- 08 Mar, 2018 2 commits
-
-
Lionel Landwerlin authored
Up to now, subslice mask was assumed to be uniform across slices. But starting with Cannonlake, slices can be asymmetric (for example slice0 has different number of subslices as slice1+). This change stores all subslices masks for all slices rather than having a single mask that applies to all slices. v2: Rework how we store total numbers in sseu_dev_info (Tvrtko) Fix CHV eu masks, was reading disabled as enabled (Tvrtko) Readability changes (Tvrtko) Add EU index helper (Tvrtko) v3: Turn ALIGN(v, 8) / 8 into DIV_ROUND_UP(v, BITS_PER_BYTE) (Tvrtko) Reuse sseu_eu_idx() for setting eu_mask on CHV (Tvrtko) Reformat debug prints for subslices (Tvrtko) v4: Change eu_mask helper into sseu_set_eus() (Tvrtko) v5: With Haswell reporting masks & counts, bump sseu_*_eus() functions to use u16 (Lionel) v6: Fix sseu_get_eus() for > 8 EUs per subslice (Lionel) v7: Change debugfs enabels for number of subslices per slice, will need a small igt/pm_sseu change (Lionel) Drop subslice_total field from sseu_dev_info, rely on sseu_subslice_total() to recompute the value instead (Lionel) v8: Remove unused function compute_subslice_total() (Lionel) Signed-off-by:Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-2-lionel.g.landwerlin@intel.com
-
Andrew Morton authored
gcc-4.4.4 has problems with initalizers of anon unions. drivers/gpu/drm/i915/intel_guc_log.c: In function 'guc_log_control': drivers/gpu/drm/i915/intel_guc_log.c:64: error: unknown field 'logging_enabled' specified in initializer Work around this. Fixes: 35fe703c ("drm/i915/guc: Change values for i915_guc_log_control") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180308001333.rI2vrNRTY%akpm@linux-foundation.org
-
- 07 Mar, 2018 8 commits
-
-
Rodrigo Vivi authored
"Clock gating bug in GWL may not clear barrier state when an EOT is received, causing a hang the next time that barrier is used." HSDES: 2201832410 Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Rafael Antognolli <rafael.antognolli@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307220912.3681-1-rodrigo.vivi@intel.com
-
Daniele Ceraolo Spurio authored
The main difference with previous GENs is that starting from Gen11 each VCS and VECS engine has its own power well, which only exist if the related engine exists in the HW. The fallback forcewake request workaround is only needed on gen9 according to the HSDES WA entry (1604254524), so we can go back to using the simpler fw_domains_get/put functions. BSpec: 18331 v2: fix fwtable, use array to test shadow tables, create new accessors to avoid check on every access (Tvrtko) v3 (from Paulo): Rebase. v4: - Range 09400-097FF should be FORCEWAKE_ALL (Daniele) - Use the BIT macro for forcewake domains (Daniele) - Add a comment about the range ordering (Oscar) - Updated commit message (Oscar) v5: Rebased v6: Use I915_MAX_VCS/VECS (Michal) v7: translate FORCEWAKE_ALL to available domains v8: rebase, add clarification on fallback ack in commit message. v9: fix rebase issue, change check in fw_domains_init from IS_GEN11 to GEN >= 11 v10: Generate is_genX_shadowed with a macro (Daniele) Include gen11_fw_ranges in the selftest (Michel) v11: Simplify FORCEWAKE_ALL, new line between NEEDS_FORCEWAKEs (Tvrtko) Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by:Michel Thierry <michel.thierry@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Michel Thierry authored
v2: rebased to intel_lr_indirect_ctx_offset v3: rebase, move define to intel_lrc_reg.h BSpec: 11740 Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Thomas Daniel authored
