- 23 Sep, 2009 40 commits
-
-
Alessandro Zummo authored
Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
dmitry pervushin authored
Add support for RTC on the Freescale STMP37xx/378x platform. Signed-off-by:
dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by:
-
Michael Hennerich authored
The Blackfin RTC IRQ is an internal interrupt, so it makes no sense to have it be shared. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Linus Walleij authored
This adds a driver for the RTC COH 901 331 found in the ST-Ericsson U300 series mobile platforms to the RTC subsystem. It integrates to the ARM kernel support recently added to RMKs ARM tree and will be enabled in the U300 defconfig in due time. Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
-
Daniel Mack authored
This adds a driver for Freescale's MXC internal real time clock modules. The code is taken from Freescale's BSPs, but modified to fit the current kernel coding mechanisms. Also, the PMIC external clock function was removed for now to not add dead bits and keep the code as simple as possible. [akpm@linux-foundation.org: make PIE_BIT_DEF[] static] Signed-off-by:
Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Chris Verges authored
Signed-off: Chris Verges <chrisv@cyberswitching.com> Cc: Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Chris Verges authored
Add support for the Philips/NXP PCF2123 RTC. Signed-off: Chris Verges <chrisv@cyberswitching.com> Tested-by:
Chris Verges <chrisv@cyberswitching.com> Signed-off: Christian Pellegrin <chripell@fsfe.org> Tested-by:
Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
David Brownell authored
Support two new half-duplex SPI implementation restrictions, for links that talk to TX-only or RX-only devices. (Existing half-duplex flavors support both transfer directions, just not at the same time.) Move spi_async() into the spi.c core, and stop inlining it. Then make that function perform error checks and reject messages that demand more than the underlying controller can support. Based on a patch from Marek Szyprowski which did this only for the bitbanged GPIO driver. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Syed Rafiuddin authored
tAdd adds McSPI support for OMAP4430 SDP platform. All the base addresses are changed between OMAP1/2/3 and OMAP4. The fields of the resource structures are filled at runtime to have McSPI support on OMAP4. Signed-off-by:
Syed Rafiuddin <rafiuddin.syed@ti.com> Acked-by:
Kevin Hilman <khilman@deeprootsystems.com> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Tero Kristo authored
Previous restore was lazy and only restored CHxCONF when it was needed by a specific chip select. This could cause occasional errors on an SPI bus where multiple chip selects are in use. Signed-off-by:
Tero Kristo <tero.kristo@nokia.com> Signed-off-by:
-
Hemanth V authored
Add context save/restore feature to McSPI driver. Signed-off-by:
Hemanth V <hemanthv@ti.com> Reviewed-by:
Aaro Koskinen <Aaro.Koskinen@nokia.com> Signed-off-by:
-
dmitry pervushin authored
Add SPI driver for Freescale STMP 3xxx-based boards [dbrownell@users.sourceforge.net: cleanup sequence, spi_unregister_master] Signed-off-by:
-
Ben Dooks authored
With the update to the spi_bitbang driver, the transfer setup code is being called more often, and thus is often re-doing calculations that have been done before. The SPI layer allows our driver to add its own data to each device so add a result cache to each device. This should also remove the problem where we where directly setting up registers in the setup call which meant we might overwrite the state of an extant transfer., Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Ben Dooks authored
Change the spi_s3c24xx driver to use dev_pm_ops to avoid the following warning during probe: Platform driver 's3c2410-spi' needs updating - please use dev_pm_ops Signed-off-by:
-
Ben Dooks authored
Change the use of (res->end - res->start) to use resource_size() to get the size of the resource. Signed-off-by; Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Ben Dooks authored
The driver includes <asm/io.h> where it should be including <linux/io.h> and also includes <mach/hardware.h> and <asm/dma.h> without using anything from these. Signed-off-by:
-
Ben Dooks authored
Fix spelling of `automatically' in Documentation/spi/spi-summary. Signed-off-by:
-
Antonio Ospite authored
Register pxa2xx_spi earlier so it can be used with cpufreq Signed-off-by:
Daniel Ribeiro <drwyrm@gmail.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
-
Anton Vorontsov authored
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
Anton Vorontsov authored
Make the code a little bit nicer, and shorter. Signed-off-by:
-
Anton Vorontsov authored
Make the code a little bit nicer, and shorter. Signed-off-by:
Marc Pignat <marc.pignat@hevs.ch> Signed-off-by:
-
Anton Vorontsov authored
The alias isn't needed any longer since the m25p80 driver converted to the module device table matching. Signed-off-by:
-
Anton Vorontsov authored
With this patch spi drivers can use standard spi_driver.id_table and MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just like we do with I2C drivers. This is useful when a single driver supports several variants of devices but it is not possible to detect them in run-time (like non-JEDEC chips probing in drivers/mtd/devices/m25p80.c), and when platform_data usage is overkill. This patch also makes life a lot easier on OpenFirmware platforms, since with OF we extensively use proper device IDs in modaliases. Signed-off-by:
-
Sascha Hauer authored
This driver has been tested on i.MX1/i.MX27/i.MX35 with an AT25 type EEPROM and on i.MX27/i.MX31 with a Freescale MC13783 PMIC. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
David Brownell <david-b@pacbell.net> Cc: Andrea Paterniani <a.paterniani@swapp-eng.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
linus.walleij@stericsson.com authored
This makes the PL022 driver a default choice for any RealView and Versatile boards plus the integrator IMPD1 which all contain the PL022 PrimeCell. This will make it a default choice if and only if a user selects SPI support for their board. Signed-off-by:
-
Randy Dunlap authored
Add missing kernel-doc notation in spi.h for struct spi_master: Warning(include/linux/spi/spi.h:289): No description found for parameter 'mode_bits' Warning(include/linux/spi/spi.h:289): No description found for parameter 'flags' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Steven A. Falco authored
This adds a SPI driver for the SPI controller found in the IBM/AMCC 4xx PowerPC's. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Wolfgang Ocker <weo@reccoware.de> Acked-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
Steven A. Falco <sfalco@harris.com> Signed-off-by:
-
Jouni Hogander authored
Convert bit shifted values into BIT format Signed-off-by:
Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by:
-
Sascha Hauer authored
This driver is in a non working state at the moment and will be replaced by a bitbang driver which can also handle the newer i.MX variants Signed-off-by:
Andrea Paterniani <a.paterniani@swapp-eng.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
We want to check for s_inode's existence, not inode's one (inode is always valid in this function). This takes care of the following entry from Dan's list: fs/ncpfs/ioctl.c +445 __ncp_ioctl(180) warning: variable derefenced before check 'inode' Reported-by:
Dan Carpenter <error27@gmail.com> Cc: Julia Lawall <julia@diku.dk> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Noticed-by:
Joe Perches <joe@perches.com> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by:
-
Roel Kluin authored
This function uses signed integers for the unix_date and local variables - if a negative number is supplied and the leap-year condition is not met, month will be 0, leading to a later read of day_n[-1] Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by:
-
maximilian attems authored
initramfs userspace likes to use this magic number. Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
maximilian attems <max@stro.at> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
After memory hotplug (or other events in future), kcore size can be modified. To update inode->i_size, we have to know inode/dentry but we can't get it from inside /proc directly. But considerinyg memory hotplug, kcore image is updated only when it's opened. Then, updating inode->i_size at open() is enough. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Presently the size of /proc/kcore which can be read by 'ls -l' is 0. But it's not the correct value. On x86-64, ls -l shows ... root root 140737486266368 2009-09-17 10:29 /proc/kcore Then, 7FFFFFFE02000. This comes from vmalloc area's size. (*) This shows "core" size, not memory size. This patch shows the size by updating "size" field in struct proc_dir_entry. Later, lookup routine will create inode and fill inode->i_size based on this value. Then, this has a problem. - Once inode is cached, inode->i_size will never be updated. Then, this patch is not memory-hotplug-aware. To update inode->i_size, we have to know dentry or inode. But there is no way to lookup them by inside kernel. Hmmm.... Next patch will try it. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
proc_kcore_init() doesn't check NULL case. fix it and remove unnecessary comments. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Some archs define MODULED_VADDR/MODULES_END which is not in VMALLOC area. This is handled only in x86-64. This patch make it more generic. And we can use vread/vwrite to access the area. Fix it. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Benjamin Herrenschmidt <benh@kernel.crashing.org> pointed out that vmemmap range is not included in KCORE_RAM, KCORE_VMALLOC .... This adds KCORE_VMEMMAP if SPARSEMEM_VMEMMAP is used. By this, vmemmap can be readable via /proc/kcore Because it's not vmalloc area, vread/vwrite cannot be used. But the range is static against the memory layout, this patch handles vmemmap area by the same scheme with physical memory. This patch assumes SPARSEMEM_VMEMMAP range is not in VMALLOC range. It's correct now. [akpm@linux-foundation.org: fix typo] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
For /proc/kcore, each arch registers its memory range by kclist_add(). In usual, - range of physical memory - range of vmalloc area - text, etc... are registered but "range of physical memory" has some troubles. It doesn't updated at memory hotplug and it tend to include unnecessary memory holes. Now, /proc/iomem (kernel/resource.c) includes required physical memory range information and it's properly updated at memory hotplug. Then, it's good to avoid using its own code(duplicating information) and to rebuild kclist for physical memory based on /proc/iomem. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
