Include originally "late" updates for OMAP and Qualcomm,
now that it's not late any more.

* arm/late: (122 commits)
  ARM: OMAP2+: Drop legacy platform data for ti81xx edma
  ARM: dts: Configure interconnect target module for ti816x edma
  ARM: dts: Configure interconnect target module for dm814x tptc3
  ARM: dts: Configure interconnect target module for dm814x tptc2
  ARM: dts: Configure interconnect target module for dm814x tptc1
  ARM: dts: Configure interconnect target module for dm814x tptc0
  ARM: dts: Configure interconnect target module for dm814x tpcc
  ARM: OMAP2+: Drop legacy platform data for dm814x cpsw
  ARM: dts: Configure interconnect target module for dm814x cpsw
  clk: ti: Fix dm814x clkctrl for ethernet
  arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
  arm64: dts: sdm845: add IPA information
  arm64: dts: qcom: db845c: add analog audio support
  arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
  arm64: dts: qcom: c630: Enable audio support
  arm64: dts: qcom: sdm845: add apr nodes
  arm64: dts: qcom: sdm845: add slimbus nodes
  arm64: dts: qcom: sc7180: Update reg names for SDHC
  arm64: dts: qcom: qcs404: Enable CQE support for eMMC
  arm64: dts: msm8916: Add fastrpc node
  ...

I renamed the dsi-nodes from dsi@ to dsi-controller@
so that the schema check would kick in, but missed to
rename it in a few places.

Link: https://lore.kernel.org/r/20200326222536.86441-1-linus.walleij@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/late

Qualcomm ARM64 DT updates for v5.7

This brings initial support for the SM8250 and IPQ6018 platforms.

SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect
providers are refactored. The Lenovo Yoga C630 has audio enabled and the
DB845c has PCIe, analog audio and low-speed interfaces enabled. The
SDM845 MTP has its display enabled and firmware location updated to
match linux-firmware.

SC7180 gains CPU topology and power properties. Interconnect providers,
eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added.
Critical trip points are added as well as various fixes.

For MSM8916 FastRPC support is added, ETM power management and reserved
memory for Samsung A2015 are corrected.

MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998
temporarily disables part of Coresight to boot without
clk_ignore_unused.  CEQ for eMMC on QCS404 is enabled.

Fixes throughout the platforms to fix binding compliance, correct
compatibles for SDHCI nodes and add gpio-ranges.

* tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (56 commits)
  arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
  arm64: dts: sdm845: add IPA information
  arm64: dts: qcom: db845c: add analog audio support
  arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
  arm64: dts: qcom: c630: Enable audio support
  arm64: dts: qcom: sdm845: add apr nodes
  arm64: dts: qcom: sdm845: add slimbus nodes
  arm64: dts: qcom: sc7180: Update reg names for SDHC
  arm64: dts: qcom: qcs404: Enable CQE support for eMMC
  arm64: dts: msm8916: Add fastrpc node
  arm64: dts: qcom: sm8250: Add sm8250 dts file
  arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5
  arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes
  arm64: dts: qcom: apq8016-sbc: Remove wrong regulator supply
  arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node
  arm64: dts: qcom: msm8998: Fix cpu compatible
  arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider
  arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider
  arm64: dts: sc7180: Add interconnect provider DT nodes
  arm64: dts: qcom: msm8996: Use generic QMP driver for UFS
  ...

Link: https://lore.kernel.org/r/20200318043823.GA470201@yogaSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Drop remaining legacy platform data for cpsw and edma

With a non-critical clock fix for dm814x ethernet, we can update ti81xx
for cpsw ethernet and edma to probe them with ti-sysc interconnect
target module driver and device tree data. And we can drop the related
remaining platform data for cpsw and edma.

* tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Drop legacy platform data for ti81xx edma
  ARM: dts: Configure interconnect target module for ti816x edma
  ARM: dts: Configure interconnect target module for dm814x tptc3
  ARM: dts: Configure interconnect target module for dm814x tptc2
  ARM: dts: Configure interconnect target module for dm814x tptc1
  ARM: dts: Configure interconnect target module for dm814x tptc0
  ARM: dts: Configure interconnect target module for dm814x tpcc
  ARM: OMAP2+: Drop legacy platform data for dm814x cpsw
  ARM: dts: Configure interconnect target module for dm814x cpsw
  clk: ti: Fix dm814x clkctrl for ethernet

Link: https://lore.kernel.org/r/pull-1584575307-189595@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Drop legacy platform data for omaps for v5.7

This series of changes continues dropping legacy platform data for
omaps by updating devices to probe with ti-sysc interconnect target
module driver:

- Update omap4, omap5, am437x, and dra7 display subsystem (DSS)
  to probe with device tree data only

- Update am335x, am437x and dra7 to probe EDMA to probe with
  device tree data only

- Drop legacy platform data for am335x and am437x PRUSS as the
  current code just keeps the devices in reset

- Drop legacy platform data for omap4 DSP and IPU as the current
  code just keeps the devices in reset

- Configure am437x and dra7 PRU-ICSS to probe with device tree
  data

For the dropped omap4 DSP and IPU platform data, there will be patches
coming later on to configure the accelerators using the omap remoteproc
bindings so hopefully folks can actually use these devices eventually.

* tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits)
  ARM: OMAP2+: Drop legacy platform data for dra7 edma
  ARM: OMAP2+: Drop legacy platform data for am3 and am4 edma
  ARM: dts: Configure interconnect target module for dra7 tptc1
  ARM: dts: Configure interconnect target module for dra7 tptc0
  ARM: dts: Configure interconnect target module for dra7 tpcc
  ARM: dts: Configure interconnect target module for am4 tptc2
  ARM: dts: Configure interconnect target module for am4 tptc1
  ARM: dts: Configure interconnect target module for am4 tptc0
  ARM: dts: Configure interconnect target module for am4 tpcc
  ARM: dts: Configure interconnect target module for am3 tptc2
  ARM: dts: Configure interconnect target module for am3 tptc1
  ARM: dts: Configure interconnect target module for am3 tptc0
  ARM: dts: Configure interconnect target module for am3 tpcc
  ARM: dts: dra7: Add PRU-ICSS interconnect target-module nodes
  ARM: dts: AM4372: Add the PRU-ICSS interconnect target-module node
  ARM: dts: AM33xx-l4: Update PRUSS interconnect target-module node
  ARM: OMAP2+: Drop legacy platform data for am437x DSS
  ARM: OMAP2+: Drop legacy platform data for dra7 DSS
  ARM: OMAP2+: Drop legacy platform data for omap5 DSS
  ARM: OMAP2+: Drop legacy platform data for omap4 dss
  ...

Link: https://lore.kernel.org/r/pull-1583858385-416921@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

I accidentally merged this after requesting a different solution,
reverting now.

Link: https://patchwork.kernel.org/patch/11431397/
Fixes: 2cedfe12 ("arm64: dts: specify console via command line")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Rob sees little point in maintaining the Calxeda architecture (early ARM
32-bit server) anymore.
Since I have a machine sitting under my desk, change the maintainership
to not lose support for that platform.

Link: https://lore.kernel.org/r/20200228135106.220620-6-andre.przywara@arm.comSigned-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

For proper bindings checks we need to properly group the port-phys and
sgpio-gpio items, so that they match the expected number of items.

Link: https://lore.kernel.org/r/20200228135106.220620-5-andre.przywara@arm.comSigned-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Currently multiple interrupts for some devices are written as one array
instead of using the DT grouping notation (<0 42 4>, <0 23 4>).
This ends up in the same binary representation in the .dtb, but is
semantically not equivalent. The yaml schema checks will stumble over
this, so lets fix that first.

I refrained from using the symbolic names for GIC_SPI/GIC_PPI and
IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the
original DTS files and the mainline versions, so it's just additional
churn.

Link: https://lore.kernel.org/r/20200228135106.220620-4-andre.przywara@arm.comSigned-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The PL011 UART binding requires two clocks to be named in a node.
Add the second clock, which is the bus gate, that just gets enabled.
Since this is a fixed clock anyway, it doesn't make any difference.

