- 27 Jan, 2018 1 commit
-
-
H. Peter Anvin authored
Due to some unfortunate events, I have not been directly involved in the x86 kernel patch flow for a while now. I have also not been able to ramp back up by now like I had hoped to, and after reviewing what I will need to work on both internally at Intel and elsewhere in the near term, it is clear that I am not going to be able to ramp back up until late 2018 at the very earliest. It is not acceptable to not recognize that this load is currently taken by Ingo and Thomas without my direct participation, so I mark myself as R: (designated reviewer) rather than M: (maintainer) until further notice. This is in fact recognizing the de facto situation for the past few years. I have obviously no intention of going away, and I will do everything within my power to improve Linux on x86 and x86 for Linux. This, however, puts credit where it is due and reflects a change of focus. This patch also removes stale entries for portions of the x86 architecture which have not been maintained separately from arch/x86 for a long time. If there is a reason to re-introduce them then that can happen later. Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bruce Schlobohm <bruce.schlobohm@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 26 Jan, 2018 2 commits
-
-
Andy Lutomirski authored
On a 5-level kernel, if a non-init mm has a top-level entry, it needs to match init_mm's, but the vmalloc_fault() code skipped over the BUG_ON() that would have checked it. While we're at it, get rid of the rather confusing 4-level folded "pgd" logic. Cleans-up: b50858ce ("x86/mm/vmalloc: Add 5-level paging support") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Neil Berrington <neil.berrington@datacore.com> Link: https://lkml.kernel.org/r/2ae598f8c279b0a29baf75df207e6f2fdddc0a1b.1516914529.git.luto@kernel.org
-
Andy Lutomirski authored
Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses large amounts of vmalloc space with PTI enabled. The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd folding code into account, so, on a 4-level kernel, the pgd synchronization logic compiles away to exactly nothing. Interestingly, the problem doesn't trigger with nopti. I assume this is because the kernel is mapped with global pages if we boot with nopti. The sequence of operations when we create a new task is that we first load its mm while still running on the old stack (which crashes if the old stack is unmapped in the new mm unless the TLB saves us), then we call prepare_switch_to(), and then we switch to the new stack. prepare_switch_to() pokes the new stack directly, which will populate the mapping through vmalloc_fault(). I assume that we're getting lucky on non-PTI systems -- the old stack's TLB entry stays alive long enough to make it all the way through prepare_switch_to() and switch_to() so that we make it to a valid stack. Fixes: b50858ce ("x86/mm/vmalloc: Add 5-level paging support") Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org
-
- 24 Jan, 2018 3 commits
-
-
Borislav Petkov authored
Commit 24c25032 ("x86/microcode: Do not access the initrd after it has been freed") fixed attempts to access initrd from the microcode loader after it has been freed. However, a similar KASAN warning was reported (stack trace edited): smpboot: Booting Node 0 Processor 1 APIC 0x11 ================================================================== BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50 Read of size 1 at addr ffff880035ffd000 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7 Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016 Call Trace: dump_stack print_address_description kasan_report ? find_cpio_data __asan_report_load1_noabort find_cpio_data find_microcode_in_initrd __load_ucode_amd load_ucode_amd_ap load_ucode_ap After some investigation, it turned out that a merge was done using the wrong side to resolve, leading to picking up the previous state, before the 24c25032 fix. Therefore the Fixes tag below contains a merge commit. Revert the mismerge by catching the save_microcode_in_initrd_amd() retval and thus letting the function exit with the last return statement so that initrd_gone can be set to true. Fixes: f26483ea ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts") Reported-by: <higuita@gmx.net> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=198295 Link: https://lkml.kernel.org/r/20180123104133.918-2-bp@alien8.de
-
Jia Zhang authored
Commit b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") reduced the impact of erratum BDF90 for Broadwell model 79. The impact can be reduced further by checking the size of the last level cache portion per core. Tony: "The erratum says the problem only occurs on the large-cache SKUs. So we only need to avoid the update if we are on a big cache SKU that is also running old microcode." For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. Fixes: b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.com
-
Xiao Liang authored
The AMD power module can be loaded on non AMD platforms, but unload fails with the following Oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: __list_del_entry_valid+0x29/0x90 Call Trace: perf_pmu_unregister+0x25/0xf0 amd_power_pmu_exit+0x1c/0xd23 [power] SyS_delete_module+0x1a8/0x2b0 ? exit_to_usermode_loop+0x8f/0xb0 entry_SYSCALL_64_fastpath+0x20/0x83 Return -ENODEV instead of 0 from the module init function if the CPU does not match. Fixes: c7ab62bf ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism") Signed-off-by: Xiao Liang <xiliang@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180122061252.6394-1-xiliang@redhat.com
