- 14 May, 2012 40 commits
-
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Just a small cleanup. Signed-off-by:
-
Hans de Goede authored
This is necessary to ensure that worker-threads accessing the device are stopped before our disconnect handler returns. This causes a problem with stream_off calling sd_stop0 a second time when the device handle is closed. This is fixed by setting gscpa_dev->streaming to 0 on disconnect. Note that now stream_off will never be called on a disconnected device, and the present check can thus be removed from stream_off. Signed-off-by:
-
Hans de Goede authored
So that we don't start a read stream when an app is only polling for control events. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans Verkuil authored
Due to latency concerns the VIDIOC_QBUF, DQBUF and QUERYBUF do not use the core lock, instead they rely only on queue_lock. Changes by HdG: 1) Change release from the video_device to the v4l2_device, to avoid a race on disconnect. 2) Adjust for the V4L2 core changes which cause non ioctl fops to no longer take the V4L2 core lock. [mchehab@redhat.com: fix a merge conflict] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
There are two bugs here: first the calls to stop0 (in gspca_suspend) and gspca_init_transfer (in gspca_resume) need to be called with the usb_lock held. That's true for the other places they are called and it is what subdrivers expect. Quite a few will unlock the usb_lock in stop0 while waiting for a worker thread to finish, and if usb_lock isn't held then that can cause a kernel oops. The other problem is that a worker thread needs to detect that it has to halt due to a suspend. Otherwise it will just go on looping. So add tests against gspca_dev->frozen in the worker threads that need it. Hdg, 2 minor changes: 1) The finepix device is ok with stopping reading a frame halfway through, so add frozen checks in all places where we also check if we're still streaming 2) Use gspca_dev->dev instead of gspca_dev->present to check for disconnect in all touched drivers. I plan to do this everywhere in the future, and most relevant lines in the touched drivers are already modified by this patch. Signed-off-by:
-
Hans Verkuil authored
Add V4L2_CAP_DEVICE_CAPS support to querycap and replace -EINVAL by -ENOTTY whenever an ioctl is not supported. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
In order to support control event gspca has to use struct v4l2_fh. As a bonus feature this also gives priority handling for free. Signed-off-by:
-
Hans Verkuil authored
Prepare for control events: free up file->private_data by using video_drvdata(file) to get to the gspca_dev struct. [mchehab@redhat.com: fix a compile error: ‘file’ undeclared] Signed-off-by:
-
Hans Verkuil authored
Make the necessary changes to allow subdrivers to use the control framework. This does not add control event support, that comes later. It add a init_control cam_op that is called after init in probe that allows the subdriver to set up the controls. HdG: Call v4l2_ctrl_handler_setup from resume instead of gspca_set_default_mode, as we just want to resend the current ctrl values to the device. Signed-off-by:
-
Hans de Goede authored
My last locking rework for pwc mistakenly assumed that videbuf2 does its own locking, but it does not! This patch fixes the missing locking by moving over the the video_device lock, and introducing a separate lock for the videobuf2_queue. Signed-off-by:
-
Hans de Goede authored
Various error paths in fileio_init where not setting the request-count to 0 when unrequesting the buffers on error to init the fileio emulation. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This used to be the default if the lock pointer was set, but now that lock is by default only used for ioctl serialization. Those drivers that already used core locking have this flag set explicitly, except for some drivers where it was obvious that there was no need to serialize any file operations other than ioctl. The drivers that didn't need this flag were: drivers/media/radio/dsbr100.c drivers/media/radio/radio-isa.c drivers/media/radio/radio-keene.c drivers/media/radio/radio-miropcm20.c drivers/media/radio/radio-mr800.c drivers/media/radio/radio-tea5764.c drivers/media/radio/radio-timb.c drivers/media/video/vivi.c sound/i2c/other/tea575x-tuner.c The other drivers that use core locking and where it was not immediately obvious that this flag wasn't needed were changed so that the flag is set together with a comment that that driver needs work to avoid having to set that flag. This will often involve taking the core lock in the fops themselves. Eventually this flag should go and it should not be used in new drivers. There are a few reasons why we want to avoid core locking of non-ioctl fops: in the case of mmap this can lead to a deadlock in rare situations since when mmap is called the mmap_sem is held and it is possible for other parts of the code to take that lock as well (copy_from_user()/copy_to_user() perform a down_read(&mm->mmap_sem) when a page fault occurs). It is very unlikely that that happens since the core lock serializes all fops, but the kernel warns about it if lock validation is turned on. For poll it is also undesirable to take the core lock as that can introduce increased latency. The same is true for read/write. While it was possible to make flags or something to turn on/off taking the core lock for each file operation, in practice it is much simpler to just not take it at all except for ioctl and leave it to the driver to take the lock. There are only a handful fops compared to the zillion ioctls we have. I also wanted to make it obvious which drivers still take the lock for all fops, so that's why I chose to have drivers set it explicitly. Signed-off-by:
-
Hans Verkuil authored
Rather than checking the priority for each ioctl that needs to, just mark such ioctls in the table and do it only once. Signed-off-by:
-
Hans Verkuil authored
The tea575x-tuner framework can support the VIDIOC_S_HW_FREQ_SEEK for only some of the tea575x-based boards. Mark this ioctl as invalid if the board doesn't support it. This fixes an issue with S_HW_FREQ_SEEK in combination with priority handling: since the priority check is done first it could return -EBUSY, even though calling the S_HW_FREQ_SEEK ioctl would return -ENOTTY. It should always return ENOTTY in such a case. Signed-off-by:
-
Hans Verkuil authored
Rather than testing whether an ioctl is implemented in the driver or not every time the ioctl is called, do it upfront when the device is registered. This also allows a driver to disable certain ioctls based on the capabilities of the detected board, something you can't do today without creating separate v4l2_ioctl_ops structs for each new variation. For the most part it is pretty straightforward, but for control ioctls a flag is needed since it is possible that you have per-filehandle controls, and that can't be determined upfront of course. Signed-off-by:
-
Hans Verkuil authored
Using the V4L2 core lock is a very robust method that is usually very good at doing the right thing. But some drivers, particularly USB drivers, may want to prevent the core from taking the lock for specific ioctls, particularly buffer queuing ioctls. The reason is that certain commands like S_CTRL can take a long time to process over USB and all the time the core has the lock, preventing VIDIOC_DQBUF from proceeding, even though a frame may be ready in the queue. This introduces unwanted latency. Since the buffer queuing commands often have their own internal lock it is often not necessary to take the core lock. Drivers can now say that they don't want the core to take the lock for specific ioctls. As it is a specific opt-out it makes it clear to the reviewer that those ioctls will need more care when reviewing. Signed-off-by:
-
Sakari Ailus authored
Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as three subdevs, pixel array, binner and scaler --- in case the device has a scaler. Currently it relies on the board code for external clock handling. There is no fast way out of this dependency before the ISP drivers (omap3isp) among others will be able to export that clock through the clock framework instead. Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Calculate PLL configuration based on input data: sensor configuration, board properties and sensor-specific limits. [mchehab@redhat.com: Fix a Kconfig conflict affecting APTINA_PLL] Signed-off-by:
-
Sakari Ailus authored
Perform CCDC link validation in ccdc_link_validate() instead of isp_video_validate_pipeline(). Also perform maximum data rate check in isp_video_check_external_subdevs(). Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Sakari Ailus authored
Use default link validation for ccp2, csi2, preview and resizer. On ccp2, csi2 and ccdc we also collect information on external subdevs as one may be connected to those entities. Signed-off-by:
-
Sakari Ailus authored
Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove means to set the value for isp_ccdc_vpcfg.pixelclk. Signed-off-by:
-
Sakari Ailus authored
isp_video_check_external_subdevs() will retrieve external subdev's bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon time. isp_video_check_external_subdevs() is called after pipeline validation. Signed-off-by:
-
Sakari Ailus authored
Add pointer to external subdev, pixel rate of the external subdev and bpp of the format to struct isp_pipeline. Signed-off-by:
-
Sakari Ailus authored
Collect information on entities in pipeline in isp_video_far_end(), outside pipeline validation. As this causes the function to have side effects, rename the function accordingly. Signed-off-by:
-
Sakari Ailus authored
Add lane configuration (order of clock and data lane) to platform data on both CCP2 and CSI-2. Signed-off-by:
-
Sakari Ailus authored
Since media_entity_pipeline_start() now does link validation, it may actually fail. Perform the error handling. Signed-off-by:
-
Sakari Ailus authored
The clock rate for l3_ick will soon be read during pipeline validation which is now part of media_entity_pipeline_start(). For that reason we set constraints earlier on. Signed-off-by:
-
Sakari Ailus authored
XCLK definitions are often required by the board code. Move them to public include file. Signed-off-by:
-
Sakari Ailus authored
This also prevents accessing NULL pointer in csi2_try_format(). Signed-off-by:
-
Sakari Ailus authored
Allow choosing the lock used by the control handler. This may be handy sometimes when a driver providing multiple subdevs does not want to use several locks to serialise its functions. Signed-off-by:
-
Sakari Ailus authored
v4l2_subdev_link_validate() is the default op for validating a link. In V4L2 subdev context, it is used to call a pad op which performs the proper link check without much extra work. Signed-off-by:
-
Sakari Ailus authored
Document that format related configuration is done through pad ops in case the driver does use the media framework. Signed-off-by:
-
Sakari Ailus authored
The purpose of the link_validate() op is to allow an entity driver to ensure that the properties of the pads at the both ends of the link are suitable for starting the pipeline. link_validate is called on sink pads on active links which belong to the active part of the graph. Signed-off-by:
-
Sakari Ailus authored
Add three other colour orders for 10-bit to 8-bit DPCM compressed raw bayer pixel formats. Signed-off-by:
-
Sakari Ailus authored
Document guidelines how 4CC codes should be named. Only raw bayer is included currently. Other formats should be documented later on. Signed-off-by:
-
Sakari Ailus authored
Add control class for image processing controls. The control class deals with controls processing image, for example digital gain or noise filtering, which can be present in any part of the pipeline. Signed-off-by:
-
