- 15 Jun, 2018 17 commits
-
-
Anthony Koo authored
Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Eric Bernstein authored
Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Hersen Wu authored
This change shorten wait time when HPD LOW. With HPD LOW, without this change, AUX routine delay is 450us. With this change, it is 42us. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Anthony Koo authored
Signed-off-by:
-
Tony Cheng authored
Signed-off-by:
-
Dmytro Laktyushkin authored
This change will allow the viewport overlap to apply to rotated/ mirrored surfaces. Viewport overlap results in extra pixels being added to viewport allowing the first few pixels to be scaled as if there is no cut-off(mpo or pipe split) and allows us to get matching crc's between scaled split and unsplit outputs of the same thing. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Charlene Liu authored
Signed-off-by:
Vitaly Prosyak <Vitaly.Prosyak@amd.com> Acked-by:
-
Eric Bernstein authored
Signed-off-by:
-
Nayan Deshmukh authored
Signed-off-by:
Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Nayan Deshmukh authored
convert existing raw comments into kernel-doc format as well as add new documentation v2: reword the overview Signed-off-by:
-
Gustavo A. R. Silva authored
Currently, the maximum value that *counter* can reach is 255, and code at line 150: while (counter < 1000) { implies a bigger value could be expected. Fix this by changing the type of variable *counter* from uint8_t to uint16_t. Addresses-Coverity-ID: 1470030 ("Operands don't affect result") Fixes: 2b6199a1 ("drm/amd/display: replace msleep with udelay in fbc path") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Alex Deucher authored
The uvd version information was not set correctly for vega20. Rearrange the logic to set it correctly and fix the warnings as a result. v2: fix version formatting for userspace based on feedback from Leo Fixes: 96ca7f298f (drm/amdgpu/vg20:support new UVD FW version naming convention) Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
James Zhu authored
Vega20 UVD Firmware has a new version naming convention: [31, 30] for encode interface major [29, 24] for encode interface minor [15, 8] for decode interface minor [7, 0] for hardware family id Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
-
Rex Zhu authored
if vbios not set the max clock voltage limit table for DC mode, Set the table as sama as the table for AC mode. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
make custom values survive when S3 sleep transitions. so not reset the od table if it is not null. Reviewed-by:
-
Christian König authored
Per VM BOs share the reservation object with the PD and so need to reserve a shared fence slot for the update. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.18. Highlights: - Fixes for gfxoff on Raven - Remove an ATPX quirk now that the root cause is fixed - Runtime PM fixes - Vega20 register header update - Wattman fixes - Misc bug fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614141428.2909-1-alexander.deucher@amd.com
-
- 14 Jun, 2018 1 commit
-
-
Kenneth Feng authored
Fix the issue that SCLK&MCLK can't be set higher than dpm7 when OD is enabled in SMU7. v2: fix warning (Alex) Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Acked-by: Rex Zhu<rezhu@amd.com> Signed-off-by:
-
- 13 Jun, 2018 13 commits
-
-
Evan Quan authored
Gfxoff is already enabled in amdgpu_device_ip_set_powergating_state. So, no need to enable it again in pp_late_init. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Evan Quan authored
WARN_ON possible buffer overflow and avoid unnecessary dereference. v2: change BUG_ON to WARN_ON Signed-off-by:
-
Shaoyun Liu authored
The register field hsas been changed in df 3.6, update to correct setting Signed-off-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Acked-by:
-
Rex Zhu authored
As hw required, soc clock must large than mclk, So we set max soc clock to OD Max Memory clk. But on workstation, vbios do not support OD feature, the OD max memory clock is equal to 0. In this case, driver can support underclocking. and set od max memory clock to the value in highest memory dpm level. So the od max memory clock should be less than highest soc clock. and driver should not change the soc clock. caused by commit ca57b9b0a156 ("drm/amd/pp: Allow underclocking when od table is empty in vbios") Reviewed-by: -
Pratik Vishwakarma authored
Fixes stale buffer object (bo) usage for cursor plane Cursor plane's bo operations are handled in DC code. Currently, atomic_commit() does not handle bo operations for cursor plane, as a result the bo assigned for cursor plane in dm_plane_helper_prepare_fb() is not coherent with the updates to the same made in dc code.This mismatch leads to "bo" corruption and hence crashes during S3 entry. This patch cleans up the code which was added as a hack for 4.9 version only. Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Signed-off-by:
-
Colin Ian King authored
The current use of result is or'ing in values and checking for a non-zero result, however, result is not initialized to zero so it potentially contains garbage to start with. Fix this by initializing it to the first return from the call to vega10_program_didt_config_registers. Detected by cppcheck: "(error) Uninitialized variable: result" Fixes: 9b7b8154 ("drm/amd/powerplay: added didt support for vega10") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Evan Quan authored
The clocks should be adjusted after display configuration changed. Otherwise, the socclk and memclk may be forced on an unnecessary higher level. Signed-off-by:
-
Lyude Paul authored
