- 13 Aug, 2009 24 commits
-
-
Sathya Perla authored
Any events rcvd after interrupts are disabled (in the driver unload path), must be cleared and notified before the event queues are destroyed Signed-off-by:
Sathya Perla <sathyap@serverengines.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Using "for(tail != head)" to traverse a queue from tail to head fails in the case of a fully filled queue. Use "for(used != 0)" instead. Signed-off-by:
-
Sathya Perla authored
Clear pending tx completions in be_close() (ndo.stop method) so that after unregister_netdev() calls be_close(), all tx skbs are freed and there are no more tx completions when txq is destroyed. Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/net/smc911x.h: mach/dma.h is included more than once. Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: include/linux/icmpv6.h: linux/skbuff.h is included more than once. Signed-off-by:
-
Brice Goglin authored
Improve myri10ge parity error detection and recovery: 1) Don't restore PCI config space to a rebooted NIC until AFTER the host is quiescent. 2) Let myri10ge_close() know the NIC is dead, so it won't waste time waiting for a dead nic to respond to MXGEFW_CMD_ETHERNET_DOWN 3) When the NIC is quiet (link down, or otherwise idle link) use a pci config space read to detect a rebooted NIC. Otherwise we might never notice that a NIC rebooted Signed-off-by:
Andrew Gallatin <gallatin@myri.com> Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Julia Lawall authored
request_mem_region should be used with release_mem_region, not request_region. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r2@ expression start; @@ request_mem_region(start,...) @b2@ expression r2.start; @@ request_region(start,...) @depends on !b2@ expression r2.start; expression E; @@ - release_region + release_mem_region (start,E) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/net/pcmcia/axnet_cs.c: linux/etherdevice.h is included more than once. Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/net/cs89x0.c: asm/irq.h is included more than once. Signed-off-by:
-
Julia Lawall authored
In general in this file, it is the status field, not the state field, that contains values like OPEN and CLOSED. Indeed, in the first error case, it is the field status that is initialized. I have thus assumed that all of the error handling code should be the same, and moved it to the end of the function to emphasize its commonality. Signed-off-by:
-
Julia Lawall authored
In this series of tests the constants have the form XRXMAC_STATUS, except in this one case. The values of XRXMAC_STAT_MSK_RXOCTET_CNT_EXP and XRXMAC_STATUS_RXOCTET_CNT_EXP are furthermore the same. Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
1) fix ro->bound protection by socket lock 2) make ro->bound bit instead of int Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
IEEE802154_SIOC_ADD_SLAVE was used to allocate 802.15.4 interfaces on the top of radio. It's not used anymore, drop it. Signed-off-by:
-
Mark Smith authored
In all rx'd SKB cases, atalk_rcv() either eventually jumps to or falls through to the label out:, which returns numeric 0. Numeric 0 corresponds to NET_RX_SUCCESS, which is incorrect in failed SKB cases. This patch makes atalk_rcv() provide the correct returns by: o explicitly returning NET_RX_SUCCESS in the two success cases o having the out: label return NET_RX_DROP, instead of numeric 0 o making the failed SKB labels and processing more consistent with other _rcv() routines in the kernel, simplifying validation and removing a backwards goto Signed-off-by:Mark Smith <markzzzsmith@yahoo.com.au> Signed-off-by:
-
Rémi Denis-Courmont authored
