1. 31 May, 2019 5 commits
  2. 30 May, 2019 35 commits
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · 7b3ed2a1
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      100GbE Intel Wired LAN Driver Updates 2019-05-30
      
      This series contains updates to ice driver only.
      
      Brett continues his work with interrupt handling by fixing an issue
      where were writing to the incorrect register to disable all VF
      interrupts.
      
      Tony consolidates the unicast and multicast MAC filters into a single
      new function.
      
      Anirudh adds support for virtual channel vector mapping to receive and
      transmit queues.  This uses a bitmap to associate indicated queues with
      the specified vector.  Makes several cosmetic code cleanups, as well as
      update the driver to align with the current specification for managing
      MAC operation codes (opcodes).
      
      Paul adds support for Forward Error Correction (FEC) and also adds the
      ethtool get and set handlers to modify FEC parameters.
      
      Bruce cleans up the driver code to fix a number of issues, such as,
      reducing the scope of some local variables, reduce the number of
      de-references by changing a local variable and reorder the code to
      remove unnecessary "goto's".
      
      Dave adds switch rules to be able to handle LLDP packets and in the
      process, fix a couple of issues found, like stop treating DCBx state of
      "not started" as an error and stop hard coding the filter information
      flag to transmit.
      
      Jacob updates the driver to allow for more granular debugging by
      developers by using a distinct separate bit for dumping firmware logs.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7b3ed2a1
    • Kevin 'ldir' Darbyshire-Bryant's avatar
      net: sched: act_ctinfo: minor size optimisation · 84a32ede
      Kevin 'ldir' Darbyshire-Bryant authored
      Since the new parameter block is initialised to 0 by kzmalloc we don't
      need to mask & clear unused operational mode bits, they are already
      unset.
      
      Drop the pointless code.
      Signed-off-by: default avatarKevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84a32ede
    • David S. Miller's avatar
      Merge branch 'complex-c45-phys' · 655887fe
      David S. Miller authored
      Heiner Kallweit says:
      
      ====================
      net: phy: improve handling of more complex C45 PHY's
      
      This series tries to address few problematic aspects raised by
      Russell. Concrete example is the Marvell 88x3310, the changes
      should be helpful for other complex C45 PHY's too.
      
      v2:
      - added patch enabling interrupts also if phylib state machine
        isn't started
      - removed patch dealing with the double link status read
        This one needs little bit more thinking and will go separately.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      655887fe
    • Heiner Kallweit's avatar
      net: phy: export phy_queue_state_machine · 97b33bdf
      Heiner Kallweit authored
      We face the issue that link change interrupt and link status may be
      reported by different PHY layers. As a result the link change
      interrupt may occur before the link status changes.
      Export phy_queue_state_machine to allow PHY drivers to specify a
      delay between link status change interrupt and link status check.
      
      v2:
      - change jiffies parameter type to unsigned long
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Suggested-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      97b33bdf
    • Heiner Kallweit's avatar
      net: phy: add callback for custom interrupt handler to struct phy_driver · 49644e68
      Heiner Kallweit authored
      The phylib interrupt handler handles link change events only currently.
      However PHY drivers may want to use other interrupt sources too,
      e.g. to report temperature monitoring events. Therefore add a callback
      to struct phy_driver allowing PHY drivers to implement a custom
      interrupt handler.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Suggested-by: default avatarRussell King - ARM Linux admin <linux@armlinux.org.uk>
      Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49644e68
    • Heiner Kallweit's avatar
      net: phy: enable interrupts when PHY is attached already · 07b09289
      Heiner Kallweit authored
      This patch is a step towards allowing PHY drivers to handle more
      interrupt sources than just link change. E.g. several PHY's have
      built-in temperature monitoring and can raise an interrupt if a
      temperature threshold is exceeded. We may be interested in such
      interrupts also if the phylib state machine isn't started.
      Therefore move enabling interrupts to phy_request_interrupt().
      
      v2:
      - patch added to series
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07b09289
    • Michal Kalderon's avatar
      qed: Fix static checker warning · 8e2ea3ea
      Michal Kalderon authored
      In some cases abs_ppfid could be printed without being initialized.
      
