- 26 Sep, 2013 31 commits
-
-
Lee Jones authored
This patch enables clocks to be specified from Device Tree via phandles to the "prcc-kernel-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
This patch enables clocks to be specified from Device Tree via phandles to the "prcc-periph-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
This patch enables clocks to be specified from Device Tree via phandles to the "prcmu-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
PRCC (peripheral and kernel) clocks are specified using a property tuple <&phandle base bit>, where 'base' is the peripheral (1, 2, 3, 5 or 6), and bit is read-in value into that peripheral stipulated by the hardware specification. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
The functional components will be added on a per-clock basis. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Here we're using the old clock initialisation function as a template. It's necessary to remove all of the clk_register_clkdev() calls as they don't make sense when booting with Device Tree. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
There is no mention of the PRCMU_BML8580CLK in any of the Design Specifications for the chips supported in Mainline. In fact, where it is incorrectly used in the u8540 clock definition driver it would have the side effect of using the incorrect clock management address ([PRCM_BML8580CLK_MGT] 0x108 instead of the correct value 0x04C). Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
When booting with DT enabled we already call clocksource_of_init(), which in turn calls the OF version of nmdk_timer_init(). Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
The MTU0 is required for full booting of the system. The driver has been previously DT:ed and is in use on the Nomadik platform, but we also need to enable it on ux500 based systems. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
The platform which it pertains to is no longer supported and is actually causing some confusion in the new common clock implementation. A recent patch removed its use in the clock driver, let's take out the definitions too. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
These are required to request DBx500 PRCMU clocks from Device Tree. The numbers used are taken directly from the Hardware Specification document. We're moving them from the DBx500 PRCMU include file into the DT include directory and referencing them from the former via a #include. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
... as stipulated by the Hardware Specification document. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Sebastian Andrzej Siewior authored
The "mentor,musb" binding isn't documented so I was about to document it. The node is missing a few properties for configuration like "multipoint", "dyn_fifo", "num_eps" or "ram_bits". However I am not sure "missing" is the right word here because some of those informations might be obtained from the chip itself but it is not done (yet). Further the ePARP 2.3.1 says the matching goes from left to right taking the fist match. Right now there is jus a driver for "stericsson,db8500-musb" and none for "mentor,musb". I'm not 100% that it is simply possible to have a generic since even for DMA we have ifdefs in the driver between "generic mentor dma" and "ux500 dma" and I mean within musb and not the dma code. For that reason (that I am not sure a generic musb binding is possible and how its binding / required properties will look like) and the reason that we have here a minor binding without a driver to look at I suggest to remove that binding. If the majority of people prefer to keep this binding I'm curious how the documentation of the binding should look like. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
These regulator rail names are already set in the ste-href.dtsi file included by this file, this is just redoing the naming for no benefit, so delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The Ux500 boards are layered like this: ste-snowball.dts includes ste-href.dtsi that includes ste-dbx500.dtsi. The dbx500.dtsi defines the PRCMU SoC regulators so the SoC will probe and you can use ampersand references where need be. However the HREF common dtsi and these two boards redefine the same PRCMU SoC regulators with the very same names and properties for no reason. This is like filling in the same line three times instead of drawing it once. Just delete the surplus references and have the PRCMU regulators defines in the SoC files ste-dbx500.dtsi, this is enough. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Turns out that they're actually not required and the driver probes just fine without them. The ID is incorrect at the moment anyway. They actually currently specify the stn8815. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 16 Sep, 2013 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer code update from Thomas Gleixner: - armada SoC clocksource overhaul with a trivial merge conflict - Minor improvements to various SoC clocksource drivers * 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding clocksource: armada-370-xp: Get reference fixed-clock by name clocksource: armada-370-xp: Replace WARN_ON with BUG_ON clocksource: armada-370-xp: Fix device-tree binding clocksource: armada-370-xp: Introduce new compatibles clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE clocksource: armada-370-xp: Simplify TIMER_CTRL register access clocksource: armada-370-xp: Use BIT() ARM: timer-sp: Set dynamic irq affinity ARM: nomadik: add dynamic irq flag to the timer clocksource: sh_cmt: 32-bit control register support clocksource: em_sti: Convert to devm_* managed helpers
