This adds security for IP sockets at the sock level. Security at the
sock level is needed to enforce the SELinux security policy for
security associations even when a sock is orphaned (such as in the TCP
LAST_ACK state).

This will also be used to enforce SELinux controls over data arriving
at or leaving a child socket while it's still waiting to be accepted.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This defines a routine that combines the Type Enforcement portion of
one sid with the MLS portion from the other sid to arrive at a new
sid. This would be used to define a sid for a security association
that is to be negotiated by IKE as well as for determing the sid for
open requests and connection-oriented child sockets.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current approach to labeling Security Associations for SELinux
purposes uses a one-to-one mapping between xfrm policy rules and
security associations.

This doesn't address the needs of real world MLS (Multi-level System,
traditional Bell-LaPadula) environments where a single xfrm policy
rule (pertaining to a range, classified to secret for example) might
need to map to multiple Security Associations (one each for
classified, secret, top secret and all the compartments applicable to
these security levels).

This patch set addresses the above problem by allowing for the mapping
of a single xfrm policy rule to multiple security associations, with
each association used in the security context it is defined for. It
also includes the security context to be used in IKE negotiation in
the acquire messages sent to the IKE daemon so that a unique SA can be
negotiated for each unique security context. A couple of bug fixes are
also included; checks to make sure the SAs used by a packet match
policy (security context-wise) on the inbound and also that the bundle
used for the outbound matches the security context of the flow. This
patch set also makes the use of the SELinux sid in flow cache lookups
seemless by including the sid in the flow key itself. Also, open
requests as well as connection-oriented child sockets are labeled
automatically to be at the same level as the peer to allow for use of
appropriately labeled IPSec associations.

Description of changes:

A "sid" member has been added to the flow cache key resulting in the
sid being available at all needed locations and the flow cache lookups
automatically using the sid. The flow sid is derived from the socket
on the outbound and the SAs (unlabeled where an SA was not used) on
the inbound.

Outbound case:
1. Find policy for the socket.

2. OLD: Find an SA that matches the policy.
 NEW: Find an SA that matches BOTH the policy and the flow/socket.
   This is necessary since not every SA that matches the policy
   can be used for the flow/socket. Consider policy range Secret-TS,
   and SAs each for Secret and TS. We don't want a TS socket to
   use the Secret SA. Hence the additional check for the SA Vs. flow/socket.

3. NEW: When looking thru bundles for a policy, make sure the
        flow/socket can use the bundle. If a bundle is not found,
        create one, calling for IKE if necessary. If using IKE,
        include the security context in the acquire message to the IKE
        daemon.

Inbound case:
1. OLD: Find policy for the socket.
 NEW: Find policy for the incoming packet based on the sid of the
      SA(s) it used or the unlabeled sid if no SAs were
      used. (Consider a case where a socket is "authorized" for two
      policies (unclassified-confidential, secret-top_secret). If the
      packet has come in using a secret SA, we really ought to be
      using the latter policy (secret-top_secret).)

2. OLD: BUG: No check to see if the SAs used by the packet agree with
             the policy sec_ctx-wise.

             (It was indicated in selinux_xfrm_sock_rcv_skb() that
              this was being accomplished by
              (x->id.spi == tmpl->id.spi || !tmpl->id.spi) in xfrm_state_ok,
	      but it turns out tmpl->id.spi
              would normally be zero (unless xfrm policy rules specify one
              at the template level, which they usually don't).
 NEW: The socket is checked for access to the SAs used (based on the
      sid of the SAs) in selinux_xfrm_sock_rcv_skb().

Forward case:
 This would be Step 1 from the Inbound case, followed by Steps 2 and 3
from the Outbound case.

Outstanding items/issues:

- Timewait acknowledgements and such are generated in the
  current/upstream implementation using a NULL socket resulting in the
  any_socket sid (SYSTEM_HIGH) to be used. This problem is not addressed
  by this patch set.

This patch: Add new flask definitions to SELinux

Adds a new avperm "polmatch" to arbitrate flow/state access to a xfrm
policy rule.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.infradead.org/~dwmw2/hdroneline:
  [HEADERS] One line per header in Kbuild files to reduce conflicts

