- 19 Nov, 2019 40 commits
-
-
Alex Deucher authored
So that the setting reflects what the hw supports. This will be used in a subsequent patch so needs to be correct. v2: squash in fix from Colin Ian King Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Chen Wandun authored
return errno code to caller when error occur, and meanwhile remove gcc '-Wunused-but-set-variable' warning. drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c: In function vegam_populate_smc_boot_level: drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:1364:6: warning: variable result set but not used [-Wunused-but-set-variable] Reviewed-by:
Chen Wandun <chenwandun@huawei.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c:64:13-31: WARNING: dma_alloc_coherent use in ih -> ring already zeroes out memory, so memset is not needed Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
Sam Bobroff authored
The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: 27ae1064 ("drm/amdgpu: add interupt handler implementation for si v3") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: d8f60cfc ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)") Fixes: 25a857fb ("drm/radeon/kms: add support for interrupts on SI") Fixes: a59781bb ("drm/radeon: add support for interrupts on CIK (v5)") Signed-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/radeon_legacy_tv.c: In function radeon_legacy_tv_mode_set: drivers/gpu/drm/radeon/radeon_legacy_tv.c:538:24: warning: variable tv_pll_cntl1 set but not used [-Wunused-but-set-variable] It is introduced by commit 4ce001ab ("drm/radeon/kms: add initial radeon tv-out support."), but never used, so remove it. Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/radeon_combios.c: In function radeon_combios_get_power_modes: drivers/gpu/drm/radeon/radeon_combios.c:2638:10: warning: variable blocks set but not used [-Wunused-but-set-variable] It is introduced by commit 56278a8e ("drm/radeon/kms: pull power mode info from bios tables (v3)"), but never used, so remove it. Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/radeon_display.c: In function radeon_crtc_scaling_mode_fixup: drivers/gpu/drm/radeon/radeon_display.c:1685:27: warning: variable radeon_connector set but not used [-Wunused-but-set-variable] It is not used since commit 377bd8a9 ("drm/radeon: use a fetch function to get the edid") Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/atombios_dp.c: In function radeon_dp_get_panel_mode: drivers/gpu/drm/radeon/atombios_dp.c:415:36: warning: variable dig_connector set but not used [-Wunused-but-set-variable] It is not used since commit 379dfc25 ("drm/radeon/dp: switch to the common i2c over aux code") Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/si_dpm.c: In function si_program_response_times: drivers/gpu/drm/radeon/si_dpm.c:3640:29: warning: variable backbias_response_time set but not used [-Wunused-but-set-variable] It is introduced by commit a9e61410 ("drm/radeon/kms: add dpm support for SI (v7)"), but never used, so remove it. Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/r600_cs.c: In function r600_cs_track_validate_cb: drivers/gpu/drm/radeon/r600_cs.c:353:22: warning: variable size set but not used [-Wunused-but-set-variable] drivers/gpu/drm/radeon/r600_cs.c: In function r600_cs_track_validate_db: drivers/gpu/drm/radeon/r600_cs.c:520:27: warning: variable size set but not used [-Wunused-but-set-variable] drivers/gpu/drm/radeon/r600_cs.c: In function r600_dma_cs_next_reloc: drivers/gpu/drm/radeon/r600_cs.c:2345:26: warning: variable relocs_chunk set but not used [-Wunused-but-set-variable] The first 'size' is not used since commit f30df2fa ("drm/radeon/r600: fix tiling issues in CS checker.") The second 'size' is introduced by commit 88f50c80 ("drm/radeon/kms: add htile support to the cs checker v3"), but never used, so remove it. 'relocs_chunk' is not used since commit 9305ede6 ("radeon/kms: fix dma relocation checking") Reported-by:
-
Mikita Lipski authored
[why] For MST connector atomic check we have to check a new CRTC state instead of an old one, when checking if CRTC is disabled to release VCPI slots allocated. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] static analysis throws the error below Out-of-bounds read (OVERRUN) Overrunning array of 5 bytes at byte offset 7 by dereferencing pointer (uint64_t *)hdcp->auth.msg.hdcp1.bksv. var n is going to contain r0p and bcaps. if they are non-zero the count will be wrong How] Use memcpy instead to avoid this. Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by:
-
Bhawanpreet Lakha authored