Enhanced Execlists is an upgraded version of execlists which supports up to 8 ports. The lrcs to be submitted are written to a submit queue (the ExecLists Submission Queue - ELSQ), which is then loaded on the HW. When writing to the ELSP register, the lrcs are written cyclically in the queue from position 0 to position 7. Alternatively, it is possible to write directly in the individual positions of the queue using the ELSQC registers. To be able to re-use all the existing code we're using the latter method and we're currently limiting ourself to only using 2 elements. v2: Rebase. v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio). v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio) v5: Reword commit, rename regs to be closer to specs, turn off preemption (Daniele), reuse engine->execlists.elsp (Chris) v6: use has_logical_ring_elsq to differentiate the new paths v7: add preemption support, rename els to submit_reg (Chris) v8: save the ctrl register inside the execlists struct, drop CSB handling updates (superseded by preempt_complete_status) (Chris) v9: s/drm_i915_gem_request/i915_request (Mika) v10: resolved conflict in inject_preempt_context (Mika) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:Thomas Daniel <thomas.daniel@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Starting from Gen11 the context descriptor format has been updated in the HW. The hw_id field has been considerably reduced in size and engine class and instance fields have been added. There is a slight name clashing issue because the field that we call hw_id is actually called SW Context ID in the specs for Gen11+. With the current size of the hw_id field we can have a maximum of 2k contexts at any time, but we could use the sw_counter field (which is sw defined) to increase that because the HW requirement is that engine_id + sw id + sw_counter is a unique number. GuC uses a similar method to support more contexts but does its tracking at lrc level. To avoid doing an implementation that will need to be reworked once GuC support lands, defer it for now and mark it as TODO. v2: rebased, add documentation, fix GEN11_ENGINE_INSTANCE_SHIFT v3: rebased, bring back lost code from i915_gem_context.c v4: make TODO comment more generic v5: be consistent with bit ordering, add extra checks (Chris) Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Oscar Mateo authored
Gen11 has up to 4 VCS and up to 2 VECS engines, this patch adds mmio base definitions for all of them. Bspec: 20944 Bspec: 7021 v2: Set the correct mmio_base in intel_engines_init_mmio; updating the base mmio values any later would cause incorrect reads in i915_gem_sanitize (Michel). Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ceraolo Spurio, Daniele <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Chris Wilson authored
After we call dma_fence_signal(), confirm that the request was indeed complete. Signed-off-by:
-
Maarten Lankhorst authored
If i915.enable_fbc is cleared at runtime, but FBC was previously enabled then we don't disable FBC until the next time the crtc is disabled. Make sure that if the module param is changed, we disable FBC in intel_fbc_post_update so we never have to worry about disabling. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305123608.20665-1-maarten.lankhorst@linux.intel.comReviewed-by:
-
- 06 Mar, 2018 15 commits
-
-
Ville Syrjälä authored
LSPCON likes to throw short HPDs during the enable seqeunce prior to the link being trained. These obviously result in the channel CR/EQ check failing and thus we schedule a pointless hotplug work to retrain the link. Avoid that by ignoring the bad CR/EQ status until we've actually initially trained the link. I've not actually investigated to see what LSPCON is trying to signal with the short pulse. But as long as it signals anything I think we're supposed to check the link status anyway, so I don't really see other good ways to solve this. I've not seen these short pulses being generated by normal DP sinks. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
