- 16 Jan, 2018 17 commits
-
-
Liran Alon authored
Before each vmentry to guest, vcpu_enter_guest() calls sync_pir_to_irr() which calls vmx_hwapic_irr_update() to update RVI. Currently, vmx_hwapic_irr_update() contains a tweak in case it is called when CPU is running L2 and L1 don't intercept external-interrupts. In that case, code injects interrupt directly into L2 instead of updating RVI. Besides being hacky (wouldn't expect function updating RVI to also inject interrupt), it also doesn't handle this case correctly. The code contains several issues: 1. When code calls kvm_queue_interrupt() it just passes it max_irr which represents the highest IRR currently pending in L1 LAPIC. This is problematic as interrupt was injected to guest but it's bit is still set in LAPIC IRR instead of being cleared from IRR and set in ISR. 2. Code doesn't check if LAPIC PPR is set to accept an interrupt of max_irr priority. It just checks if interrupts are enabled in guest with vmx_interrupt_allowed(). To fix the above issues: 1. Simplify vmx_hwapic_irr_update() to just update RVI. Note that this shouldn't happen when CPU is running L2 (See comment in code). 2. Since now vmx_hwapic_irr_update() only does logic for L1 virtual-interrupt-delivery, inject_pending_event() should be the one responsible for injecting the interrupt directly into L2. Therefore, change kvm_cpu_has_injectable_intr() to check L1 LAPIC when CPU is running L2. 3. Change vmx_sync_pir_to_irr() to set KVM_REQ_EVENT when L1 has a pending injectable interrupt. Fixes: 963fee16 ("KVM: nVMX: Fix virtual interrupt delivery injection") Signed-off-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by:
Liam Merwick <liam.merwick@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Liran Alon authored
In case posted-interrupt was delivered to CPU while it is in host (outside guest), then posted-interrupt delivery will be done by calling sync_pir_to_irr() at vmentry after interrupts are disabled. sync_pir_to_irr() will check vmx->pi_desc.control ON bit and if set, it will sync vmx->pi_desc.pir to IRR and afterwards update RVI to ensure virtual-interrupt-delivery will dispatch interrupt to guest. However, it is possible that L1 will receive a posted-interrupt while CPU runs at host and is about to enter L2. In this case, the call to sync_pir_to_irr() will indeed update the L1's APIC IRR but vcpu_enter_guest() will then just resume into L2 guest without re-evaluating if it should exit from L2 to L1 as a result of this new pending L1 event. To address this case, if sync_pir_to_irr() has a new L1 injectable interrupt and CPU is running L2, we force exit GUEST_MODE which will result in another iteration of vcpu_run() run loop which will call kvm_vcpu_running() which will call check_nested_events() which will handle the pending L1 event properly. Signed-off-by:
-
Liran Alon authored
This commit doesn't change semantics. It is done as a preparation for future commits. Signed-off-by:
-
Liran Alon authored
sync_pir_to_irr() is only called if vcpu->arch.apicv_active()==true. In case it is false, VMX code make sure to set sync_pir_to_irr to NULL. Therefore, having SVM stubs allows to remove check for if sync_pir_to_irr != NULL from all calling sites. Signed-off-by:
-
Liran Alon authored
kvm_clear_exception_queue() should clear pending exception. This also includes exceptions which were only marked pending but not yet injected. This is because exception.pending is used for both L1 and L2 to determine if an exception should be raised to guest. Note that an exception which is pending but not yet injected will be raised again once the guest will be resumed. Consider the following scenario: 1) L0 KVM with ignore_msrs=false. 2) L1 prepare vmcs12 with the following: a) No intercepts on MSR (MSR_BITMAP exist and is filled with 0). b) No intercept for #GP. c) vmx-preemption-timer is configured. 3) L1 enters into L2. 4) L2 reads an unhandled MSR that exists in MSR_BITMAP (such as 0x1fff). L2 RDMSR could be handled as described below: 1) L2 exits to L0 on RDMSR and calls handle_rdmsr(). 2) handle_rdmsr() calls kvm_inject_gp() which sets KVM_REQ_EVENT, exception.pending=true and exception.injected=false. 