Skip to content

L
linux
Switch branch/tag
  1. 04 Jan, 2006 8 commits
    • matthieu castet's avatar
      [PATCH] USB: Eagle and ADI 930 usb adsl modem driver fix · 8d7802ed
      matthieu castet authored 
      More care on loading firmware, take into account fw->size can't be zero.
Signed-off-by: default avatarMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8d7802ed
    • matthieu castet's avatar
      [PATCH] USB: Eagle and ADI 930 usb adsl modem driver · b72458a8
      matthieu castet authored 
      A driver for USB ADSL modems based on the ADI eagle chipset using the
usb_atm infrastructure.

The managing part was taken from bsd ueagle driver, other parts were
written from scratch.

The driver uses the in-kernel firmware loader :
- to load  a first usb firmware when the modem is in pre-firmware state
- to load the dsp firmware that are swapped in host memory.
- to load CMV (configuration and management variables) when the modem
boot. (We can't use options or sysfs for this as there many possible
values. See
https://mail.gna.org/public/eagleusb-dev/2005-04/msg00031.html for a
description of some)
- to load fpga code for 930 chipset.

The device had 4 endpoints :
* 2 for data (use by usbatm). The incoming
endpoint could be iso or bulk. The modem seems buggy and produce lot's
of atm errors when using it in bulk mode for speed > 3Mbps, so iso
endpoint is need for speed > 3Mbps. At the moment iso endpoint need a
patched usbatm library and for this reason is not included in this patch.

* One bulk endpoint for uploading dsp firmware

* One irq endpoint that notices the driver
    - if we need to upload a page of the dsp firmware
    - an ack for read or write CMV and the value (for the read case).

If order to make the driver cleaner, we design synchronous
(read|write)_cmv :
-send a synchronous control message to the modem
-wait for an ack or a timeout
-return the value if needed.

In order to run these synchronous usb messages we need a kernel thread.

The driver has been tested  with sagem fast 800 modems with different
eagle chipset revision and with ADI 930 since April 2005.
Signed-off-by: default avatarMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b72458a8
    • Alan Stern's avatar
      [PATCH] USB: EHCI: fix conflation of buf == 0 with len == 0 · 6912354a
      Alan Stern authored 
      When the ehci-hcd driver prepares a control URB, it tests for a
zero-length data stage by looking at the transfer_dma value instead of
the transfer_buffer_length.  (In fact it does this even for non-control
URBs, which is an additional aspect of the same bug.)

However, under certain circumstances it's possible for transfer_dma to
be 0 while transfer_buffer_length is non-zero.  This can happen when a
freshly allocated page (mapped to address 0 and marked Copy-On-Write,
but never written to) is used as the source buffer for an OUT transfer.
This patch (as598) fixes the problem.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      6912354a
    • Olav Kongas's avatar
      [PATCH] USB: isp116x-hcd: cleanup · 959eea21
      Olav Kongas authored 
      The attached patch makes a cleanup of isp116x-hcd. Most of the volume of
the patch comes from 2 sources: moving the code around to get rid of a
few function prototypes and reworking register dumping functions/macros.
Among other things, switched over from using procfs to debugfs.

Cleanup. The following changes were made:

- Rework register dumping code so it can be used for dumping
  to both syslog and debugfs.
- Switch from procfs to debugfs..
- Die gracefully on Unrecoverable Error interrupt.
- Fix memory leak in isp116x_urb_enqueue(), if HC happens to
  die in a narrow time window.
- Fix a 'sparce' warning (unnecessary cast).
- Report Devices Removable for root hub ports by default
  (was Devices Permanently Attached).
- Move bus suspend/resume functions down in code to get rid of
  a few function prototypes.
- A number of one-line cleanups.
- Add an entry to MAINTAINERS.
Signed-off-by: default avatarOlav Kongas <ok@artecdesign.ee>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>

 MAINTAINERS                    |    6
 drivers/usb/host/isp116x-hcd.c |  429 ++++++++++++++++-------------------------
 drivers/usb/host/isp116x.h     |   83 +++++--
 3 files changed, 230 insertions(+), 288 deletions(-)
      959eea21
    • Olav Kongas's avatar
      [PATCH] USB: isp116x-hcd: support reiniting HC on resume · 535488fc
      Olav Kongas authored 
      Until now the isp116x-hcd had no support to reinitialize the HC on
resume, if the controller lost its state during suspend. This patch,
generated against your Oct 26 git tree, adds that support. The patch is
basically the same as the one tested by Ivan Kalatchev, who reported the
problem, on 2.6.13.

