- 07 Mar, 2017 1 commit
-
-
Kieran Bingham authored
The interface to configure the LIF in the VSP1 requires adapting the function prototype for any changes. This makes extending the interface difficult. Change the function prototype to pass a structure which can be easily extended. This changes the means of disabling the pipeline, by now passing a NULL configuration rather than passing either a 0 width or height. [Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const] Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 06 Mar, 2017 1 commit
-
-
Jonathan McDowell authored
On Kernel 4.9, WARNINGs about doing DMA on stack are hit at the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach(). Both were due to the use of buffers on the stack as parameters to dvb_usb_generic_rw() and the resulting attempt to do DMA with them. The device was non-functional as a result. So, switch this driver over to use a buffer within the device state structure, as has been done with other DVB-USB drivers. Tested with TechnoTrend TT-connect S2-4600. [mchehab@osg.samsung.com: fixed a warning at su3000_i2c_transfer() that state var were dereferenced before check 'd'] Signed-off-by:
Jonathan McDowell <noodles@earth.li> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 03 Mar, 2017 5 commits
-
-
Sean Young authored
ir_raw_event_register() sets up change_protocol(), and without that set, rc_setup_rx_device() does not set the protocol for the device on register. The standard udev rules run ir-keytable, which writes to the protocols file again, which hides this problem. Fixes: 7ff2c2bc ("[media] rc-main: split setup and unregister functions") Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
When the protocol is set via the sysfs protocols attribute, the decoder is loaded. However, when it is not when a device is first plugged in or registered. Fixes: acc1c3c6 ("[media] media: rc: load decoder modules on-demand") Signed-off-by:
-
Heiner Kallweit authored
nvt_write_wakeup_codes acquires the same lock as the ISR but doesn't disable interrupts on the local CPU. This caused the following deadlock. Fix this by using spin_lock_irqsave. [ 432.362008] ================================ [ 432.362074] WARNING: inconsistent lock state [ 432.362144] 4.10.0-rc7-next-20170210 #1 Not tainted [ 432.362219] -------------------------------- [ 432.362286] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 432.362379] swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 432.362457] (&(&nvt->lock)->rlock){?.+...}, at: [<ffffffffa016b17d>] nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.362611] {HARDIRQ-ON-W} state was registered at: [ 432.362686] [ 432.362698] [<ffffffff810adb7c>] __lock_acquire+0x5dc/0x1260 [ 432.362812] [ 432.362817] [<ffffffff810aec29>] lock_acquire+0xe9/0x1d0 [ 432.362927] [ 432.362934] [<ffffffff81609f63>] _raw_spin_lock+0x33/0x50 [ 432.363045] [ 432.363051] [<ffffffffa016b822>] nvt_write_wakeup_codes.isra.12+0x22/0xe0 [nuvoton_cir] [ 432.363193] [ 432.363199] [<ffffffffa016b9bf>] wakeup_data_store+0xdf/0xf0 [nuvoton_cir] [ 432.363327] [ 432.363333] [<ffffffff81484223>] dev_attr_store+0x13/0x20 [ 432.363441] [ 432.363449] [<ffffffff81232450>] sysfs_kf_write+0x40/0x50 [ 432.363558] [ 432.363564] [<ffffffff81231640>] kernfs_fop_write+0x150/0x1e0 [ 432.363676] [ 432.363685] [<ffffffff811b36a3>] __vfs_write+0x23/0x120 [ 432.363791] [ 432.363798] [<ffffffff811b4d53>] vfs_write+0xc3/0x1e0 [ 432.363902] [ 432.363909] [<ffffffff811b6124>] SyS_write+0x44/0xa0 [ 432.364012] [ 432.364021] [<ffffffff81002c47>] do_syscall_64+0x57/0x140 [ 432.364129] [ 432.364135] [<ffffffff8160a9e4>] return_from_SYSCALL_64+0x0/0x7a [ 432.364252] irq event stamp: 415118 [ 432.364313] hardirqs last enabled at (415115): [<ffffffff814fd2eb>] cpuidle_enter_state+0x11b/0x370 [ 432.364445] hardirqs last