- 18 Apr, 2013 35 commits
-
-
Daniel Vetter authored
The recent rework of the pfit handling didn't take into account that the panel fitter is fixed to pipe B: commit 24a1f16d Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Fri Feb 8 16:35:37 2013 +0200 drm/i915: disable shared panel fitter for pipe Fix this up by properly computing the pipe the pfit is on. Also extract the logic into its own function, add a debug assert to check that the pipe is off (mostly just documentation) and add some debug output. If pipe A was disabled after pipe B was set up, the panel fitter will be disabled. Now most userspace doesn't do modesets in this order, which is why I couldn't ever reproduce this and why it took me so long to figure out. We really need hw state readout and check support for the pannel fitter ... Reported-by:
Hans de Bruin <jmdebruin@xmsnet.nl> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Hans de Bruin <jmdebruin@xmsnet.nl> References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/19049Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Yet again our current confusion between doing the modeset globally, but only having the new parameters for one crtc at a time. So that intel_set_mode essentially already does a global modeset: intel_modeset_affected_pipes compares the current state with where we want to go to (which is carefully set up by intel_crtc_set_config) and then goes through the modeset sequence for any crtc which needs updating. Now the issue is that the actual interface with the remaining code still only works on one crtc, and so we only pass in one fb and one mode. In intel_set_mode we also only compute one intel_crtc_config (which should be the one for the crtc we're doing a modeset on). The reason for that mismatch is twofold: - We want to eventually do all modeset as global state changes, so it's just infrastructure prep. - But even the old semantics can change more than one crtc when you e.g. move a connector from crtc A to crtc B, then both crtc A and B need to be updated. Usually that means one pipe is disabled and the other enabled. This is also the reason why the hack doesn't touch the disable_pipes mask. Now hilarity ensued in our kms config restore paths when we actually try to do a modeset on all crtcs: If the first crtc should be off and the second should be on, then the call on the first crtc will notice that the 2nd one should be switched on and so tries to compute the pipe_config. But due to a lack of passed-in fb (crtc 1 should be off after all) it only results in tears. This case is ridiculously easy to hit on gen2/3 where the lvds output is restricted to pipe B. Note that before the pipe_config bpp rework gen2/3 didn't care really about the fb->depth, so this is a regression brought to light with commit 4e53c2e0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 27 00:44:58 2013 +0100 drm/i915: precompute pipe bpp before touching the hw But apparently Ajax also managed to blow up pch platforms, probably with some randomized configs, and pch platforms trip up over the lack of an fb even in the old code. So this actually goes back to the first introduction of the new modeset restore code in commit 45e2b5f6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Nov 23 18:16:34 2012 +0100 drm/i915: force restore on lid open Fix this mess by now by justing shunting all the cool new global modeset logic in intel_modeset_affected_pipes. v2: Improve commit message and clean up all the comments in intel_modeset_affected_pipes - since the introduction of the modeset restore code they've been a bit outdated. Bugzill: https://bugzilla.redhat.com/show_bug.cgi?id=917725 Cc: stable@vger.kernel.org References: http://www.mail-archive.com/stable@vger.kernel.org/msg38084.htmlTested-by:
Richard Cochran <richardcochran@gmail.com> Reviewed-by:
-
Jani Nikula authored
Backlight cleanup in the eDP connector destroy callback caused the backlight device to be removed on some systems that first initialized LVDS and then attempted to initialize eDP. Prevent multiple backlight initializations, and ensure backlight cleanup is only done once by moving it to modeset cleanup. A small wrinkle is the introduced asymmetry in backlight setup/cleanup. This could be solved by adding refcounting, but it seems overkill considering that there should only ever be one backlight device. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55701Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Peter Verthez <peter.verthez@skynet.be> Cc: stable@vger.kernel.org Signed-off-by:
-
Paulo Zanoni authored
This solves some "unclaimed register" messages when booting the machine with eDP attached. V2: Rebase and add the comment requested by Daniel. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Paulo Zanoni authored
It returns true if we've requested to turn the power well on and it's really on. It also returns true for all the previous gens. For now there's just one caller, but I'm going to add more. Signed-off-by:
-
Daniel Vetter authored
It will be only consistent once we've restored all the crtcs. Since a bunch of other callers also want to just restore a single crtc, add a boolean to disable checking only where it doesn't make sense. Note that intel_modeset_setup_hw_state already has a call to intel_modeset_check_state at the end, so we don't reduce the amount of checking. v2: Try harder not to create a big patch (Chris). v3: Even smaller (still Chris). Also fix a trailing space. References: https://lkml.org/lkml/2013/3/16/60 Cc: Tomas Melin <tomas.melin@iki.fi> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by:
