- 19 Sep, 2016 1 commit
-
-
Alexander Shishkin authored
The Intel PT facility grew some new functionality: * PTWRITE packet carries the payload of the new PTWRITE instruction that can be used to instrument Intel PT traces with user-supplied data. Packets of this type are only generated if 'ptwrite' capability is set and PTWEn bit is set in the event attribute's config. Flow update packets (FUP) can be generated on PTWRITE packets if FUPonPTW config bit is set. Setting these bits is not allowed if 'ptwrite' capability is not set. * PWRE, PWRX, MWAIT, EXSTOP packets communicate core power management events. These depend on 'power_event_tracing' capability and are enabled by setting PwrEvtEn bit in the event attribute. Extend the driver capabilities and provide the proper sanity checks in the event validation function. [ tglx: Massaged changelog ] Signed-off-by:Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: vince@deater.net Cc: eranian@google.com Cc: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/20160916134819.1978-1-alexander.shishkin@linux.intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 10 Sep, 2016 9 commits
-
-
Kan Liang authored
This patch implements the uncore monitoring driver for Skylake server. The uncore subsystem in Skylake server is similar to previous server. There are some differences in config register encoding and pci device IDs. Besides, Skylake introduces many new boxes to reflect the MESH architecture changes. The control registers for IIO and UPI have been extended to 64 bit. This patch also introduces event_mask_ext to handle the high 32 bit mask. The CHA box number could vary for different machines. This patch gets the CHA box number by counting the CHA register space during initialization at runtime. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471378190-17276-3-git-send-email-kan.liang@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Harry Pan authored
This patch enables RAPL counters (energy consumption counters) support for Intel Apollo Lake (Goldmont) processors (Model 92): RAPL of Goldmont, unlikes ESU increment of Silvermont/Airmont, it likes the Haswell microarchitecture in 1/2^ESU joules and supports power domains in PP0/PP1/PKG/RAM. ESU and power domains refer to Intel Software Developers' Manual, Vol. 3C, Order No. 325384, Table 35-12. Usage example: $ perf list $ perf stat -a -e power/energy-cores/,power/energy-pkg/ sleep 10 Signed-off-by:
Harry Pan <harry.pan@intel.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Peter Zijlstra authored
Alexander hit the WARN_ON_ONCE(!event) on his Skylake while running the perf fuzzer. This means the PEBSv3 record included a status bit for an inactive event, something that _should_ not happen. Move the code that filters the status bits against our known PEBS events up a spot to guarantee we only deal with events we know about. Further add "continue" statements to the WARN_ON_ONCE()s such that we'll not die nor generate silly events in case we ever do hit them again. Reported-by:
-
Alexander Shishkin authored
At the moment, intel_bts will WARN() out if there is more than one event writing to the same ring buffer, via SET_OUTPUT, and will only send data from one event to a buffer. There is no reason to have this warning in, so kill it. Signed-off-by:
-
Alexander Shishkin authored
Since BTS doesn't have a dedicated PMI status bit, the driver needs to take extra care to check for the condition that triggers it to avoid spurious NMI warnings. Regardless of the local BTS context state, the only way of knowing that the NMI is ours is to compare the write pointer against the interrupt threshold. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
-
Alexander Shishkin authored
The intel_bts driver is using a CPU-local 'started' variable to order callbacks and PMIs and make sure that AUX transactions don't get messed up. However, the ordering rules in regard to this variable is a complete mess, which recently resulted in perf_fuzzer-triggered warnings and panics. The general ordering rule that is patch is enforcing is that this cpu-local variable be set only when the cpu-local AUX transaction is active; consequently, this variable is to be checked before the AUX related bits can be touched. Reported-by:
-
Alexander Shishkin authored
