This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:

I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.

- Anup documents the Broadcom Stingray binding, common clocks, adds initial
  support for the Stingray DTSI and DTS files and adds support for the PL022,
  PL330 and SP805

- Sandeep adds the clock nodes to the Stingray Device Tree nodes

- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes

- Oza adds I2C Device Tree nodes to the Stingray DTSes

- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC

- Ravijeta adds support for the USB Dual Role PHY on Northstar 2

- Gerd starts adding references to the sdhost and sdhci controllers, and then
  switches the sdcard to to use the SDHOST (faster than SDHCI)

- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
  thermal driver to work correctly

* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: Add USB DRD PHY device tree node
  ARM64: dts: bcm2837: Define CPU thermal coefficients
  arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
  arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
  arm64: dts: Add I2C DT nodes for Stingray SoC
  arm64: dts: Add GPIO DT nodes for Stingray SOC
  arm64: dts: Add pinctrl DT nodes for Stingray SOC
  arm64: dts: Add NAND DT nodes for Stingray SOC
  arm64: dts: Add clock DT nodes for Stingray SOC
  arm64: dts: Initial DTS files for Broadcom Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  dt-bindings: bcm: Add Broadcom Stingray bindings document
  ARM: dts: bcm283x: switch from &sdhci to &sdhost
  arm64: dts: bcm2837: add &sdhci and &sdhost
  ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
  ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

UniPhier ARM64 SoC DT updates for v4.13

- specify timing delay properties of eMMC
- fix W=1 build warnings
- increase memory reserve size
- use SPDX License Identifier
- add new board support (LD11/LD20 global)

* tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add support for LD20 Global board
  arm64: dts: uniphier: add support for LD11 Global board
  arm64: dts: uniphier: use SPDX-License-Identifier
  arm64: dts: uniphier: reserve more memory for LD11/LD20
  arm64: dts: uniphier: fix simple-bus unit address format error
  arm64: dts: uniphier: Use - instead of @ for DT OPP entries
  arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
  arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
Signed-off-by: Olof Johansson <olof@lixom.net>

Add device tree nodes for
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description

mt6797:
- add basic SoC support
- add clock driver
- add power domain

dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796

* tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
  dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
  arm64: dts: mt8173: Fix mdp device tree
  dt-bindings: i2c: Add Mediatek MT2701 i2c binding
  dt-bindings: i2c-mtk: Add mt7623 binding
  dt-bindings: i2c-mtk: Delete bindings
  dt-bindings: i2c-mt6577: Rename file to reflect bindings
  dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
  arm64: dts: mediatek: add clk and scp nodes for MT6797
  dt-bindings: mediatek: add MT6797 power dt-bindings
  arm64: dts: mediatek: add mt6797 support
  dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
  arm64: dts: mt8173: move clock from phy node into port nodes
  arm64: dts: mt8173: split usb SuperSpeed port into two ports
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Samsung DeviceTree ARM64 update for v4.13:
1. Remove unneeded TE interrupt gpio property.

* tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.

* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: update common rk3399 operating points
  arm64: dts: rockchip: introduce rk3399-op1 operating points
  arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
  arm64: dts: rockchip: add ethernet0 alias on rk3399
  arm64: dts: rockchip: bring rk3399-firefly power-tree in line
  arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
  arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
  arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
  arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
  arm64: dts: rockchip: add some missing qos nodes on rk3399
  arm64: dts: rockchip: add support for firefly-rk3399 board
  dt-bindings: add firefly-rk3399 board support
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request brings in the switch to sdhost for MMC on RPi3
(improving storage performance and leaving sdhci for wireless), and
the correct CPU thermal coefficients.

The thermal changes required a merge from bcm2835-dt-next, where the
nodes were added.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Add initial device tree support for LD20 Global board.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add initial device tree support for LD11 Global board.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds device tree node for USB Dual Role Device PHY for
Broadcom's Northstar2 SoC.
Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This defines the bcm2837 SoC specific thermal coefficients in
order to initialize the thermal driver correctly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Eduardo Valentin <edubezval@gmail.com>

This merge brings in the cpu-thermal node we in bcm283x that we need
in order to set the rpi3's coefficients.

This adds dt-binding documentation for MediaTek MT7622 SoC
which currently only includes basic items such as ARM CPU,
MediaTek SYSIRQ and UART.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

If the mdp_* nodes are under an mdp sub-node, their corresponding
platform device does not automatically get its iommu assigned properly.

Fix this by moving the mdp component nodes up a level such that they are
siblings of mdp and all other SoC subsystems.  This also simplifies the
device tree.

Although it fixes iommu assignment issue, it also break compatibility
with old device tree. So, the patch in driver is needed to iterate over
sibling mdp device nodes, not child ones, to keep driver work properly.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add MT2701 i2c binding to i2c-mt6577.txt and there is no need to
modify i2c driver.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The mt7623 dtsi has support for the i2c block, but this is not documented.
Add the documentation for SoC mt7623 to de description.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>

The bindings file list bindings for mt1827 and mt8135 but
these bindings are not supported by the driver. Remove the bindings.
Also do some minor style changes to the compatible documentation
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>

The i2c-mt6577.txt actually holds the bindings for all mediatek supported i2c
controller. Change the name to i2c.mtk.txt to reflect that.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>

Follow the recent trend for the license description, and fix the wrongly
stated X11 to MIT.