Tomas Melin <tomas.melin@iki.fi> Tested-by:
-
Ville Syrjälä authored
Increase the number of fence registers to 32 on IVB/HSW. VLV however only has 16 fence registers according to the docs. Increasing the number of fences was attempted before [1], but there was some uncertainty about the maximum CPU fence number for FBC. Since then BSpec has been updated to state that there are in fact 32 fence registers, and the CPU fence number field in the SNB_DPFC_CTL_SA register is 5 bits, and the CPU fence number field in the ILK_DPFC_CONTROL register must be zero. So now it all makes sense. [1] http://lists.freedesktop.org/archives/intel-gfx/2011-October/012865.html v2: Include some background information based on the previous attempt Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
commit 4f9b2fe0441d4bdf5666a306156b5d6755de2584 Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri Apr 5 14:29:22 2013 -0700 drm/i915: Better overclock support changed the sysfs read semantics for 'gt_max_freq_mhz'. By always returning overclock max instead of stored value. Fix this by returning the stored value. Separate sysfs entry should be considered for overclocking max freq. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63415 Cc: Ben Widawsky <ben@bwidawsk.net> Signed-off-by:Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Ben Widawsky authored
Looks like a some remnant from a rebase. Signed-off-by:
-
Ville Syrjälä authored
BSpec contains several scattered notes which state that the maximum fence stride was increased to 256KB on IVB. Testing on real hardware agrees. Signed-off-by:
-
Ville Syrjälä authored
Our checks for an invalid fence stride forgot to guard against zero stride on gen4+. Fix it. v2: Avoid duplicated code (danvet) Signed-off-by:
-
Ville Syrjälä authored
IVB and HSW use different encodings for the PPGTT cacheability bits in the GAM_ECOCHK register. Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
According to BSpec GAC_ECO_BITS register exists on Gen7 platforms as well. Configure it accordingly. Signed-off-by:
-
Ville Syrjälä authored
GAC_ECO_BITS has a bit similar to GAM_ECOCHK's ECOCHK_SNB_BIT. Add the define, and enable it on SNB. Signed-off-by:
-
Ben Widawsky authored
Requested-by:
-
Ben Widawsky authored
Most importantly this will allow users to set overclock frequencies in sysfs. Previously the max was limited by the RP0 max as opposed to the overclock max. This is useful if one wants to either limit the max overclock frequency, or set the minimum frequency to be in the overclock range. It also fixes an issue where if one sets the max frequency to be below the overclock max, they wouldn't be able to set back the proper overclock max. In addition I've added a couple of other bits: Show the overclock freq. as max in sysfs Print the overclock max in debugfs. Print a warning if the user sets the min frequency to be in the overclock range. In this patch I've decided to store the hw_max when we read it from the pcode at init. The reason I do this is the pcode reads can fail, and are slow. v2: Report when user requested overclocked max (Daniel) Remove when user sets min to overclock range (Daniel) Reported-by: freezer from #intel-gfx on irc Signed-off-by:
-
Jani Nikula authored
Workaround to avoid intermittent aux channel failures, per spec change. v2: Don't mess with cpu dp aux divider (Paulo Zanoni) Signed-off-by:
-
Ben Widawsky authored
I'm really not happy that we have to support this, but this will be the simplest way to handle cases where PPGTT init can fail, which I promise will be coming in the future. v2: Resolve conflicts due to patch series reordering. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: -
Ben Widawsky authored
This will allow us to carry on if we've cleaned up the PPGTT. The usage for this is coming up - it simplifies handling a failed PPGTT init. Signed-off-by:
-
Ben Widawsky authored
Since we've already set up a nice vtable to abstract other PPGTT functions, also abstract the actual register programming to enable things. This function will probably need to change a bit as we implement real processes. v2: Resolve conflicts due to patch series reordering. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: -
Ben Widawsky authored
This rework will help if future platforms choose to be a bit different. Should have no functional impact. v2: Don't move around the vtable setup (Daniel) v3: Squash in the disable-by-default patch. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: -
Ben Widawsky authored
It only works that way on GEN6 and GEN7. Let's not assume GENn will be the same. Signed-off-by:
-
Ben Widawsky authored
The PPGTT scratch page is used for all gens, and doing it in the global part of our PPGTT setup makes the code a bit nicer. This was in a patch submitted earlier as part of the PPGTT cleanups. Grumpy maintainer must have missed it, and I didn't yell when appropriate. Apologies for everyone :-) v2: Update commit message Signed-off-by:
-
Ben Widawsky authored
There used to be other fixes in this patch but they've slowly disappeared as other parts have been fixed. Signed-off-by:
-
Ben Widawsky authored
This will allow us to read/write registers in GTT init. Signed-off-by:
-
Ben Widawsky authored
We can assume that the PTE layout, and size changes for future generations. To avoid confusion with the existing GEN6 PTE typedef, give it a GEN6_ prefix. v2: Fixup checkpatch warning and bikeshed commit message slightly. v3: Rebase on top of Imre's for_each_sg_pages rework. v4: Fixup conflicts in patch series reordering. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: -
Ben Widawsky authored