      Fixes: 79284ade ("qed: Add llh ppfid interface and 100g support for offload protocols")
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarMichal Kalderon <michal.kalderon@marvell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8e2ea3ea
    • Ioana Ciornei's avatar
      net: dsa: Add error path handling in dsa_tree_setup() · e70c7aad
      Ioana Ciornei authored
      In case a call to dsa_tree_setup() fails, an attempt to cleanup is made
      by calling dsa_tree_remove_switch(), which should take care of
      removing/unregistering any resources previously allocated. This does not
      happen because it is conditioned by dst->setup being true, which is set
      only after _all_ setup steps were performed successfully.
      
      This is especially interesting when the internal MDIO bus is registered
      but afterwards, a port setup fails and the mdiobus_unregister() is never
      called. This leads to a BUG_ON() complaining about the fact that it's
      trying to free an MDIO bus that's still registered.
      
      Add proper error handling in all functions branching from
      dsa_tree_setup().
      Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
      Reported-by: default avatarkernel test robot <rong.a.chen@intel.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e70c7aad
    • David S. Miller's avatar
      Merge branch 'r8169-fw' · 1b0b807d
      David S. Miller authored
      Heiner Kallweit says:
      
      ====================
      r8169: decouple firmware handling code from actual driver code
      
      These two patches are a step towards eventually factoring out firmware
      handling code to a separate source file.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1b0b807d
    • Heiner Kallweit's avatar
      r8169: decouple rtl_phy_write_fw from actual driver code · ce8843ab
      Heiner Kallweit authored
      This patch is a further step towards decoupling firmware handling from
      the actual driver code. Firmware can be for PHY and/or MAC, and two
      pairs of read/write functions are needed for handling PHY firmware and
      MAC firmware respectively. Pass these functions via struct rtl_fw and
      avoid the ugly switching of mdio_ops behind the back of rtl_writephy().
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce8843ab
    • Heiner Kallweit's avatar
      r8169: improve rtl_fw_format_ok · e95a7f30
      Heiner Kallweit authored
      Simplify the function a little bit and use strscpy() where appropriate.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e95a7f30
    • Heiner Kallweit's avatar
      r8169: enable WoL speed down on more chip versions · 25e94115
      Heiner Kallweit authored
      Call the pll power down function also for chip versions 02..06 and
      13..15. The MAC can't be powered down on these chip versions, but at
      least they benefit from the speed-down power-saving if WoL is enabled.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25e94115
    • Matteo Croce's avatar
      sctp: deduplicate identical skb_checksum_ops · c3e933a5
      Matteo Croce authored
      The same skb_checksum_ops struct is defined twice in two different places,
      leading to code duplication. Declare it as a global variable into a common
      header instead of allocating it on the stack on each function call.
      bloat-o-meter reports a slight code shrink.
      
      add/remove: 1/1 grow/shrink: 0/10 up/down: 128/-1282 (-1154)
      Function                                     old     new   delta
      sctp_csum_ops                                  -     128    +128
      crc32c_csum_ops                               16       -     -16
      sctp_rcv                                    6616    6583     -33
      sctp_packet_pack                            4542    4504     -38
      nf_conntrack_sctp_packet                    4980    4926     -54
      execute_masked_set_action                   6453    6389     -64
      tcf_csum_sctp                                575     428    -147
      sctp_gso_segment                            1292    1126    -166
      sctp_csum_check                              579     412    -167
      sctp_snat_handler                            957     772    -185
      sctp_dnat_handler                           1321    1132    -189
      l4proto_manip_pkt                           2536    2313    -223
      Total: Before=359297613, After=359296459, chg -0.00%
      Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarMatteo Croce <mcroce@redhat.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c3e933a5
    • Matteo Croce's avatar
      net: avoid indirect calls in L4 checksum calculation · 2544af03
      Matteo Croce authored
      Commit 283c16a2 ("indirect call wrappers: helpers to speed-up
      indirect calls of builtin") introduces some macros to avoid doing
      indirect calls.
      
      Use these helpers to remove two indirect calls in the L4 checksum
      calculation for devices which don't have hardware support for it.
      