Link: https://lore.kernel.org/r/20200228135106.220620-3-andre.przywara@arm.comSigned-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The .dts files for the Calxeda machines are quite old, so carry some
sloppy mistakes that the DT schema checker will complain about.

Fix those issues, they should not have any effect on functionality.

Link: https://lore.kernel.org/r/20200228135106.220620-2-andre.przywara@arm.comSigned-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM dts updates for v5.7

This adds Bluetooth support on Nexus 5, USB on Xperia Z1 and defines
gpio-ranges throughout the various gpio-controllers.

* tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: add gpio-ranges property
  ARM: dts: qcom: msm8974-hammerhead: add support for bluetooth
  ARM: dts: qcom: msm8974: add blsp2_uart10
  ARM: dts: qcom: msm8974-honami: Add USB node.

Link: https://lore.kernel.org/r/20200318044305.GE470201@yogaSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.7, part 2
- Add ptp_ref clock to ethernet nodes for Arria10

* tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes

Link: https://lore.kernel.org/r/20200325160745.793-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.7 (round 2)
- G12[ab]: add SPI support, enable on odroid-n2

* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  arm64: dts: meson-g12: add the SPIFC nodes
  arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width
  arm64: dts: meson-g12-common: add spicc controller nodes
  dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs
  dt-bindings: clk: meson: add the gxl internal dac gate

Link: https://lore.kernel.org/r/7hftdyhfq4.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 5.7

 - Enable watchdog on sam9x60
 - Correct sama5d4/2 RTC compatibles
 - Add i2c gpio pinctrl to allow i2c recovery

* tag 'at91-5.7-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: at91: sama5d2: add i2c gpio pinctrl
  ARM: dts: at91: sama5d4: add i2c gpio pinctrl
  ARM: dts: at91: sama5d3: add i2c gpio pinctrl
  ARM: dts: at91: sama5d4: use correct rtc compatible
  ARM: dts: at91: sama5d2: use correct rtc compatible
  ARM: dts: at91: sam9x60ek: enable watchdog node
  ARM: dts: at91: sam9x60: add watchdog node
  ARM: dts: at91: Kill off "simple-panel" compatibles

Link: https://lore.kernel.org/r/20200322085931.GA208770@piout.netSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Gemini DTS changes for v5.7:
- Rename the IDE nodes to match the YAML schema
- Add a temperature zone to the DIR-685, use hard drive
  as sensor and cool the case using the fan.

* tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes

Link: https://lore.kernel.org/r/CACRpkdbvgqCVuoMCHJrCZ0J+3NrwdrBnwBz+BJrSE=hqYh2j+Q@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

- Rename scpsys nodes to power-controller.
- Add PWM node to MT7629 SoC

* tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  ARM: dts: mediatek: add mt7629 pwm support
  ARM: dts: mediatek: rename scpsys nodes to power-controller

Link: https://lore.kernel.org/r/b454c6b2-656e-2261-7688-f7f2773189cf@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt2712:
- add real time clock node

mt8173:
- mark arch timer invalid in suspend

mt8183:
- add CPU idle states
- add watchdog node
- add dynamic power coefficient and cooling cells for all CPUs

mt8516:
- add basic support for the SoC
- add basic support for the pumpkin board

* tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: add RTC nodes for MT2712
  arm64: dts: mediatek: add pumpkin board dts
  arm64: dts: mediatek: add dtsi for MT8516
  arm64: dts: mt8183: Add #cooling-cells to CPU nodes
  arm64: dts: mt8183: add/update dynamic power coefficients
  arm64: dts: mediatek: rename scpsys nodes to power-controller
  amr64: dts: mt8183: Add watchdog node
  arm64: dts: mt8173: add arm,no-tick-in-suspend in timer
  arm64: dts: mt8183: Enable CPU idle-states

Link: https://lore.kernel.org/r/c512b5cb-e639-1429-64db-9c1a53378c49@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for v5.7