The order of accesses to ring buffer's aux_mmap_count and aux_refcount has to be preserved across the users, namely perf_mmap_close() and perf_aux_output_begin(), otherwise the inversion can result in the latter holding the last reference to the aux buffer and subsequently free'ing it in atomic context, triggering a warning. > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130 > CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596 > Call Trace: > [<ffffffff810f3e0b>] __warn+0xcb/0xf0 > [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20 > [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130 > [<ffffffff812127a8>] rb_free_aux+0x18/0x20 > [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0 > [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0 > [<ffffffff8100c42d>] bts_event_add+0x5d/0x80 > [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0 > [<ffffffff8120652e>] group_sched_in+0x6e/0x190 > [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0 > [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80 > [<ffffffff81206d1b>] ctx_resched+0x5b/0x90 > [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240 > [<ffffffff81200639>] event_function+0xa9/0x180 > [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70 > [<ffffffff8120203f>] remote_function+0x3f/0x50 > [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150 > [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60 > [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40 > [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90 > [<ffffffff81120056>] finish_task_switch+0xa6/0x210 > [<ffffffff81120017>] ? finish_task_switch+0x67/0x210 > [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50 > [<ffffffff81a1efe5>] schedule+0x35/0x80 > [<ffffffff81128031>] sys_sched_yield+0x61/0x70 > [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8 > ---[ end trace 6235f556f5ea83a9 ]--- This patch puts the checks in perf_aux_output_begin() in the same order as that of perf_mmap_close(). Reported-by:
-
Alexander Shishkin authored
In the mmap_close() path we need to stop all the AUX events that are writing data to the AUX area that we are unmapping, before we can safely free the pages. To determine if an event needs to be stopped, we're comparing its ->rb against the one that's getting unmapped. However, a SET_OUTPUT ioctl may turn up inside an AUX transaction and swizzle event::rb to some other ring buffer, but the transaction will keep writing data to the old ring buffer until the event gets scheduled out. At this point, mmap_close() will skip over such an event and will proceed to free the AUX area, while it's still being used by this event, which will set off a warning in the mmap_close() path and cause a memory corruption. To avoid this, always stop an AUX event before its ->rb is updated; this will release the (potentially) last reference on the AUX area of the buffer. If the event gets restarted, its new ring buffer will be used. If another SET_OUTPUT comes and switches it back to the old ring buffer that's getting unmapped, it's also fine: this ring buffer's aux_mmap_count will be zero and AUX transactions won't start any more. Reported-by:
-
- 09 Sep, 2016 2 commits
-
-
Sebastian Andrzej Siewior authored
The resent conversion of the cpu hotplug support in the uncore driver introduced a regression due to the way the callbacks are invoked at initialization time. The old code called the prepare/starting/online function on each online cpu as a block. The new code registers the hotplug callbacks in the core for each state. The core invokes the callbacks at each registration on all online cpus. The code implicitely relied on the prepare/starting/online callbacks being called as combo on a particular cpu, which was not obvious and completely undocumented. The resulting subtle wreckage happens due to the way how the uncore code manages shared data structures for cpus which share an uncore resource in hardware. The sharing is determined in the cpu starting callback, but the prepare callback allocates per cpu data for the upcoming cpu because potential sharing is unknown at this point. If the starting callback finds a online cpu which shares the hardware resource it takes a refcount on the percpu data of that cpu and puts the own data structure into a 'free_at_online' pointer of that shared data structure. The online callback frees that. With the old model this worked because in a starting callback only one non unused structure (the one of the starting cpu) was available. The new code allocates the data structures for all cpus when the prepare callback is registered. Now the starting function iterates through all online cpus and looks for a data structure (skipping its own) which has a matching hardware id. The id member of the data structure is initialized to 0, but the hardware id can be 0 as