-
- 23 Jan, 2018 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix AMD regression due to not re-enabling the big window on resume (Christian König)" * tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Enable AMD 64-bit window on resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix divide by zero in mlx5, from Talut Batheesh. 2) Guard against invalid GSO packets coming from untrusted guests and arriving in qdisc_pkt_len_init(), from Eric Dumazet. 3) Similarly add such protection to the various protocol GSO handlers. From Willem de Bruijn. 4) Fix regression added to IGMP source address checking for IGMPv3 reports, from Felix Feitkau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tls: Correct length of scatterlist in tls_sw_sendpage be2net: restore properly promisc mode after queues reconfiguration net: igmp: fix source address check for IGMPv3 reports gso: validate gso_type in GSO handlers net: qdisc_pkt_len_init() should be more robust ibmvnic: Allocate and request vpd in init_resources ibmvnic: Revert to previous mtu when unsupported value requested ibmvnic: Modify buffer size and number of queues on failover rds: tcp: compute m_ack_seq as offset from ->write_seq usbnet: silence an unnecessary warning cxgb4: fix endianness for vlan value in cxgb4_tc_flower cxgb4: set filter type to 1 for ETH_P_IPV6 net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare
-
Ben Hutchings authored
Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Jan, 2018 18 commits
-
-
Martin Brandenburg authored
In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Martin Brandenburg authored
set_op_state_purged can delete the op. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Watson authored
The scatterlist is reused by both sendmsg and sendfile. If a sendmsg of smaller number of pages is followed by a sendfile of larger number of pages, the scatterlist may be too short, resulting in a crash in gcm_encrypt. Add sg_unmark_end to make the list the correct length. tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates memory in alloc_sg, or in zerocopy_from_iter. Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
The commit 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Felix Fietkau authored
Commit "net: igmp: Use correct source address on IGMPv3 reports" introduced a check to validate the source address of locally generated IGMPv3 packets. Instead of checking the local interface address directly, it uses inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the local subnet (or equal to the point-to-point address if used). This breaks for point-to-point interfaces, so check against ifa->ifa_local directly. Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017acc ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Without proper validation of DODGY packets, we might very well feed qdisc_pkt_len_init() with invalid GSO packets. tcp_hdrlen() might access out-of-bound data, so let's use skb_header_pointer() and proper checks. Whole story is described in commit d0c081b4 ("flow_dissector: properly cap thoff field") We have the goal of validating DODGY packets earlier in the stack, so we might very well revert this fix in the future. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jason Wang <jasowang@redhat.com> Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
John Allen says: ==================== ibmvnic: Reset behavior fixes This patchset fixes a number of issues related to ibmvnic reset uncovered from testing new Power9 machines with Everglades adapters and the new functionality to change mtu and other parameters in the driver. Changes since v1: -In patch 1/3, added the line to free the long term buffers before allocating a new one. This change inadvertently uncovered the problem that the number of queues can change after a failover as well. To fix this, we check whether or not the number of queues has changed in do_reset and if they have, we do a full release and init of the queues. -In patch 1/3, added variables to the adapter struct to track how many rx/tx pools have actually been allocated and modify the release pools routines to use these values rather than the possibly incorrect req_rx/tx_queues values. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Allen authored
In reset events in which our memory allocations need to be reallocated, VPD data is being freed, but never reallocated. This can cause issues if we later attempt to access that memory or reset and attempt to free the memory. This patch moves the allocation of the VPD data to init_resources so that it will be symmetrically freed during release resources. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Allen authored
If we request an unsupported mtu value, the vnic server will suggest a different value. Currently we take the suggested value without question and login with that value. However, the behavior doesn't seem completely sane as attempting to change the mtu to some specific value will change the mtu to some completely different value most of the time. This patch fixes the issue by logging in with the previously used mtu value and printing an error message saying that the given mtu is unsupported. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Allen authored
