- 28 Nov, 2012 19 commits
-
-
Gleb Natapov authored
As Frederic pointed idle_cpu() may return false even if async fault happened in the idle task if wake up is pending. In this case the code will try to put idle task to sleep. Fix this by using is_idle_task() to check for idle task. Reported-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Marcelo Tosatti authored
As requested by Glauber, do not update kvmclock area on vcpu->pcpu migration, in case the host has stable TSC. This is to reduce cacheline bouncing. Acked-by:
Glauber Costa <glommer@parallels.com> Signed-off-by:
-
Marcelo Tosatti authored
With master clock, a pvclock clock read calculates: ret = system_timestamp + [ (rdtsc + tsc_offset) - tsc_timestamp ] Where 'rdtsc' is the host TSC. system_timestamp and tsc_timestamp are unique, one tuple per VM: the "master clock". Given a host with synchronized TSCs, its obvious that guest TSC must be matched for the above to guarantee monotonicity. Allow master clock usage only if guest TSCs are synchronized. Signed-off-by: -
Marcelo Tosatti authored
TSC initialization will soon make use of online_vcpus. Signed-off-by: -
Marcelo Tosatti authored
KVM added a global variable to guarantee monotonicity in the guest. One of the reasons for that is that the time between 1. ktime_get_ts(×pec); 2. rdtscll(tsc); Is variable. That is, given a host with stable TSC, suppose that two VCPUs read the same time via ktime_get_ts() above. The time required to execute 2. is not the same on those two instances executing in different VCPUS (cache misses, interrupts...). If the TSC value that is used by the host to interpolate when calculating the monotonic time is the same value used to calculate the tsc_timestamp value stored in the pvclock data structure, and a single <system_timestamp, tsc_timestamp> tuple is visible to all vcpus simultaneously, this problem disappears. See comment on top of pvclock_update_vm_gtod_copy for details. Monotonicity is then guaranteed by synchronicity of the host TSCs and guest TSCs. Set TSC stable pvclock flag in that case, allowing the guest to read clock from userspace. Signed-off-by: -
Marcelo Tosatti authored
Register a notifier for clocksource change event. In case the host switches to clock other than TSC, disable master clock usage. Signed-off-by: -
Marcelo Tosatti authored
As suggested by John, export time data similarly to how its done by vsyscall support. This allows KVM to retrieve necessary information to implement vsyscall support in KVM guests. Acked-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
-
Marcelo Tosatti authored
Allow the caller to pass host tsc value to kvm_x86_ops->read_l1_tsc(). Signed-off-by: -
Marcelo Tosatti authored
Improve performance of time system calls when using Linux pvclock, by reading time info from fixmap visible copy of pvclock data. Originally from Jeremy Fitzhardinge. Signed-off-by: -
Marcelo Tosatti authored
Hook into generic pvclock vsyscall code, with the aim to allow userspace to have visibility into pvclock data. Signed-off-by: -
Marcelo Tosatti authored
Originally from Jeremy Fitzhardinge. Introduce generic, non hypervisor specific, pvclock initialization routines. Signed-off-by: -
Marcelo Tosatti authored
Originally from Jeremy Fitzhardinge. Acked-by:
Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
As noted by Gleb, not advertising SSE2 support implies no RDTSC barriers. Signed-off-by: -
Marcelo Tosatti authored
Acked-by:
-
Marcelo Tosatti authored
Originally from Jeremy Fitzhardinge. So code can be reused. Acked-by:
-
Marcelo Tosatti authored
Originally from Jeremy Fitzhardinge. We can copy the information directly from "struct pvclock_vcpu_time_info", remove pvclock_shadow_time. Reviewed-by:
-
Marcelo Tosatti authored
Originally from Jeremy Fitzhardinge. pvclock_get_time_values, which contains the memory barriers will be removed by next patch. Signed-off-by: -
Marcelo Tosatti authored
We want to expose the pvclock shared memory areas, which the hypervisor periodically updates, to userspace. For a linear mapping from userspace, it is necessary that entire page sized regions are used for array of pvclock structures. There is no such guarantee with per cpu areas, therefore move to memblock_alloc based allocation. Acked-by:
-
Marcelo Tosatti authored
Otherwise its possible for an unrelated KVM_REQ_UPDATE_CLOCK (such as due to CPU migration) to clear the bit. Noticed by Paolo Bonzini. Reviewed-by:
-
- 14 Nov, 2012 3 commits
-
-
Guo Chao authored
No need to check return value before breaking switch. Signed-off-by:
Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by:
-
Guo Chao authored
Return value of this function will be that of ioctl(). #include <stdio.h> #include <linux/kvm.h> int main () { int fd; fd = open ("/dev/kvm", 0); fd = ioctl (fd, KVM_CREATE_VM, 0); ioctl (fd, KVM_SET_TSS_ADDR, 0xfffff000); perror (""); return 0; } Output is "Operation not permitted". That's not what we want. Return -EINVAL in this case. Signed-off-by: -