well. The resulting wreckage is: CPU0 finds a matching id on CPU1, takes a refcount on CPU1 data and puts its own data structure into CPU1s data structure to be freed. CPU1 skips CPU0 because the data structure is its allegedly unsued own. It finds a matching id on CPU2, takes a refcount on CPU1 data and puts its own data structure into CPU2s data structure to be freed. .... Now the online callbacks are invoked. CPU0 has a pointer to CPU1s data and frees the original CPU0 data. So far so good. CPU1 has a pointer to CPU2s data and frees the original CPU1 data, which is still referenced by CPU0 ---> Booom So there are two issues to be solved here: 1) The id field must be initialized at allocation time to a value which cannot be a valid hardware id, i.e. -1 This prevents the above scenario, but now CPU1 and CPU2 both stick their own data structure into the free_at_online pointer of CPU0. So we leak CPU1s data structure. 2) Fix the memory leak described in #1 Instead of having a single pointer, use a hlist to enqueue the superflous data structures which are then freed by the first cpu invoking the online callback. Ideally we should know the sharing _before_ invoking the prepare callback, but that's way beyond the scope of this bug fix. [ tglx: Rewrote changelog ] Fixes: 96b2bd38 ("perf/x86/amd/uncore: Convert to hotplug state machine") Reported-and-tested-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20160909160822.lowgmkdwms2dheyv@linutronix.deSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20160908' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Add branch stack / basic block info to 'perf annotate --stdio', where for each branch, we add an asm comment after the instruction with information on how often it was taken and predicted. See example with color output at: http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png (Peter Zijlstra) - Only open an evsel in CPUs in its cpu map, fixing some use cases in systems with multiple PMUs with different CPU maps (Mark Rutland) - Fix handling of huge TLB maps, recognizing it as anonymous (Wang Nan) Infrastructure changes: - Remove the symbol filtering code, i.e. the callbacks passed to all functions that could end up loading a DSO symtab, simplifying the code, eventually allowing what we should have had since day one: removing the 'map' parameter from dso__load() functions (Arnaldo Carvalho de Melo) Arch specific build fixes: - Fix detached tarball build on powerpc, where we were still accessing a file outside tools/ (Ravi Bangoria) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
- 08 Sep, 2016 7 commits
-
-
Ravi Bangoria authored
'make -C tools/perf build-test' is failing with below log for poewrpc. In file included from /tmp/tmp.3eEwmGlYaF/perf-4.8.0-rc4/tools/perf/perf.h:15:0, from util/cpumap.h:8, from util/env.c:1: /tmp/tmp.3eEwmGlYaF/perf-4.8.0-rc4/tools/perf/perf-sys.h:23:56: fatal error: ../../arch/powerpc/include/uapi/asm/unistd.h: No such file or directory compilation terminated. I bisected it and found it's failing from commit ad430729 ("Remove: kernel unistd*h files from perf's MANIFEST, not used"). Header file '../../arch/powerpc/include/uapi/asm/unistd.h' is included only for powerpc in tools/perf/perf-sys.h. By looking closly at commit history, I found little weird thing: Commit f2d9cae9 ("perf powerpc: Use uapi/unistd.h to fix build error") replaced 'asm/unistd.h' with 'uapi/asm/unistd.h' Commit d2709c7c ("perf: Make perf build for x86 with UAPI disintegration applied") removes all arch specific 'uapi/asm/unistd.h' for all archs and adds generic <asm/unistd.h>. Commit f0b9abfb ("Merge branch 'linus' into perf/core") again includes 'uapi/asm/unistd.h' for powerpc. Don't know how exactly this happened as this change is not part of commit also. Signed-off-by:Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1472630591-5089-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Fixes: ad430729 ("Remove: kernel unistd*h files from perf's MANIFEST, not used") Signed-off-by:
-
Mark Rutland authored
