- 28 Nov, 2017 37 commits
-
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-X boards equipped with other SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-X boards equipped with other SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-X boards equipped with other SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Add a device node for the ROHM BD9571MWV PMIC. This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Enable the r8a7795 device nodes for IPMMU-VI0, IPMMU-VP1, IPMMU-DS0, IPMMU-DS1 and the shared IPMMU-MM device. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Enable the r8a7795 ES1.x device node for IPMMU-MP1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Add IPMMU-HC to the SATA device node. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Add IPMMU-DS0 to the Ethernet-AVB device node. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPVI devices to allow use of VSPI with IPMMU-VP. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPVI devices to allow use of VSPI with IPMMU-VP0 and IPMMU-VP1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPVB devices to allow use of VSPBC/VSPBD with IPMMU-VP0 and IPMMU-VP1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VP0. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VP. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPVD devices to allow use of the VSP and DU together with IPMMU-VI0. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up the FCPVD devices to allow use of the VSP and DU together with IPMMU-VI1 and IPMMU-VI1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up r8a7795 ES2.0 Audio-DMAC nodes to the IPMMU-MP0. Hook up r8a7795 ES1.x Audio-DMAC nodes to the IPMMU-MP1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up r8a7795 SYS-DMAC nodes to the IPMMUs. In particular SYS-DMAC0 gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Add r8a7795 ES1.x IPMMU nodes and keep all disabled by default. This is a follow-up to a patch that adds IPMMU device nodes that are common to r8a7795 ES1.x and ES2.0 Power domains are omitted as they appear to be undocumented. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Add r8a7795 IPMMU nodes and keep all disabled by default. This includes all IPMMU devices for r8a7795 ES2.0. Those not present in r8a7795 ES1.x are removed from the DT for those SoCs using delete-node. A follow-up patch will add IPMMU devices to ES1.x which are not also present in ES2.0. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
R-Car D3 has only one SDHI controller. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Ulrich Hecht authored
Differs from other Gen3 SoCs in that each controller only supports eight channels. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
ULCB-KF has a USB2.0 dual-role channel (CN13). This adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB) as "otg". Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
This supports USB2 PHY channel #0 on ULCB Kingfisher board The dedicated USB0_PWEN pin is used to control CN13 VBUS source from U43 power supply. MAX3355 can also provide VBUS, hence it should be disabled via OTG_OFFVBUSn node coming from gpio expander TCA9539. Set MAX3355 enabled using OTG_EXTLPn node to be able to read OTG ID of CN13. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Enable the r8a7795 device nodes for IPMMU-DS0, IPMMU-DS1, IPMMU-MP, IPMMU-VI0, IPMMU-VC0 and the shared IPMMU-MM device. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Simon Horman authored
Add IPMMU-DS0 to the Ethernet-AVB device node. Based on work by Magnus Damm for the r8a7795. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Simon Horman authored
Hook up the FCPVI devices to allow use of VSPI with IPMMU-VC0. Based on work for the r8a7795 by Magnus Damm. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Simon Horman authored
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VI0. Based on work by Magnus Damm for the r8a7795. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Simon Horman authored
Hook up r8a7796 Audio-DMAC nodes to the IPMMU-MP. Based on work for the r8a7795 by Magnus Damm. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Hook up r8a7796 DMAC nodes to the IPMMUs. In particular SYS-DMAC0 gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Magnus Damm authored
Add r8a7796 IPMMU nodes and keep all disabled by default. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Geert Uytterhoeven authored
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version) development board equipped with an R-Car M3-W SiP. Based on work for the Salvator-X and -XS boards with M3-W resp. H3 SiPs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Enable the Watchdog Timer (WDT) controller on the Renesas Eagle board equipped with an R-Car V3M (r8a77970) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Add a device node for the Watchdog Timer (WDT) controller on the Renesas R-Car V3M (r8a77970) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Use newly added R-Car SDHI Gen3 fallback compat string in the DT of the r8a7796 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Use newly added R-Car SDHI Gen3 fallback compat string in the DT of the r8a7795 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Wolfram Sang authored
These boards are known to have eMMC issues with the default driver type. Specify a working one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- 27 Nov, 2017 1 commit
-
-
Linus Torvalds authored
-
- 26 Nov, 2017 2 commits
-
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - LPAE fixes for kernel-readonly regions - Fix for get_user_pages_fast on LPAE systems - avoid tying decompressor to a particular platform if DEBUG_LL is enabled - BUG if we attempt to return to userspace but the to-be-restored PSR value keeps us in privileged mode (defeating an issue that ftracetest found) * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: BUG if jumping to usermode address in kernel mode ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE ARM: 8721/1: mm: dump: check hardware RO bit for LPAE ARM: make decompressor debug output user selectable ARM: fix get_user_pages_fast
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
-