- Add missing clocks to dwc3 nodes on am65x (fixes USB)
- Add DMA entries for main_spi0 on am65x
- Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet
  support)
- Add DMA entries for ADC for both am65x and j721e
- Add MCU system control module on j721e (needed by phy-gmii-sel)

* tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes

Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.7
- Increase NAND boot partition for Arria10
- Increase QSPI partition for Stratix10 and Agilex

* tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: increase the QSPI reg address for Stratix10 and Agilex
  ARM: dts: socfpga: arria10: Increase boot partition size for NAND

Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 DTS update for 5.7:

 - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
 - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
 - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
 - Add SNVS clock description to pwrkey device for i.MX8 SoCs.
 - A number of updates on librem5-devkit board to add audio, proximity
   sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
   devices as well.
 - A series of patches from Anson Huang to update i.MX8 EVK boards
   for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
 - Add PCIe device nodes for LX2160A and LS1028A SoC.
 - Add FSPI deivce support for LX2160A evaluation boards.
 - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
 - Other small and random updates on LS1028A and i.MX8 support.

* tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
  arm64: dts: ls1028a: disable the felix switch by default
  arm64: dts: imx8mp: Add snvs clock to powerkey
  arm64: dts: imx8mn: Add snvs clock to powerkey
  arm64: dts: ls1028a: Add PCIe controller DT nodes
  arm64: dts: ls1028a: sl28: add support for variant 2
  arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
  arm64: dts: ls1028a: sl28: fix on-board EEPROMS
  arm64: dts: freescale: sl28: add SPI flash
  arm64: dts: imx8m: fix aips dts node
  arm64: dts: imx8mn: Add CPU thermal zone support
  arm64: dts: imx8mm: Add thermal zone support
  arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
  arm64: dts: enable fspi in imx8mm dts
  arm64: dts: imx8mn: align name for crypto child nodes
  arm64: dts: lx2160aqds: Add FSPI node properties
  arm64: dts: lx2160ardb: Update FSPI node properties
  arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
  arm64: dts: layerscape: add iommu-map property to pci nodes
  arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
  arm64: dts: imx8mp-evk: Add i2c3 support
  ...

Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX arm DTS changes for 5.7:

 - New support for i.MX6/7 based PICO devices and Toradex i.MX7 based
   Aster boards.
 - Add voltage monitor device node for vf610-zii boards.
 - Improve UART pins macro defines for i.MX6SX SoC and switch related
   boards to use the new names.
 - Use generic node name for devices like GPT, KPP, CCM, WDOG, OCOTP and
   IOMUXC in i.MX DTS files.
 - Switch imx6ul-pico device tree to DRM bindings.
 - Use SPDX-License-Identifier for all Toradex i.MX6/7 based boards.
 - Add proper rgmii PHY description for imx6dl-riotboard and
   imx6q-marsboard.
 - Add capture-subsystem device support for i.MX51.
 - Kill off "simple-panel" compatibles which has never been an accepted
   as an upstream compatible string.
 - Random device addition to various boards.

* tag 'imx-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
  ARM: dts: imx6q-marsboard: properly define rgmii PHY
  ARM: dts: imx6dl-riotboard: properly define rgmii PHY
  ARM: dts: imx51-zii-rdu1: set name prefix for TPA6130A2
  ARM: dts: imx6: RDU2: assign video PLL as input to LDB
  ARM: dts: vf: toradex: SPDX tags and copyright cleanup
  ARM: dts: imx7: toradex: use SPDX-License-Identifier
  ARM: dts: imx6: toradex: use SPDX-License-Identifier
  ARM: dts: imx51: add capture-subsystem device
  ARM: dts: imx: add nvmem property for cpu0
  ARM: dts: imx6qdl: Add imx6qdl-pico support
  ARM: dts: imx6ul-pico: Add support for the dwarf baseboard
  ARM: dts: imx7d-pico: Add support for the nymph baseboard
  ARM: dts: imx7d-pico: Add support for the dwarf baseboard
  ARM: dts: imx23: introduce mmc0_sck_cfg
  ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7
  ARM: dts: imx: align name for crypto node and child nodes
  ARM: dts: imx6qdl-gw5910: add CC1352 UART
  ARM: dts: imx6qdl-sr-som-ti: indicate powering off wifi is safe
  ARM: dts: imx6: phycore-som: add da9062 gpio support
  ARM: dts: imx6: phycore-som: explicit disable pmic watchdog during suspend
  ...