Please apply,

Support reinitializing the isp116x host controller from scratch on
resume, if the controller has lost its state.
Signed-off-by: default avatarOlav Kongas <ok@artecdesign.ee>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      535488fc
    • David Kubicek's avatar
      [PATCH] USB: Converting cdc acm to a ring queue · 61a87adf
      David Kubicek authored 
      this patch by David converts the sending queue of the CDC ACM driver
to a queue of URBs. This is needed for quicker devices. Please apply.
Signed-Off-By: default avatarOliver Neukum <oliver@neukum.name>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/class/cdc-acm.c |  229 ++++++++++++++++++++++++++++++--------------
 drivers/usb/class/cdc-acm.h |   33 +++++-
 2 files changed, 185 insertions(+), 77 deletions(-)
      61a87adf
    • Richard Purdie's avatar
      [PATCH] USB: Add pxa27x OHCI PM functions · 2e1dcc16
      Richard Purdie authored 
      Add power management functions for the pxa27x USB OHCI host controller.
This is a totally rewritten version of the patch by Nicolas Pitre and
Todd Poynor which accounts for recent USB changes.
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      2e1dcc16
    • Richard Purdie's avatar
      [PATCH] USB: pxa27x OHCI - Separate platform code from main driver · 81f280e2
      Richard Purdie authored 
      To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.

This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarNicolas Pitre <nico@cam.org>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      81f280e2
  3. 03 Jan, 2006 2 commits
  5. 02 Jan, 2006 2 commits
    • Dag-Erling Smrgrav's avatar
      [PATCH] Avoid namespace pollution in <asm/param.h> · abe842eb
      Dag-Erling Smrgrav authored 
      In commit 3D59121003721a8fad11ee72e646fd9d3076b5679c, the x86 and x86-64
<asm/param.h> was changed to include <linux/config.h> for the
configurable timer frequency.

However, asm/param.h is sometimes used in userland (it is included
indirectly from <sys/param.h>), so your commit pollutes the userland
namespace with tons of CONFIG_FOO macros.  This greatly confuses
software packages (such as BusyBox) which use CONFIG_FOO macros
themselves to control the inclusion of optional features.

After a short exchange, Christoph approved this patch
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      abe842eb
    • Benjamin Herrenschmidt's avatar
      [PATCH] powerpc: more g5 overtemp problem fix · f12f4d90
      Benjamin Herrenschmidt authored 
      Some G5s still occasionally experience shutdowns due to overtemp
conditions despite the recent fix. After analyzing logs from such
machines, it appears that the overtemp code is a bit too quick at
shutting the machine down when reaching the critical temperature (tmax +
8) and doesn't leave the fan enough time to actually cool it down. This
happens if the temperature of a CPU suddenly rises too high in a very
short period of time, or occasionally on boot (that is the CPUs are
already overtemp by the time the driver loads).

This patches makes the code a bit more relaxed, leaving a few seconds to
the fans to do their job before kicking the machine shutown.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      f12f4d90
  7. 01 Jan, 2006 2 commits
  9. 31 Dec, 2005 3 commits
    • Linus Torvalds's avatar
      Merge master.kernel.org:/home/rmk/linux-2.6-serial · 35f349ee
      Linus Torvalds authored
      35f349ee
    • Yi Yang's avatar
      [PATCH] Fix false old value return of sysctl · 82c9df82
      Yi Yang authored 
      For the sysctl syscall, if the user wants to get the old value of a
sysctl entry and set a new value for it in the same syscall, the old
value is always overwritten by the new value if the sysctl entry is of
string type and if the user sets its strategy to sysctl_string.  This
issue lies in the strategy being run twice if the strategy is set to
sysctl_string, the general strategy sysctl_string always returns 0 if
success.

Such strategy routines as sysctl_jiffies and sysctl_jiffies_ms return 1
because they do read and write for the sysctl entry.

The strategy routine sysctl_string return 0 although it actually read
and write the sysctl entry.

According to my analysis, if a strategy routine do read and write, it
should return 1, if it just does some necessary check but not read and
write, it should return 0, for example sysctl_intvec.
Signed-off-by: default avatarYi Yang <yang.y.yi@gmail.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      82c9df82
    • Linus Torvalds's avatar
      sysctl: don't overflow the user-supplied buffer with '\0' · 8febdd85
      Linus Torvalds authored 
      If the string was too long to fit in the user-supplied buffer,
the sysctl layer would zero-terminate it by writing past the
end of the buffer. Don't do that.

Noticed by Yi Yang <yang.y.yi@gmail.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      8febdd85
  11. 30 Dec, 2005 5 commits
  13. 29 Dec, 2005 14 commits
  15. 28 Dec, 2005 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7