The perf tools can read a cpumask file for a PMU, describing a subset of CPUs which that PMU covers. So far this has only been used to cater for uncore PMUs, which in practice happen to only have a single CPU described in the mask. Until recently, the perf tools only correctly handled cpumask containing a single CPU, and only when monitoring in system-wide mode. For example, prior to commit 00e727bb ("perf stat: Balance opening and reading events"), a mask with more than a single CPU could cause perf stat to hang. When a CPU PMU covers a subset of CPUs, but lacks a cpumask, perf record will fail to open events (on the cores the PMU does not support), and gives up. For systems with heterogeneous CPUs such as ARM big.LITTLE systems, this presents a problem. We have a PMU for each microarchitecture (e.g. a big PMU and a little PMU), and would like to expose a cpumask for each (so as to allow perf record and other tools to do the right thing). However, doing so kernel-side will cause old perf binaries to not function (e.g. hitting the issue solved by 00e727bb), and thus commits the cardinal sin of breaking (existing) userspace. To address this chicken-and-egg problem, this patch adds support got a new file, cpus, which is largely identical to the existing cpumask file. A kernel can expose this file, knowing that new perf binaries will correctly support it, while old perf binaries will not look for it (and thus will not be broken). Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1473330112-28528-8-git-send-email-mark.rutland@arm.comSigned-off-by:
-
Mark Rutland authored
In systems with heterogeneous CPU PMUs, it's possible for each evsel to cover a distinct set of CPUs, and hence the cpu_map associated with each evsel may have a distinct idx<->id mapping. Any of these may be distinct from the evlist's cpu map. Events can be tied to the same fd so long as they use the same per-cpu ringbuffer (i.e. so long as they are on the same CPU). To acquire the correct FDs, we must compare the Linux logical IDs rather than the evsel or evlist indices. This path adds logic to perf_evlist__mmap_per_evsel to handle this, translating IDs as required. As PMUs may cover a subset of CPUs from the evlist, we skip the CPUs a PMU cannot handle. Without this patch, perf record may try to mmap erroneous FDs on heterogeneous systems, and will bail out early rather than running the workload. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1473330112-28528-7-git-send-email-mark.rutland@arm.comSigned-off-by:
-
Peter Zijlstra authored
I wanted to know the hottest path through a function and figured the branch-stack (LBR) information should be able to help out with that. The below uses the branch-stack to create basic blocks and generate statistics from them. from to branch_i * ----> * | | block v * ----> * from to branch_i+1 The blocks are broken down into non-overlapping ranges, while tracking if the start of each range is an entry point and/or the end of a range is a branch. Each block iterates all ranges it covers (while splitting where required to exactly match the block) and increments the 'coverage' count. For the range including the branch we increment the taken counter, as well as the pred counter if flags.predicted. Using these number we can find if an instruction: - had coverage; given by: br->coverage / br->sym->max_coverage This metric ensures each symbol has a 100% spot, which reflects the observation that each symbol must have a most covered/hottest block. - is a branch target: br->is_target && br->start == add - for targets, how much of a branch's coverages comes from it: target->entry / branch->coverage - is a branch: br->is_branch && br->end == addr - for branches, how often it was taken: br->taken / br->coverage after all, all execution that didn't take the branch would have incremented the coverage and continued onward to a later branch. - for branches, how often it was predicted: br->pred / br->taken The coverage percentage is used to color the address and asm sections; for low (<1%) coverage we use NORMAL (uncolored), indicating that these instructions are not 'important'. For high coverage (>75%) we color the address RED. For each branch, we add an asm comment after the instruction with information on how often it was taken and predicted. Output looks like (sans color, which does loose a lot of the information :/) $ perf record --branch-filter u,any -e cycles:p ./branches 27 $ perf annotate branches Percent | Source code & Disassembly of branches for cycles:pu (217 samples) --------------------------------------------------------------------------------- : branches(): 0.00 : 40057a: push %rbp 0.00 : 40057b: mov %rsp,%rbp 0.00 : 40057e: sub $0x20,%rsp 0.00 : 400582: mov %rdi,-0x18(%rbp) 0.00 : 400586: mov %rsi,-0x20(%rbp) 0.00 : 40058a: mov -0x18(%rbp),%rax 0.00 : 40058e: mov %rax,-0x10(%rbp) 0.00 : 400592: movq $0x0,-0x8(%rbp) 0.00 : 40059a: jmpq 400656 <branches+0xdc> 1.84 : 40059f: mov -0x10(%rbp),%rax # +100.00% 3.23 : 4005a3: and $0x1,%eax 1.84 : 4005a6: test %rax,%rax 0.00 : 4005a9: je 4005bf <branches+0x45> # -54.50% (p:42.00%) 