The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses.  The MIT license text [2] is actually what the
current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlSigned-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Reserve enough space below the kernel base.
The assumed address map is:
  80000000 - 80ffffff : for IPP
  81000000 - 81ffffff : for ARM secure
  82000000 -          : for Linux
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The Stingray SoC has two instances of SDHCI controller
and one instance of iProc PWM.

Let's enable above mentioned devices in Stingray DT.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

We have two instance of PL022 SPI controllers, one instance of
DMA PL330, and one non-secure SP805 Watchdog on Stingray SOC.

This patch adds DT nodes for the above mentioned devices in
Stingray DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This patch adds I2C DT nodes on Stingray SoC.
Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The GPIOs on Stingray SOC are based on iProc GPIOs hence
using this we add GPIO DT nodes for Stingray SOC.
Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This patch adds pinctrl and pinmux related DT nodes for
Stingray SOC.

For manageability, pinctrl and pinmum DT nodes are added
as separate DTSi file and included in main DTSi file.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This patch adds NAND controller DT Node and NAND chip DT
node for Stingray SOC and Stingray reference boards.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The Broadcom Stingray SoC is a new member in Broadcom iProc
SoC family.

This patch adds initial DTS files for Broadcom Stingray SoC
and two of its reference boards (bcm958742k and bcm958742t).

We have lot of reference boards and large number of devices
in Broadcom Stingray SoC so eventually we will have quite
a few DTS files for Stingray. To tackle, we have added a
separate directory for Stingray DTS files.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Update iproc clock dt-binding documentation with
Stingray pll and clock details.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Compiling the UniPhier DT files with W=1, DTC warns like follows:

Warning (simple_bus_reg): Node /soc/smpctrl@59800000 simple-bus unit address format error, expected "59801000"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds DT bindings info for Broadcom Stingray SOC
and related reference boards.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Realtek ARM64 based SoC DT for v4.12

This adds an initial DT for the RTD1295 SoC and a TV box based on it.

* tag 'realtek-arm64-dt-for-4.12' of git://github.com/afaerber/linux:
  ARM64: dts: Add Realtek RTD1295 and Zidoo X9S
  dt-bindings: arm: Add Realtek RTD1295 bindings
  dt-bindings: Add vendor prefix for Zidoo
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Renesas ARM64 Based SoC DT Updates for v4.13

* Add support for R-Car H3 ES2.0
* Break out common board support
* Set drive-strength for ravb pins for r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable HDMI outputs on r8a7795/salvator-x
* Add R-Car audio to DT of r8a7796 SoC
* Add current sense amplifiers to DT of r8a779[56]/salvator-x
* Enable NFS-root on r8a7796/salvator-x
* Enable HS200 for eMMC on r8a779[56]/salvator-x,
  r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable EthernetAVB, I2C r8a7796/m3ulcb
* Update memory node to 2 GiB map on r8a7796/m3ulcb

* tag 'renesas-arm64-dt-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (35 commits)
  arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0
  arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
  arm64: dts: ulcb: Set drive-strength for ravb pins
  arm64: dts: renesas: r8a7795-salvator-x: Enable HDMI outputs
  arm64: dts: renesas: r8a7795-salvator-x: Add DU external dot clocks
  arm64: dts: renesas: salvator-x: Add HDMI output connectors
  arm64: dts: renesas: salvator-x: Add DU external dot clock sources
  arm64: dts: renesas: r8a7795: Add HDMI encoder support
  arm64: dts: salvator-x: Add panel backlight support
  arm64: dts: r8a7796: Add PWM device nodes
  arm64: dts: r8a7796: add Sound MIX support
  arm64: dts: r8a7796: add Sound CTU support
  arm64: dts: r8a7796: add Sound DVC support
  arm64: dts: r8a7796: add Sound SRC support
  arm64: dts: r8a7796: add Sound SSI DMA support
  arm64: dts: r8a7796: add Sound SSI PIO support
  arm64: dts: r8a7796: add AUDIO_DMAC support
  arm64: dts: salvator-x: Add current sense amplifiers
  arm64: dts: renesas: Extract common ULCB board support
  arm64: dts: renesas: Extract common Salvator-X board support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

All SoCs supported up to now rely on the fallback binding of mt6577.
Fix the binding description to reflect this.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

The rk3399 has multiple variants with different frequency ratings.
The operating points currently in the kernel stem from the op1 variant
used in Gru ChromeOS devices and may not be suitable for general rk3399
chips. Therefore bring it back to the official general operating points.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The OP1 is a rk3399 variant used in ChromeOS devices with a slightly
higher frequency rating compared to the regular rk3399, but right now
the only available operating points don't match either variant
with both needing adjustments to actually fit their specs.

Therefore introduce separate operting points, from the ChromeOS kernel,
for the OP1 and use it on Gru devices.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This allows basic usage of usb3 devices but no typec specific things yet.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This is used by bootloaders to override the mac address in the devicetree
if needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The power-tree on the rk3399-firefly did not completely match the
documentation and vendor devicetree. It was also missing some
supply-hirarchy information and some regulator-gpio names did not
match the schematics. Fix this for the existing regulators before
introducing new things.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch adds sdmmc, sdio, emmc nodes for Rockchip RK3328 SoCs.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>