Instead of a large (physically) linear buffer, we generate a set of paged sk_buff, so no extra memory copy is involved. This removes high-order allocations and saves quite a bit of memory. Phonet MTU is 65541 bytes, so the two buffers were padded to 128 kilo-bytes each. Now, we create 17 page buffers, almost a 75% memory use reduction. Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Rémi Denis-Courmont authored
With the current driver, the MTU is purely indicative, so there is no need to synchronize with the receive path. Signed-off-by:
-
David S. Miller authored
Conflicts: arch/microblaze/include/asm/socket.h
-
David S. Miller authored
This reverts commit 57921c31. On request from John Linville: It has been shown to create a new problem. There is work towards a solution to that one, but it isn't a simple clean-up. Signed-off-by:
-
- 12 Aug, 2009 1 commit
-
-
Cyrill Gorcunov authored
pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
- 10 Aug, 2009 15 commits
-
-
Dan Carpenter authored
queue == __AR9170_NUM_TXQ would cause a bug on the next line. found by Smatch ( http://repo.or.cz/w/smatch.git ). Cc: stable@kernel.org Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
When ar9170-2.fw was missing, the driver erroneously complained about missing the initialization values file ar9170-1.fw... Signed-off-by:
-
roel kluin authored
If the length is less or equal to frag_prefix_size in the first iteration we write skb_frags_rx[-1] and read from priv->frag_info[-1] Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
roel kluin authored
Prevent read from cards[-1] when no card was found. Signed-off-by:
-
roel kluin authored
An `options[cards_found]' that equals `sizeof(options_mapping)' is already beyond the array. Signed-off-by:
-
Rafael Laufer authored
Commit 1748376b, net: Use a percpu_counter for sockets_allocated added percpu_counter function calls to sctp_proc_init code path, but forgot to add them to sctp_proc_exit(). This resulted in a following Ooops when performing this test # modprobe sctp # rmmod -f sctp # modprobe sctp [ 573.862512] BUG: unable to handle kernel paging request at f8214a24 [ 573.862518] IP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 [ 573.862530] *pde = 37010067 *pte = 00000000 [ 573.862534] Oops: 0002 [#1] SMP [ 573.862537] last sysfs file: /sys/module/libcrc32c/initstate [ 573.862540] Modules linked in: sctp(+) crc32c libcrc32c binfmt_misc bridge stp bnep lp snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss arc4 joydev snd_pcm ecb pcmcia snd_seq_dummy snd_seq_oss iwlagn iwlcore snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket rsrc_nonstatic thinkpad_acpi snd_seq snd_timer snd_seq_device mac80211 psmouse sdhci_pci sdhci nvidia(P) ppdev video snd soundcore serio_raw pcspkr iTCO_wdt iTCO_vendor_support led_class ricoh_mmc pcmcia_core intel_agp nvram agpgart usbhid parport_pc parport output snd_page_alloc cfg80211 btusb ohci1394 ieee1394 e1000e [last unloaded: sctp] [ 573.862589] [ 573.862593] Pid: 5373, comm: modprobe Tainted: P R (2.6.31-rc3 #6) 7663B15 [ 573.862596] EIP: 0060:[<c0308b8f>] EFLAGS: 00010286 CPU: 1 [ 573.862599] EIP is at __percpu_counter_init+0x3f/0x70 [ 573.862602] EAX: f8214a20 EBX: f80faa14 ECX: c48c0000 EDX: f80faa20 [ 573.862604] ESI: f80a7000 EDI: 00000000 EBP: f69d5ef0 ESP: f69d5eec [ 573.862606] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 573.862610] Process modprobe (pid: 5373, ti=f69d4000 task=c2130c70 task.ti=f69d4000) [ 573.862612] Stack: [ 573.862613] 00000000 f69d5f18 f80a70a8 f80fa9fc 00000000 fffffffc f69d5f30 c018e2d4 [ 573.862619] <0> 00000000 f80a7000 00000000 f69d5f88 c010112b 00000000 c07029c0 fffffffb [ 573.862626] <0> 00000000 f69d5f38 c018f83f f69d5f54 c0557cad f80fa860 00000001 c07010c0 [ 573.862634] Call Trace: [ 573.862644] [<f80a70a8>] ? sctp_init+0xa8/0x7d4 [sctp] [ 573.862650] [<c018e2d4>] ? marker_update_probe_range+0x184/0x260 [ 573.862659] [<f80a7000>] ? sctp_init+0x0/0x7d4 [sctp] [ 