      As a test I generate packets with pktgen out to a dummy interface
      with HW checksumming disabled, to have the checksum calculated in
      every sent packet.
      The packet rate measured with an i7-6700K CPU and a single pktgen
      thread raised from 6143 to 6608 Kpps, an increase by 7.5%
      Suggested-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarMatteo Croce <mcroce@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2544af03
    • YueHaibing's avatar
      net: dsa: sja1105: Make static_config_check_memory_size static · 5ee907f7
      YueHaibing authored
      Fix sparse warning:
      
      drivers/net/dsa/sja1105/sja1105_static_config.c:446:1: warning:
       symbol 'static_config_check_memory_size' was not declared. Should it be static?
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
      Acked-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5ee907f7
    • David S. Miller's avatar
      Merge branch 'connection-tracking-support-for-bridge' · 41384136
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      connection tracking support for bridge
      
      This patchset adds native connection tracking support for the bridge.
      
      Patch #1 and #2 extract code from IPv4/IPv6 fragmentation core and
      introduce the fraglist splitter. That splits a skbuff fraglist into
      independent fragments.
      
      Patch #3 and #4 also extract code from IPv4/IPv6 fragmentation core
      and introduce the skbuff into fragments transformer. This can be used
      by linearized skbuffs (eg. coming from nfqueue and ct helpers) as well
      as cloned skbuffs (that are either seen either with taps or with bridge
      port flooding).
      
      Patch #5 moves the specific IPCB() code from these new fragment
      splitter/transformer APIs into the IPv4 stack. The bridge has a
      different control buffer layout and it starts using this new APIs in
      this patchset.
      
      Patch #6 adds basic infrastructure that allows to register bridge
      conntrack support.
      
      Patch #7 adds bridge conntrack support (only for IPv4 in this patch).
      
      Patch #8 adds IPv6 support for the bridge conntrack support.
      
      Patch #9 registers the IPv4/IPv6 conntrack hooks in case the bridge
      conntrack is used to deal with local traffic, ie. prerouting -> input
      bridge hook path. This cover the bridge interface has a IP address
      scenario.
      
      Before this patchset, only chance for people to do stateful filtering is
      to use the `br_netfilter` emulation layer, that turns bridge frame into
      IPv4/IPv6 packets and inject them into the IPv4/IPv6 hooks. Apparently,
      this module allows users to use iptables and all of its feature-set from
      the bridge, including stateful filtering. However, this approach is
      flawed in many aspects that have been discussed many times. This is a
      step forward to deprecate `br_netfilter'.
      
      v2: Fix English typo in commit message.
      v3: Fix another English typo in commit message.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      41384136
    • Pablo Neira Ayuso's avatar
      netfilter: nf_conntrack_bridge: register inet conntrack for bridge · af9573be
      Pablo Neira Ayuso authored
      This patch enables IPv4 and IPv6 conntrack from the bridge to deal with
      local traffic. Hence, packets that are passed up to the local input path
      are confirmed later on from the {ipv4,ipv6}_confirm() hooks.
      
      For packets leaving the IP stack (ie. output path), fragmentation occurs
      after the inet postrouting hook. Therefore, the bridge local out and
      postrouting bridge hooks see fragments with conntrack objects, which is
      inconsistent. In this case, we could defragment again from the bridge
      output hook, but this is expensive. The recommended filtering spot for
      outgoing locally generated traffic leaving through the bridge interface
      is to use the classic IPv4/IPv6 output hook, which comes earlier.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af9573be
    • Pablo Neira Ayuso's avatar
      netfilter: nf_conntrack_bridge: add support for IPv6 · 764dd163
      Pablo Neira Ayuso authored
      br_defrag() and br_fragment() indirections are added in case that IPv6
      support comes as a module, to avoid pulling innecessary dependencies in.
      
      The new fraglist iterator and fragment transformer APIs are used to
      implement the refragmentation code.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      764dd163
    • Pablo Neira Ayuso's avatar
      netfilter: bridge: add connection tracking system · 3c171f49
      Pablo Neira Ayuso authored
      This patch adds basic connection tracking support for the bridge,
      including initial IPv4 support.
      
      This patch register two hooks to deal with the bridge forwarding path,
      one from the bridge prerouting hook to call nf_conntrack_in(); and
      another from the bridge postrouting hook to confirm the entry.
      