Link: https://lore.kernel.org/r/20200318051918.32579-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.7:

 - Add compatibles for TechNexion i.MX6/7, Kontron LS1028A, Toradex i.MX7,
   NXP i.MX8MP EVK, and LS1028A evaluation boards.
 - Improve NXP crypto binding examples to use generic node name.

* tag 'imx-bindings-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add TechNexion boards
  dt-bindings: crypto: caam: use generic node name
  dt-bindings: crypto: dcp: use generic node name
  dt-bindings: crypto: sahara: use generic node name
  dt-bindings: arm: fsl: add nxp based toradex colibri-imx7 bindings
  dt-bindings: arm: imx: Add the i.MX8MP EVK board
  dt-bindings: arm: fsl: add Kontron sl28 boards
  dt-bindings: arm: fsl: add LS1028A based boards

Link: https://lore.kernel.org/r/20200318051918.32579-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM64 SoC DT updates for v5.7

- Rename nodes to avoid dt-schema warnings

- Enable SPI for PXs3 reference board

- Enable thermal monitor for PXs3 SoC

- Fix clock and reset of SPI nodes

* tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: Set SCSSI clock and reset IDs for each channel
  arm64: dts: uniphier: Add nodes of thermal monitor and thermal zone for PXs3
  arm64: dts: uniphier: Enable spi node for PXs3 reference board
  arm64: dts: uniphier: rename NAND node names to follow json-schema
  arm64: dts: uniphier: rename aidet node names to follow json-schema
  arm64: dts: uniphier: change SD/eMMC node names to follow json-schema

Link: https://lore.kernel.org/r/CAK7LNASMD-zqNfG02WhU1LeAJevnjBv=oT2N_7y6C8w7kryotQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM SoC DT updates for v5.7

- Rename nodes to avoid dt-schema warnings

- Add a generic compatible to EEPROM so that it matches OF table

- Add USB controller nodes to Pro5 SoC

- Fix clock and reset of SPI nodes

* tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: Set SCSSI clock and reset IDs for each channel
  ARM: dts: uniphier: Add USB3 controller nodes for Pro5
  ARM: dts: uniphier: Add one more generic compatible string for I2C EEPROM
  ARM: dts: uniphier: rename cache controller nodes to follow json-schema
  ARM: dts: uniphier: rename NAND node names to follow json-schema
  ARM: dts: uniphier: rename aidet node names to follow json-schema
  ARM: dts: uniphier: change SD/eMMC node names to follow json-schema

Link: https://lore.kernel.org/r/CAK7LNAQ-AOTyqpV1E_S-hksjqexHfVauwGV9rrfDvjRVnu8-UQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.7
 - sound, bluetooth, thermal updates
 - A1: add secure power domain nodes
 - misc. cleanups

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add thermal zones to meson gx devices
  arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi
  arm64: dts: meson-g12b: fix N2/VIM3 audio card model names
  arm64: dts: meson-gxbb-vega-s95: fix bluetooth node
  arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes
  arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap
  arm64: dts: meson: fix gxm-khadas-vim2 wifi
  arm64: dts: meson: sei510: fix sound card codec node
  arm64: dts: meson: s400: fix sound card codec nodes
  arm64: dts: meson: add pdm reset line
  arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
  arm64: dts: amlogic: add rc-videostrong-kii-pro keymap
  arm64: dts: meson: a1: add secure power domain controller

Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Support for the rk3399-based Pinebook Pro, eDP support and power-tree for
the rk3399 evaluation board, a big number of fixes for issues found by
checking against the new yaml dt-bindings.
And on the smaller side, fixes for network transfers, the mute gpio
on rk3328 gets actually described and one lvds fix on the px30 and
the rk3399-hugsun board gets IR and power led.

* tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
  arm64: dts: rockchip: Add Hugsun X99 power led
  arm64: dts: rockchip: Add Hugsun X99 IR receiver
  arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes
  arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
  arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator
  arm64: dts: add bus to rockchip amba nodenames
  arm64: dts: rockchip: replace clock-freq-min-max by max-frequency
  arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma
  arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB
  arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30
  arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99
  arm64: dts: rockchip: fix compatible property for rk3399-evb
  arm64: dts: rockchip: Add initial support for Pinebook Pro
  dt-bindings: Add doc for Pine64 Pinebook Pro
  arm64: dts: rockchip: Enable eDP display on rk3399 evb
  arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb
  arm64: dts: rockchip: Add pmic dt tree for rk3399 evb
  arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb
  arm64: dts: rockchip: fix px30 lvds ports
  arm64: dts: rockchip: Add txpbl node for RK3399/RK3328
  ...

Link: https://lore.kernel.org/r/27799037.pT45f1LVdF@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Improvements for the rk3288-vyasa board and a lot of cleanups from
verifying devicetrees against new yaml bindings.

* tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits)
  ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodes
  ARM: dts: rockchip: swap clocks and clock-names values for i2s nodes
  ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodes
  ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
  ARM: dts: rockchip: swap clocks and clock-names values for spdif nodes
  ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot
  ARM: dts: rockchip: remove clock-frequency from saradc node rv1108
  ARM: dts: rockchip: fix vref-supply for &saradc node rk3288 firefly reload
  ARM: dts: rockchip: use DMA channels for UARTs for RK3288
  ARM: dts: rockchip: rk3xxx: fix L2 cache-controller nodename
  ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc
  ARM: dts: add bus to rockchip amba nodenames
  ARM: dts: rockchip: remove #dma-cells from dma client nodes for rv1108
  ARM: dts: rockchip: fix rockchip,default-sample-phase property names
  ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc
  dt-bindings: arm: add Rockchip rk3036-evb board
  dt-bindings: arm: fix Rockchip Kylin board bindings
  ARM: dts: rockchip: add missing model properties
  ARM: dts: rockchip: Add vcc50_hdmi for rk3288-vyasa
  ARM: dts: rockchip: Fix ddc-i2c-bus for rk3288-vyasa
  ...

Link: https://lore.kernel.org/r/7846023.TtVhTo4ACP@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung DTS ARM changes for v5.7

1. Various fixes:
 - Reboot of some Odroid Exynos4412-based boards,
 - MMC regulators on Arndale5250,
 - Memory mapping on Artik5,
 - GPU power domain on Exynos542x boards,
 - LCD SPI polarity on UniversalC210,
2. Add thermal cooling of GPU on Odroid XU3/XU4 family,
3. Add dynamic-power-coefficient to Exynos5422 for energy model.

* tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Fix polarity of the LCD SPI bus on UniversalC210 board
  ARM: dts: exynos: Fix G3D power domain supply on Arndale Octa boards
  ARM: dts: exynos: Fix G3D power domain supply on Odroid XU3/XU4/HC1 boards
  ARM: dts: exynos: Fix memory on Artik5 evaluation boards
  ARM: dts: exynos: Make fixed regulators always-on on Arndale5250
  ARM: dts: exynos: Fix MMC regulator on Arndale5250 board
  ARM: dts: exynos: Add dynamic-power-coefficient to Exynos5422 CPUs
  ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1
  ARM: dts: exynos: Fix broken reboot on some Odroid U2/X2/U3 boards

Link: https://lore.kernel.org/r/20200316175652.5604-3-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS updates for the v5.7 kernel:
- Fix some DSI nodes
- Add GT-S7710 DTS file

* tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: Add devicetree for Samsung GT-S7710
  ARM: dts: ux500: Fix up DSI controller nodes

Link: https://lore.kernel.org/r/CACRpkdb8T9CZYvYEFYnQTOMoXGsn43N8TgKfvoJZjTwRHW6zhQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt64 for 5.7 (part 1)

Improve network support on two Armada 8040 based board:
Clearfog GT 8 and Macchiatobin.

