- 28 Mar, 2007 4 commits
-
-
Tejun Heo authored
For drive side cable detection to work correctly, drives need to be identified backwards such that the slave device releases PDIAG- before the mater drive tries to detect cable type. ata_bus_probe() was fixed by commit f31f0cc2 but the new EH path wasn't fixed. This patch makes new EH path do IDENTIFY backwards. ata_dev_configure() for new devices are still performed master first. This is to keep the detection messages in forward order. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Conke Hu authored
There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by:Conke Hu <conke.hu@amd.com> Signed-off-by:
-
Jeff Garzik authored
Not yet ready to turn on ATA ACPI by default, for either PATA or SATA. Also, rename the global-scope module parameter variable 'noacpi' to something more libata-specific, reducing the potential for namespace collision. Signed-off-by: -
Zach Brown authored
The user can generate console output if they cause do_mmap() to fail during sys_io_setup(). This was seen in a regression test that does exactly that by spinning calling mmap() until it gets -ENOMEM before calling io_setup(). We don't need this printk at all, just remove it. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 27 Mar, 2007 36 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] gdth: fix oops in gdth_copy_cmd() [SCSI] mptsas: Fix oops for insmod during kexec [SCSI] lpfc: avoid double-free during PCI error failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5472): Isl6421: don't reference freed memory V4L/DVB (5441): Saa7146: Fix allocation of clipping memory V4L/DVB (5421): Fix suspend/resume in msp3400 and tuner V4L/DVB (5415): Msp_attach must return 0 if no msp3400 was found. V4L/DVB (5408): Fix SECAM handling on saa7115 V4L/DVB (5400): Core: fix several locking related problems V4L/DVB (5390): Radio: Fix error in Kbuild file V4L/DVB (5332): Ir_rc5_timer_end decoder lockup fix
-
git://kvm.qumranet.com/home/avi/kvmLinus Torvalds authored
* git://kvm.qumranet.com/home/avi/kvm: KVM: always reload segment selectors KVM: Prevent system selectors leaking into guest on real->protected mode transition on vmx
-
Rafael J. Wysocki authored
This reverts commit 94985134 and insteads removes the WARN_ON() that caused that commit in the first place. The problem is that we call disable_nonboot_cpus() in swsusp before powering down the system in order to avoid triggering the WARN_ON() in arch/x86_64/kernel/acpi/sleep.c:init_low_mapping() and this doesn't work well on Thomas' system. So instead, remove the WARN_ON() in arch/x86_64/kernel/acpi/sleep.c: init_low_mapping(), which triggers every time during the suspend to disk in the platform mode, as the potential problem it is related to doesn't seem to occur in practice. [ I think we might want to disallow the case of multiple users of that mm, or something. Normally, playing with the current process page tables on the current CPU should be fine as long as we don't have other threads using those tables at the same time.. Anyway, not pretty, but better than the warning or the lockup - Linus ] Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Thomas Gleixner authored
The clockevents / tick management code expects an error value, when the event is already expired. hpet_next_event() returns 1 in that case. Fix it to return the proper -ETIME error code. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: Export __splice_from_pipe() 2/2 splice: dont readpage 1/2 splice: dont steal make elv_register() output atomic block: blk_max_pfn is somtimes wrong
-
Mika Kukkonen authored
Without attached patch against current -git I get following with !PROC_SYSCTL (with EMBEDDED and PROC_FS set): CC init/version.o LD init/built-in.o LD vmlinux fs/built-in.o: In function `do_proc_sys_lookup': proc_sysctl.c:(.text+0x26583): undefined reference to `sysctl_head_next' fs/built-in.o: In function `proc_sys_revalidate': proc_sysctl.c:(.text+0x265bb): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_readdir': proc_sysctl.c:(.text+0x26720): undefined reference to `sysctl_head_next' proc_sysctl.c:(.text+0x267d8): undefined reference to `sysctl_head_finish' proc_sysctl.c:(.text+0x268e7): undefined reference to `sysctl_head_next' proc_sysctl.c:(.text+0x26910): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_write': proc_sysctl.c:(.text+0x2695d): undefined reference to `sysctl_perm' proc_sysctl.c:(.text+0x2699c): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_read': proc_sysctl.c:(.text+0x269e9): undefined reference to `sysctl_perm' proc_sysctl.c:(.text+0x26a25): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_permission': proc_sysctl.c:(.text+0x26ad1): undefined reference to `sysctl_perm' proc_sysctl.c:(.text+0x26adb): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_lookup': proc_sysctl.c:(.text+0x26b39): undefined reference to `sysctl_head_finish' make: *** [vmlinux] Virhe 1 All those functions are in fs/proc/proc_sysctl.c, which has no CONFIG_ #define's in it, so the patch makes the compilation of that file to depend on CONFIG_PROC_SYSCTL (the simplest choice). Acked-by:"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Markus Lidel authored