Manual (trivial) conflict resolution in include/asm-s390/Kbuild

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Remove overzealous BUG_ON()
  ocfs2: Don't print on unknown remote blocking call
  ocfs2: Remove EXPERIMENTAL dependency
  ocfs2: implement directory read-ahead
  ocfs2: properly update i_mtime on buffered write
  ocfs2: Fix directory link count checks in ocfs2_link()
  ocfs2: move nlink check in ocfs2_mknod()
  ocfs2: Fix heartbeat sector calculation
  [PATCH] fs/ocfs2/ioctl.c should #include "ioctl.h"
  ocfs2: add ext2 attributes
  configfs: Prevent duplicate subsystem names.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits)
  [BLOCK] dm-crypt: trivial comment improvements
  [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available
  [CRYPTO] padlock: Convert padlock-sha to use crypto_hash
  [CRYPTO] users: Use crypto_comp and crypto_has_*
  [CRYPTO] api: Add crypto_comp and crypto_has_*
  [CRYPTO] users: Use crypto_hash interface instead of crypto_digest
  [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
  [CRYPTO] digest: Remove old HMAC implementation
  [CRYPTO] doc: Update documentation for hash and me
  [SCTP]: Use HMAC template and hash interface
  [IPSEC]: Use HMAC template and hash interface
  [CRYPTO] tcrypt: Use HMAC template and hash interface
  [CRYPTO] hmac: Add crypto template implementation
  [CRYPTO] digest: Added user API for new hash type
  [CRYPTO] api: Mark parts of cipher interface as deprecated
  [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
  [CRYPTO] drivers: Remove obsolete block cipher operations
  [CRYPTO] users: Use block ciphers where applicable
  [SUNRPC] GSS: Use block ciphers where applicable
  [IPSEC] ESP: Use block ciphers where applicable
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [S390] hypfs crashes with invalid mount option.
  [S390] cio: subchannel evaluation function operates without lock
  [S390] cio: always query all paths on path verification.
  [S390] cio: update path groups on logical CHPID changes.
  [S390] cio: subchannels in no-path state.
  [S390] Replace nopav-message on VM.
  [S390] set modalias for ccw bus uevents.
  [S390] Get rid of DBG macro.
  [S390] Use alternative user-copy operations for new hardware.
  [S390] Make user-copy operations run-time configurable.
  [S390] Cleanup in signal handling code.
  [S390] Cleanup in page table related code.
  [S390] Linux API for writing z/VM APPLDATA Monitor records.
  [S390] xpram off by one error.
  [S390] Remove kexec experimental flag.
  [S390] cleanup appldata.
  [S390] fix typo in vmcp.
  [S390] Kernel stack overflow handling.
  [S390] qdio slsb processing state.
  [S390] Missing initialization in common i/o layer.
  ...

* git://git.infradead.org/mtd-2.6:
  Remove accidentally-added include/linux/utsrelease.h
  Revert "[MTD] blkdev helper code: fix printk format warning"
  [MTD] Add SSFDC (SmartMedia) read-only translation layer
  [MTD] pmc551 pci cleanup
  [MTD] pmc551 use kzalloc
  [MTD] pmc551 whitespace cleanup
  [MTD] Remove iq80310 map driver
  [MTD NAND] Fix in typo ndfc.c causing wrong ECC layout
  [MTD] physmap: add power management support
  ioremap balanced with iounmap for drivers/mtd subsystem
  [MTD] Switch to pci_get_device and do ref counting
  [MTD] blkdev helper code: fix printk format warning
  [MTD] Fix ixp4xx partition parsing.
  [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h
  [MTD NAND] Remove old code in au1550nd.c
  [MTD] Unlock NOR flash automatically where necessary

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (114 commits)
  [POWERPC] Fix ohare IDE irq workaround on old powermacs
  [POWERPC] EEH: Power4 systems sometimes need multiple resets.
  [POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t.
  [POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c
  [POWERPC] Maple U3 HT - reject inappropriate config space access
  [POWERPC] Fix IPIC pending register assignments
  [POWERPC] powerpc: fix building gdb against asm/ptrace.h
  [POWERPC] Remove DISCONTIGMEM cruft from page.h
  [POWERPC] Merge iSeries i/o operations with the rest
  [POWERPC] 40x: Fix debug status register defines
  [POWERPC] Fix compile error in sbc8560
  [POWERPC] EEH: support MMIO enable recovery step
  [POWERPC] EEH: enable MMIO/DMA on frozen slot
  [POWERPC] EEH: code comment cleanup
  [POWERPC] EEH: balance pcidev_get/put calls
  [POWERPC] PPC: Fix xmon stack frame address in backtrace
  [POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX
  [POWERPC] Start arch/powerpc/boot code reorganization
  [POWERPC] Define of_read_ulong helper
  [POWERPC] iseries: eliminate a couple of warnings
  ...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

This reverts commit 668040fc.

