- 15 Dec, 2011 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8712u: Add new USB ID staging: tidspbridge: request dmtimer clocks on init staging: tidspbridge: include module.h by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: option: Removing one bogus and adding some new Huawei combinations USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. usb: option: Add Huawei E398 controlling interfaces usb: renesas_usbhs: add hcd->has_tt for low/full speed usb: renesas_usbhs: typofix: irq_dtch control DTCHE usb: gadget: storage: release superspeed descriptors.
-
Uwe Kleine-König authored
The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979 ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/swiotlb: Use page alignment for early buffer allocation. xen: only limit memory map to maximum reservation for domain 0.
-
Konrad Rzeszutek Wilk authored
This fixes an odd bug found on a Dell PowerEdge 1850/0RC130 (BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask would fail with: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: can't derive routing for PCI INT A ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO The issue was the Xen-SWIOTLB was allocated such as that the end of buffer was stradling a page (and also above 4GB). The fix was spotted by Kalev Leonid which was to piggyback on git commit e79f86b2 "swiotlb: Use page alignment for early buffer allocation" which: We could call free_bootmem_late() if swiotlb is not used, and it will shrink to page alignment. So alloc them with page alignment at first, to avoid lose two pages And doing that fixes the outstanding issue. CC: stable@kernel.org Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com> Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Ian Campbell authored
d312ae87 "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set <domain> 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: stable@kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: add some new pci ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* tag 'tytso-for-linus-20111214' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: handle EOF correctly in ext4_bio_write_page() ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers() ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize ext4: avoid hangs in ext4_da_should_update_i_disksize() ext4: display the correct mount option in /proc/mounts for [no]init_itable ext4: Fix crash due to getting bogus eh_depth value on big-endian systems ext4: fix ext4_end_io_dio() racing against fsync() .. using the new signed tag merge of git that now verifies the gpg signature automatically. Yay. The branchname was just 'dev', which is prettier. I'll tell Ted to use nicer tag names for future cases.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: llseek fix race fuse: fix llseek bug fuse: fix fuse_retrieve
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/ncpfs: fix error paths and goto statements in ncp_fill_super() configfs: register_filesystem() called too early fuse: register_filesystem() called too early ubifs: too early register_filesystem() ... and the same kind of leak for mqueue procfs: fix a vfsmount longterm reference leak
-
- 14 Dec, 2011 10 commits
-
-
Alex Deucher authored
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43739Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Djalal Harouni authored
The label 'out_bdi' should be followed by bdi_destroy() instead of fput() which should be after the 'out_fput' label. If bdi_setup_and_register() fails then jump to the 'out_fput' label instead of the 'out_bdi' one. If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi' label to call bdi_destroy() otherwise the bdi object will not be destroyed. Compile tested only. Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Yongqiang Yang authored
We need to zero out part of a page which beyond EOF before setting uptodate, otherwise, mapread or write will see non-zero data beyond EOF. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
Yongqiang Yang authored
If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater than ee_block + ee_len. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
Yongqiang Yang authored
If a page has been read into memory and never been written, it has no buffers, but we should handle the page in truncate or punch hole. VFS code of writing operations has handled holes correctly, so this patch removes the code handling holes in writing operations. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
Yongqiang Yang authored
If there is an unwritten but clean buffer in a page and there is a dirty buffer after the buffer, then mpage_submit_io does not write the dirty buffer out. As a result, da_writepages loops forever. This patch fixes the problem by checking dirty flag. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
Andrea Arcangeli authored
If the pte mapping in generic_perform_write() is unmapped between iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the "copied" parameter to ->end_write can be zero. ext4 couldn't cope with it with delayed allocations enabled. This skips the i_disksize enlargement logic if copied is zero and no new data was appeneded to the inode. gdb> bt #0 0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\ 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467 #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 #2 0xffffffff810d97f1 in generic_perform_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value o\ ptimized out>, pos=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2440 #3 generic_file_buffered_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value optimized out>, p\ os=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2482 #4 0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\ xffff88001e26be40) at mm/filemap.c:2600 #5 0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=<value optimi\ zed out>, pos=<value optimized out>) at mm/filemap.c:2632 #6 0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\ t fs/ext4/file.c:136 #7 0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=<value optimized out>, len=<value optimized out>, \ ppos=0xffff88001e26bf48) at fs/read_write.c:406 #8 0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x4\ 000, pos=0xffff88001e26bf48) at fs/read_write.c:435 #9 0xffffffff8113816c in sys_write (fd=<value optimized out>, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x\ 4000) at fs/read_write.c:487 #10 <signal handler called> #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ () #12 0x0000000000000000 in ?? () gdb> print offset $22 = 0xffffffffffffffff gdb> print idx $23 = 0xffffffff gdb> print inode->i_blkbits $24 = 0xc gdb> up #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 2512 if (ext4_da_should_update_i_disksize(page, end)) { gdb> print start $25 = 0x0 gdb> print end $26 = 0xffffffffffffffff gdb> print pos $27 = 0x108000 gdb> print new_i_size $28 = 0x108000 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize $29 = 0xd9000 gdb> down 2467 for (i = 0; i < idx; i++) gdb> print i $30 = 0xd44acbee This is 100% reproducible with some autonuma development code tuned in a very aggressive manner (not normal way even for knumad) which does "exotic" changes to the ptes. It wouldn't normally trigger but I don't see why it can't happen normally if the page is added to swap cache in between the two faults leading to "copied" being zero (which then hangs in ext4). So it should be fixed. Especially possible with lumpy reclaim (albeit disabled if compaction is enabled) as that would ignore the young bits in the ptes. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