      The conntrack bridge prerouting hook defragments packets before passing
      them to nf_conntrack_in() to look up for an existing entry, otherwise a
      new entry is allocated and it is attached to the skbuff. The conntrack
      bridge postrouting hook confirms new conntrack entries, ie. if this is
      the first packet seen, then it adds the entry to the hashtable and (if
      needed) it refragments the skbuff into the original fragments, leaving
      the geometry as is if possible. Exceptions are linearized skbuffs, eg.
      skbuffs that are passed up to nfqueue and conntrack helpers, as well as
      cloned skbuff for the local delivery (eg. tcpdump), also in case of
      bridge port flooding (cloned skbuff too).
      
      The packet defragmentation is done through the ip_defrag() call.  This
      forces us to save the bridge control buffer, reset the IP control buffer
      area and then restore it after call. This function also bumps the IP
      fragmentation statistics, it would be probably desiderable to have
      independent statistics for the bridge defragmentation/refragmentation.
      The maximum fragment length is stored in the control buffer and it is
      used to refragment the skbuff from the postrouting path.
      
      The new fraglist splitter and fragment transformer APIs are used to
      implement the bridge refragmentation code. The br_ip_fragment() function
      drops the packet in case the maximum fragment size seen is larger than
      the output port MTU.
      
      This patchset follows the principle that conntrack should not drop
      packets, so users can do it through policy via invalid state matching.
      
      Like br_netfilter, there is no refragmentation for packets that are
      passed up for local delivery, ie. prerouting -> input path. There are
      calls to nf_reset() already in several spots in the stack since time ago
      already, eg. af_packet, that show that skbuff fraglist handling from the
      netif_rx path is supported already.
      
      The helpers are called from the postrouting hook, before confirmation,
      from there we may see packet floods to bridge ports. Then, although
      unlikely, this may result in exercising the helpers many times for each
      clone. It would be good to explore how to pass all the packets in a list
      to the conntrack hook to do this handle only once for this case.
      
      Thanks to Florian Westphal for handing me over an initial patchset
      version to add support for conntrack bridge.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c171f49
    • Pablo Neira Ayuso's avatar
      netfilter: nf_conntrack: allow to register bridge support · d035f19f
      Pablo Neira Ayuso authored
      This patch adds infrastructure to register and to unregister bridge
      support for the conntrack module via nf_ct_bridge_register() and
      nf_ct_bridge_unregister().
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d035f19f
    • Pablo Neira Ayuso's avatar
      net: ipv4: place control buffer handling away from fragmentation iterators · 19c3401a
      Pablo Neira Ayuso authored
      Deal with the IPCB() area away from the iterators.
      
      The bridge codebase has its own control buffer layout, move specific
      IP control buffer handling into the IPv4 codepath.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      19c3401a
    • Pablo Neira Ayuso's avatar
      net: ipv6: split skbuff into fragments transformer · 8a6a1f17
      Pablo Neira Ayuso authored
      This patch exposes a new API to refragment a skbuff. This allows you to
      split either a linear skbuff or to force the refragmentation of an
      existing fraglist using a different mtu. The API consists of:
      
      * ip6_frag_init(), that initializes the internal state of the transformer.
      * ip6_frag_next(), that allows you to fetch the next fragment. This function
        internally allocates the skbuff that represents the fragment, it pushes
        the IPv6 header, and it also copies the payload for each fragment.
      
      The ip6_frag_state object stores the internal state of the splitter.
      
      This code has been extracted from ip6_fragment(). Symbols are also
      exported to allow to reuse this iterator from the bridge codepath to
      build its own refragmentation routine by reusing the existing codebase.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a6a1f17
    • Pablo Neira Ayuso's avatar
      net: ipv4: split skbuff into fragments transformer · 065ff79f
      Pablo Neira Ayuso authored
      This patch exposes a new API to refragment a skbuff. This allows you to
      split either a linear skbuff or to force the refragmentation of an
      existing fraglist using a different mtu. The API consists of:
      
      * ip_frag_init(), that initializes the internal state of the transformer.
      * ip_frag_next(), that allows you to fetch the next fragment. This function
        internally allocates the skbuff that represents the fragment, it pushes
        the IPv4 header, and it also copies the payload for each fragment.
      
      The ip_frag_state object stores the internal state of the splitter.
      