3) vcpu_enter_guest() consumes KVM_REQ_EVENT and calls inject_pending_event() which calls vmx_check_nested_events() which sees that exception.pending=true but nested_vmx_check_exception() returns 0 and therefore does nothing at this point. However let's assume it later sees vmx-preemption-timer expired and therefore exits from L2 to L1 by calling nested_vmx_vmexit(). 4) nested_vmx_vmexit() calls prepare_vmcs12() which calls vmcs12_save_pending_event() but it does nothing as exception.injected is false. Also prepare_vmcs12() calls kvm_clear_exception_queue() which does nothing as exception.injected is already false. 5) We now return from vmx_check_nested_events() with 0 while still having exception.pending=true! 6) Therefore inject_pending_event() continues and we inject L2 exception to L1!... This commit will fix above issue by changing step (4) to clear exception.pending in kvm_clear_exception_queue(). Fixes: 664f8e26 ("KVM: X86: Fix loss of exception which has not yet been injected") Signed-off-by: -
Borislav Petkov authored
... just like in vmx_set_msr(). No functionality change. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Haozhong Zhang authored
Some reserved pages, such as those from NVDIMM DAX devices, are not for MMIO, and can be mapped with cached memory type for better performance. However, the above check misconceives those pages as MMIO. Because KVM maps MMIO pages with UC memory type, the performance of guest accesses to those pages would be harmed. Therefore, we check the host memory type in addition and only treat UC/UC-/WC pages as MMIO. Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Reported-by:
Cuevas Escareno, Ivan D <ivan.d.cuevas.escareno@intel.com> Reported-by:
Kumar, Karthik <karthik.kumar@intel.com> Reviewed-by:
Xiao Guangrong <xiaoguangrong@tencent.com> Signed-off-by:
-
Haozhong Zhang authored
Check whether the PAT memory type of a pfn cannot be overridden by MTRR UC memory type, i.e. the PAT memory type is UC, UC- or WC. This function will be used by KVM to distinguish MMIO pfns and give them UC memory type in the EPT page tables (on Intel processors, EPT memory types work like MTRRs). Signed-off-by:
-
Paolo Bonzini authored
Topic branch for CVE-2017-5753, avoiding conflicts in the next merge window.
-
Paolo Bonzini authored
Avoid reverse dependencies. Instead, SEV will only be enabled if the PSP driver is available. Signed-off-by:
-
https://github.com/codomania/kvmPaolo Bonzini authored
This part of Secure Encrypted Virtualization (SEV) patch series focuses on KVM changes required to create and manage SEV guests. SEV is an extension to the AMD-V architecture which supports running encrypted virtual machine (VMs) under the control of a hypervisor. Encrypted VMs have their pages (code and data) secured such that only the guest itself has access to unencrypted version. Each encrypted VM is associated with a unique encryption key; if its data is accessed to a different entity using a different key the encrypted guest's data will be incorrectly decrypted, leading to unintelligible data. This security model ensures that hypervisor will no longer able to inspect or alter any guest code or data. The key management of this feature is handled by a separate processor known as the AMD Secure Processor (AMD-SP) which is present on AMD SOCs. The SEV Key Management Specification (see below) provides a set of commands which can be used by hypervisor to load virtual machine keys through the AMD-SP driver. The patch series adds a new ioctl in KVM driver (KVM_MEMORY_ENCRYPT_OP). The ioctl will be used by qemu to issue SEV guest-specific commands defined in Key Management Specification. The following links provide additional details: AMD Memory Encryption white paper: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf AMD64 Architecture Programmer's Manual: http://support.amd.com/TechDocs/24593.pdf SME is section 7.10 SEV is section 15.34 SEV Key Management: http://support.amd.com/TechDocs/55766_SEV-KM API_Specification.pdf KVM Forum Presentation: http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf SEV Guest BIOS support: SEV support has been add to EDKII/OVMF BIOS https://github.com/tianocore/edk2Signed-off-by:
-
Paolo Bonzini authored
xsetbv can be expensive when running on nested virtualization, try to avoid it. Reviewed-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by:
Quan Xu <quan.xu0@gmail.com> Signed-off-by:
-
Wanpeng Li authored
syzkaller reported: WARNING: CPU: 0 PID: 12927 at arch/x86/kernel/traps.c:780 do_debug+0x222/0x250 CPU: 0 PID: 12927 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #16 RIP: 0010:do_debug+0x222/0x250 Call Trace: <#DB> debug+0x3e/0x70 RIP: 0010:copy_user_enhanced_fast_string+0x10/0x20 </#DB> _copy_from_user+0x5b/0x90 SyS_timer_create+0x33/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The testcase sets a watchpoint (with perf_event_open) on a buffer that is passed to timer_create() as the struct sigevent argument. In timer_create(), copy_from_user()'s rep movsb triggers the BP. The testcase also sets the debug registers for the guest. However, KVM only restores host debug registers when the host has active watchpoints, which triggers a race condition when running the testcase with multiple threads. The guest's DR6.BS bit can escape to the host before another thread invokes timer_create(), and do_debug() complains. The fix is to respect do_debug()'s dr6 invariant when leaving KVM. Reported-by:Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Wanpeng Li authored
When running on a virtual machine, IPIs are expensive when the target CPU is sleeping. Thus, it is nice to be able to avoid them for TLB shootdowns. KVM can just do the flush via INVVPID on the guest's behalf the next time the CPU is scheduled. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Wanpeng Li authored
Introduce a new bool invalidate_gpa argument to kvm_x86_ops->tlb_flush, it will be used by later patches to just flush guest tlb. For VMX, this will use INVVPID instead of INVEPT, which will invalidate combined mappings while keeping guest-physical mappings. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Wanpeng Li authored
Remote TLB flush does a busy wait which is fine in bare-metal scenario. But with-in the guest, the vcpus might have been pre-empted or blocked. In this scenario, the initator vcpu would end up busy-waiting for a long amount of time; it also consumes CPU unnecessarily to wake up the target of the shootdown. This patch set adds support for KVM's new paravirtualized TLB flush; remote TLB flush does not wait for vcpus that are sleeping, instead KVM will flush the TLB as soon as the vCPU starts running again. The improvement is clearly visible when the host is overcommitted; in this case, the PV TLB flush (in addition to avoiding the wait on the main CPU) prevents preempted vCPUs from stealing precious execution time from the running ones. Testing on a Xeon Gold 6142 2.6GHz 2 sockets, 32 cores, 64 threads, so 64 pCPUs, and each VM is 64 vCPUs. ebizzy -M vanilla optimized boost 1VM 46799 48670 4% 2VM 23962 42691 78% 3VM 16152 37539 132% Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: -
Wanpeng Li authored
The next patch will add another bit to the preempted field in kvm_steal_time. Define a constant for bit 0 (the only one that is currently used). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
- 11 Jan, 2018 1 commit
-
-
Andrew Honig authored
This adds a memory barrier when performing a lookup into the vmcs_field_to_offset_table. This is related to CVE-2017-5753. Signed-off-by:
Andrew Honig <ahonig@google.com> Reviewed-by:
-
- 14 Dec, 2017 22 commits
-
-
Paolo Bonzini authored
After the vcpu_load/vcpu_put pushdown, the handling of asynchronous VCPU ioctl is already much clearer in that it is obvious that they bypass vcpu_load and vcpu_put. However, it is still not perfect in that the different state of the VCPU mutex is still hidden in the caller. Separate those ioctls into a new function kvm_arch_vcpu_async_ioctl that returns -ENOIOCTLCMD for more "traditional" synchronous ioctls. Cc: James Hogan <jhogan@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Suggested-by:
-
Christoffer Dall authored