disabled at (415116): [<ffffffff8160b2cb>] common_interrupt+0x8b/0x90 [ 432.364573] softirqs last enabled at (415118): [<ffffffff8106157c>] _local_bh_enable+0x1c/0x50 [ 432.364699] softirqs last disabled at (415117): [<ffffffff810629a3>] irq_enter+0x43/0x60 [ 432.364814] other info that might help us debug this: [ 432.364909] Possible unsafe locking scenario: [ 432.367821] CPU0 [ 432.370645] ---- [ 432.373432] lock(&(&nvt->lock)->rlock); [ 432.376228] <Interrupt> [ 432.378982] lock(&(&nvt->lock)->rlock); [ 432.381757] *** DEADLOCK *** [ 432.389888] no locks held by swapper/0/0. [ 432.392574] stack backtrace: [ 432.397774] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc7-next-20170210 #1 [ 432.400375] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [ 432.403023] Call Trace: [ 432.405636] <IRQ> [ 432.408208] dump_stack+0x68/0x93 [ 432.410775] print_usage_bug+0x1dd/0x1f0 [ 432.413334] mark_lock+0x559/0x5c0 [ 432.415871] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 432.418431] __lock_acquire+0x6b1/0x1260 [ 432.420941] lock_acquire+0xe9/0x1d0 [ 432.423396] ? nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.425844] _raw_spin_lock+0x33/0x50 [ 432.428252] ? nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.430670] nvt_cir_isr+0x2d/0x520 [nuvoton_cir] [ 432.433085] __handle_irq_event_percpu+0x43/0x330 [ 432.435493] handle_irq_event_percpu+0x1e/0x50 [ 432.437884] handle_irq_event+0x34/0x60 [ 432.440236] handle_edge_irq+0x6a/0x150 [ 432.442561] handle_irq+0x15/0x20 [ 432.444854] do_IRQ+0x57/0x110 [ 432.447115] common_interrupt+0x90/0x90 [ 432.449380] RIP: 0010:cpuidle_enter_state+0x120/0x370 [ 432.451653] RSP: 0018:ffffffff81c03dd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffffcc [ 432.453994] RAX: ffffffff81c14500 RBX: 0000000000000008 RCX: 00000064aac6f2d2 [ 432.456349] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff81c14500 [ 432.458704] RBP: ffffffff81c03e18 R08: cccccccccccccccd R09: 0000000000000018 [ 432.461072] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880100a21260 [ 432.463450] R13: ffffffff81c7e6f8 R14: 0000000000000008 R15: ffffffff81c7e6e0 [ 432.465819] </IRQ> [ 432.468104] ? cpuidle_enter_state+0x11b/0x370 [ 432.470413] cpuidle_enter+0x12/0x20 [ 432.472698] call_cpuidle+0x1e/0x40 [ 432.474967] do_idle+0xe3/0x1c0 [ 432.477172] cpu_startup_entry+0x18/0x20 [ 432.479376] rest_init+0x130/0x140 [ 432.481565] start_kernel+0x3cc/0x3d9 [ 432.483750] x86_64_start_reservations+0x2a/0x2c [ 432.485980] x86_64_start_kernel+0x178/0x18b [ 432.488222] start_cpu+0x14/0x14 [ 432.490453] ? start_cpu+0x14/0x14 Fixes: 97c12974 "[media] rc: nuvoton-cir: Add support wakeup via sysfs filter callback" Signed-off-by:Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Sean Young authored
The locking in lirc needs improvement, but for now just fix this potential deadlock. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-rc1+ #1 Not tainted ------------------------------------------------------- bash/2502 is trying to acquire lock: (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffc06f6a5e>] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] but task is already holding lock: (&dev->lock){+.+.+.}, at: [<ffffffffc06f511f>] store_filter+0x9f/0x240 [rc_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->lock){+.+.+.}: [<ffffffffa110adad>] lock_acquire+0xfd/0x200 [<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0 [<ffffffffc06f436a>] rc_open+0x2a/0x80 [rc_core] [<ffffffffc07114ca>] lirc_dev_fop_open+0xda/0x1e0 [lirc_dev] [<ffffffffa12975e0>] chrdev_open+0xb0/0x210 [<ffffffffa128eb5a>] do_dentry_open+0x20a/0x2f0 [<ffffffffa128ffcc>] vfs_open+0x4c/0x80 [<ffffffffa12a35ec>] path_openat+0x5bc/0xc00 [<ffffffffa12a5271>] do_filp_open+0x91/0x100 [<ffffffffa12903f0>] do_sys_open+0x130/0x220 [<ffffffffa12904fe>] SyS_open+0x1e/0x20 [<ffffffffa19278c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #1 (lirc_dev_lock){+.