 'io_uring-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
  io_uring: ensure RCU callback ordering with rcu_barrier()

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release. This contains:

   - Fix for a corruption issue with the s390 dasd driver (Stefan)

   - Fixup/improvement for the flush insertion change that we had in
     this series (Ming)

   - Fix for the partition suppor for host aware zoned devices
     (Shin'ichiro)

   - Fix incorrect blk-iocost comparison (Tejun)

  The diffstat looks large, but that's a) mostly dasd, and b) the flush
  fix from Ming adds a big comment"

* tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
  block: Fix partition support for host aware zoned block devices
  blk-mq: insert flush request to the front of dispatch queue
  s390/dasd: fix data corruption for thin provisioned devices
  blk-iocost: fix incorrect vtime comparison in iocg_is_idle()

Pull MMC fixes from Ulf Hansson:
 "MMC core:

   - Fix HW busy detection support for host controllers requiring the
     MMC_RSP_BUSY response flag (R1B) to be set for the command. In
     particular for CMD6 (eMMC), erase/trim/discard (SD/eMMC) and CMD5
     (eMMC sleep).

  MMC host:

   - sdhci-omap|tegra: Fix support for HW busy detection"

* tag 'mmc-v5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
  mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
  mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
  mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
  mmc: core: Allow host controllers to require R1B for CMD6

afs_put_addrlist() casts kfree() to rcu_callback_t. Apart from being wrong
in theory, this might also blow up when people start enforcing function
types via compiler instrumentation, and it means the rcu_head has to be
first in struct afs_addr_list.

Use kfree_rcu() instead, it's simpler and more correct.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'at24-fixes-for-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current

at24 fixes for v5.6-rc6

- fix regulator underflow bug introduced during the v5.6 merge window

Lockdep reports "WARNING: lock held when returning to user space!" due to
async write holding freeze lock over the write.  Apparently aio.c already
deals with this by lying to lockdep about the state of the lock.

Do the same here.  No need to check for S_IFREG() here since these file ops
are regular-only.

Reported-by: syzbot+9331a354f4f624a52a55@syzkaller.appspotmail.com
Fixes: 2406a307 ("ovl: implement async IO routines")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Fix up two bugs in the coversion to xino_mode:
1. xino=off does not always end up in disabled mode
2. xino=auto on 32bit arch should end up in disabled mode

Take a proactive approach to disabling xino on 32bit kernel:
1. Disable XINO_AUTO config during build time
2. Disable xino with a warning on mount time

As a by product, xino=on on 32bit arch also ends up in disabled mode.
We never intended to enable xino on 32bit arch and this will make the
rest of the logic simpler.

Fixes: 0f831ec8 ("ovl: simplify ovl_same_sb() helper")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The vector management code assumes that managed interrupts cannot be
migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE()
which triggers when a managed interrupt vector association on a online CPU
is cleared. The CPU offline code uses a different mechanism which cannot
trigger this.

This assumption is not longer correct because the new CPU isolation feature
which affects the placement of managed interrupts must be able to move a
managed interrupt away from an online CPU.

There are two reasons why this can happen:

  1) When the interrupt is activated the affinity mask which was
     established in irq_create_affinity_masks() is handed in to
     the vector allocation code. This mask contains all CPUs to which
     the interrupt can be made affine to, but this does not take the
     CPU isolation 'managed_irq' mask into account.

     When the interrupt is finally requested by the device driver then the
     affinity is checked again and the CPU isolation 'managed_irq' mask is
     taken into account, which moves the interrupt to a non-isolated CPU if
     possible.

  2) The interrupt can be affine to an isolated CPU because the
     non-isolated CPUs in the calculated affinity mask are not online.

     Once a non-isolated CPU which is in the mask comes online the
     interrupt is migrated to this non-isolated CPU

In both cases the regular online migration mechanism is used which triggers
the WARN_ON_ONCE() in free_moved_vector().

Case #1 could have been addressed by taking the isolation mask into
account, but that would require a massive code change in the activation
logic and the eventual migration event was accepted as a reasonable
tradeoff when the isolation feature was developed. But even if #1 would be
addressed, #2 would still trigger it.

Of course the warning in free_moved_vector() was overlooked at that time
and the above two cases which have been discussed during patch review have
obviously never been tested before the final submission.

So keep it simple and remove the warning.

[ tglx: Rewrote changelog and added a comment to free_moved_vector() ]

Fixes: 11ea68f5 ("genirq, sched/isolation: Isolate from handling managed interrupts")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>                                                                                                                                                                       
Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com

i2c_verify_client() can fail, so we need to put the device when that
happens.

Fixes: 525e6fab ("i2c / ACPI: add support for ACPI reconfigure notifications")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Commit 6825d3ea ("iommu/vt-d: Add debugfs support to show register
contents") dumps the register contents for all IOMMU devices.

Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers,
even though some of the registers are 32 bits, which is incorrect.

Use the correct read function variant (dmar_readl/dmar_readq) while
reading the contents of 32/64 bit registers respectively.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.comAcked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>