Move the calls to vcpu_load() and vcpu_put() in to the architecture specific implementations of kvm_arch_vcpu_ioctl() which dispatches further architecture-specific ioctls on to other functions. Some architectures support asynchronous vcpu ioctls which cannot call vcpu_load() or take the vcpu->mutex, because that would prevent concurrent execution with a running VCPU, which is the intended purpose of these ioctls, for example because they inject interrupts. We repeat the separate checks for these specifics in the architecture code for MIPS, S390 and PPC, and avoid taking the vcpu->mutex and calling vcpu_load for these ioctls. Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_fpu(). Reviewed-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_get_fpu(). Reviewed-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_guest_debug(). Reviewed-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_translate(). Reviewed-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_mpstate(). Reviewed-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_get_mpstate(). Reviewed-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_sregs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_get_sregs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_regs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_get_regs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_run(). Signed-off-by:
-
Christoffer Dall authored
In preparation for moving calls to vcpu_load() and vcpu_put() into the architecture specific implementations of the KVM vcpu ioctls, move the calls in the main kvm_vcpu_ioctl() dispatcher function to each case of the ioctl select statement. This allows us to move the vcpu_load() and vcpu_put() calls into architecture specific implementations of vcpu ioctls, one by one. Reviewed-by:
-
Christoffer Dall authored
As we're about to call vcpu_load() from architecture-specific implementations of the KVM vcpu ioctls, but yet we access data structures protected by the vcpu->mutex in the generic code, factor this logic out from vcpu_load(). x86 is the only architecture which calls vcpu_load() outside of the main vcpu ioctl function, and these calls will no longer take the vcpu mutex following this patch. However, with the exception of kvm_arch_vcpu_postcreate (see below), the callers are either in the creation or destruction path of the VCPU, which means there cannot be any concurrent access to the data structure, because the file descriptor is not yet accessible, or is already gone. kvm_arch_vcpu_postcreate makes the newly created vcpu potentially accessible by other in-kernel threads through the kvm->vcpus array, and we therefore take the vcpu mutex in this case directly. Signed-off-by:
-
Quan Xu authored
Since KVM removes the only I/O port 0x80 bypass on Intel hosts, clear CPU_BASED_USE_IO_BITMAPS and set CPU_BASED_UNCOND_IO_EXITING bit. Then these I/O permission bitmaps are not used at all, so drop I/O permission bitmaps. Signed-off-by:
™ <rkrcmar@redhat.com> Signed-off-by: -
Wanpeng Li authored
When I run ebizzy in a 32 vCPUs guest on a 32 pCPUs Xeon box, I can observe ~8000 kvm_wait_lapic_expire CurAvg/s through kvm_stat tool even if the advance tscdeadline hrtimer expiration is disabled. Each call to wait_lapic_expire() will consume ~70 cycles when a timer fires since apic_timer_expire() will set expired_tscdeadline and then wait_lapic_expire() will do some caculation before bailing out. So total ~175us per second is lost on this 3.2Ghz machine. This patch reduces the overhead by skipping the function wait_lapic_expire() when lapic_timer_advance is disabled. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
MSR_IA32_DEBUGCTLMSR is zeroed on VMEXIT, so it is saved/restored each time during world switch. This patch caches the host IA32_DEBUGCTL MSR and saves/restores the host IA32_DEBUGCTL msr when guest/host switches to avoid to save/restore each time during world switch. This saves about 100 clock cycles per vmexit. Suggested-by:
-
Mark Kanda authored
When attempting to free a loaded VMCS02, add a WARN and avoid freeing it (to avoid use-after-free situations). Suggested-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
Ameya More <ameya.more@oracle.com> Reviewed-by:
-
Jim Mattson authored
The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Signed-off-by:
-
Yang Zhong authored
Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/ VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features need expose to guest VM. The bit definition: CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2 CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf The kernel dependency commit in kvm.git: (c128dbfa) Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Signed-off-by:
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