Because i don't have much time lately and my responses are pretty slow it's probably best to remove me from MAINTAINERS to give someone else the chance to jump in. Signed-off-by:
-
Serge E. Hallyn authored
When CONFIG_IPC_NS=n, clone(CLONE_NEWIPC) claims success, but did not actually clone a new IPC namespace. Fix this to return -EINVAL so the caller knows his request was denied. Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Vasily Averin authored
I2O subsystem has been broken in mainstream several months ago (after 2.6.18). Commit 4aff5e23 from Jens Axboe split struct request ->flags into two parts: cmd_type and cmd_flags. In i2o layer this patch has replaced flag REQ_SPECIAL by the according cmd_type. However i2o has used REQ_SPECIAL not as command type but as driver-specific flag for the debug purposes. As result all i2o requests have type "special" now, are not processed to the hardware and fail with I/O error: i2o/hda:<3>Buffer I/O error on device i2o/hda, logical block 0 Buffer I/O error on device i2o/hda, logical block 0 Buffer I/O error on device i2o/hda, logical block 0 unable to read partition table block-osm: device added (TID: 207): i2o/hda The following patch removes the extra debug checks without any drawbacks and restores the normal driver's work. Signed-off-by:
Vasily Averin <vvs@sw.ru> Acked-by:
Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Yoichi Yuasa authored
drivers/pcmcia/au1000_generic.c: In function 'au1x00_pcmcia_socket_probe': drivers/pcmcia/au1000_generic.c:375: error: 'struct device' has no member named 'dev' Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Greg KH <greg@kroah.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Adrian Bunk authored
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:eisa_root_register from .text between 'pci_eisa_init' (at offset 0xabf670) and 'virtual_eisa_release' AFAIK a PCI to EISA bridge isn't anything hotpluggable, so pci_eisa_init() can become __init. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
john stultz authored
I've been seeing some odd NTP behavior recently on a few boxes and finally narrowed it down to time_offset overflowing when converted to SHIFT_UPDATE units (which was a side effect from my HZfreeNTP patch). This patch converts time_offset from a long to a s64 which resolves the issue. [tglx@linutronix.de: signedness fixes] Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jeff Dike authored
This patch uses MAX_REG_NR consistently to refer to the register file size. FRAME_SIZE isn't sufficient because on x86_64, it is smaller than the ptrace register file size. MAX_REG_NR was introduced as a consistent way to get the number of registers, but wasn't used everywhere it should be. When this causes a problem, it makes PTRACE_SETREGS fail on x86_64 because of a corrupted segment register value in the known-good register file. The patch also adds a register dump at that point in case there are any future problems here. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: <stable@kernel.org> Signed-off-by:
-
Jeff Dike authored
During a static link, ld has started putting a .note section in the .uml.setup.init section. This has the result that the UML setups begin with 32 bytes of garbage and UML crashes immediately on boot. This patch creates a specific .note section for ld to drop this stuff into. Signed-off-by:
-
Adrian Bunk authored
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:spi_register_master from .text between 'spi_bitbang_start' (at offset 0x84e11a) and 'bitbang_work' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:spi_alloc_master from .text between 'butterfly_attach' (at offset 0x84e681) and 'at25_remove' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:spi_new_device from .text between 'butterfly_attach' (at offset 0x84e7e4) and 'at25_remove' Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Serge E. Hallyn authored
When CONFIG_UTS_NS=n, clone(CLONE_NEWUTS) quietly refuses. So correctly does not unshare a new uts namespace, but also does not return -EINVAL. Fix this to return -EINVAL so the caller knows his request was denied. Signed-off-by:
-
Alan Cox authored
Its now used.. because we added the new definitions so enabled all the goodies on i386 Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Jeff Dike authored
UML/x86_64 needs the same packing of struct epoll_event as x86_64. Signed-off-by:
-
Jiri Kosina authored
isar_bh() bh handler calls another (compatible) bh handler - BChannel_bh() - but passes struct BCState* instead of struct work_struct*, which seems wrong. Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