+.+.}: [<ffffffffa110adad>] lock_acquire+0xfd/0x200 [<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0 [<ffffffffc0711f47>] lirc_register_driver+0x67/0x59b [lirc_dev] [<ffffffffc06db7f4>] ir_lirc_register+0x1f4/0x260 [ir_lirc_codec] [<ffffffffc06f6cac>] ir_raw_handler_register+0x7c/0xb0 [rc_core] [<ffffffffc0398010>] 0xffffffffc0398010 [<ffffffffa1002192>] do_one_initcall+0x52/0x1b0 [<ffffffffa11ef5c8>] do_init_module+0x5f/0x1fa [<ffffffffa11566b5>] load_module+0x2675/0x2b00 [<ffffffffa1156dcf>] SYSC_finit_module+0xdf/0x110 [<ffffffffa1156e1e>] SyS_finit_module+0xe/0x10 [<ffffffffa1003f5c>] do_syscall_64+0x6c/0x1f0 [<ffffffffa1927989>] return_from_SYSCALL_64+0x0/0x7a -> #0 (ir_raw_handler_lock){+.+.+.}: [<ffffffffa110a7b7>] __lock_acquire+0x10f7/0x1290 [<ffffffffa110adad>] lock_acquire+0xfd/0x200 [<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0 [<ffffffffc06f6a5e>] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] [<ffffffffc0b0f492>] loop_set_wakeup_filter+0x62/0xbd [rc_loopback] [<ffffffffc06f522a>] store_filter+0x1aa/0x240 [rc_core] [<ffffffffa15e46f8>] dev_attr_store+0x18/0x30 [<ffffffffa13318e5>] sysfs_kf_write+0x45/0x60 [<ffffffffa1330b55>] kernfs_fop_write+0x155/0x1e0 [<ffffffffa1290797>] __vfs_write+0x37/0x160 [<ffffffffa12921f8>] vfs_write+0xc8/0x1e0 [<ffffffffa12936e8>] SyS_write+0x58/0xc0 [<ffffffffa19278c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Chain exists of: ir_raw_handler_lock --> lirc_dev_lock --> &dev->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->lock); lock(lirc_dev_lock); lock(&dev->lock); lock(ir_raw_handler_lock); *** DEADLOCK *** 4 locks held by bash/2502: #0: (sb_writers#4){.+.+.+}, at: [<ffffffffa12922c5>] vfs_write+0x195/0x1e0 #1: (&of->mutex){+.+.+.}, at: [<ffffffffa1330b1f>] kernfs_fop_write+0x11f/0x1e0 #2: (s_active#215){.+.+.+}, at: [<ffffffffa1330b28>] kernfs_fop_write+0x128/0x1e0 #3: (&dev->lock){+.+.+.}, at: [<ffffffffc06f511f>] store_filter+0x9f/0x240 [rc_core] stack backtrace: CPU: 3 PID: 2502 Comm: bash Not tainted 4.10.0-rc1+ #1 Hardware name: /DG45ID, BIOS IDG4510H.86A.0135.2011.0225.1100 02/25/2011 Call Trace: dump_stack+0x86/0xc3 print_circular_bug+0x1be/0x210 __lock_acquire+0x10f7/0x1290 lock_acquire+0xfd/0x200 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] mutex_lock_nested+0x77/0x6d0 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] ? loop_set_wakeup_filter+0x44/0xbd [rc_loopback] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] loop_set_wakeup_filter+0x62/0xbd [rc_loopback] ? loop_set_tx_duty_cycle+0x70/0x70 [rc_loopback] store_filter+0x1aa/0x240 [rc_core] dev_attr_store+0x18/0x30 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x155/0x1e0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x4a/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0x10c/0x220 ? vfs_write+0x195/0x1e0 ? security_file_permission+0x3b/0xc0 vfs_write+0xc8/0x1e0 SyS_write+0x58/0xc0 entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by: -
Sean Young authored
When the interrupt requested with devm_request_irq(), serial_ir.rcdev is still null so will cause null deference if the irq handler is called early on. Also ensure that timeout_timer is setup. Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com [mchehab@s-opensource.com: moved serial_ir_probe() back to its original place] Cc: <stable@vger.kernel.org> # 4.10 Signed-off-by:
-
- 08 Feb, 2017 22 commits
-
-
Minghsiu Tsai authored