Using newer backing devices can cause the required padding at the end of buffer as well as the number of queues to change after a failover. Since we currently assume that these values never change, after a failover to a backing device with different capabilities, we can get errors from the vnic server, attempt to free long term buffers that are no longer there, or not free long term buffers that should be freed. This patch resolves the issue by checking whether any of these values change, and if so perform the necessary re-allocations. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
rds-tcp uses m_ack_seq to track the tcp ack# that indicates that the peer has received a rds_message. The m_ack_seq is used in rds_tcp_is_acked() to figure out when it is safe to drop the rds_message from the RDS retransmit queue. The m_ack_seq must be calculated as an offset from the right edge of the in-flight tcp buffer, i.e., it should be based on the ->write_seq, not the ->snd_nxt. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
That a kevent could not be scheduled is not an error. Such handlers must be able to deal with multiple events anyway. As the successful scheduling of a work is a debug event, make the failure debug priority, too. V2: coding style Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Cristian Caravena <caravena@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a divide by zero due to wrong if (src_reg == 0) check in 64-bit mode. Properly handle this in interpreter and mask it also generically in verifier to guard against similar checks in JITs, from Eric and Alexei. 2) Fix a bug in arm64 JIT when tail calls are involved and progs have different stack sizes, from Daniel. 3) Reject stores into BPF context that are not expected BPF_STX | BPF_MEM variant, from Daniel. 4) Mark dst reg as unknown on {s,u}bounds adjustments when the src reg has derived bounds from dead branches, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Don't change endianness when assigning vlan value in cxgb4_tc_flower code when processing flow match parameters. The value gets converted to network order as part of filtering code in set_filter_wr. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower code when processing flow match parameters. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill A. Shutemov authored
The new helper would check if the pfn belongs to the page. For huge pages it checks if the PFN is within range covered by the huge page. The helper is used in check_pte(). The original code the helper replaces had two call to page_to_pfn(). page_to_pfn() is relatively costly. Although current GCC is able to optimize code to have one call, it's better to do this explicitly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
Tetsuo reported random crashes under memory pressure on 32-bit x86 system and tracked down to change that introduced page_vma_mapped_walk(). The root cause of the issue is the faulty pointer math in check_pte(). As ->pte may point to an arbitrary page we have to check that they are belong to the section before doing math. Otherwise it may lead to weird results. It wasn't noticed until now as mem_map[] is virtually contiguous on flatmem or vmemmap sparsemem. Pointer arithmetic just works against all 'struct page' pointers. But with classic sparsemem, it doesn't because each section memap is allocated separately and so consecutive pfns crossing two sections might have struct pages at completely unrelated addresses. Let's restructure code a bit and replace pointer arithmetic with operations on pfns. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 21 Jan, 2018 8 commits
-
-
Talat Batheesh authored
Helmut reported a bug about division by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is division by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by: Helmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti fixes from Thomas Gleixner: "A small set of fixes for the meltdown/spectre mitigations: - Make kprobes aware of retpolines to prevent probes in the retpoline thunks. - Make the machine check exception speculation protected. MCE used to issue an indirect call directly from the ASM entry code. Convert that to a direct call into a C-function and issue the indirect call from there so the compiler can add the retpoline protection, - Make the vmexit_fill_RSB() assembly less stupid - Fix a typo in the PTI documentation" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retpoline: Optimize inline assembler for vmexit_fill_RSB x86/pti: Document fix wrong index kprobes/x86: Disable optimizing on the function jumps to indirect thunk kprobes/x86: Blacklist indirect thunk functions for kprobes retpoline: Introduce start/end markers of indirect thunk x86/mce: Make machine check speculation protected
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 kexec fix from Thomas Gleixner: "A single fix for the WBINVD issue introduced by the SME support which causes kexec fails on non AMD/SME capable CPUs. Issue WBINVD only when the CPU has SME and avoid doing so in a loop" [ Side note: this patch fixes the problem, but it isn't entirely clear why it is required. The wbinvd should just work regardless, but there seems to be some system - as opposed to CPU - issue, since the wbinvd causes more problems later in the shutdown sequence, but wbinvd instructions while the system is still active are not problematic. Possibly some SMI or pending machine check issue on the affected system ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Rework wbinvd, hlt operation in stop_this_cpu()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for the new matrix allocator to prevent vector exhaustion by certain network drivers which allocate gazillions of unused vectors which cannot be put into reservation mode due to MSI and the lack of MSI entry masking. The fix/workaround is to spread the vectors across CPUs by searching the supplied target CPU mask for the CPU with the smallest number of allocated vectors" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/matrix: Spread interrupts on allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alphaLinus Torvalds authored