0.46 : 4005ab: mov 0x200bbe(%rip),%rax # 601170 <acc> 12.90 : 4005b2: add $0x1,%rax 2.30 : 4005b6: mov %rax,0x200bb3(%rip) # 601170 <acc> 0.46 : 4005bd: jmp 4005d1 <branches+0x57> # -100.00% (p:100.00%) 0.92 : 4005bf: mov 0x200baa(%rip),%rax # 601170 <acc> # +49.54% 13.82 : 4005c6: sub $0x1,%rax 0.46 : 4005ca: mov %rax,0x200b9f(%rip) # 601170 <acc> 2.30 : 4005d1: mov -0x10(%rbp),%rax # +50.46% 0.46 : 4005d5: mov %rax,%rdi 0.46 : 4005d8: callq 400526 <lfsr> # -100.00% (p:100.00%) 0.00 : 4005dd: mov %rax,-0x10(%rbp) # +100.00% 0.92 : 4005e1: mov -0x18(%rbp),%rax 0.00 : 4005e5: and $0x1,%eax 0.00 : 4005e8: test %rax,%rax 0.00 : 4005eb: je 4005ff <branches+0x85> # -100.00% (p:100.00%) 0.00 : 4005ed: mov 0x200b7c(%rip),%rax # 601170 <acc> 0.00 : 4005f4: shr $0x2,%rax 0.00 : 4005f8: mov %rax,0x200b71(%rip) # 601170 <acc> 0.00 : 4005ff: mov -0x10(%rbp),%rax # +100.00% 7.37 : 400603: and $0x1,%eax 3.69 : 400606: test %rax,%rax 0.00 : 400609: jne 400612 <branches+0x98> # -59.25% (p:42.99%) 1.84 : 40060b: mov $0x1,%eax 14.29 : 400610: jmp 400617 <branches+0x9d> # -100.00% (p:100.00%) 1.38 : 400612: mov $0x0,%eax # +57.65% 10.14 : 400617: test %al,%al # +42.35% 0.00 : 400619: je 40062f <branches+0xb5> # -57.65% (p:100.00%) 0.46 : 40061b: mov 0x200b4e(%rip),%rax # 601170 <acc> 2.76 : 400622: sub $0x1,%rax 0.00 : 400626: mov %rax,0x200b43(%rip) # 601170 <acc> 0.46 : 40062d: jmp 400641 <branches+0xc7> # -100.00% (p:100.00%) 0.92 : 40062f: mov 0x200b3a(%rip),%rax # 601170 <acc> # +56.13% 2.30 : 400636: add $0x1,%rax 0.92 : 40063a: mov %rax,0x200b2f(%rip) # 601170 <acc> 0.92 : 400641: mov -0x10(%rbp),%rax # +43.87% 2.30 : 400645: mov %rax,%rdi 0.00 : 400648: callq 400526 <lfsr> # -100.00% (p:100.00%) 0.00 : 40064d: mov %rax,-0x10(%rbp) # +100.00% 1.84 : 400651: addq $0x1,-0x8(%rbp) 0.92 : 400656: mov -0x8(%rbp),%rax 5.07 : 40065a: cmp -0x20(%rbp),%rax 0.00 : 40065e: jb 40059f <branches+0x25> # -100.00% (p:100.00%) 0.00 : 400664: nop 0.00 : 400665: leaveq 0.00 : 400666: retq (Note: the --branch-filter u,any was used to avoid spurious target and branch points due to interrupts/faults, they show up as very small -/+ annotations on 'weird' locations) Committer note: Please take a look at: http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png To see the colors. Signed-off-by: -
Wang Nan authored
When synthesizing mmap events, add MAP_HUGETLB map flag if the source of mapping is file in hugetlbfs. After this patch, perf can identify hugetlb mapping even if perf is started after the mapping of huge pages (like with 'perf top'). Signed-off-by:
Wang Nan <wangnan0@huawei.com> Reviewed-by:
Nilay Vaish <nilayvaish@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Hou Pengyang <houpengyang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1473137909-142064-4-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Wang Nan authored
Detect hugetlbfs. hugetlbfs__mountpoint() will be used during recording to help identifying hugetlb mmaps: which should be recognized as anon mapping. Signed-off-by:
-
Wang Nan authored
Hugetlbfs mapping should be recognized as anon mapping so user has a chance to create /tmp/perf-<pid>.map file for symbol resolving. This patch utilizes MAP_HUGETLB to identify hugetlb mapping. After this patch, if perf is started before a program starts using huge pages (so perf gets MMAP2 events from kernel), perf is able to recognize hugetlb mapping as anon mapping. Signed-off-by:
Hou Pengyang <houpengyang@huawei.com> Signed-off-by:
-
- 06 Sep, 2016 1 commit
-
-
Jiri Olsa authored
Yanqiu Zhang reported kernel panic when using mbm event on system where CQM is detected but without mbm event support, like with perf: # perf stat -e 'intel_cqm/event=3/' -a BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8100d64c>] update_sample+0xbc/0xe0 ... <IRQ> [<ffffffff8100d688>] __intel_mbm_event_init+0x18/0x20 [<ffffffff81113d6b>] flush_smp_call_function_queue+0x7b/0x160 [<ffffffff81114853>] generic_smp_call_function_single_interrupt+0x13/0x60 [<ffffffff81052017>] smp_call_function_interrupt+0x27/0x40 [<ffffffff816fb06c>] call_function_interrupt+0x8c/0xa0 ... The reason is that we currently allow to init mbm event even if mbm support is not detected. Adding checks for both cqm and mbm events and support into cqm's event_init. Fixes: 33c3cc7a ("perf/x86/mbm: Add Intel Memory B/W Monitoring enumeration and init") Reported-by:
Yanqiu Zhang <yanqzhan@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1473089407-21857-1-git-send-email-jolsa@kernel.orgSigned-off-by:
-
- 05 Sep, 2016 11 commits
-
-
Arnaldo Carvalho de Melo authored