After removing DEBUG from mtk_vcodec_util.h, some build warnings are generated as the following: .../drivers/media/platform/mtk-vcodec/vdec_vpu_if.c: In function 'vcodec_vpu_send_msg': .../drivers/media/platform/mtk-vcodec/vdec_vpu_if.c:73:11: warning: unused variable 'msg_id' [-Wunused-variable] uint32_t msg_id = *(uint32_t *)msg; ^ .../drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c: In function 'vb2ops_vdec_buf_queue': .../drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:1129:7: warning: unused variable 'log_level' [-Wunused-variable] int log_level = ret ? 0 : 1; ^ .../drivers/media/platform/mtk-vcodec/venc_vpu_if.c: In function 'vpu_enc_send_msg': .../drivers/media/platform/mtk-vcodec/venc_vpu_if.c:82:12: warning: unused variable 'msg_id' [-Wunused-variable] uint32_t msg_id = *(uint32_t *)msg; ^ It is because mtk_vcodec_debug() and mtk_vcodec_err() are defined as empty macros. Without DEBUG definition, the variable for debugging is not used anymore. Fixing build warnings by moving the assignment of the variable to the argument of mtk_vcodec_debug() and mtk_vcodec_err(). Within the patch, build pass with/without DEBUG definition, and functions still work fine. Signed-off-by:Minghsiu Tsai <minghsiu.tsai@mediatek.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Arnd Bergmann authored
If the USB driver is enabled but the demodulator is not, we get a link error: ERROR: "zd1301_demod_get_dvb_frontend" [drivers/media/usb/dvb-usb-v2/zd1301.ko] undefined! ERROR: "zd1301_demod_get_i2c_adapter" [drivers/media/usb/dvb-usb-v2/zd1301.ko] undefined! Such a configuration obviously makes no sense, but we should not fail the build. This tries to mimic what we have for other drivers by turning the build failure into a runtime failure. Alternatively we could use an unconditional 'select' or 'depends on' to enforce a sane configuration. Fixes: 47d65372 ("[media] zd1301_demod: ZyDAS ZD1301 DVB-T demodulator driver") Fixes: 992b3987 ("[media] zd1301: ZyDAS ZD1301 DVB USB interface driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lubomir Rintel authored
Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Stefan Brüns authored
Commit 17ce039b ("[media] cxusb: don't do DMA on stack") added a kmalloc'ed bounce buffer for writes, but missed to do the same for reads. As the read only happens after the write is finished, we can reuse the same buffer. As dvb_usb_generic_rw handles a read length of 0 by itself, avoid calling it using the dvb_usb_generic_read wrapper function. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
-
Arnd Bergmann authored
gcc-7.0.1 warns about old code in ttpci: In file included from drivers/media/pci/ttpci/av7110.c:63:0: In function 'irdebi.isra.2', inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3, inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:659:3: drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] memcpy(av7110->debi_virt, (char *) &res, count); In function 'irdebi.isra.2', inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3, inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:668:3: drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] memcpy(av7110->debi_virt, (char *) &res, count); Apparently, 'count' can be negative here, which will then get turned into a giant size argument for memcpy. Changing the sizes to 'unsigned int' instead seems safe as we already check for maximum sizes, and it also simplifies the code a bit. Signed-off-by: -
Arnd Bergmann authored
I ran into a stack frame size warning because of the on-stack copy of the USB device structure: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Copying a device structure like this is wrong for a number of other reasons too aside from the possible stack overflow. One of them is that the dev_info() call will print the name of the device later, but AFAICT we have only copied a pointer to the name earlier and the actual name has been freed by the time it gets printed. This removes the on-stack copy of the device and instead copies the device name using kstrdup(). I'm ignoring the possible failure here as both printk() and kfree() are able to deal with NULL pointers. Signed-off-by:
-
Piotr Oleszczyk authored
Adding Hama Hybrid DVB-T Stick support. Technically it's the same device what Terratec Cinergy HT USB XE is. Signed-off-by:
Piotr Oleszczyk <piotr.oleszczyk@gmail.com> Signed-off-by:
-
Sakari Ailus authored
Fix a compiler warning due to an unused but assigned variable. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Fengguang Wu authored
drivers/media/i2c/et8ek8/et8ek8_driver.c:1112:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Marek Szyprowski authored
Add simple 'functionality' member to dummy Exynos IS i2c adapter to make i2c core happy and get rid of NULL pointer dereference during Exynos4 IS probe since v4.10-rc1: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 100 Comm: kworker/1:2 Not tainted 4.10.0-rc6-next-20170131-00054-g39e6e4233de6 #1921 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func task: ef2e0000 task.stack: ef2ec000 PC is at 0x0 LR is at i2c_register_adapter+0x98/0x5cc ... [<c05040bc>] (i2c_register_adapter) from [<c05379d4>] (fimc_is_i2c_probe+0x84/0xe4) [<c05379d4>] (fimc_is_i2c_probe) from [<c041b5c8>] (platform_drv_probe+0x50/0xb0) [<c041b5c8>] (platform_drv_probe) from [<c0419f48>] (driver_probe_device+0x234/0x2dc) [<c0419f48>] (driver_probe_device) from [<c04184e0>] (bus_for_each_drv+0x44/0x8c) [<c04184e0>] (bus_for_each_drv) from [<c0419c8c>] (__device_attach+0x9c/0x100) [<c0419c8c>] (__device_attach) from [<c0419374>] (bus_probe_device+0x84/0x8c) [<c0419374>] (bus_probe_device) from [<c04178d4>] (device_add+0x380/0x528) [<c04178d4>] (device_add) from [<c05aceb4>] (of_platform_device_create_pdata+0x70/0xa4) [<c05aceb4>] (of_platform_device_create_pdata) from [<c05acfd4>] (of_platform_bus_create+0xec/0x320) [<c05acfd4>] (of_platform_bus_create) from [<c05ad264>] (of_platform_populate+0x5c/0xac) [<c05ad264>] (of_platform_populate) from [<c0533420>] (fimc_is_probe+0x1c0/0x4cc) [<c0533420>] (fimc_is_probe) from [<c041b5c8>] (platform_drv_probe+0x50/0xb0) [<c041b5c8>] (platform_drv_probe) from [<c0419f48>] (driver_probe_device+0x234/0x2dc) [<c0419f48>] (driver_probe_device) from [<c04184e0>] (bus_for_each_drv+0x44/0x8c) [<c04184e0>] (bus_for_each_drv) from [<c0419c8c>] (__device_attach+0x9c/0x100) [<c0419c8c>] (__device_attach) from [<c0419374>] (bus_probe_device+0x84/0x8c) [<c0419374>] (bus_probe_device) from [<c04197a8>] (deferred_probe_work_func+0x60/0x8c) [<c04197a8>] (deferred_probe_work_func) from [<c01329a4>] (process_one_work+0x120/0x31c) [<c01329a4>] (process_one_work) from [<c0132bc8>] (process_scheduled_works+0x28/0x38) [<c0132bc8>] (process_scheduled_works) from [<c0132ddc>] (worker_thread+0x204/0x4ac) [<c0132ddc>] (worker_thread) from [<c01381b8>] (kthread+0xfc/0x134) [<c01381b8>] (kthread) from [<c01078b8>] (ret_from_fork+0x14/0x3c) Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Niklas Söderlund authored
All lanes in data-lanes and clock-lanes properties should be unique. Add a check for this in v4l2_of_parse_csi_bus() and print a warning if duplicated lanes are found. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: -
Hugues Fruchet authored
Adds some trace points showing input compressed stream or output decoded frame information. Adds an unconditional trace point when streaming starts showing the compressed stream and the decoded frame information. Adds an unconditional trace point at instance closure summarizing into a single line the decoding process (stream information, decoded and output frames number, potential errors observed). Acked-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Adds support of DELTA MJPEG video decoder back-end, implemented by calling JPEG_DECODER_HW0 firmware using RPMSG IPC communication layer. Acked-by:
-
Hugues Fruchet authored