Guo Chao authored
We should avoid kfree()ing error pointer in kvm_vcpu_ioctl() and kvm_arch_vcpu_ioctl(). Signed-off-by:
-
- 01 Nov, 2012 2 commits
-
-
https://github.com/agraf/linux-2.6Marcelo Tosatti authored
* 'for-queue' of https://github.com/agraf/linux-2.6: PPC: ePAPR: Convert hcall header to uapi (round 2) KVM: PPC: Book3S HV: Fix thinko in try_lock_hpte() KVM: PPC: Book3S HV: Allow DTL to be set to address 0, length 0 KVM: PPC: Book3S HV: Fix accounting of stolen time KVM: PPC: Book3S HV: Run virtual core whenever any vcpus in it can run KVM: PPC: Book3S HV: Fixes for late-joining threads KVM: PPC: Book3s HV: Don't access runnable threads list without vcore lock KVM: PPC: Book3S HV: Fix some races in starting secondary threads KVM: PPC: Book3S HV: Allow KVM guests to stop secondary threads coming online PPC: ePAPR: Convert header to uapi KVM: PPC: Move mtspr/mfspr emulation into own functions KVM: Documentation: Fix reentry-to-be-consistent paragraph KVM: PPC: 44x: fix DCR read/write
-
Joerg Roedel authored
I have no access to my AMD email address anymore. Update entry in MAINTAINERS to the new address. Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
- 31 Oct, 2012 2 commits
-
-
Alexander Graf authored
The new uapi framework splits kernel internal and user space exported bits of header files more cleanly. Adjust the ePAPR header accordingly. Signed-off-by:Alexander Graf <agraf@suse.de>
-
Alexander Graf authored
Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/uapi/asm/Kbuild
-
- 30 Oct, 2012 12 commits
-
-
Paul Mackerras authored
This fixes an error in the inline asm in try_lock_hpte() where we were erroneously using a register number as an immediate operand. The bug only affects an error path, and in fact the code will still work as long as the compiler chooses some register other than r0 for the "bits" variable. Nevertheless it should still be fixed. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
Commit 55b665b0 ("KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areas") includes a check on the length of the dispatch trace log (DTL) to make sure the buffer is at least one entry long. This is appropriate when registering a buffer, but the interface also allows for any existing buffer to be unregistered by specifying a zero address. In this case the length check is not appropriate. This makes the check conditional on the address being non-zero. Signed-off-by:
-
Paul Mackerras authored
Currently the code that accounts stolen time tends to overestimate the stolen time, and will sometimes report more stolen time in a DTL (dispatch trace log) entry than has elapsed since the last DTL entry. This can cause guests to underflow the user or system time measured for some tasks, leading to ridiculous CPU percentages and total runtimes being reported by top and other utilities. In addition, the current code was designed for the previous policy where a vcore would only run when all the vcpus in it were runnable, and so only counted stolen time on a per-vcore basis. Now that a vcore can run while some of the vcpus in it are doing other things in the kernel (e.g. handling a page fault), we need to count the time when a vcpu task is preempted while it is not running as part of a vcore as stolen also. To do this, we bring back the BUSY_IN_HOST vcpu state and extend the vcpu_load/put functions to count preemption time while the vcpu is in that state. Handling the transitions between the RUNNING and BUSY_IN_HOST states requires checking and updating two variables (accumulated time stolen and time last preempted), so we add a new spinlock, vcpu->arch.tbacct_lock. This protects both the per-vcpu stolen/preempt-time variables, and the per-vcore variables while this vcpu is running the vcore. Finally, we now don't count time spent in userspace as stolen time. The task could be executing in userspace on behalf of the vcpu, or it could be preempted, or the vcpu could be genuinely stopped. Since we have no way of dividing up the time between these cases, we don't count any of it as stolen. Signed-off-by:
-
Paul Mackerras authored
Currently the Book3S HV code implements a policy on multi-threaded processors (i.e. POWER7) that requires all of the active vcpus in a virtual core to be ready to run before we run the virtual core. However, that causes problems on reset, because reset stops all vcpus except vcpu 0, and can also reduce throughput since all four threads in a virtual core have to wait whenever any one of them hits a hypervisor page fault. This relaxes the policy, allowing the virtual core to run as soon as any vcpu in it is runnable. With this, the KVMPPC_VCPU_STOPPED state and the KVMPPC_VCPU_BUSY_IN_HOST state have been combined into a single KVMPPC_VCPU_NOTREADY state, since we no longer need to distinguish between them. Signed-off-by:
-
Paul Mackerras authored