intel_dp->channel_eq_status is used in exactly one function, and we don't need it to persist between calls. So just go back to using a local variable instead. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Doing link retraining from the short pulse handler is problematic since that might introduce deadlocks with MST sideband processing. Currently we don't retrain MST links from this code, but we want to change that. So better to move the entire thing to the hotplug work. We can utilize the new encoder->hotplug() hook for this. The only thing we leave in the short pulse handler is the link status check. That one still depends on the link parameters stored under intel_dp, so no locking around that but races should be mostly harmless as the actual retraining code will recheck the link state if we end up there by mistake. v2: Rebase due to ->post_hotplug() now being just ->hotplug() Check the connector type to figure out if we should do the HDMI thing or the DP think for DDI [pushed with whitespace changes for sparse] Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: -
Ville Syrjälä authored
The LG 4k TV I have doesn't deassert HPD when I turn the TV off, but when I turn it back on it will pulse the HPD line. By that time it has forgotten everything we told it about scrambling and the clock ratio. Hence if we want to get a picture out if it again we have to tell it whether we're currently sending scrambled data or not. Implement that via the encoder->hotplug() hook. v2: Force a full modeset to not follow the HDMI 2.0 spec more closely (Shashank) [pushed with whitespace fixes to make sparse happy] Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: -
Ville Syrjälä authored
Allow encoders to customize their hotplug processing by moving the intel_hpd_irq_event() code into an encoder hotplug vfunc. Currently only SDVO needs this to re-enable hotplug signalling in the SDVO chip. We'll use this same hook for DP/HDMI link management later. Reviewed-by:
-
Rodrigo Vivi authored
No functional change since WA is already applied. But since it has different names on different databases, let's document it here to avoid future confusion. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306012812.19779-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
No functional change. WA is already properly applied. but in different databases it has different names. Let's document all of them to avoid future confusion. Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
In fact, apply the Cannonlake resolution check for all >= Gen-10 platforms to be safe. v3: Update GLK too. (Ville) Longer variable names. if-else in place of ternary operator. v2: Use local variables for resolution limits and print them (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Elio Martinez Monroy <elio.martinez.monroy@intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Chris Wilson authored
Previously, we would spin waiting for all waiters to wake up and notice their request had completed before we would reset the seqno upon wraparound. However, we can mark their waits as complete and wake them up directly using the existing machinery for handling the flushing of missed wakeups when idling. Suggested-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Since commit fd10e2ce ("drm/i915/breadcrumbs: Ignore unsubmitted signalers"), we cancel the signaler when retiring the request and so upon wraparound, where we wait for all requests to be retired, we no longer need to spin waiting for the signaling thread to release its references to the in-flight requests, and so we can assert that the signaler is idle. References: fd10e2ce ("drm/i915/breadcrumbs: Ignore unsubmitted signalers") Signed-off-by:
-
Chris Wilson authored
When parking the engines and their breadcrumbs, if we have waiters left then they missed their wakeup. Verify that each waiter's seqno did complete. Signed-off-by:
-
Chris Wilson authored
The goal here is to try and reduce the latency of signaling additional requests following the wakeup from interrupt by reducing the list of to-be-signaled requests from an rbtree to a sorted linked list. The original choice of using an rbtree was to facilitate random insertions of request into the signaler while maintaining a sorted list. However, if we assume that most new requests are added when they are submitted, we see those new requests in execution order making a insertion sort fast, and the reduction in overhead of each signaler iteration significant. Since commit 56299fb7 ("drm/i915: Signal first fence from irq handler if complete"), we signal most fences directly from notify_ring() in