573.862662] [<c010112b>] ? do_one_initcall+0x2b/0x160 [ 573.862666] [<c018f83f>] ? tracepoint_module_notify+0x2f/0x40 [ 573.862671] [<c0557cad>] ? notifier_call_chain+0x2d/0x70 [ 573.862678] [<c01588fd>] ? __blocking_notifier_call_chain+0x4d/0x60 [ 573.862682] [<c016b2f1>] ? sys_init_module+0xb1/0x1f0 [ 573.862686] [<c0102ffc>] ? sysenter_do_call+0x12/0x28 [ 573.862688] Code: 89 48 08 b8 04 00 00 00 e8 df aa ec ff ba f4 ff ff ff 85 c0 89 43 14 74 31 b8 b0 18 71 c0 e8 19 b9 24 00 a1 c4 18 71 c0 8d 53 0c <89> 50 04 89 43 0c b8 b0 18 71 c0 c7 43 10 c4 18 71 c0 89 15 c4 [ 573.862725] EIP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 SS:ESP 0068:f69d5eec [ 573.862730] CR2: 00000000f8214a24 [ 573.862734] ---[ end trace 39c4e0b55e7cf54d ]--- Signed-off-by:
Rafael Laufer <rlaufer@cisco.com> Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Yong Zhang authored
If vlan has been enabled. ifdown followed by ifup will lost hardware related state. Also remove duplicated operation in gfar_vlan_rx_register(). Signed-off-by:
Yong Zhang <yong.zhang0@gmail.com> Acked-by:
Dai Haruki <dai.haruki@freescale.com> Signed-off-by:
-
Bruce Allan authored
The bank offset was being incorrectly calculated on ICH9 parts with a bank size of 8K (instead of the more common 4K bank) which would cause any NVM writes to be done on the wrong address after switching from bank 1 to bank 0. Additionally, assume we are meant to use bank 0 if a valid bank is not detected, and remove the unnecessary acquisition of the SW/FW/HW semaphore when writing to the shadow ram version of the NVM image. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bruce Allan authored
For ICHx parts, write the EXTCNF_CTRL.SWFLAG bit once when trying to acquire the SW/FW/HW semaphore instead of multiple times to prevent the hardware from having problems (especially for systems with manageability enabled), and extend the timeout for the hardware to set the SWFLAG bit. Signed-off-by:
-
Yi Zou authored
For 82599, packet split has to be disabled for FCoE direct data placement. However, this is only required on received queues allocated for FCoE. This patch adds a per ring flags to indicate if packet split is disabled on a per queue basis, particularly for FCoE, as packet split must be disabled for large receive using direct data placement (DDP). Signed-off-by:
Yi Zou <yi.zou@intel.com> Acked-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
Yi Zou authored
Instead of passing the register index of the corresponding rx_ring and find the way back to get to corresponding rx_ring in ixgbe_configure_srrctl(), simplify the function ixgbe_configure_srrctl() by passing the rx_ring into it. Then the register index for that rx_ring is already available from rx_ring->reg_idx. Signed-off-by:
-
Herbert Xu authored
As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Greg Ungerer authored
Commit f0b3fbea ("FEC Buffer rework") breaks transmission of packets where the skb data buffer is not memory aligned according to FEC_ALIGNMENT. It incorrectly passes to dma_sync_single() the buffer address directly from the skb, instead of the address calculated for use (which may be the skb address or one of the bounce buffers). It seems there is no use converting the cpu address of the buffer to a physical either, since dma_map_single() expects the cpu address and will return the dma address to use in the descriptor. So remove the use of __pa() on the buffer address as well. This patch is against 2.6.30-rc5. This breakage is a regression over 2.6.30, which does not have this problem. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Eric Dumazet authored
raw_getname() can leak 10 bytes of kernel memory to user (two bytes hole between can_family and can_ifindex, 8 bytes at the end of sockaddr_can structure) Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by:
-