All gen6+ parts so far have 1 BAR which holds both the register space and the GTT PTEs. Up until now, that was a 4MB BAR with half allocated to each. I have a strong hunch (wink, nod, wink) that future gens will also keep a similar 50-50 split though the sizes may change. To help this along change the code to obey the rule of half the total size instead of a hard-coded 2MB. Signed-off-by:
-
Chris Wilson authored
Enabling context support increases SwapBuffers latency by about 20% (measured on an i7-3720qm). We can offset that loss slightly by enabling faster caching for the contexts. As they are not backed by any particular cache (such as the sampler or render caches) our only option is to select the generic mid-level cache. This reduces the latency of the swap by about 5%. Oddly this effect can be observed running smokin-guns on IVB at 1280x1024: Using BLT copies for swaps: 151.67 fps Using Render copies for swaps (unpatched): 141.70 fps With contexts disabled: 150.23 fps With contexts in L3$: 150.77 fps Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Daniel Vetter authored
Bspec has been been updated and dropped these two changes for non-sdv LPT PCHs. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Chris Wilson authored
In order to fully serialize access to the fenced region and the update to the fence register we need to take extreme measures on SNB+, and manually flush writes to memory prior to writing the fence register in conjunction with the memory barriers placed around the register write. Fixes i-g-t/gem_fence_thrash v2: Bring a bigger gun v3: Switch the bigger gun for heavier bullets (Arjan van de Ven) v4: Remove changes for working generations. v5: Reduce to a per-cpu wbinvd() call prior to updating the fences. v6: Rewrite comments to ellide forgotten history. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Daniel Vetter authored
Userspace can easily hit this and does since Ville added a new evil igt testcase in: commit 069e35e0fc3785faa562adcfd2dd7bbed4cb1dea Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Mar 4 15:34:06 2013 +0200 kms_flip: Add flip-vs-bad-tiling test v2: Fix the spelling in the added comment (Chris). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63246Signed-off-by: -
Daniel Vetter authored
Since the ratio is different, we also need to pass in the parameters for the reduced clock. Might or might not reduce flicker for the auto-downclocking on lvds/eDP. Reviewed-by:
-
Daniel Vetter authored
Only on IBX should we set the limiting factor to 25 unconditionally for dual-channel mode, on CPT/PPT 25 only applies when the lvds refclock is 100MHz. Reviewed-by:
-
Daniel Vetter authored
commit de13a2e3 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Thu Sep 20 18:36:05 2012 -0300 drm/i915: extract compute_dpll from ironlake_crtc_mode_set missed the subtle adjustment of the FP1 register. Fix this up by passing a pointer around instead of the value. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
-
Egbert Eich authored
The connector associated with the encoder is considered active when the output associtated with this connector is active on the encoder. The encoder itself is considered active when either there is an active output on it or the respective SDVO channel is active. Having active outputs when the SDVO channel is inactive seems to be inconsistent: such states can be found when intel_modeset_setup_hw_state() collects the hardware state set by the BIOS. This inconsistency will be fixed in intel_sanitize_crtc() (when intel_crtc_update_dpms() is called), this however only happens when the encoder is associated with a crtc. This patch also reverts: commit bd6946e8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 2 21:30:34 2013 +0200 drm/i915: Fix sdvo connector get_hw_state function Signed-off-by:Egbert Eich <eich@suse.de> Suggested-by:
-
- 08 Apr, 2013 4 commits
-
-
Ben Widawsky authored
FIXME: This is based on some HW being used for a demo. We should probably wait until we have confirmation on the IDs before upstreaming this patch. v2: Use GEN7_FEATURES (Chris) Signed-off-by:
-
Ben Widawsky authored
Set up PCH_NOP when we match a certain platform. v2: Just do a num_pipes check + comment instead of trying to check the platform (Daniel) Signed-off-by:
-
Ben Widawsky authored
BIOS should be setting this, but in case it doesn't... v2: Define the bits we actually want to clear (Jesse) Make it an RMW op (Jesse) Signed-off-by:
-
Ben Widawsky authored
Interrupts, clock gating, LVDS, and GMBUS are all within the, "this will be bad for CPU" range when we have PCH_NOP. There is a bit of a hack in init clock gating. We want to do most of the clock gating, but the part we skip will hang the system. It could probably be abstracted a bit better, but I don't feel it's too unsightly. v2: Use inverse HAS_PCH_NOP check (Jani) v3: Actually do what I claimed in v2 (spotted by Daniel) Merge Ivybridge IRQ handler PCH check to decrease whitespace (Daniel) Move LVDS bail into this patch (Ben) v4: logical rebase conflict resolution with SDEIIR (Ben) Signed-off-by:
-
- 06 Apr, 2013 1 commit
-
-
Ben Widawsky authored
Given certain fusing options discussed in the previous patch, it's possible to end up with platforms that normally have PCH but that PCH doesn't actually exist. In many cases, this is easily remedied with setting 0 pipes. This covers the other corners. Requiring this is a symptom of improper code splitting (using HAS_PCH_SPLIT instead of proper GEN checking, basically). I do not want to fix this. v2: Remove PCH reflck after change in previous patch (Daniel) Signed-off-by:
-