We're not using it anymore, few users were, but we really could do without it, simplify lots of functions by removing it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
We don't need to initialize that area as we're not using it afterwards, leftover, ditch it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jb2un8buy4rqawz73mcdm1sn@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Including machines__set_symbol_filter(), not used anymore. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7o1qgmrpvzuis4a9f0t8mnri@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Not needed, we already have code to prune aliases. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ysyce7qjgui93gi1efbjwhf@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
This was being done just in 'perf top', but grouping idle symbols should be useful in other places as well, so remove one more symbol_filter_t user by moving this to the symbol library. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5r7xitjkzjr9jak1zy3d8u5l@git.kernel.orgSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20160901' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Support generating cross arch probes, i.e. if you specify a vmlinux file for different arch than the one in the host machine, $ perf probe --definition function_name args will generate the probe definition string needed to append to the target machine /sys/kernel/debug/tracing/kprobes_events file, using scripting (Masami Hiramatsu). - Make 'perf probe' skip the function prologue in uprobes if program compiled without optimization, using the same strategy as gdb and systemtap uses, fixing a bug where: $ perf probe -x ./test 'foo i' When 'foo(42)' was used on the "./test" executable would produce i=0 instead of the expected i=42 (Ravi Bangoria) - Demangle symbols for synthesized @plt entries too (Millian Wolff) Documentation changes: - Show default report configuration in 'perf config' example and docs (Millian Wolff) Infrastructure changes: - Make 'perf test vmlinux' tolerate the symbol aliasing pruning done when loading kallsyms and vmlinux (Arnaldo Carvalho de Melo) - Improve output of 'perf test vmlinux' test, to help identify on the verbose output which lines are warning and which are errors (Arnaldo Carvalho de Melo) - Prep work to stop having to pass symbol_filter_t to lots of functions, simplifying symtab loading routines (Arnaldo Carvalho de Melo) - Honor symbol_conf.allow_aliases when loading kallsyms as well, it was using it only when loading vmlinux files (Arnaldo Carvalho de Melo) - Fixup symbol->end before doing alias pruning when loading symbol tables (Arnaldo Carvalho de Melo) - Fix error handling of lzma kernel module decompression (Shawn Lin) Signed-off-by:
-
Will Deacon authored
PERF_EF_START is a flag to indicate to the PMU ->add() callback that, as well as claiming the PMU resources required by the event being added, it should also start the PMU. Passing this flag to the ->start() callback doesn't make sense, because ->start() always tries to start the PMU. Remove it. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Stephane Eranian authored
The offset of the counters for UPI and M2M boxes on Skylake server is non-standard (8 bytes apart). This patch introduces a custom flag UNCORE_BOX_FLAG_CTL_OFFS8 to specially handle it. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Kan Liang authored
The method to build PCI bus to socket mapping is similar among platforms. However, the PCI location which stores Node ID mapping could vary between different platforms. For example, the Node ID mapping address on Skylake server is different from the previous platform. Also, to build the mapping for the PCI bus without UBOX, it has to start from bus 0 on Skylake server. This patch removes the current hardcoded implementation and adds three parameters for snbep_pci2phy_map_init(). This way the Node ID mapping address and bus searching direction can be configured according to different platforms. Signed-off-by:
-
Ingo Molnar authored
Conflicts: kernel/events/core.c Signed-off-by: -
Peter Zijlstra authored
This effectively reverts commit: 71e7bc2b ("perf/core: Check return value of the perf_event_read() IPI") ... and puts in a comment explaining why we ignore the return value. Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:
-
