There's no need to alias the kallsyms-related symbols to a dummy
variable, we can as well just do the sanity check against NULL.

  Allow for different LMA vs VMA (logical/virtual memory address).
  IA-64 uses the LMA to tell the bootloader the physical location
  of the image, whereas the VMA as always represents the address the
  image gets mapped to.
  
  The default (used for non IA-64) is LMA == VMA, which is what
  the linker previously assumed anyway.
  
Also:
o remove duplicate .rodata1 section
o __vermagic doesn't need its own section in vmlinux, it can
  just go into .rodata
o .kstrtab hasn't been used since the introduction of the new
  module loader, so it should be deleted from the linker scripts
  as well (except for arch/um, which does not seem up to date
  w.r.t the new module loader yet)
o The kallsyms mechanism has changed to not need its own section,
  so again the references in the linker scripts can go away

The current code reserves 60 bytes for the symbol string of every
exported symbol, unnecessarily wasting kernel memory since most symbols
are much shorter. We revert to the 2.4 solution where the actual strings
are saved out of line and only the pointers are kept.

The latest module-init-tools already handle this case, people who are
using older versions need to update to make sure depmod works
properly.

Saves 80 KB in vmlinux with my .config.

From: James Bottomley <James.Bottomley@steeleye.com>
  
kallsyms is broken in parisc on 2.5.56 again because of assembler syntax
subtleties.  This is the offending line:
  
printf("\t.byte 0x%02x ; .asciz\t\"%s\"\n"
  
Note the `;' separating the two statements.  On some platforms `;' is a
comment in assembly code, and thus the following .asciz is ignored.

into home.transmeta.com:/home/torvalds/v2.5/linux

into kernel.bkbits.net:/home/davem/net-2.5

into kernel.bkbits.net:/home/davem/sparc-2.5

The current LOG_BUF size is a bit confusing the first
time that "make oldconfig" is used.  It's difficult to
select anything other than the default value.

Also, you (Linus) expressed a desire to have this
configurable only if DEBUG_KERNEL or "kernel hacking"
was enabled, so I've changed it to accomplish that.

This patch also uses Kconfig in a way that Roman intended
since a patch in 2.5.52 which enables default values if
a prompt is not enabled, but lets values be chosen when
the prompt is enabled.  You also asked for this in setting
this config option.

into home.transmeta.com:/home/torvalds/v2.5/linux

This provides for separate global and per-thread debug control
register value(s), which are switched as appropriate.  This allows
us to use both an external JTAG debugger for debugging the kernel
as well as using gdb to debug user programs.

This is needed for Open Firmware on older powermacs to be able to
load the wrapper.  Without this OF gives a "CLAIM failed" error.

device model.

into samba.org:/home/paulus/kernel/for-linus-ppc

into kernel.bkbits.net:/home/davem/sparc-2.5

probing tells us they already have a range. The old information is
stale.

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-core

Some error checking was added ca. 2.5.58 that would remove a device from 
its bus's list of devices if device_attach() returned an error. This 
included errors returned from drv->probe(), and the -ENODEV error returned
if the device wasn't bound to any driver.

This was BAD since it was perfectly fine for a device not to bind to a 
driver immediately, and for drivers to return an error on probe() if the 
device doesn't exactly qualify as one it supports. 

This changes device_attach() and driver_attach() to both return void, 
instead of an error, since they really can never fail hard enough to cause
the device or driver to be removed from the bus. 

a condensed version.

multiple times under certain circumstances.

This fixes svc_tcp_recvfrom().

Found by Ted Phelps <phelps@dstc.edu.au>

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

The pci_enable_device() function will fail at least on i386 (see
arch/i386/pci/i386.c: pcibios_enable_resource (line 260)) if the
resources have not been assigned previously.  Hence the ostensible
resource collisions.

I added a small comment (and modified another) so future janitors won't
move pci_enable above pci_assign_resource again.

Here are some minor fixes and cleanups to the cpia (Creative WebCam II et
al) driver.  These have been extracted from the sourceforge CVS archive,
and I'd like to get these in before a larger change to the parallel port
code to support more transfer modes.

This patch contains:
  * cpia: use the <linux/list.h> list implementation, instead of cpia specific
    version.
  * cpia_pp: don't clear camera list after cameras have been registered (as
    this prevents them being deregistered, and oops after module
    unload).
  * hold cpia_pp list spinlock while walking list, not just during the
    element removal.

into tetrachloride.(none):/mnt/stuff/kernel/2.5/agpgart

into tetrachloride.(none):/mnt/stuff/kernel/2.5/agpgart

into kroah.com:/home/linux/linux/BK/gregkh-2.5

  speedtouch: use SpeedTouch everywhere (was sometimes Speed Touch).

  speedtouch: make more functions static.

  speedtouch: kill receive queue tasklet on shutdown (race pointed
out by Oliver Neukum).