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Two minor cifs fixes and a minor documentation cleanup for cifs.txt" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs.txt and remove some outdated infos cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache cifs: Do not take a reference to the page in cifs_readpage_worker()
-
git://git.infradead.org/linux-ubiLinus Torvalds authored
Pull UBI fixes from Artem Bityutskiy: "Just a single fastmap fix plus a regression fix" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi: UBI: Fix invalidate_fastmap() UBI: Fix PEB leak in wear_leveling_worker()
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull ubifs fix from Artem Bityutskiy: "Just one patch which fixes the power-cut recovery testing mode. I'll start using a single UBI/UBIFS tree instead of 2 trees from now on. So in the future you'll get 1 small pull request instead of 2 tiny ones" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: remove invalid warn msg with tst_recovery enabled
-
- 15 Sep, 2013 4 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "These are four patches for three construction sites: - Fix register decoding for the combination of multi-core processors and multi-threading. - Two more fixes that are part of the ongoing DECstation resurrection work. One of these touches a DECstation-only network driver. - Finally Markos' trivial build fix for the AP/SP support. (With this applied now all MIPS defconfigs are building again)" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kernel: vpe: Make vpe_attrs an array of pointers. MIPS: Fix SMP core calculations when using MT support. MIPS: DECstation I/O ASIC DMA interrupt handling fix MIPS: DECstation HRT initialization rearrangement
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform updates from Matthew Garrett: "Nothing amazing here, almost entirely cleanups and minor bugfixes and one bit of hardware enablement in the amilo-rfkill driver" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: platform/x86: panasonic-laptop: reuse module_acpi_driver samsung-laptop: fix config build error platform: x86: remove unnecessary platform_set_drvdata() amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310. wmi: parse_wdg() should return kernel error codes hp_wmi: Fix unregister order in hp_wmi_rfkill_setup() platform: replace strict_strto*() with kstrto*() x86: irst: use module_acpi_driver to simplify the code x86: smartconnect: use module_acpi_driver to simplify the code platform samsung-q10: use ACPI instead of direct EC calls thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk thinkpad_acpi: return -NODEV while operating uninitialized LEDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI driver updates from James Bottomley: "This patch set is a set of driver updates (megaraid_sas, fnic, lpfc, ufs, hpsa) we also have a couple of bug fixes (sd out of bounds and ibmvfc error handling) and the first round of esas2r checker fixes and finally the much anticipated big endian additions for megaraid_sas" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (47 commits) [SCSI] fnic: fnic Driver Tuneables Exposed through CLI [SCSI] fnic: Kernel panic while running sh/nosh with max lun cfg [SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset [SCSI] fnic: Remove QUEUE_FULL handling code [SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up [SCSI] fnic: FC stat param seconds_since_last_reset not getting updated [SCSI] sd: Fix potential out-of-bounds access [SCSI] lpfc 8.3.42: Update lpfc version to driver version 8.3.42 [SCSI] lpfc 8.3.42: Fixed issue of task management commands having a fixed timeout [SCSI] lpfc 8.3.42: Fixed inconsistent spin lock usage. [SCSI] lpfc 8.3.42: Fix driver's abort loop functionality to skip IOs already getting aborted [SCSI] lpfc 8.3.42: Fixed failure to allocate SCSI buffer on PPC64 platform for SLI4 devices [SCSI] lpfc 8.3.42: Fix WARN_ON when driver unloads [SCSI] lpfc 8.3.42: Avoided making pci bar ioremap call during dual-chute WQ/RQ pci bar selection [SCSI] lpfc 8.3.42: Fixed driver iocbq structure's iocb_flag field running out of space [SCSI] lpfc 8.3.42: Fix crash on driver load due to cpu affinity logic [SCSI] lpfc 8.3.42: Fixed logging format of setting driver sysfs attributes hard to interpret [SCSI] lpfc 8.3.42: Fixed back to back RSCNs discovery failure. [SCSI] lpfc 8.3.42: Fixed race condition between BSG I/O dispatch and timeout handling [SCSI] lpfc 8.3.42: Fixed function mode field defined too small for not recognizing dual-chute mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull SLAB update from Pekka Enberg: "Nothing terribly exciting here apart from Christoph's kmalloc unification patches that brings sl[aou]b implementations closer to each other" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: slab: Use correct GFP_DMA constant slub: remove verify_mem_not_deleted() mm/sl[aou]b: Move kmallocXXX functions to common code mm, slab_common: add 'unlikely' to size check of kmalloc_slab() mm/slub.c: beautify code for removing redundancy 'break' statement. slub: Remove unnecessary page NULL check slub: don't use cpu partial pages on UP mm/slub: beautify code for 80 column limitation and tab alignment mm/slub: remove 'per_cpu' which is useless variable
-