      This code has been extracted from ip_do_fragment(). Symbols are also
      exported to allow to reuse this iterator from the bridge codepath to
      build its own refragmentation routine by reusing the existing codebase.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      065ff79f
    • Pablo Neira Ayuso's avatar
      net: ipv6: add skbuff fraglist splitter · 0feca619
      Pablo Neira Ayuso authored
      This patch adds the skbuff fraglist split iterator. This API provides an
      iterator to transform the fraglist into single skbuff objects, it
      consists of:
      
      * ip6_fraglist_init(), that initializes the internal state of the
        fraglist iterator.
      * ip6_fraglist_prepare(), that restores the IPv6 header on the fragment.
      * ip6_fraglist_next(), that retrieves the fragment from the fraglist and
        updates the internal state of the iterator to point to the next
        fragment in the fraglist.
      
      The ip6_fraglist_iter object stores the internal state of the iterator.
      
      This code has been extracted from ip6_fragment(). Symbols are also
      exported to allow to reuse this iterator from the bridge codepath to
      build its own refragmentation routine by reusing the existing codebase.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0feca619
    • Pablo Neira Ayuso's avatar
      net: ipv4: add skbuff fraglist splitter · c8b17be0
      Pablo Neira Ayuso authored
      This patch adds the skbuff fraglist splitter. This API provides an
      iterator to transform the fraglist into single skbuff objects, it
      consists of:
      
      * ip_fraglist_init(), that initializes the internal state of the
        fraglist splitter.
      * ip_fraglist_prepare(), that restores the IPv4 header on the
        fragments.
      * ip_fraglist_next(), that retrieves the fragment from the fraglist and
        it updates the internal state of the splitter to point to the next
        fragment skbuff in the fraglist.
      
      The ip_fraglist_iter object stores the internal state of the iterator.
      
      This code has been extracted from ip_do_fragment(). Symbols are also
      exported to allow to reuse this iterator from the bridge codepath to
      build its own refragmentation routine by reusing the existing codebase.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c8b17be0
    • David S. Miller's avatar
      Merge branch 'add-TFO-backup-key' · d48ecb40
      David S. Miller authored
      Jason Baron says:
      
      ====================
      add TFO backup key
      
      Christoph, Igor, and I have worked on an API that facilitates TFO key
      rotation. This is a follow up to the series that Christoph previously
      posted, with an API that meets both of our use-cases. Here's a
      link to the previous work:
      https://patchwork.ozlabs.org/cover/1013753/
      
      Changes in v2:
        -spelling fixes in ip-sysctl.txt (Jeremy Sowden)
        -re-base to latest net-next
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d48ecb40
    • Jason Baron's avatar
      selftests/net: add TFO key rotation selftest · 10fbcdd1
      Jason Baron authored
      Demonstrate how the primary and backup TFO keys can be rotated while
      minimizing the number of client cookies that are rejected.
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Signed-off-by: default avatarChristoph Paasch <cpaasch@apple.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      10fbcdd1
    • Jason Baron's avatar
      Documentation: ip-sysctl.txt: Document tcp_fastopen_key · 2dc7e48d
      Jason Baron authored
      Add docs for /proc/sys/net/ipv4/tcp_fastopen_key
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Signed-off-by: default avatarChristoph Paasch <cpaasch@apple.com>
      Cc: Jeremy Sowden <jeremy@azazel.net>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2dc7e48d
    • Jason Baron's avatar
      tcp: add support for optional TFO backup key to net.ipv4.tcp_fastopen_key · aa1236cd
      Jason Baron authored
      Add the ability to add a backup TFO key as:
      
      # echo "x-x-x-x,x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
      
      The key before the comma acks as the primary TFO key and the key after the
      comma is the backup TFO key. This change is intended to be backwards
      compatible since if only one key is set, userspace will simply read back
      that single key as follows:
      
      # echo "x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
      # cat /proc/sys/net/ipv4/tcp_fastopen_key
      x-x-x-x
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Signed-off-by: default avatarChristoph Paasch <cpaasch@apple.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa1236cd
    • Jason Baron's avatar
      tcp: add support to TCP_FASTOPEN_KEY for optional backup key · 0f1ce023
      Jason Baron authored
      Add support for get/set of an optional backup key via TCP_FASTOPEN_KEY, in
      addition to the current 'primary' key. The primary key is used to encrypt
      and decrypt TFO cookies, while the backup is only used to decrypt TFO
      cookies. The backup key is used to maximize successful TFO connections when
      TFO keys are rotated.
      