john stultz authored
On Bob's machine clocksource is selecting PIT over the ACPI PM timer, because he has the PIIX4 bug. That bug drops the ACPI PM timers rating to the same as the PIT, so that's why you're getting the PIT. Realistically, the PIT is much slower then even the triple read ACPI PM, so the de-ranking code is probably dropping it too far. So don't drop ACPI PM quite so low if we see the PIIX4 bug. Signed-off-by:
-
Daniel Drake authored
Commit d720bc4b partially removed a private implementation of baud speed decoding. However it doesn't seem to be complete: after the speed is decoded, it is still being used as an index to a local speed table (array overrun, no doubt). This was found by Graham Murray who noticed it caused a 2.6.19 regression with the SX driver: https://bugs.gentoo.org/170554Signed-off-by:
Daniel Drake <dsd@gentoo.org> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by:
-
NeilBrown authored
... still not sure why we need this .... Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
If this mddev and queue got reused for another array that doesn't register a congested_fn, this function would get called incorretly. Signed-off-by:
-
NeilBrown authored
All that is missing the the function pointers in raid4_pers. Signed-off-by:
-
J. Bruce Fields authored
This cancel_delayed_work call is called from a function that is only called from a piece of code that immediate follows a cancel and destruction of the workqueue, so it's clearly a mistake. Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by:
-
Bruce Fields authored
The reused clientid here is a more of a problem for the client than the server, and the client can report the problem itself if it's serious. Signed-off-by:
-
Bruce Fields authored
A regression introduced in the last set of acl patches removed the INHERIT_ONLY flag from aces derived from the posix acl. Fix. Signed-off-by:
-
NeilBrown authored
->readdir passes lofft_t offsets (used as nfs cookies) to nfs3svc_encode_entry{,_plus}, but when they pass it on to encode_entry it becomes an 'off_t', which isn't good. So filesystems that returned 64bit offsets would lose. Signed-off-by: -
Venki Pallipadi authored
Ingo reported it on lkml in the thread "2.6.21-rc5: maxcpus=1 crash in cpufreq: kernel BUG at drivers/cpufreq/cpufreq.c:82!" This check added to remove_dev is symmetric to one in add_dev and handles callbacks for offline cpus cleanly. Signed-off-by:
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ingo Molnar authored
failed VM entry on VMX might still change %fs or %gs, thus make sure that KVM always reloads the segment selectors. This is crutial on both x86 and x86_64: x86 has __KERNEL_PDA in %fs on which things like 'current' depends and x86_64 has 0 there and needs MSR_GS_BASE to work. Signed-off-by: -
Avi Kivity authored
Intel virtualization extensions do not support virtualizing real mode. So kvm uses virtualized vm86 mode to run real mode code. Unfortunately, this virtualized vm86 mode does not support the so called "big real" mode, where the segment selector and base do not agree with each other according to the real mode rules (base == selector << 4). To work around this, kvm checks whether a selector/base pair violates the virtualized vm86 rules, and if so, forces it into conformance. On a transition back to protected mode, if we see that the guest did not touch a forced segment, we restore it back to the original protected mode value. This pile of hacks breaks down if the gdt has changed in real mode, as it can cause a segment selector to point to a system descriptor instead of a normal data segment. In fact, this happens with the Windows bootloader and the qemu acpi bios, where a protected mode memcpy routine issues an innocent 'pop %es' and traps on an attempt to load a system descriptor. "Fix" by checking if the to-be-restored selector points at a system segment, and if so, coercing it into a normal data segment. The long term solution, of course, is to abandon vm86 mode and use emulation for big real mode. Signed-off-by:Avi Kivity <avi@qumranet.com>
-
Thomas Viehweger authored
After freeing a block there should be no reference to this block. Signed-off-by:
Thomas Viehweger <Thomas.Viehweger@marconi.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Olaf Hering pointed out that SAA7146_CLIPPING_MEM would become very large for PAGE_SIZE > 4K. In fact, the number of clipping windows is limited to 16, and calculate_clipping_registers_rect() does not use more than 256 bytes. SAA7146_CLIPPING_MEM adjusted accordingly. Thanks-to: Olaf Hering <olaf@aepfle.de> Acked-by:
Michael Hunold <hunold@linuxtv.org> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Jean Delvare authored
Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Returning -1 causes the probe to stop, but it should just continue instead. Signed-off-by:
-