the interrupt handler greatly reducing the amount of work that actually needs to be done by the signaler kthread. All the thread is then required to do is operate as the bottom-half, cleaning up after the interrupt handler and preparing the next waiter. This includes signaling all later completed fences in a saturated system, but on a mostly idle system we only have to rebuild the wait rbtree in time for the next interrupt. With this de-emphasis of the signaler's role, we want to rejig it's datastructures to reduce the amount of work we require to both setup the signal tree and maintain it on every interrupt. References: 56299fb7 ("drm/i915: Signal first fence from irq handler if complete") Signed-off-by:
-
Daniele Ceraolo Spurio authored
error->device_info.has_guc, which we check in capture_uc_state, is set in capture_gen_state, so the latter needs to be performed first. v2: rebased Reported-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Fixes: 7d41ef34 (drm/i915: Add Guc/HuC firmware details to error state) Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniele Ceraolo Spurio authored
some of the static functions used from capture() have the "i915_" prefix while other don't; most of them take i915 as a parameter, but one of them derives it internally from error->i915. Let's be consistent by avoiding prefix for static functions and by getting i915 from error->i915. While at it, s/dev_priv/i915 in functions that don't perform register reads. v2: take i915 from error->i915 (Michal), s/dev_priv/i915, update commit message Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Daniele Ceraolo Spurio authored
Leftover from Gen8 ringbuffer support removal Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 05 Mar, 2018 4 commits
-
-
Tvrtko Ursulin authored
On Gen11 interrupt masks need to be clear to allow C6 entry. We keep them all enabled knowing that we generate extra interrupts. v2: Rebase. v3: Remove gen 11 extra check in logical_render_ring_init. v4: Rebase fixes. v5: Rebase/refactor. v6: Rebase. v7: Rebase. v8: Update comment and commit message (Daniele) Signed-off-by:
-
Chris Wilson authored
If we fail to acquire a fence when we must, we must unwind before reporting the error. Otherwise, we lose tracking of the vma pinning and eventually hit a bug like <3>[ 46.163202] i915_vma_unpin:333 GEM_BUG_ON(!i915_vma_is_pinned(vma)) <4>[ 46.163424] ------------[ cut here ]------------ <2>[ 46.163429] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:333! <4>[ 46.163444] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI <0>[ 46.163451] Dumping ftrace buffer: <0>[ 46.163457] --------------------------------- <0>[ 46.163630] <...>-84 1.... 46260767us : i915_gem_object_unpin_from_display_plane: i915_vma_unpin:333 GEM_BUG_ON(!i915_vma_is_pinned(vma)) <0>[ 46.163635] --------------------------------- <4>[ 46.163638] Modules linked in: vgem i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers <4>[ 46.163667] CPU: 1 PID: 84 Comm: kworker/u16:1 Tainted: G U 4.16.0-rc3-gc07ef2c77d14-kasan_18+ #1 <4>[ 46.163671] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 <4>[ 46.163743] Workqueue: events_unbound intel_atomic_commit_work [i915] <4>[ 46.163809] RIP: 0010:i915_gem_object_unpin_from_display_plane+0x253/0x2f0 [i915] <4>[ 46.163813] RSP: 0018:ffff8800624cfb48 EFLAGS: 00010286 <4>[ 46.163818] RAX: 000000000000000c RBX: ffff880064446c40 RCX: ffff8800653135b8 <4>[ 46.163822] RDX: dffffc0000000000 RSI: 0000000000000054 RDI: ffff8800651e30d0 <4>[ 46.163825] RBP: 00000000000003d0 R08: 0000000000000001 R09: ffff8800651e3158 <4>[ 46.163829] R10: 0000000000000000 R11: ffff8800651e30f0 R12: 0000000000000001 <4>[ 46.163832] R13: ffff880054c58620 R14: 0000000000000000 R15: dffffc0000000000 <4>[ 46.163836] FS: 0000000000000000(0000) GS:ffff880066040000(0000) knlGS:0000000000000000 <4>[ 46.163840] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 46.163843] CR2: 00007f1fc6fb0000 CR3: 00000000526fe000 CR4: 00000000000006e0 <4>[ 46.163846] Call Trace: <4>[ 46.163918] intel_unpin_fb_vma+0xbd/0x300 [i915] <4>[ 46.163990] intel_cleanup_plane_fb+0x99/0xc0 [i915] <4>[ 46.163998] drm_atomic_helper_cleanup_planes+0x166/0x280 <4>[ 46.164071] intel_atomic_commit_tail+0x1594/0x33a0 [i915] <4>[ 46.164081] ? process_one_work+0x66e/0x1460 <4>[ 46.164151] ? skl_update_crtcs+0x9c0/0x9c0 [i915] <4>[ 46.164157] ? lock_acquire+0x13d/0x390 <4>[ 46.164161] ? lock_acquire+0x13d/0x390 <4>[ 46.164169] process_one_work+0x71a/0x1460 <4>[ 46.164175] ? __schedule+0x838/0x1e50 <4>[ 46.164182] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 <4>[ 46.164188] ? _raw_spin_lock_irq+0xa/0x40 <4>[ 46.164194] worker_thread+0xdf/0xf60 <4>[ 46.164204] ? process_one_work+0x1460/0x1460 <4>[ 46.164209] kthread+0x2cf/0x3c0 <4>[ 46.164213] ? _kthread_create_on_node+0xa0/0xa0 <4>[ 46.164218] ret_from_fork+0x3a/0x50 <4>[ 46.164227] Code: e8 78 d9 cd e8 48 8b 35 cc 9e 47 00 49 c7 c0 c0 31 84 c0 b9 4d 01 00 00 48 c7 c2 e0 80 84 c0 48 c7 c7 0e bb 57 c0 e8 5d 4b df e8 <0f> 0b 48 c7 c1 c0 30 84 c0 ba 4e 01 00 00 48 c7 c6 e0 80 84 c0 <1>[ 46.164368] RIP: i915_gem_object_unpin_from_display_plane+0x253/0x2f0 [i915] RSP: ffff8800624cfb48 Fixes: 85798ac9 ("drm/i915: Fail if we can't get a fence for gen2/3 tiled scanout") Signed-off-by:
-
Mahesh Kumar authored
Platforms before Gen11 were sharing lanes between port-A & port-E. This limitation is no more there. Changes since V1: - optimize the code (Shashank/Jani) - create helper function to get max lanes (ville) Changes since V2: - Include BIOS fail fix-up in same helper function (ville) Changes since V3: - remove confusing if/else (jani) - group intel_encoder initialization Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:
-
- 02 Mar, 2018 11 commits
-
-
Michal Wajdeczko authored
If we fail to authenticate HuC firmware, we should change its load status to FAIL. While around, print HUC_STATUS on firmware verification failure. v2: keep the variables sorted by length (Chris) Signed-off-by:
-
Michal Wajdeczko authored
We want to use higher level 'uc' functions as the main entry points to the GuC/HuC code to hide some details and keep code layered. While here, move call to disable_guc_interrupts after sending suspend action to the GuC to allow it work also with CTB as comm mechanism. v2: update commit msg (Sagar) Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Chris Wilson authored
During reset/wedging, we have to clean up the requests on the timeline and flush the pending interrupt state. Currently, we are abusing the irq disabling of the timeline spinlock to protect the irq state in conjunction to the engine's timeline requests, but this is accidental and conflates the spinlock with the irq state. A baffling state of affairs for the reader. Instead, explicitly disable irqs over the critical section, and separate modifying the irq state from the timeline's requests. Suggested-by:
-
Chris Wilson authored
Although this state (execlists->active and engine->irq_posted) itself is not protected by the engine->timeline spinlock, it does conveniently ensure that irqs are disabled. We can use this to protect our manipulation of the state and so ensure that the next IRQ to arrive sees consistent state and (hopefully) ignores the reset engine. Suggested-by:
-
Chris Wilson authored
After staring hard at sequences like [ 28.199013] systemd-1 2..s. 26062228us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0?], tail=1 [1?] [ 28.199095] systemd-1 2..s. 26062229us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000, active=0x1 [ 28.199177] systemd-1 2..s. 26062230us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.1, seqno=3, prio=-1024 [ 28.199258] systemd-1 2..s. 26062231us : execlists_submission_tasklet: rcs0 completed ctx=0 [ 28.199340] gem_eio-829 1..s1 26066853us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.1, seqno=1, prio=0 [ 28.199421] <idle>-0 2..s. 26066863us : execlists_submission_tasklet: rcs0 cs-irq head=1 [1?], tail=2 [2?] [ 28.199503] <idle>-0 2..s. 26066865us : execlists_submission_tasklet: rcs0 csb[2]: status=0x00000001:0x00000000, active=0x1 [ 28.199585] gem_eio-829 1..s1 26067077us : execlists_submission_tasklet: rcs0 in[1]: ctx=3.1, seqno=2, prio=0 [ 28.199667] gem_eio-829 1..s1 26067078us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.2, seqno=1, prio=0 [ 28.199749] <idle>-0 2..s. 26067084us : execlists_submission_tasklet: rcs0 cs-irq head=2 [2?], tail=3 [3?] [ 28.199830] <idle>-0 2..s. 26067085us : execlists_submission_tasklet: rcs0 csb[3]: status=0x00008002:0x00000001, active=0x1 [ 28.199912] <idle>-0 2..s. 26067086us : execlists_submission_tasklet: rcs0 out[0]: ctx=1.2, seqno=1, prio=0 [ 28.199994] gem_eio-829 2..s. 28246084us : execlists_submission_tasklet: rcs0 cs-irq head=3 [3?], tail=4 [4?] [ 28.200096] gem_eio-829 2..s. 28246088us : execlists_submission_tasklet: rcs0 csb[4]: status=0x00000014:0x00000001, active=0x5 [ 28.200178] gem_eio-829 2..s. 28246089us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0, prio=0 [ 28.200260] gem_eio-829 2..s. 28246127us : execlists_submission_tasklet: execlists_submission_tasklet:886 GEM_BUG_ON(buf[2 * head + 1] != port->context_id) the conclusion is that the only place where the ports are reset to zero, is from engine->cancel_requests called during i915_gem_set_wedged(). The race is horrible as it results from calling set-wedged on active HW (the GPU reset failed) and as such we need to be careful as the HW state changes beneath us. Fortunately, it's the same scary conditions as affect normal reset, so we can reuse the same machinery to disable state tracking as we clobber it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104945Signed-off-by:
-
Ville Syrjälä authored
We have two instances of the code to fill out the header for the aux message. Pull it into a small helper. v2: Rebase due to txbuf[] changes Cc: Sean Paul <seanpaul@chromium.org> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com>
-
Ville Syrjälä authored
Let's try to keep the details on the AKSV stuff concentrated in one place. So move the control bit and +5 data size handling there. v2: Increase txbuf[] to include the payload which intel_dp_aux_xfer() will still load into the registers even though the hardware will ignore it Cc: Sean Paul <seanpaul@chromium.org> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: -
Ville Syrjälä authored
Rename intel_dp_aux_ch() to intel_dp_aux_xfer() to better convey what it actually does. Signed-off-by:
-
Imre Deak authored
Enabling FBC on a plane having a Y-offset that isn't divisible by 4 may cause pipe FIFO underruns and flickers, so disable FBC on such a config. I tried the followings to work around the issue: - enable each HW work around in ILK_DPFC_CHICKEN - disable each compression algorithm in ILK_DPFC_CONTROL - disable low-power watermarks None of the above got rid of the problem. I haven't found this issue in the Bspec/WA database either. Besides the igt testcase below (yet to be merged) an easy way to reproduce the issue is to enable a plane with FBC and a plane Y-offset not aligned to 4 and then just enable/disable FBC in a loop, keeping the plane enabled. I could trigger the problem on BXT/GLK/SKL/CNL, so assume for now that it's only present on GEN9 and GEN10. v2: (Ville) - Run the test/apply the WA on CNL as well. - Use IS_GEN() instead of INTEL_GEN(). - Fix spelling. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Testcase: igt/kms_plane/plane-clipping-pipe-A-planes Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
In decimal its just a weird big number, while in hex can actually log which engines were requested to be wedged. Signed-off-by:
-
Sagar Arun Kamble authored
GuC load function is named intel_guc_fw_upload() and HuC load function is named intel_huc_init_hw(). Make them consistent intel_*_fw_upload. Also move HuC fw loading functions and declarations to separate files intel_huc_fw.c|h like GuC. While at this, do below changes 1. Update kernel-doc comment for intel_*_fw_upload() functions 2. s/huc_ucode_xfer/huc_fw_xfer 3. Introduce intel_huc_fw_init_early() v2: Changed patch to update HuC functions instead of changing guc_fw_upload and update file structure. (Michal Wajdeczko) v3: Added SPDX License identifier to huc_fw.c|h. (Michal Wajdeczko) Signed-off-by:
-