[Why] Currently we share rxstatus between HDMI and DP, so we use 16bits The drm defines work with 1bytes at a time. So we need to split the HDMI rxstatus into 2bytes before we can use drm defines [How] -create rxstatus for dp and hdmi. rxstatus for hdmi is split into bytes using arrays. -use drm_hdcp defines for the remaining structs Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] drm already has this define [How] drm Mask is 0x08 vs 0x0800. The reason is because drm mask works on a byte. ^^ =======|| || Since the first byte is always zero we can ignore it and only check the second byte. Signed-off-by: -
Bhawanpreet Lakha authored
[Why] These defines/macros exist already no need to redefine them [How] Use the defines/macros from drm_hdcp.h -we share the rxstatus between HDMI and DP (2 bytes), But upstream defines/macros for HDMI are for 1 byte. So we need to create a separate rxstatus for HDMI Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] The old way was to poll PSP and update the properties. But due to a limitation in the PSP interface this doesn't work for MST. [How] According to PSP if set_encryption return success, the link is encrypted and the only way it will not be is if we get a link loss(which we handle already). So this method should be good enough to report HDCP status. Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] Before we had a disable_type1 flag, this forced HDCP 2.2 to type0 There was no way to force type1. [How] Remove disable_type1 flag and instead add a flag to force type0/1. Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] We need to do this to support HDCP over MST Currently we save a display per link, in a MST case we need to save multiple displays per link. [How] We can create an array per link to cache the displays, but it complicates the design. Instead we can use the module to cache the displays. Now we will always add all the displays to the module, but we use the adjustment flag to disable hdcp on all of them before they are added. When we want to enable hdcp we just query the display(cache), remove it then add it back with different adjustments. Its the similar for disable. Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] HDCP 2.2 uses type0 and type1 content type. This is passed to the receiver to stream the proper content. For example, in a MST case if the main device is HDCP2.2 capable but the secondary device is only 1.4 capabale we can use Type0 Type0 content: use HDCP 1.4 or HDCP2.2 type0 Type1 content: Only use HDCP 2.2 type1 [How] We use the "hdcp content type" property in drm. We use the disable_type1 flag in hdcp module to select the type based on the properties. For updating the property we use the same logic as 1.4, but now we consider content_type as well and update the property if the requirements are met Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] HDCP 2.2 was disabled, we need to enable it [How] -Update display topology to support 2.2 -Unset hdcp2.disable in update_config -Change logic of event_update_property, now we set the property to be ENABLED for any level of encryption (2.2 or 1.4). Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] HDCP is a bit finicky so we try it 3 times, this leads to a case where if we fail the first time and pass the second time the error is still shown in dmesg for the first failed attempt. This leads to false positive errors. [How] Change the logging from ERROR to WARNING. Warnings are still shown in dmesg to know what went wrong. Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] We need to log the state changes for 2.2 This patch extends the existing logging functions to handle HDCP2.2. [How] We do this by adding if/else in the defines, and output the log based on the hdcp version Signed-off-by:
-
Bhawanpreet Lakha authored
The module works like a state machine +-------------+ ------> | Execution.c | ------ | +-------------+ | | V +----+ +--------+ +--------------+ | DM | -----> | Hdcp.c | <------------ | Transition.c | +----+ <----- +--------+ +--------------+ This patch adds the execution and transition files for 2.2 Signed-off-by: -
Bhawanpreet Lakha authored
[Why] We need these to read and write to aux/i2c, during authentication [How] Create read/write functions for all the steps (Eg, h_prime, paring_info etc) Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] All the HDCP transactions should be verified using PSP [How] This patch adds the psp calls we need to verify the steps Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] We need some extra dmub_cmd_type for NV10 [How] Add command table functions in DMUB firmware. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Xiong Yan <Xiong.Yan@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Ilya Bakoulin authored
[Why] Need to be able to enable native 422 for debugging purposes. [How] Add new dc_debug_options bool and check it in the get_dsc_enc_caps function. Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Nikola Cornij authored