- 04 Sep, 2016 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for an AMD erratum so machines without a BIOS fix work" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/AMD: Apply erratum 665 on machines without a BIOS fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two fixlet from the timers departement: - A fix for scheduler stalls in the tick idle code affecting NOHZ_FULL kernels - A trivial compile fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/nohz: Fix softlockup on scheduler stalls in kvm guest clocksource/drivers/atmel-pit: Fix compilation error -
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - a stable fix in both DM crypt and DM log-writes for too large bios (as generated by bcache) - two other stable fixes for DM log-writes - a stable fix for a DM crypt bug that could result in freeing pointers from uninitialized memory in the tfm allocation error path - a DM bufio cleanup to discontinue using create_singlethread_workqueue() * tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: remove use of deprecated create_singlethread_workqueue() dm crypt: fix free of bad values after tfm allocation failure dm crypt: fix error with too large bios dm log writes: fix check of kthread_run() return value dm log writes: fix bug with too large bios dm log writes: move IO accounting earlier to fix error path
-
- 03 Sep, 2016 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "I'm still prepping a set of fixes for btrfs fsync, just nailing down a hard to trigger memory corruption. For now, these are tested and ready." * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix one bug that process may endlessly wait for ticket in wait_reserve_ticket() Btrfs: fix endless loop in balancing block groups Btrfs: kill invalid ASSERT() in process_all_refs()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "arm64 and arm/perf fixes: - arm64 fix: debug exception unmasking on the CPU resume path - ARM PMU fixes: memory leak on error path and NULL pointer dereference" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1 drivers/perf: arm_pmu: Fix NULL pointer dereference during probe drivers/perf: arm_pmu: Fix leak in error path -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 4.8-rc5. The largest thing here is deleting an obsolete driver, drivers/misc/bh1780gli.c, as the functionality of it was replaced by an iio driver a while ago. The other fixes are things that have been reported, or reverts of broken stuff (the binder change). All of these changes have been in linux-next for a while with no reported issues" * tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Don't declare Falcon Ridge unsupported thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. thunderbolt: Fix resume quirk for Falcon Ridge 4C. lkdtm: Mark lkdtm_rodata_do_nothing() notrace mei: me: disable driver on SPT SPS firmware Revert "android: binder: fix dangling pointer comparison" drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup android: binder: fix dangling pointer comparison misc: delete bh1780 driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are three small fixes for 4.8-rc5. One for sysfs, one for kernfs, and one documentation fix, all for reported issues. All of these have been in linux-next for a while" * tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: correctly handle read offset on PREALLOC attrs documentation: drivers/core/of: fix name of of_node symlink kernfs: don't depend on d_find_any_alias() when generating notifications
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are a number of small fixes for staging and IIO drivers that resolve reported problems. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits) arm: dts: rockchip: add reset node for the exist saradc SoCs arm64: dts: rockchip: add reset saradc node for rk3368 SoCs iio: adc: rockchip_saradc: reset saradc controller before programming it iio: accel: kxsd9: Fix raw read return iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access include/linux: fix excess fence.h kernel-doc notation staging: wilc1000: correctly check if associatedsta has not been found staging: wilc1000: NULL dereference on error staging: wilc1000: txq_event: Fix coding error MAINTAINERS: Add file patterns for ion device tree bindings MAINTAINERS: Update maintainer entry for wilc1000 iio: chemical: atlas-ph-sensor: fix typo in val assignment iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING" staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility staging: comedi: dt2811: fix a precedence bug staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN. staging: comedi: ni_mio_common: fix wrong insn_write handler staging: comedi: comedi_test: fix timer race conditions staging: comedi: daqboard2000: bug fix board type matching code ...
-
