- 13 Mar, 2017 22 commits
-
-
Gao Feng authored
There are two duplicated loops codes which used to select right address in current codes. Now eliminate these codes by creating one new function in_dev_select_addr. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== sctp: add receiver-side procedures for stream reconf asoc reset and add streams and response Patch 2/7, 4/7, 5/7, 6/7 are to implement the process of asoc reset request, add streams requests and all kinds of responses. Patch 1/7 and 3/7 are ahead of 2/7 and 4/7 to add two event notification for asoc reset and add streams. Patch 7/7 is the last patch for implementing rfc6525 sctp stream reconf to add sysctl and sockopt interface for users to enable sctp stream reconf. After this patchset, sctp stream reconf will be able to work as rfc6525. v1->v2: - put these into a smaller group. - rename the titles of the commits and improve some changelogs. - improve sctp_chunk_lookup_strreset_param and reuse it in patch 4/7. - process addstrm outreq as the ack of in addstrm inreq if strreset_chunk is not NULL in patch 4/7. - remove the stream alloc when sending addstrm inreq, and the process in peer will response it by sending a addstrm out request back in patch 5/7. - adjust the process of addstrm in resp to fit in the codes that only alloc streams through addstrm outreq in patch 6/7. ==================== Signed-off-by: -
Xin Long authored
This patchset is to add SCTP_RECONFIG_SUPPORTED sockopt, it would set and get asoc reconf_enable value when asoc_id is set, or it would set and get ep reconf_enalbe value if asoc_id is 0. It is also to add sysctl interface for users to set the default value for reconf_enable. After this patch, stream reconf will work. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to implement Receiver-Side Procedures for the Re-configuration Response Parameter in rfc6525 section 5.2.7. sctp_process_strreset_resp would process the response for any kind of reconf request, and the stream reconf is applied only when the response result is success. Signed-off-by:
-
Xin Long authored
This patch is to implement Receiver-Side Procedures for the Add Incoming Streams Request Parameter described in rfc6525 section 5.2.6. It is also to fix that it shouldn't have add streams when sending addstrm in request, as the process in peer will handle it by sending a addstrm out request back. Signed-off-by:
-
Xin Long authored
This patch is to add Receiver-Side Procedures for the Add Outgoing Streams Request Parameter described in section 5.2.5. It is also to improve sctp_chunk_lookup_strreset_param, so that it can be used for processing addstrm_out request. Signed-off-by:
-
Xin Long authored
This patch is to add Stream Change Event described in rfc6525 section 6.1.3. Signed-off-by:
-
Xin Long authored
This patch is to implement Receiver-Side Procedures for the SSN/TSN Reset Request Parameter described in rfc6525 section 6.2.4. The process is kind of complicate, it's wonth having some comments from section 6.2.4 in the codes. Signed-off-by:
-
Xin Long authored
This patch is to add Association Reset Event described in rfc6525 section 6.1.2. Signed-off-by:
-
VSR Burru authored
Optimize DMA in NUMA systems by allocating memory from NUMA node that NIC is plugged in to; DMA will no longer cross NUMA nodes. If NIC IRQs are pinned to a local CPU, that CPU's access to the DMA'd data is also optimized. Signed-off-by:
VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
-
David S. Miller authored
Stephen Hemminger says: ==================== netvsc: fix module removal hangs A couple of patches are necessary to make netvsc driver module removable again. ==================== Signed-off-by: -
stephen hemminger authored
The code in netvsc_device_remove was incorrectly calling napi_disable repeatedly on the same element. This would cause attempts to remove netvsc module to hang. Fixes: 2506b1dc4bbe ("netvsc: implement NAPI") Signed-off-by:Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
stephen hemminger authored
Since rndis_halt_device waits until all outstanding sends and receives are completed. Netvsc device needs to still schedule NAPI to see those completions. Fixes: 2506b1dc4bbe ("netvsc: implement NAPI") Signed-off-by: -
git://git.freescale.com/ppc/upstream/linuxDavid S. Miller authored
Madalin Bucur says: ==================== QorIQ DPAA 1 updates This patch set introduces a series of fixes and features to the DPAA 1 drivers. Besides activating hardware Rx checksum offloading, four traffic classes are added for Tx traffic prioritisation. changes from v1: added patch to enable context-A stashing ==================== Signed-off-by: -
subashab@codeaurora.org authored