Larry Finger authored
Add USB ID for Sitecom WLA-2000 v1.001 WLAN. Reported-and-tested-by: Roland Gruber <post@rolandgruber.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Omar Ramirez Luna authored
Given that dm timer framework doesn't support request of clocks by soft | hard irqs because some recent changes, tidspbridge needs to request its clocks on init and enable/disable them on demand. This was first seen on 3.2-rc1. Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Omar Ramirez Luna authored
Fixes compilation break when compiled as part of the kernel: drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe': drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function) drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.) Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 13 Dec, 2011 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: add missing spin_unlock at ceph_mdsc_build_path() ceph: fix SEEK_CUR, SEEK_SET regression crush: fix mapping calculation when force argument doesn't exist ceph: use i_ceph_lock instead of i_lock rbd: remove buggy rollback functionality rbd: return an error when an invalid header is read ceph: fix rasize reporting by ceph_show_options
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds authored
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: set max_pause to lowest value on zero bdi_dirty writeback: permit through good bdi even when global dirty exceeded writeback: comment on the bdi dirty threshold fs: Make write(2) interruptible by a fatal signal writeback: Fix issue on make htmldocs
-
Yehuda Sadeh authored
one of the paths was missing spin_unlock Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
-
Bjørn Mork authored
Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
same story as with ubifs Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
doing that before you are ready to handle mount() is a Bad Idea(tm)... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-armLinus Torvalds authored
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs ARM: 7187/1: fix unwinding for XIP kernels ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU
-
Sage Weil authored
Commit 06222e49 got the if wrong so that it always evaluates as true. This is semantically harmless, but makes SEEK_CUR and SEEK_SET needlessly query the server. Rewrite the if to explicitly enumerate the cases we DO need a valid i_size to make this code less fragile. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
-
Miklos Szeredi authored
Fix race between lseek(fd, 0, SEEK_CUR) and read/write. This was fixed in generic code by commit 5b6f1eb9 (vfs: lseek(fd, 0, SEEK_CUR) race condition). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
-
Roel Kluin authored
The test in fuse_file_llseek() "not SEEK_CUR or not SEEK_SET" always evaluates to true. This was introduced in 3.1 by commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek) and changed the behavior of SEEK_CUR and SEEK_SET to always retrieve the file attributes. This is a performance regression. Fix the test so that it makes sense. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org CC: Josef Bacik <josef@redhat.com> CC: Al Viro <viro@zeniv.linux.org.uk>
-
Miklos Szeredi authored
Fix two bugs in fuse_retrieve(): - retrieving more than one page would yield repeated instances of the first page - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the request page array would overflow fuse_retrieve() was added in 2.6.36 and these bugs had been there since the beginning. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org
-
Linus Torvalds authored
Exactly like roundup_pow_of_two(1), the rounddown version was buggy for the case of a compile-time constant '1' argument. Probably because it originated from the same code, sharing history with the roundup version from before the bugfix (for that one, see commit 1a06a52e: "Fix roundup_pow_of_two(1)"). However, unlike the roundup version, the fix for rounddown is to just remove the broken special case entirely. It's simply not needed - the generic code 1UL << ilog2(n) does the right thing for the constant '1' argment too. The only reason roundup needed that special case was because rounding up does so by subtracting one from the argument (and then adding one to the result) causing the obvious problems with "ilog2(0)". But rounddown doesn't do any of that, since ilog2() naturally truncates (ie "rounds down") to the right rounded down value. And without the ilog2(0) case, there's no reason for the special case that had the wrong value. tl;dr: rounddown_pow_of_two(1) should be 1, not 0. Acked-by: Dmitry Torokhov <dtor@vmware.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jz4740) Staticise jz4740_hwmon_driver hwmon: (jz4740) fix signedness bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc: sdhci-s3c: Remove old and misprototyped suspend operations mmc: tmio: fix clock gating on platforms with a .set_pwr() method mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method mmc: core: Fix typo at mmc_card_sleep mmc: core: Fix power_off_notify during suspend mmc: core: Fix setting power notify state variable for non-eMMC mmc: core: Add quirk for long data read time mmc: Add module.h include to sdhci-cns3xxx.c mmc: mxcmmc: fix falling back to PIO mmc: omap_hsmmc: DMA unmap only once in case of MMC error
-
Theodore Ts'o authored
/proc/mounts was showing the mount option [no]init_inode_table when the correct mount option that will be accepted by parse_options() is [no]init_itable. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 12 Dec, 2011 3 commits
-
-
Krzysztof Hałasa authored
Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alex Hermann authored
This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork <bjorn@mork.no> for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann <alex@wenlex.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Keith Packard authored
This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c71062. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@consoleSigned-off-by: Ingo Molnar <mingo@elte.hu>
-