EOS (End Of Stream) support allows user to get all the potential decoded frames remaining in decoder pipeline after having reached the end of video bitstream. To do so, user calls VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) which will drain the decoder and get the drained frames that are then returned to user. User is informed of EOS completion in two ways: - dequeue of an empty frame flagged to V4L2_BUF_FLAG_LAST - reception of a V4L2_EVENT_EOS event. If, unfortunately, no buffer is available on CAPTURE queue to return the empty frame, EOS is delayed till user queue one CAPTURE buffer. Acked-by:
-
Hugues Fruchet authored
IPC (Inter Process Communication) support for communication with DELTA coprocessor firmware using rpmsg kernel framework. Based on 4 services open/set_stream/decode/close and their associated rpmsg messages. The messages structures are duplicated on both host and firmware side and are packed (use only of 32 bits size fields in messages structures to ensure packing). Each service is synchronous; service returns only when firmware acknowledges the associated command message. Due to significant parameters size exchanged from host to copro, parameters are not inserted in rpmsg messages. Instead, parameters are stored in physical memory shared between host and coprocessor. Memory is non-cacheable, so no special operation is required to ensure memory coherency on host and on coprocessor side. Multi-instance support and re-entrance are ensured using host_hdl and copro_hdl in message header exchanged between both host and coprocessor. This avoids to manage tables on both sides to get back the running context of each instance. Acked-by:
-
Hugues Fruchet authored
Helper functions used by decoder back-ends to allocate physically contiguous memory required by hardware video decoder. Acked-by:
-
Hugues Fruchet authored
This V4L2 driver enables DELTA multi-format video decoder of STMicroelectronics STiH4xx SoC series. Acked-by:
-
Hugues Fruchet authored
Add entry for the STMicroelectronics DELTA driver. Acked-by:
-
Hugues Fruchet authored
Enables support of STMicroelectronics STiH4xx SoC series DELTA multi-format video decoder V4L2 driver. Acked-by:
-
Hugues Fruchet authored
This patch adds DT node for STMicroelectronics DELTA V4L2 video decoder Signed-off-by:
-
Hugues Fruchet authored
This patch adds DT binding documentation for STMicroelectronics DELTA V4L2 video decoder. Acked-by:
-
- 07 Feb, 2017 2 commits
-
-
Oleh Kravchenko authored
Internal Master 3 Bus can send and receive only 4 bytes per time. Signed-off-by:
Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by:
-
Oleh Kravchenko authored
This patch provide only digital support. The device is based on Si2168 30-demodulator, Si2158-20 tuner and CX23102-11Z chipset; USB id: 1b80:d3b2. Status: - DVB-T2 works fine; - Composite and SVideo works fine; - Analog not implemented. Signed-off-by:
-
- 03 Feb, 2017 9 commits
-
-
Tuukka Toivonen authored
v4l2-async had several functions doing some operations and then not undoing the operations in a failure situation. For example, v4l2_async_test_notify() moved a subdev into notifier's done list even if registering the subdev (v4l2_device_register_subdev) failed. If the subdev was allocated and v4l2_async_register_subdev() called from the driver's probe() function, as usually, the probe() function freed the allocated subdev and returned a failure. Nevertheless, the subdev was still left into the notifier's done list, causing an access to already freed memory when the notifier was later unregistered. A hand-edited call trace leaving freed subdevs into the notifier: v4l2_async_register_notifier(notifier, asd) cameradrv_probe sd = devm_kzalloc() v4l2_async_register_subdev(sd) v4l2_async_test_notify(notifier, sd, asd) list_move(sd, ¬ifier->done) v4l2_device_register_subdev(notifier->v4l2_dev, sd) cameradrv_registered(sd) -> fails ->v4l2_async_register_subdev returns failure ->cameradrv_probe returns failure ->devres frees the allocated sd ->sd was freed but it still remains in the notifier's list. This patch fixes this and several other cases where a failing function could leave nodes into a linked list while the caller might free the node due to a failure. Signed-off-by:Tuukka Toivonen <tuukka.toivonen@intel.com> Acked-by:
-
Dan Carpenter authored
We should be returning negative error codes here or it leads to a crash. This also silences a static checker warning. drivers/media/pci/mantis/mantis_cards.c:250 mantis_pci_probe() warn: 'mantis->dmxdev.dvbdev->fops' double freed Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Javier Martinez Canillas authored
There isn't an ioctl to enum the supported field orders, so a user-space application can call VIDIOC_TRY_FMT using different field orders to know if one is supported. For example, GStreamer does this so during playback dozens of the following messages appear in the kernel log buffer: [ 442.143393] Not supported field order(4) Instead of printing this as an error, just keep it as debug information. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Marc Duponcheel <marc@offline.be>, firmware load on dvb-usb is using the stack, with is not allowed anymore on default Kernel configurations: [ 1025.958836] dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware [ 1025.958853] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 1025.958855] dvb-usb: could not stop the USB controller CPU. [ 1025.958856] dvb-usb: error while transferring firmware (transferred size: -11, block size: 3) [ 1025.958856] dvb-usb: firmware download failed at 8 with -22 [ 1025.958867] usbcore: registered new interface driver dvb_usb_dtt200u [ 2.789902] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 2.789905] ------------[ cut here ]------------ [ 2.789911] WARNING: CPU: 3 PID: 2196 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [ 2.789912] transfer buffer not dma capable [ 2.789912] Modules linked in: btusb dvb_usb_dtt200u(+) dvb_usb_af9035(+) btrtl btbcm dvb_usb dvb_usb_v2 btintel dvb_core bluetooth rc_core rfkill x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect pcspkr i2c_i801 sysimgblt fb_sys_fops drm i2c_smbus i2c_core r8169 lpc_ich mfd_core mii thermal fan rtc_cmos video button acpi_cpufreq processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd crc32c_intel ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod [ 2.789936] CPU: 3 PID: 2196 Comm: systemd-udevd Not tainted 4.9.0-gentoo #1 [ 2.789937] Hardware name: ASUS All Series/H81I-PLUS, BIOS 0401 07/23/2013 [ 2.789938] ffffc9000339b690 ffffffff812bd397 ffffc9000339b6e0 0000000000000000 [ 2.789939] ffffc9000339b6d0 ffffffff81055c86 000006300339b6a0 ffff880116c0c000 [ 2.789941] 0000000000000000 0000000000000000 0000000000000001 ffff880116c08000 [ 2.789942] Call Trace: [ 2.789945] [<ffffffff812bd397>] dump_stack+0x4d/0x66 [ 2.789947] [<ffffffff81055c86>] __warn+0xc6/0xe0 [ 2.789948] [<ffffffff81055cea>] warn_slowpath_fmt+0x4a/0x50 [ 2.789952] [<ffffffffa006d460>] usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [ 2.789954] [<ffffffff814ed5a8>] ? io_schedule_timeout+0xd8/0x110 [ 2.789956] [<ffffffffa006e09c>] usb_hcd_submit_urb+0x9c/0x980 [usbcore] [ 2.789958] [<ffffffff812d0ebf>] ? copy_page_to_iter+0x14f/0x2b0 [ 2.789960] [<ffffffff81126818>] ? pagecache_get_page+0x28/0x240 [ 2.789962] [<ffffffff8118c2a0>] ? touch_atime+0x20/0xa0 [ 2.789964] [<ffffffffa006f7c4>] usb_submit_urb+0x2c4/0x520 [usbcore] [ 2.789967] [<ffffffffa006feca>] usb_start_wait_urb+0x5a/0xe0 [usbcore] [ 2.789969] [<ffffffffa007000c>] usb_control_msg+0xbc/0xf0 [usbcore] [ 2.789970] [<ffffffffa067903d>] usb_cypress_writemem+0x3d/0x40 [dvb_usb] [ 2.789972] [<ffffffffa06791cf>] usb_cypress_load_firmware+0x4f/0x130 [dvb_usb] [ 2.789973] [<ffffffff8109dbbe>] ? console_unlock+0x2fe/0x5d0 [ 2.789974] [<ffffffff8109e10c>] ? vprintk_emit+0x27c/0x410 [ 2.789975] [<ffffffff8109e40a>] ? vprintk_default+0x1a/0x20 [ 2.789976] [<ffffffff81124d76>] ? printk+0x43/0x4b [ 2.789977] [<ffffffffa0679310>] dvb_usb_download_firmware+0x60/0xd0 [dvb_usb] [ 2.789979] [<ffffffffa0679898>] dvb_usb_device_init+0x3d8/0x610 [dvb_usb] [ 2.789981] [<ffffffffa069e302>] dtt200u_usb_probe+0x92/0xd0 [dvb_usb_dtt200u] [ 2.789984] [<ffffffffa007420c>] usb_probe_interface+0xfc/0x270 [usbcore] [ 2.789985] [<ffffffff8138bf95>] driver_probe_device+0x215/0x2d0 [ 2.789986] [<ffffffff8138c0e6>] __driver_attach+0x96/0xa0 [ 2.789987] [<ffffffff8138c050>] ? driver_probe_device+0x2d0/0x2d0 [ 2.789988] [<ffffffff81389ffb>] bus_for_each_dev+0x5b/0x90 [ 2.789989] [<ffffffff8138b7b9>] driver_attach+0x19/0x20 [ 2.789990] [<ffffffff8138b33c>] bus_add_driver+0x11c/0x220 [ 2.789991] [<ffffffff8138c91b>] driver_register+0x5b/0xd0 [ 2.789994] [<ffffffffa0072f6c>] usb_register_driver+0x7c/0x130 [usbcore] [ 2.789994] [<ffffffffa06a5000>] ? 0xffffffffa06a5000 [ 2.789996] [<ffffffffa06a501e>] dtt200u_usb_driver_init+0x1e/0x20 [dvb_usb_dtt200u] [ 2.789997] [<ffffffff81000408>] do_one_initcall+0x38/0x140 [ 2.789998] [<ffffffff8116001c>] ? __vunmap+0x7c/0xc0 [ 2.789999] [<ffffffff81124fb0>] ? do_init_module+0x22/0x1d2 [ 2.790000] [<ffffffff81124fe8>] do_init_module+0x5a/0x1d2 [ 2.790002] [<ffffffff810c96b1>] load_module+0x1e11/0x2580 [ 2.790003] [<ffffffff810c68b0>] ? show_taint+0x30/0x30 [ 2.790004] [<ffffffff81177250>] ? kernel_read_file+0x100/0x190 [ 2.790005] [<ffffffff810c9ffa>] SyS_finit_module+0xba/0xc0 [ 2.790007] [<ffffffff814f13e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [ 2.790008] ---[ end trace c78a74e78baec6fc ]--- So, allocate the structure dynamically. Cc: stable@vger.kernel.org # Kernel 4.9+ Signed-off-by: -
Christophe JAILLET authored
It is likely that a "of_node_put(ep)" is missing here. There is one in the previous error handling code, and one a few lines below in the normal case as well. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Bhumika Goyal authored
Declare vb2_ops structure as const as it is only stored in the ops field of a vb2_queue structure. This field is of type const, so vb2_ops structures having same properties can be made const too. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p={...}; @ok1@ identifier r1.i; position p; struct sta2x11_vip vip; struct vb2_queue q; @@ ( vip.vb_vidq.ops=&i@p | q.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct vb2_ops i; File size details of media/dvb-frontends/rtl2832_sdr.o file remains the same before and after applying the patch. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Declare vb2_ops structure as const as it is only stored in the ops field of a vb2_queue structure. This field is of type const, so vb2_ops structures having same properties can be made const too. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p={...}; @ok1@ identifier r1.i; position p; struct sta2x11_vip vip; struct vb2_queue q; @@ ( vip.vb_vidq.ops=&i@p | q.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct vb2_ops i; File size before: text data bss dec hex filename 8448 440 0 8888 22b8 media/pci/sta2x11/sta2x11_vip.o File size after: text data bss dec hex filename 8552 352 0 8904 22c8 media/pci/sta2x11/sta2x11_vip.o Signed-off-by: -
Laurent Pinchart authored
Set the subdev devnode pointer right after registration to ensure that later errors won't skip the subdev when unregistering all devnodes. Signed-off-by:
-
Baruch Siach authored
The Freescale provided imx-vpu looks for firmware files under /lib/firmware/vpu by default. Make coda look there for firmware files to ease the update path. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