Add ethernet alias on Espressobin for U-Boot support.

Fix various dt compilation issue or warning.

* tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: Fix cpu compatible for AP807-quad
  arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi
  arm64: dts: marvell: build ESPRESSObin variants
  arm64: dts: marvell: espressobin: indicate dts version
  arm64: dts: marvell: espressobin: add ethernet alias
  arm64: dts: mcbin: support 2W SFP modules
  arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay

Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.7-rc1

These changes add support for the XUSB pad controller, as well as the
XUSB controller on Tegra194. Furthermore, USB device mode is supported
across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added
for the Jetson AGX Xavier platform.

Various minor fixes eliminate warnings on boot related to missing power
supplies for some devices.

* tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Add support for PCIe endpoint mode in P2972-0000 platform
  arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194
  arm64: tegra: Add ethernet alias on Jetson TX1
  arm64: tegra: Populate LP8557 backlight regulator
  arm64: tegra: Fix Tegra186 SOR supply
  arm64: tegra: Add EEPROM supplies
  arm64: tegra: Enable I2C controller for EEPROM
  arm64: tegra: smaug: Change clk_out_2 provider to PMC
  arm64: tegra: Add clock-cells property to Tegra PMC node
  arm64: tegra: Enable XUDC node on Jetson Nano
  arm64: tegra: Update OTG port entries for Jetson Nano
  arm64: tegra: Enable XUDC node on Jetson TX2
  arm64: tegra: Add XUDC node for Tegra186
  arm64: tegra: Enable XUDC on Jetson TX1
  arm64: tegra: Add XUDC node for Tegra210
  arm64: tegra: Update OTG port entries for Jetson TX2
  arm64: tegra: Update OTG port entries for Jetson TX1
  arm64: tegra: Enable XUSB host in P2972-0000 board
  arm64: tegra: Add XUSB and pad controller on Tegra194
  arm64: tegra: Fix Tegra194 PCIe compatible string

Link: https://lore.kernel.org/r/20200313165848.2915133-8-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.7-rc1

Minor fixes and additions for 32-bit Tegra SoC device trees.

* tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Update sound node clocks in device tree
  ARM: tegra: Add clock-cells property to PMC
  ARM: tegra: Remove USB 2-0 port from Jetson TK1 padctl

Link: https://lore.kernel.org/r/20200313165848.2915133-6-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.7-rc1

New IDs are added for clocks that are controlled by the PMC. This
replaces older IDs that were erroneously provided by the clock and reset
controller.

This also adds device tree bindings for XUSB pad controller support on
Tegra194 as well as USB role switching on NVIDIA Tegra SoCs.

* tag 'tegra-for-5.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
  dt-bindings: phy: tegra-xusb: Add usb-role-switch
  dt-bindings: phy: tegra: Add Tegra194 support
  dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
  dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
  dt-bindings: tegra: Convert Tegra PMC bindings to YAML
  dt-bindings: clock: tegra: Add IDs for OSC clocks

Link: https://lore.kernel.org/r/20200313165848.2915133-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.3, round 1

Highlights:
----------

 - Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier
   board. It is based on stm32mp157c SoC.
 - Add OTG full support on stm32mp15.
 - Fix issues seen during yaml validation on stpmic and stmfx.
 - Add i2c power/wakeup support on stm32mp15.
 - Add card detect on sdcard on stm32mp boards

* tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits)
  ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards
  ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards
  ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards
  ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards
  ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1
  ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x
  ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c
  ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1
  ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
  ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
  ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards
  ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1
  ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board
  ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board
  ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151
  ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1
  ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
  ARM: dts: stm32: add USB OTG full support on stm32mp151
  ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node
  ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board
  ...

Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.7

  - Document support for the M3ULCB board with R-Car M3-W+.