Pull alpha fixes from Matt Turner: "A build fix and a regression fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha/PCI: Fix noname IRQ level detection alpha: extend memset16 to EV6 optimised routines
-
Laura Abbott authored
Commit bacf6b49 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping") moved some parameters into a structure. The structure was large enough to trigger the stack protection canary in sme_encrypt_kernel which doesn't work this early, causing reboots. Mark sme_encrypt_kernel appropriately to not use the canary. Fixes: bacf6b49 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping") Signed-off-by: Laura Abbott <labbott@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lorenzo Pieralisi authored
The conversion of the alpha architecture PCI host bridge legacy IRQ mapping/swizzling to the new PCI host bridge map/swizzle hooks carried out through: commit 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") implies that IRQ for devices are now allocated through pci_assign_irq() function in pci_device_probe() that is called when a driver matching a device is found in order to probe the device through the device driver. Alpha noname platforms required IRQ level programming to be executed in sio_fixup_irq_levels(), that is called in noname_init_pci(), a platform hook called within a subsys_initcall. In noname_init_pci(), present IRQs are detected through sio_collect_irq_levels() that check the struct pci_dev->irq number to detect if an IRQ has been allocated for the device. By the time sio_collect_irq_levels() is called, some devices may still have not a matching driver loaded to match them (eg loadable module) therefore their IRQ allocation is still pending - which means that sio_collect_irq_levels() does not programme the correct IRQ level for those devices, causing their IRQ handling to be broken when the device driver is actually loaded and the device is probed. Fix the issue by adding code in the noname map_irq() function (noname_map_irq()) that, whilst mapping/swizzling the IRQ line, it also ensures that the correct IRQ level programming is executed at platform level, fixing the issue. Fixes: 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # 4.14 Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Meelis Roos <mroos@linux.ee> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
- 20 Jan, 2018 4 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - fix incorrect huge page mappings on systems using the contiguous hint for hugetlbfs - support alternative GICv4 init sequence - correctly implement the ARM SMCC for HVC and SMC handling PPC: - add KVM IOCTL for reporting vulnerability and workaround status s390: - provide userspace interface for branch prediction changes in firmware x86: - use correct macros for bits" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: wire up bpb feature KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs() arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls KVM: arm64: Fix GICv4 init when called from vgic_its_create KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds authored
Pull MIPS fixes from James Hogan: "Some final MIPS fixes for 4.15, including important build fixes and a MAINTAINERS update: - Add myself as MIPS co-maintainer. - Fix various all*config build failures (particularly as a result of switching the default MIPS platform to the "generic" platform). - Fix GCC7 build failures (duplicate const and questionable calls to missing __multi3 intrinsic on mips64r6). - Fix warnings when CPU Idle is enabled (4.14). - Fix AR7 serial output (since 3.17). - Fix ralink platform_get_irq error checking (since 3.12)" * tag 'mips_fixes_4.15_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MAINTAINERS: Add James as MIPS co-maintainer MIPS: Fix undefined reference to physical_memsize MIPS: Implement __multi3 for GCC7 MIPS64r6 builds MIPS: mm: Fix duplicate "const" on insn_table_MM MIPS: CM: Drop WARN_ON(vp != 0) MIPS: ralink: Fix platform_get_irq's error checking MIPS: Fix CPS SMP NS16550 UART defaults MIPS: BCM47XX Avoid compile error with MIPS allnoconfig MIPS: RB532: Avoid undefined mac_pton without GENERIC_NET_UTILS MIPS: RB532: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE MIPS: ath25: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE MIPS: AR7: ensure the port type's FCR value is used
-
Christian Borntraeger authored
The new firmware interfaces for branch prediction behaviour changes are transparently available for the guest. Nevertheless, there is new state attached that should be migrated and properly resetted. Provide a mechanism for handling reset, migration and VSIE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [Changed capability number to 152. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcRadim Krčmář authored
Add PPC KVM ioctl to report vulnerability and workaround status to userspace.
-
- 19 Jan, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "One fix for SAS attached SATA CD-ROMs. It turns out that the libata handling of CD devices relies on the SCSI error handler, so disable async aborts (which don't start the error handler) for these devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Disable asynchronous aborts for SATA devices
-