The 'flags' field of the struct request is 'unsigned long'. Quite
how Randy came to see 'long int format, different type arg' I don't
know, but it doesn't seem to be the case any more.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Use pci_resource_start for getting start of regions and pci_iomap to not
doing this directly by using dev->resource... (Thanks to Rolf Eike Beer)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Use kzalloc instad of kmalloc+memset(0).
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Spaces were used for indent, there was more than 80 columns per line. Get
rid of that stuff.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

The iq80310 mtd map driver depends on ARCH_IQ80310, which isn't
defined anywhere in the tree (as we don't have 80310 support), and
furthermore, everything the driver does can be done with physmap
instead.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Due to this typo, a wrong ECC layout table is chosen.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Implement PM handling for physmap.  Idea from Steven Scholz, patch
by David Anders.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Tested (compilation only) with:
- allmodconfig
- Modifying drivers/mtd/maps/Kconfig and drivers/mtd/nand/Kconfig to
make sure that the changed file is compiling without warning
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Fix printk format warning(s):
drivers/mtd/mtd_blkdevs.c:72: warning: long int format, different type arg (arg 2)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

If the amount of flash is not divisible by 2 then the mask in
parse_mtd_partitions would fail to work as designed.  Passing in the base
address corrects this problem.
Signed-off-by: Brian Walsh <brian@walsh.ws>
Cc: Deepak Sanexa <dsanexa@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

We certainly don't need the check for Linux version > 2.5.2, and in fact
we can also live without the __ECOS check, since we can just add it back
in the eCos git tree which is automatically derived from the Linux fs/jffs2
subdirectory in the upstream git tree.
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Introduce the MTD_STUPID_LOCK flag which indicates that the flash chip is
always locked after power-up, so all sectors need to be unlocked before it
is usable.

If this flag is set, and the chip provides an unlock() operation,
mtd_add_device will unlock the whole MTD device if it's writeable.  This
means that non-writeable partitions will stay locked.

Set MTD_STUPID_LOCK in fixup_use_atmel_lock() so that these chips will work
as expected.
Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Looks like a workaround for old bogus OF bitrot...  This fixes it and
hence fixes boot on some performa machines.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

On detection of an EEH error, some Power4 systems seem to occasionally
want to be reset twice before they report themselves as fully recovered.
This patch re-arranges the code to attempt additional resets if the first
one doesn't take.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch causes fsl_soc.h to import the definition of phys_addr_t
itself, rather than relying on its includer to do so.
Signed-off-by: Scott Wood <scott@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Noticed that the U3_*CFA macros have some typos:

#define U3_HT_CFA0(devfn, off)		\
		((((unsigned long)devfn) << 8) | offset)

(refers to offset rather than off)

#define U3_AGP_CFA0(devfn, off)	\
	((1 << (unsigned long)PCI_SLOT(dev_fn)) \
	| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \

(refers to dev_fn rather than devfn)

Things happen to work, but there doesn't seem to be any reason these
shouldn't be functions.  Overall behavior should be unchanged.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

When there is a PCI-X mode 2 capable device behind the HT<->PCI-X
bridge, the pci core decides that the device has the extended 4K
config space, even though the bus is not operating in mode 2.  This is
because the u3_ht pci ops silently accept offsets greater than 255 but
use only the 8 least significant bits, which means reading at offset
0x100 gets the data at offset 0x0, and causes confusion for lspci.

Reject accesses to configuration space offsets greater than 255.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch fixes the assignment of pending registers to IRQ numbers for
the IPIC; the code previously assigned all IRQs to the high pending word
regardless of which word the interrupt belonged to.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Ulrich Weigand found a bug with the current version of the
asm-powerpc/ptrace.h that prevents building at least the
SPU target version of gdb, since some ptrace opcodes are
not defined.

The problem seems to have originated in the merging of 32 and
64 bit versions of that file, the problem is that some opcodes
are only valid on 64 bit kernels, but are also used by 32 bit
programs, so they can't depends on the __powerpc64__ symbol.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This looks like cruft to me, these functions don't exist AFAICT,
and I can't see that it's possible to even enable DISCONTIGMEM on
powerpc anymore. CC'ing some folks who might know better, based on
the who-touched-it-last principle.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch changes the io operations so that they are out of line if
CONFIG_PPC_ISERIES is set and includes a firmware feature check in
that case.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This fixes some debug register defines on PPC 40x that were incorrect.
Signed-off-by: Josh Boyer <jdub@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The following fixes compile errors in sbc8560.
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Update to the PowerPC PCI error recovery code.

Add code to enable MMIO if a device driver reports that it is capable
of recovering on its own.  One anticipated use of this having a device
driver enable MMIO so that it can take a register dump, which might
then be followed by the device driver requesting a full reset.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add wrapper around the rtas call to enable MMIO or DMA on a frozen pci
slot.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Clean up subroutine documentation; mostly formatting changes, with
some new content.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This corrects a pci_dev get/put imbalance that can occur only in
highly unlikely situations (kmalloc failures, pci devices with
overlapping resource addresses).  No actual failures seen, this was
spotted during code review.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>