An error occurred fetching the project authors.
- 17 Feb, 2011 9 commits
-
-
Michał Mirosław authored
Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
This introduces a new framework to handle device features setting. It consists of: - new fields in struct net_device: + hw_features - features that hw/driver supports toggling + wanted_features - features that user wants enabled, when possible - new netdev_ops: + feat = ndo_fix_features(dev, feat) - API checking constraints for enabling features or their combinations + ndo_set_features(dev) - API updating hardware state to match changed dev->features - new ethtool commands: + ETHTOOL_GFEATURES/ETHTOOL_SFEATURES: get/set dev->wanted_features and trigger device reconfiguration if resulting dev->features changed + ETHTOOL_GSTRINGS(ETH_SS_FEATURES): get feature bits names (meaning) Signed-off-by:
-
Michał Mirosław authored
This allows to enable GRO even if RX csum is disabled. GRO will not be used for packets without hardware checksum anyway. Signed-off-by:
-
Michał Mirosław authored
This is needed for unified offloads patch. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Vasanthy Kolluri authored
Signed-off-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
Danny Guo <dannguo@cisco.com> Signed-off-by:
Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by:
Roopa Prabhu <roprabhu@cisco.com> Signed-off-by:
David Wang <dwang2@cisco.com> Signed-off-by:
-
Vasanthy Kolluri authored
During a device reset, clear the counter for the no. of unicast addresses registered. Also, rename the routines that update unicast and multicast address lists. Signed-off-by:
-
Tom Herbert authored
Support fetching and retrieving RX indirection table via ethtool. Signed-off-by:
Tom Herbert <therbert@google.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
- 15 Feb, 2011 23 commits
-
-
-
-
Ben Hutchings authored
Implement the ndo_setup_tc() operation with 2 traffic classes. Current Solarstorm controllers do not implement TX queue priority, but they do allow queues to be 'paced' with an enforced delay between packets. Paced and unpaced queues are scheduled in round-robin within two separate hardware bins (paced queues with a large delay may be placed into a third bin temporarily, but we won't use that). If there are queues in both bins, the TX scheduler will alternate between them. If we make high-priority queues unpaced and best-effort queues paced, and high-priority queues are mostly empty, a single high-priority queue can then instantly take 50% of the packet rate regardless of how many of the best-effort queues have descriptors outstanding. We do not actually want an enforced delay between packets on best- effort queues, so we set the pace value to a reserved value that actually results in a delay of 0. Signed-off-by:Ben Hutchings <bhutchings@solarflare.com>
-
Ben Hutchings authored
efx_channel_get_{rx,tx}_queue() currently return NULL if the channel isn't used for traffic in that direction. In most cases this is a bug, but some callers rely on it as an existence test. Add existence test functions efx_channel_has_{rx_queue,tx_queues}() and use them as appropriate. Change efx_channel_get_{rx,tx}_queue() to assert that the requested queue exists. Remove now-redundant initialisation from efx_set_channels(). Signed-off-by: -
Ben Hutchings authored
efx_hard_start_xmit() needs to implement a mapping which is the inverse of tx_queue::core_txq. Move the initialisation of tx_queue::core_txq next to efx_hard_start_xmit() to make the connection more obvious. Signed-off-by: -
Ben Hutchings authored
If the root qdisc for a net device is mqprio, and the driver's ndo_setup_tc() operation dynamically adds and remvoes TX queues, netif_set_real_num_tx_queues() will be called during device unregistration to remove the extra TX queues when the qdisc is destroyed. Currently this causes the corresponding kobjects to be leaked, and the device's reference count never drops to 0. Signed-off-by: -
Uwe Kleine-König authored
Also optimize not to reread the value written to FEC_R_CNTRL. Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
Uwe Kleine-König authored
Reported-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
Uwe Kleine-König authored
This fixes warnings when CONFIG_DMA_API_DEBUG=y: NULL NULL: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000004781a020] [size=64 bytes] net eth0: DMA-API: device driver frees DMA memory with different size [device address=0x000000004781a020] [map size=2048 bytes] [unmap size=64 bytes] Moreover pass the platform device to dma_{,un}map_single which makes more sense because the logical network device doesn't know anything about dma. Passing the platform device was a suggestion by Lothar Waßmann. Signed-off-by: -
Uwe Kleine-König authored
Signed-off-by: -
Uwe Kleine-König authored
A few of these were found and reported by Lothar Waßmann. Signed-off-by: -
Uwe Kleine-König authored
A variable named "dev" usually (usually subjective) points to a struct device. Signed-off-by: -
Uwe Kleine-König authored