[why] When updating DSC config, a new config has to be validated before proceeding with applying the update. Validation, however, modifies the current state. This means DSC config validation would affect pipe re-assignment, causing intermittent screen corruption issues when ODM is required for DSC. [how] - Use a copy of the current state for modified DSC config validation - Set the update type to FULL_UPDATE to correctly validate and set the actual state used for committing the streams Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] DCN will hang if we access registers before PHY init is done. So we need to spin or abort. [How] On hardware with DMCUB running and working we shouldn't time out waiting for this to finish and we shouldn't hit the spin cycle. If there's no hardware support then we should exit out of the function early assuming that PHY init was already done elsewhere. If we hit the timeout then there's likely a bug in firmware or software and we need to debug - add errors and asserts as appropriate. Signed-off-by:
-
Jaehyun Chung authored
[Why] Need validation that we are programming the expected values (rq, ttu, dlg) from DML. This debug feature will output logs if we are programming incorrect values and may help differentiate DAL issues from HW issues. [How] Dump relevant registers for each pipe with active stream. Compare current reg values with the converted DML output. Log mismatches when found. Signed-off-by:
Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
-
Anthony Koo authored
[Why] It is becoming increasingly hard to figure out which function is called on the different DCN versions [How] 1. Make function pointer table init in its own init.c file 2. Remove other scenarios in hwseq.c file that need to include headers of other DCN versions. (If needed, it should have been done via the function pointers) Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] It's an interface violation to use infinite loops within DMUB service functions and we'll lock up the kernel by doing so. [How] Revert the function back to its intended functionality. Move the infinite loops into DC/DM as necessary. Signed-off-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Michael Strauss authored
[WHY] There can be a conflict between OS HDR multiplier and 3dlut HDR multiplier, which are both sent to DC. [HOW] Instead of having dc determine which HDR multiplier to use, make the decision in dm and send only the intended value in a surface update. Store the current OS HDR multiplier and determine whether to use it or the 3dlut's multiplier before sending the surface update to dc. Send multiplier to dc in fixed31_32 format, dc then converts it to hw format. Signed-off-by:
Michael Strauss <michael.strauss@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
David (Dingchen) Zhang authored
[why] need to send immediate SDP message via debugfs on Navi board. [how] hook up the DCN1x encoder function of sending immediate sdp message to DCN2. Signed-off-by:
David (Dingchen) Zhang <dingchen.zhang@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Yongqiang Sun authored
[Why & How] 1. Add trace code enum for easy debugging. 2. Add trace during uC boot up, including loading phy FW and dmcu FW. 3. Change cache memory type back to write back, since write through has issue when resume from S0i3 100% hang after 3.2ms. 4. Change CW3 base address to hard code value to avoid memory overlap with cw1. 5. Change polling phy init done to infinite loop to avoid dcn hang when dmcub uC stalled. 6. Add dmcub FW dis-assembly file to repositatory for debug purpose. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Joshua Aberback authored
[Why] There is a case where the margin is between 50 and 60, but applying the workaround causes a hang. By increasing the threshold, we are blocking more cases from switching p-state during active, but those cases will fall back to switching during blank, which is fine. [How] - increase required margin from 50 to 60 Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
-
Wenjing Liu authored
[why] In the TEST_MSIC dpcd register field definition, the test equipment has the option to choose between YCbCr601 or YCbCr709. We will apply corresponding YCbCr coefficient based on this test request. [how] Add a new input parameter in dc_link_dp_set_test_pattern to allow the selection between different color space. Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
-
Anthony Koo authored
[Why] Too many construct functions which makes searching difficult, especially on some debuggers. [How] Append all construct and destruct functions with dcn number and object type to make each construct function name unique Signed-off-by:
-