If a thread in a virtual core becomes runnable while other threads in the same virtual core are already running in the guest, it is possible for the latecomer to join the others on the core without first pulling them all out of the guest. Currently this only happens rarely, when a vcpu is first started. This fixes some bugs and omissions in the code in this case. First, we need to check for VPA updates for the latecomer and make a DTL entry for it. Secondly, if it comes along while the master vcpu is doing a VPA update, we don't need to do anything since the master will pick it up in kvmppc_run_core. To handle this correctly we introduce a new vcore state, VCORE_STARTING. Thirdly, there is a race because we currently clear the hardware thread's hwthread_req before waiting to see it get to nap. A latecomer thread could have its hwthread_req cleared before it gets to test it, and therefore never increment the nap_count, leading to messages about wait_for_nap timeouts. Signed-off-by:
-
Paul Mackerras authored
There were a few places where we were traversing the list of runnable threads in a virtual core, i.e. vc->runnable_threads, without holding the vcore spinlock. This extends the places where we hold the vcore spinlock to cover everywhere that we traverse that list. Since we possibly need to sleep inside kvmppc_book3s_hv_page_fault, this moves the call of it from kvmppc_handle_exit out to kvmppc_vcpu_run, where we don't hold the vcore lock. In kvmppc_vcore_blocked, we don't actually need to check whether all vcpus are ceded and don't have any pending exceptions, since the caller has already done that. The caller (kvmppc_run_vcpu) wasn't actually checking for pending exceptions, so we add that. The change of if to while in kvmppc_run_vcpu is to make sure that we never call kvmppc_remove_runnable() when the vcore state is RUNNING or EXITING. Signed-off-by:
-
Paul Mackerras authored
Subsequent patches implementing in-kernel XICS emulation will make it possible for IPIs to arrive at secondary threads at arbitrary times. This fixes some races in how we start the secondary threads, which if not fixed could lead to occasional crashes of the host kernel. This makes sure that (a) we have grabbed all the secondary threads, and verified that they are no longer in the kernel, before we start any thread, (b) that the secondary thread loads its vcpu pointer after clearing the IPI that woke it up (so we don't miss a wakeup), and (c) that the secondary thread clears its vcpu pointer before incrementing the nap count. It also removes unnecessary setting of the vcpu and vcore pointers in the paca in kvmppc_core_vcpu_load. Signed-off-by:
-
Paul Mackerras authored
When a Book3S HV KVM guest is running, we need the host to be in single-thread mode, that is, all of the cores (or at least all of the cores where the KVM guest could run) to be running only one active hardware thread. This is because of the hardware restriction in POWER processors that all of the hardware threads in the core must be in the same logical partition. Complying with this restriction is much easier if, from the host kernel's point of view, only one hardware thread is active. This adds two hooks in the SMP hotplug code to allow the KVM code to make sure that secondary threads (i.e. hardware threads other than thread 0) cannot come online while any KVM guest exists. The KVM code still has to check that any core where it runs a guest has the secondary threads offline, but having done that check it can now be sure that they will not come online while the guest is running. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Alexander Graf authored
The new uapi framework splits kernel internal and user space exported bits of header files more cleanly. Adjust the ePAPR header accordingly. Signed-off-by: -
Alexander Graf authored
The mtspr/mfspr emulation code became quite big over time. Move it into its own function so things stay more readable. Signed-off-by: -
Alexander Graf authored
All user space offloaded instruction emulation needs to reenter kvm to produce consistent state again. Fix the section in the documentation to mention all of them. Signed-off-by: -
Alexander Graf authored
When remembering the direction of a DCR transaction, we should write to the same variable that we interpret on later when doing vcpu_run again. Signed-off-by:
-
- 29 Oct, 2012 2 commits
-
-
Xiao Guangrong authored
This patch filters noslot pfn out from error pfns based on Marcelo comment: noslot pfn is not a error pfn After this patch, - is_noslot_pfn indicates that the gfn is not in slot - is_error_pfn indicates that the gfn is in slot but the error is occurred when translate the gfn to pfn - is_error_noslot_pfn indicates that the pfn either it is error pfns or it is noslot pfn And is_invalid_pfn can be removed, it makes the code more clean Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
-
Marcelo Tosatti authored
Merge reason: development work has dependency on kvm patches merged upstream. Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/asm/kvm_para.h Signed-off-by:
-