While running a single stream UDPv6 test, we observed that amount of CPU spent in NET_RX softirq was much greater than UDPv4 for an equivalent receive rate. The test here was run on an ARM64 based Android system. On further analysis with perf, we found that UDPv6 was spending significant time in the statistics netfilter targets which did socket lookup per packet. These statistics rules perform a lookup when there is no socket associated with the skb. Since there are multiple instances of these rules based on UID, there will be equal number of lookups per skb. By introducing early demux for UDPv6, we avoid the redundant lookups. This also helped to improve the performance (800Mbps -> 870Mbps) on a CPU limited system in a single stream UDPv6 receive test with 1450 byte sized datagrams using iperf. v1->v2: Use IPv6 cookie to validate dst instead of 0 as suggested by Eric Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Jiri Kosina authored
The original reason [1] for having hidden qdiscs (potential scalability issues in qdisc_match_from_root() with single linked list in case of large amount of qdiscs) has been invalidated by 59cc1f61 ("net: sched: convert qdisc linked list to hashtable"). This allows us for bringing more clarity and determinism into the dump by making default pfifo qdiscs visible. We're not turning this on by default though, at it was deemed [2] too intrusive / unnecessary change of default behavior towards userspace. Instead, TCA_DUMP_INVISIBLE netlink attribute is introduced, which allows applications to request complete qdisc hierarchy dump, including the ones that have always been implicit/invisible. Singleton noop_qdisc stays invisible, as teaching the whole infrastructure about singletons would require quite some surgery with very little gain (seeing no qdisc or seeing noop qdisc in the dump is probably setting the same user expectation). [1] http://lkml.kernel.org/r/1460732328.10638.74.camel@edumazet-glaptop3.roam.corp.google.com [2] http://lkml.kernel.org/r/20161021.105935.1907696543877061916.davem@davemloft.netSigned-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Tested-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
-
- 10 Mar, 2017 18 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== ipv4: fib: FIB notifications cleanup Ido says: The first patch moves the core FIB notification code to a separate file, so that code related to FIB rules is placed in fib_rules.c and not fib_trie.c. The reason for the change will become even more apparent in follow-up patchset where we extend the FIB rules notifications. Second patch removes a redundant argument. ==================== Signed-off-by: -
Ido Schimmel authored
We always pass the same event type to fib_notify() and fib_rules_notify(), so we can safely drop this argument. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
Most of the code concerned with the FIB notification chain currently resides in fib_trie.c, but this isn't really appropriate, as the FIB notification chain is also used for FIB rules. Therefore, it makes sense to move the common FIB notification code to a separate file and have it export the relevant functions, which can be invoked by its different users (e.g., fib_trie.c, fib_rules.c). Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Preparations for VRF offload Ido says: This patchset aims to prepare the mlxsw driver for VRF offload. The follow-up patchsets that introduce VRF support can be found here: https://github.com/idosch/linux/tree/idosch-next The first four patches are mainly concerned with the netdevice notification block. There are no functional changes, but merely restructuring to more easily integrate VRF enslavement. Patches 5-10 remove various assumptions throughout the code about a single virtual router (VR) and also restructure the internal data structures to more accurately represent the device's operation. ==================== Signed-off-by:
-
Ido Schimmel authored
When the abort mechanism is invoked it binds the first virtual router (VR) to an LPM tree and inserts a default route to direct packets to the CPU. With VRFs, we can have router interfaces (RIFs) bound to multiple VRs, so we need to make sure packets are trapped from all VRs and not just the first one. Upon abort invocation, bind all active VRs to the same LPM tree and insert a default route in each. Signed-off-by:
-
Ido Schimmel authored
Up until now we implicitly associated all the router interfaces (RIFs) with the first virtual router (VR). This must be changed in order to enable VRF offload. Otherwise, a packet received via a VRF slave would do a FIB lookup in the same table used by other VRFs. Instead, bind the RIF to a VR according to the table where FIB lookup should be performed for packets received via the RIF. Currently, we only care about the MAIN and LOCAL tables (which we squash together). Signed-off-by:
-
Ido Schimmel authored
A virtual router (VR) is an entity within the device to which routing tables and interfaces can be bound to. It can be used to implement VRFs. In the initial implementation we associated the VR with a specific protocol (e.g., IPv4) and an LPM tree. However, this isn't really accurate, as the same VR can be used for both IPv4 and IPv6 traffic, by binding a different LPM tree to a {VR, Proto} pair. This patch aims to restructure the VR code according to the above logic, so that VRs are more accurately represented by the driver's data structures. The main motivation behind this change is to prepare the driver for VRF offload. Signed-off-by: -
Ido Schimmel authored
When looking for a new LPM tree we should always consider all the unused trees. It doesn't matter if the new tree is required due to changes in currently used prefixes inside an existing routing table or because a route was inserted into an empty table. Both cases are functionally identical and therefore should be treated the same. When looking for a new LPM tree, consider all unused trees and don't reserve trees for specific cases. Signed-off-by:
-
Ido Schimmel authored
The inetaddr notification block is currently implemented in the main driver file, but this isn't really appropriate, as it mainly creates and destroys router interfaces (RIFs) which belong with the rest of the router code. This will become even more apparent later on when we'll need to bind these RIFs to virtual routers according to the VRF's table. Structure the driver better and prevent unnecessary function exports by moving the RIF related code with the rest of the router code. Signed-off-by:
-
Ido Schimmel authored
Allow 'unreachable', 'blackhole' and 'prohibit' route types to be programmed into the device by sending any packet hitting them to the CPU. This is needed so that users will be able to program a default route into the VRF's table, thereby preventing lookup from leaking to other tables. Audit the code paths to make sure we don't rely on the presence of a nexthop netdev, as it doesn't exist for above mentioned route types. Signed-off-by:
-
Ido Schimmel authored
We only use the RIF reference count to determine when the last IP address was removed, but instead we can just test 'in_dev->ifa_list'. Signed-off-by:
-
Ido Schimmel authored
When a VLAN device is configured on top of a LAG device (f.e., bond0.10), a vPort is created on top of each of the LAG's slaves and its 'dev' pointer is set to the VLAN device. This is in contrast to the implicit PVID vPort (representing 'bond0'), whose 'dev' pointer keeps pointing to the port netdev itself (f.e., 'sw1p1'). Make both cases consistent by setting their 'dev' pointer to the actual netdev they represent. Either the LAG device itself (in the case of the PVID vPort) or the VLAN device on top of it. This will later allow us to more easily understand for which netdev we should create the router interface (RIF) upon enslavement to a VRF master. Signed-off-by:
-
Ido Schimmel authored
When an upper device is configured on top of a vPort we make sure it's a bridge master during PRECHANGEUPPER and fail otherwise. Therefore, when CHANGEUPPER is later received we don't bother checking the upper's type. Make the code more extendable in preparation for VRF uppers, by checking the upper's type. Signed-off-by:
-
Ido Schimmel authored
We're going to allow bridges stacked on top of port netdevs to be enslaved to a VRF, but for now, only VLAN uppers of the VLAN-aware bridge are supported. Sanitize any other bridge upper. This is consistent with the way we sanitize port netdevs' uppers. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum: Add support for VLAN offload for cls_flower This patchset adds support to offload VLAN modify TC action and adds support to offload cls_flower rules that include VID and PCP matching. ==================== Signed-off-by: -
Petr Machata authored
Introduce MLXSW_AFK_ELEMENT_VID, PCP and declare them in afk_element infos that contain them. Use the elements when VLAD ID or priority are used in the flow. Also add MLXSW_AFK_ELEMENT_VID, PCP to mlxsw_sp_acl_tcam_pattern_ipv4. Both items are included in mlxsw_sp_afk_element_info_l2_dmac, resp. _smac, and both MLXSW_AFK_ELEMENT_SMAC and _DMAC are already in the pattern. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
-
Petr Machata authored
Add VLAN action offloading. Invoke it from Spectrum flower handler for "vlan modify" actions. Signed-off-by:
-
Alexey Kodanev authored
The functions that are returning tcp sequence number also setup TS offset value, so rename them to better describe their purpose. No functional changes in this patch. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
