- 26 Dec, 2015 26 commits
-
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: John Crispin <blogic@openwrt.org> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This also makes the driver start to return the error code, as the end of the series make this work. Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This also starts to propagate the error code from the I2C transaction as the end of the series adds support for that. Cc: Wei Chen <Wei.Chen@csr.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Krueger <daniel.krueger@systec-electronic.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Also start returning the error code if something fails, as the end of the series augment the core to support this. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: George Cherian <george.cherian@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Feng Tang <feng.tang@intel.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Also start to propagate the error code here as the end of the series fixes this to work for all drivers. Cc: Semen Protsenko <semen.protsenko@globallogic.com> Reviewed-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Roland Stigge <stigge@antcom.de> Cc: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Brunner Michael <Michael.Brunner@kontron.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: -
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Magnus Damm <damm@opensource.se> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by:
-
- 22 Dec, 2015 4 commits
-
-
Peter Rosin authored
Signed-off-by:
Peter Rosin <peda@axentia.se> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
William Breathitt Gray authored
Performing a read operation on the IRQ Status register will clear the IRQ latch. Since a read operation on the IRQ Status register must be performed in the IRQ handler in order to determine if the IRQ was in fact generated by the device, the IRQ latch is consequently cleared by the IRQ handler. A spinlock is used to guarantee that each IRQ is serviced in the order it was received. Signed-off-by:William Breathitt Gray <vilhelm.gray@gmail.com>
-
Robert Jarzmik authored
Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Robert Jarzmik authored
The commit "gpio: pxa: change the interrupt management" should have taken care of moving an ifdef to not englobe irqdomain related structures anymore, as they are used now for all builds. This repairs the broken builds where CONFIG_OF=n. Signed-off-by:
-
- 21 Dec, 2015 3 commits
-
-
Linus Walleij authored
This removes the set_irq_flags() call that unfortunately slipped into the BCM NSP driver. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yendapally Reddy Dhananjaya Reddy <yrdreddy@broadcom.com> Signed-off-by:
-
Linus Walleij authored
Linux 4.4-rc6
-
Linus Torvalds authored
-
- 20 Dec, 2015 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Late fixes for the RTC subsystem for 4.4: A fix for a nasty hardware bug in rk808 and an initialization reordering in da9063 to fix a possible crash" * tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: fix access ordering error during RTC interrupt at system power on rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
-
Steve Twiss authored
This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by:Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Julius Werner authored
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by:
Julius Werner <jwerner@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some reported problems. All of these have been in linux-next. The details are in the shortlog" * tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix GPF in flush_to_ldisc() serial: earlycon: Add missing spinlock initialization serial: sh-sci: Fix length of scatterlist n_tty: Fix poll() after buffer-limited eof push read serial: 8250_uniphier: fix dl_read and dl_write functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some reported problems. Full details in the shortlog" * tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: fix invalid memory access in hub_activate() USB: ipaq.c: fix a timeout loop phy: core: Get a refcount to phy in devm_of_phy_get_by_index() phy: cygnus: pcie: add missing of_node_put phy: miphy365x: add missing of_node_put phy: miphy28lp: add missing of_node_put phy: rockchip-usb: add missing of_node_put phy: berlin-sata: add missing of_node_put phy: mt65xx-usb3: add missing of_node_put phy: brcmstb-sata: add missing of_node_put phy: sun9i-usb: add USB dependency
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Four fixes for md: - two recently introduced regressions fixed. - one older bug in RAID10 - tagged for -stable since 4.2 - one minor sysfs api improvement" * tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md: Fix remove_and_add_spares removes drive added as spare in slot_store md: fix bug due to nested suspend MD: change journal disk role to disk 0 md/raid10: fix data corruption and crash during resync
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Partial revert of "powerpc: Individual System V IPC system calls" - pr_warn_once on unsupported OPAL_MSG type from Stewart - Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type Partial revert of "powerpc: Individual System V IPC system calls"
-