So, unfortunately I recently made the discovery that in the upstream kernel, the only reason that amdgpu is not currently suffering from issues with runtime PM putting the GPU into suspend while it's driving displays is due to the fact that on most prime systems, we have sound devices associated with the GPU that hold their own runtime PM ref for the GPU. What this means however, is that in the event that there isn't any kind of sound device active (which can easily be reproduced by building a kernel with sound drivers disabled), the GPU will fall asleep even when there's displays active. This appears to be in part due to the fact that amdgpu has not actually ever relied on it's rpm_idle() function to be the only thing keeping it running, and normally grabs it's own power references whenever there are displays active (as can be seen with the original pre-DC codepath in amdgpu_display_crtc_set_config() in amdgpu_display.c). This means it's very likely that this bug was introduced during the switch over the DC. So to fix this, we start grabbing runtime PM references every time we enable a previously disabled CRTC in atomic_commit_tail(). This appears to be the correct solution, as it matches up with what i915 does in i915/intel_runtime_pm.c. The one sideaffect of this is that we ignore the variable that the pre-DC code used to use for tracking when it needed runtime PM refs, adev->have_disp_power_ref. This is mainly because there's no way for a driver to tell whether or not all of it's CRTCs are enabled or disabled when we've begun committing an atomic state, as there may be CRTC commits happening in parallel that aren't contained within the atomic state being committed. So, it's safer to just get/put a reference for each CRTC being enabled or disabled in the new atomic state. Signed-off-by:
Lyude Paul <lyude@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>. Reviewed-by:
-
Huang Rui authored
Patch 9667849b: "drm/amd/powerplay: add control gfxoff enabling in late init" from Mar 13, 2018, leads to the following static checker warning: drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c:194 pp_late_init() error: we previously assumed 'hwmgr' could be null (see line 185) drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c This patch fixes the warning to add hwmgr checking. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Huang Rui authored
After defer the execution of clockgating enabling, at that time, gfx already enter into "off" state. Howerver, clockgating enabling will use MMIO to access the gfx registers, then get the gfx hung. So here we should move the gfx powergating and gfxoff enabling behavior at the end of initialization behind clockgating. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
-
Junwei Zhang authored
v2: assign bo_va as well We need to put the lose ends on the invalid list because it is possible that we need to split up huge pages for them. Cc: stable@vger.kernel.org Signed-off-by:
-
Huang Rui authored
The sos ucode version will be changed to align with the value of mmMP0_SMN_C2PMSG_58. Then we add a checking for this. Meanwhile, we have to be compatibility backwards. So it adds serveral recent legacy versions as the white list for the version checking. Signed-off-by:
-
Huang Rui authored
It missed vcn.fw_version setting when init vcn microcode, and it will be used to report vcn ucode version via amdgpu_firmware_info sysfs interface. Signed-off-by:
-
- 08 Jun, 2018 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-06-08-2' of git://anongit.freedesktop.org/drm/drm-intel into drm-next First batch of i915 fixes for v4.18: - gvt fixes that missed v4.17, potentially need to be backported - eDP resolution regression revert - remove broken nv12 special casing - remove stale asserts from find active requests Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-05-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v4.18: Driver changes: - Plug small memory leak in vc4. (anholt) - Depend on MMU in v3d. (arnd) Signed-off-by:
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
A bunch of msm fixes and some atomic work. Signed-off-by:
-
- 07 Jun, 2018 4 commits
-
-
https://github.com/intel/gvt-linuxJani Nikula authored
gvt-fixes-2018-04-19 - cmd parser error path mem leak fix (Colin) - fix dp aux header validation (Changbin) - sanity check on pfn after vfio pin page (Changbin) - fix msi eventfd put (Xiong) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419073948.4mojv7xaxxvfuyud@zhen-hp.sh.intel.com
-
Mahesh Kumar authored
Do not update number of enabled dbuf slices in dev_priv struct until we actually enable/disable dbuf slice in hw. This is leading to never updating dbuf slices and resulting in DBuf slice mismatch warning. Fixes: aa9664ff ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Mahesh Kumar authored
All connectors may not have best_encoder attached, so don't dereference encoder pointer for each connector. Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks") Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We already handle the color encoding mode properly. Remove the broken NV12 special case. Cc: Vidya Srinivas <vidya.srinivas@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 8ed30ab6 ("drm/i915: Enable YUV to RGB for Gen10 in Plane Ctrl Reg") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180521185613.5097-1-ville.syrjala@linux.intel.comReviewed-By:
Vidya Srinivas <vidya.srinivas@intel.com> (cherry picked from commit 012d79e6) Signed-off-by:
-
- 04 Jun, 2018 2 commits
-
-
Sean Paul authored
This patch avoids dereferencing msm_host->dev when it is NULL. If we find ourselves tearing down dsi before calling (mdp4|mdp5|dpu)_kms_init(), we'll end up in a state where the dev pointer is NULL and trying to extract priv from it will fail. This was introduced in a seemingly innocuous commit to ensure the arguments to msm_gem_put_iova() are correct (even though that function has been a stub for ~5 years). Correctness FTW! \o/ Fixes: b01884a286b0 drm/msm: use correct aspace pointer in msm_gem_put_iova() Cc: Daniel Mack <daniel@zonque.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Sean Paul authored
Now that all of the msm-specific goo is tucked safely away we can switch over to using the atomic helper commit directly. \o/ Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Cc: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