* tag 'renesas-dt-bindings-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: arm: renesas: Add M3ULCB with R-Car M3-W+

Link: https://lore.kernel.org/r/20200313154304.1636-4-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM64 DT updates for v5.7 (take two)

  - Thermal support for R-Car M3-W+,
  - Support for the M3ULCB board with R-Car M3-W+,
  - CPUIdle support for R-Car M3-N and E3,
  - Display support for the HiHope RZ/G2M board,
  - A minor fix.

* tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
  arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores
  arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores
  arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address
  arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+
  arm64: dts: renesas: r8a77961: Add thermal nodes

Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.7 (take two)

  - LCD/touchscreen support for the iwg22d-sodimm board.

* tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: iwg22d-sodimm: Enable touchscreen
  ARM: dts: iwg22d-sodimm: Enable LCD panel

Link: https://lore.kernel.org/r/20200313154304.1636-2-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner Device Tree Changes for v5.7

A fairly large set of changes for v5.7, including some new devices.

SoC specific changes:

  - SPI on H6 SoC enabled
  - Thermal sensor on R40 SoC enabled
  - Deinterlace core hardware on A64 SoC enabled
  - Redundant assigned-clocks properties removed
    - required clock rates are now enforced by drivers
  - LVDS panel support on A20 SoC enabled
  - PMU compatible fixed for H5 and H6 SoCs
  - Thermal trip points added for A83T and H5 SoCs
  - (Image) Rotation core hardware on A83T and A64 SoCs enabled

Device specific changes:

  - Pine64 PineTab and PinePhone added
  - Various cleanups and improvements for Pine64 PineBook
  - GPIO pin bank regulator supplies added for A64-OlinXino
  - eMMC enabled on Orange Pi 3
  - PocketBook Touch Lux 3 added
  - Linutronix Testbox v2 added
  - Ethernet enabled on Orange Pi One Plus
  - HDMI enabled on H6-based Orange Pi boards

* tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits)
  arm64: dts: allwinner: a64: add node for rotation core
  ARM: dts: sun8i: a83t: Add device node for rotation core
  arm64: dts: allwinner: a64: Fix display clock register range
  ARM: dts: sunxi: Fix DE2 clocks register range
  arm64: dts: allwinner: h6: orangepi: Enable HDMI
  arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet
  arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
  arm64: dts: allwinner: Add initial support for Pine64 PinePhone
  dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings
  arm64: dts: sun50i-a64: Add i2c2 pins
  ARM: dts: sunxi: h3/h5: add r_pwm node
  arm64: allwinner: a64: enable LCD-related hardware for Pinebook
  ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps
  ARM: dts: sun8i-h3: Add thermal trip points/cooling maps
  arm64: dts: allwinner: h6: Fix PMU compatible
  arm64: dts: allwinner: h5: Fix PMU compatible
  ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode
  arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator
  ARM: dts: sun5i: Add PocketBook Touch Lux 3 support
  dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3
  ...

Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.7, please pull the following:

- Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS

- Nicolas moves the eMMC2 controller into its separate node in order for
  platform firmware to perform the necessary "dma-ranges" property
  patching based on the chip revision since the eMMC controller has
  different addressing constraints.

- Florian convers a whole bunch of Broadcom boards bindings from text to
  YAML.

* tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux:
  dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg'
  dt-bindings: arm: bcm: Convert Vulcan to YAML
  dt-bindings: arm: bcm: Convert BCM11351 to YAML
  dt-bindings: arm: bcm: Convert BCM4708 to YAML
  dt-bindings: arm: bcm: Convert BCM23550 to YAML
  dt-bindings: arm: bcm: Convert BCM21664 to YAML
  dt-bindings: arm: bcm: Convert Stingray to YAML
  dt-bindings: arm: bcm: Convert Northstar 2 to YAML
  dt-bindings: arm: bcm: Convert Northstar Plus to YAML
  dt-bindings: arm: bcm: Convert Hurricane 2 to YAML
  dt-bindings: arm: bcm: Convert Cygnus to YAML
  ARM: dts: bcm2711: Move emmc2 into its own bus
  ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels

Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>