- 04 Dec, 2017 40 commits
-
-
Leo (Sunpeng) Li authored
For better readability. Signed-off-by:
Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
The GTT manager handles the GART address space anyway, so it is completely pointless to keep the same information around twice. v2: rebased Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Christian König authored
Rename amdgpu_gtt_mgr_is_allocated() to amdgpu_gtt_mgr_has_gart_addr() and use that instead. v2: rename the function as well. Signed-off-by:
-
Monk Liu authored
Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Acked-by:
-
Monk Liu authored
for SR-IOV when doing gpu reset this routine shouldn't do resource allocating otherwise memory leak Signed-off-by:
-
Monk Liu authored
1,no sriov check since gpu recover is unified 2,need CPU_ACCESS_REQUIRED flag for VRAM if SRIOV because otherwise after following PIN the first allocated VRAM bo is wasted due to some TTM mgr reason. Signed-off-by:
-
Monk Liu authored
since now gpu reset is unified with gpu_recover for both bare-metal and SR-IOV: 1)rename in_sriov_reset to in_gpu_reset 2)move lock_reset from adev->virt to adev Signed-off-by:
-
Monk Liu authored
1,new imple names amdgpu_gpu_recover which gives more hint on what it does compared with gpu_reset 2,gpu_recover unify bare-metal and SR-IOV, only the asic reset part is implemented differently 3,gpu_recover will increase hang job karma and mark its entity/context as guilty if exceeds limit V2: 4,in scheduler main routine the job from guilty context will be immedialy fake signaled after it poped from queue and its fence be set with "-ECANCELED" error 5,in scheduler recovery routine all jobs from the guilty entity would be dropped 6,in run_job() routine the real IB submission would be skipped if @skip parameter equales true or there was VRAM lost occured. V3: 7,replace deprecated gpu reset, use new gpu recover Signed-off-by:
-
Monk Liu authored
jobs are skipped under two cases 1)when the entity behind this job marked guilty, the job poped from this entity's queue will be dropped in sched_main loop. 2)in job_recovery(), skip the scheduling job if its karma detected above limit, and also skipped as well for other jobs sharing the same fence context. this approach is becuase job_recovery() cannot access job->entity due to entity may already dead. v2: some logic fix v3: when entity detected guilty, don't drop the job in the poping stage, instead set its fence error as -ECANCELED in run_job(), skip the scheduling either:1) fence->error < 0 or 2) there was a VRAM LOST occurred on this job. this way we can unify the job skipping logic. with this feature we can introduce new gpu recover feature. Signed-off-by:
-
Christian König authored
That was somehow completely of. Signed-off-by:
-
Leo (Sunpeng) Li authored
This is a follow-up patch to: Leo (Sunpeng) Li Cleanup code that enables freesync We should only add a stream to freesync if a modeset was requested, so we don't fill the core freesync map with pointless streams. Signed-off-by:
-
Leo (Sunpeng) Li authored
This is a follow-up patch to: Bhawanpreet Lakha Atomic freesync ASSERT fix Changes: - Combine to use one iterator - Use new DRM iterators. Signed-off-by:
-
Bhawanpreet Lakha authored
Changes to atomic set property for freesync. Now In set property, just set the freesync variables and return 0. Based on the variables call mod_freesync_set_user_enable() inside commit_tail Signed-off-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Alex Deucher authored
We don't currently expose variable refresh rate, but add the state to the connector state to make it easier to maintain the support for it from a hw support perspective while we figure out the uapi for drm. Reviewed-by:
-
Anthony Koo authored
Update the programming sequence to allow DMCU firmware to be loaded by PSP. This code detects whether the firmware is loaded and does a check to verify the expected interface version and checks for correct response from micro controller. Added registry key method to allow force loading of firmware from kernel mode driver for test purposes. This is old method of firmware loading without PSP. Moved some init sequences into dc/dmcu. Changed loading sequence to initialize IRAM after firmware completely loaded. Firmware will now disable features that use IRAM until initialized. Signed-off-by:
Anthony Koo <anthony.koo@amd.com> Reviewed-by:
-
Yongqiang Sun authored
In case of pipe split, cursor position should also be programmed as per cursor address. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Harry Wentland authored
C++ compilers don't like the implicit conversion Signed-off-by:
-
Yue Hin Lau authored
removing duplicate functions, renaming struct mi_regs, etc. Signed-off-by:
Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by:
-
Harry Wentland authored
Remove defines we no longer need Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Mikita Lipski authored
Registers added to definition list that are required for multi display synchronization Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
-
Yongqiang Sun authored
Program cursor attributes during set mode is only needed in case of pipe slipt, bottom pipe should be programmed same as top pipe. Need to program if address is 0. Signed-off-by:
-
Yongqiang Sun authored
Moved lock and unlock to apply_ctx_to_surface, since all the front end programming is within apply_ctx_to_surface. Signed-off-by:
-
Anthony Koo authored
Some features should only be enabled on APUs or should not be enabled on APUs. Signed-off-by:
-
Rex Zhu authored
the variable ref_clock was assigned same value twice in same function. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
Reviewed-by:
-
Rex Zhu authored
Used to set up smu power logging. Reviewed-by:
-
Rex Zhu authored
Used to set up smu power logging. Reviewed-by:
-
Rex Zhu authored
move powerplay and amdgpu shared structures and definitions to kgd_pp_interface.h. This is the interface between the base driver and powerplay. Acked-by:
-
Rex Zhu authored
Clean up the interface. Acked-by:
-
Rex Zhu authored
those functions are exported to DC Reviewed-by:
-
Rex Zhu authored
Move the display/power interfaces to one place. Reviewed-by:
-
Christian König authored
We always use the BO mem now. v2: minor rebase Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Christian König authored
Display can't seem to handle this correctly. Signed-off-by:
-
Christian König authored
We need to test if any domain fits, not all of them. Signed-off-by:
-
Christian König authored
We always need to bind pinned BOs, not just when the caller requested the address. Signed-off-by:
-
Christian König authored
This allows us to specify multiple possible placements again. Signed-off-by:
-
pding authored
The exclusive mode has real-time limitation in reality, such like being done in 300ms. It's easy observed if running many VF/VMs in single host with heavy CPU workload. If we find the init fails due to exclusive mode timeout, try it again. v2: - rewrite the condition for readable value. v3: - fix typo, add comments for sleep Acked-by:
pding <Pixel.Ding@amd.com> Signed-off-by:
-
pding authored
Reviewed-by:
-
Evan Quan authored
Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