This undoes the effects of phy_start in fec_enet_open. Reported-by:
-
Uwe Kleine-König authored
Moreover stop listing all i.MX platforms featuring a FEC, and use the platform's config symbol that selects registration of a fec device instead. This might make it easier to add new platforms. Set default = y for ARMs having a fec to reduce defconfig sizes. Signed-off-by: -
Uwe Kleine-König authored
Saving it first into struct net_device->base_addr (which is an unsigned long) is pointless and only needs to use more casts than necessary. Reported-by:
-
Uwe Kleine-König authored
alloc_etherdev internally uses kzalloc, so the private data is already zerod out. Reported-by:
-
Uwe Kleine-König authored
dev_set_drvdata is called unconditionally in the probe function and so it cannot be NULL. Reported-by:
-
Uwe Kleine-König authored
Reported-by:
Lothar Waßmann <LW@KARO-elektronics.de> Signed-off-by:
-
Uwe Kleine-König authored
Reported-by:
-
Uwe Kleine-König authored
memcpy takes a const void * as 2nd argument. So the argument is converted automatically to void * anyhow. Signed-off-by: -
David S. Miller authored
Note that we do not generate the redirect netevent any longer, because we don't create a new cached route. Instead, once the new neighbour is bound to the cached route, we emit a neigh update event instead. Signed-off-by: -
David S. Miller authored
The general idea is that if we learn new PMTU information, we bump the peer genid. This triggers the dst_ops->check() code to validate and if necessary propagate the new PMTU value into the metrics. Learned PMTU information self-expires. This means that it is not necessary to kill a cached route entry just because the PMTU information is too old. As a consequence: 1) When the path appears unreachable (dst_ops->link_failure or dst_ops->negative_advice) we unwind the PMTU state if it is out of date, instead of killing the cached route. A redirected route will still be invalidated in these situations. 2) rt_check_expire(), rt_worker_func(), et al. are no longer necessary at all. Signed-off-by: -
Baruch Siach authored
Platform code can now set the MICREL_PHY_50MHZ_CLK bit of dev_flags in a fixup routine (registered with phy_register_fixup_for_uid()), to make the KZS8051RNL PHY work with 50MHz RMII reference clock. Cc: David J. Choi <david.choi@micrel.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
- 14 Feb, 2011 8 commits
-
-
Bernard Pidoux authored
With previous patch, rose_get_neigh() routine investigates the full list of neighbor nodes until it finds or not an already connected node whether it is called locally or through a level 3 transit frame. If no routes are opened through an adjacent connected node then a classical connect request is attempted. Then there is no more reason for an extra loop such as the one removed by this patch. Signed-off-by:
Bernard Pidoux <f6bvp@free.fr> Signed-off-by:
-
Bernard Pidoux authored
FPAC AX25 packet application is using Linux kernel ROSE routing skills in order to connect or send packets to remote stations knowing their ROSE address via a network of interconnected nodes. Each FPAC node has a ROSE routing table that Linux ROSE module is looking at each time a ROSE frame is relayed by the node or when a connect request to a neighbor node is received. A previous patch improved the system time response by looking at already established routes each time the system was looking for a route to relay a frame. If a neighbor node routing the destination address was already connected, then the frame would be sent through him. If not, a connection request would be issued. The present patch extends the same routing capability to a connect request asked by a user locally connected into an FPAC node. Without this patch, a connect request was not well handled unless it was directed to an immediate connected neighbor of the local node. Implemented at a number of ROSE FPAC node stations, the present patch improved dramatically FPAC ROSE routing time response and efficiency. Signed-off-by:
-
Eric Dumazet authored
Commit 0c838ff1 (ipv4: Consolidate all default route selection implementations.) forgot to remove one rcu_read_unlock() from fib_select_default(). Signed-off-by:
-
Ben Hutchings authored
All the cleanup code in mqprio_destroy() is currently conditional on priv->qdiscs being non-null, but that condition should only apply to the per-queue qdisc cleanup. We should always set the number of traffic classes back to 0 here. Signed-off-by: -
Bhupesh Sharma authored
Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by:
-
Guo-Fu Tseng authored
Signed-off-by:
Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by:
-
Guo-Fu Tseng authored
Some JMicron Chip treat 0 as error checksum for UDP packets. Which should be "No checksum needed". Reported-by:
Adam Swift <Adam.Swift@omnitude.net> Confirmed-by:
"Aries Lee" <arieslee@jmicron.com> Signed-off-by:
-
Guo-Fu Tseng authored
The value of the register which holds receive Unicast MAC Address sometimes get messed-up after resume. This patch refill it before enabling the hardware filter. Signed-off-by:
-