      Currently, TCP_FASTOPEN_KEY allows a single 16-byte primary key to be set.
      This patch now allows a 32-byte value to be set, where the first 16 bytes
      are used as the primary key and the second 16 bytes are used for the backup
      key. Similarly, for getsockopt(), we can receive a 32-byte value as output
      if requested. If a 16-byte value is used to set the primary key via
      TCP_FASTOPEN_KEY, then any previously set backup key will be removed.
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Signed-off-by: default avatarChristoph Paasch <cpaasch@apple.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0f1ce023
    • Jason Baron's avatar
      tcp: add backup TFO key infrastructure · 9092a76d
      Jason Baron authored
      We would like to be able to rotate TFO keys while minimizing the number of
      client cookies that are rejected. Currently, we have only one key which can
      be used to generate and validate cookies, thus if we simply replace this
      key clients can easily have cookies rejected upon rotation.
      
      We propose having the ability to have both a primary key and a backup key.
      The primary key is used to generate as well as to validate cookies.
      The backup is only used to validate cookies. Thus, keys can be rotated as:
      
      1) generate new key
      2) add new key as the backup key
      3) swap the primary and backup key, thus setting the new key as the primary
      
      We don't simply set the new key as the primary key and move the old key to
      the backup slot because the ip may be behind a load balancer and we further
      allow for the fact that all machines behind the load balancer will not be
      updated simultaneously.
      
      We make use of this infrastructure in subsequent patches.
      Suggested-by: default avatarIgor Lubashev <ilubashe@akamai.com>
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Signed-off-by: default avatarChristoph Paasch <cpaasch@apple.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9092a76d
    • Christoph Paasch's avatar
      tcp: introduce __tcp_fastopen_cookie_gen_cipher() · 483642e5
      Christoph Paasch authored
      Restructure __tcp_fastopen_cookie_gen() to take a 'struct crypto_cipher'
      argument and rename it as __tcp_fastopen_cookie_gen_cipher(). Subsequent
      patches will provide different ciphers based on which key is being used for
      the cookie generation.
      Signed-off-by: default avatarChristoph Paasch <cpaasch@apple.com>
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      483642e5
    • David S. Miller's avatar
      Merge branch 'mlxsw-Hardware-monitoring-enhancements' · 5b5d331a
      David S. Miller authored
      Ido Schimmel says:
      
      ====================
      mlxsw: Hardware monitoring enhancements
      
      This patchset from Vadim provides various hardware monitoring related
      improvements for mlxsw.
      
      Patch #1 allows querying firmware version from the switch driver when
      the underlying bus is I2C. This is useful for baseboard management
      controller (BMC) systems that communicate with the ASIC over I2C.
      
      Patch #2 improves driver's performance over I2C by utilizing larger
      transactions sizes, if possible.
      
      Patch #3 re-orders driver's initialization sequence to enforce a
      specific firmware version before new firmware features are utilized.
      This is a prerequisite for patches #4-#6.
      
      Patches #4-#6 expose the temperature of inter-connect devices
      (gearboxes) that are present in Mellanox SN3800 systems and split
      2x50Gb/s lanes to 4x25Gb/s lanes.
      
      Patches #7-#8 reduce the transaction size when reading SFP modules
      temperatures, which is crucial when working over I2C.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5b5d331a
    • Vadim Pasternak's avatar
      mlxsw: core: Reduce buffer size in transactions for SFP modules temperature readout · e4e93d6d
      Vadim Pasternak authored
      Obtain SFP modules temperatures through MTMP register instead of MTBR
      register, because the first one utilizes shorter transaction buffer size
      for request. It improves performance in case low frequency interface
      (I2C) is used for communication with a chip.
      Signed-off-by: default avatarVadim Pasternak <vadimp@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4e93d6d
    • Vadim Pasternak's avatar
      mlxsw: core: Extend the index size for temperature sensors readout · 984aec75
      Vadim Pasternak authored
      Extend sensor index size for Management Temperature Bulk Register
      (MTBR) and Management Temperature Register (MTMP) upto 12 bits in
      order to align registers description with new version of PRM document.
      Add define for base sensor index for SFP modules temperature reading
      for MTMP register.
      Signed-off-by: default avatarVadim Pasternak <vadimp@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      984aec75