- 24 May, 2015 40 commits
-
-
Vitaly Kuznetsov authored
Move poll_channel() to hyperv_vmbus.h and make it inline and rename it to hv_poll_channel() so it can be reused in other hv_util modules. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by:
Alex Ng <alexng@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
We set kvp_context when we want to postpone receiving a packet from vmbus due to the previous transaction being unfinished. We, however, never reset this state, all consequent kvp_respond_to_host() calls will result in poll_channel() calling hv_kvp_onchannelcallback(). This doesn't cause real issues as: 1) Host is supposed to serialize transactions as well 2) If no message is pending vmbus_recvpacket() will return 0 recvlen. This is just a cleanup. Signed-off-by:
-
Vitaly Kuznetsov authored
These declarations are internal to hv_util module and hv_fcopy_* declarations already reside there. Signed-off-by:
-
Colin Ian King authored
static analysis with smatch picked up the following error: get_platform_data() error: potential null dereference 'dt_pdata'. (kzalloc returns null) Instead, the code should return NULL to avoid the following null pointer deference. Also, remove the error message as it is redundant, the caller emits an error message to alert of a failure anyhow. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Valentin Rothberg authored
Some more recent distributions set the default interpreter to python3, causing the script to break since it's written for python2. Signed-off-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
-
Valentin Rothberg authored
Sometimes a user might be interested to filter certain reports (e.g., the many defconfigs). Now, this can be achieved by specifying a Python regex with -i / --ignore. Signed-off-by:
-
Sudeep Dutt authored
modprobe SCIF driver upon start and remove it upon unload Reviewed-by:
Nikhil Rao <nikhil.rao@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by:
-
Sudeep Dutt authored
MIC card driver specific changes to enable SCIF. This patch implements the SCIF hardware bus operations and registers a SCIF device on the SCIF hardware bus. Reviewed-by:
-
Sudeep Dutt authored
MIC host driver specific changes to enable SCIF. This patch implements the SCIF hardware bus operations and registers a SCIF device on the SCIF hardware bus. Reviewed-by:
-
Sudeep Dutt authored
SCIF messaging APIs which allow sending messages between the SCIF endpoints via a byte stream based ring buffer which has been optimized to avoid reads across PCIe. The SCIF messaging APIs are typically used for short < 1024 byte messages for best performance while the RDMA APIs which will be submitted in a future patch series is recommended for larger transfers. The node enumeration API enables a user to query for the number of nodes online in the SCIF network and their node ids. Reviewed-by:
-
Nikhil Rao authored
SCIF connection APIs which establish a SCIF connection between a pair of SCIF endpoints. A SCIF connection consists of a dedicated queue-pair between the endpoints. Client messages are sent over the queue-pair whereas the signaling associated with the message is multiplexed over the node queue-pair. Similarly other control messages such as exposing registered memory are also sent over the node queue-pair. The SCIF endpoints must be in connected state to exchange messages, register memory, map remote memory and trigger DMA transfers. SCIF connections can be set up asynchronously or synchronously. Thanks to Johnnie S Peters for authoring parts of this patch during early bring up of the SCIF driver. Reviewed-by:
-
Sudeep Dutt authored
SCIF character device file operations and kernel APIs for opening and closing a user and kernel mode SCIF endpoint. This patch also enables binding to a SCIF port and listening for incoming SCIF connections. Reviewed-by:
-
Sudeep Dutt authored
SCIF node queue pair setup creates the SCIF driver kernel mode private node queue pairs between all the nodes to enable internal control message communication once SCIF gets probed by the SCIF hardware bus. Peer to peer communication between MIC Coprocessor nodes is supported. Reviewed-by:
-
Sudeep Dutt authored
SCIF module initialization, DMA mapping, ioremap wrapper APIs and debugfs hooks. SCIF gets probed by the SCIF hardware bus if SCIF devices were registered by base drivers. A MISC device is registered to provide the SCIF character device interface. Reviewed-by:
-
Sudeep Dutt authored
Update mic_bootparam and define the maximum number of DMA channels Reviewed-by:
-
Sudeep Dutt authored
The SCIF peer bus is used to register and unregister SCIF peer devices internally by the SCIF driver to signify the addition and removal of peer nodes respectively from the SCIF network. This simplifies remote node handling within SCIF and will also be used to support device probe/remove for SCIF client drivers (e.g. netdev over SCIF) Reviewed-by:
-
Sudeep Dutt authored
The SCIF hardware bus abstracts the low level hardware driver details like interrupts and mapping remote memory so that the same SCIF driver can work without any changes with the MIC host or card driver as long as the hardware bus operations are implemented. The SCIF hardware device is registered by the host and card drivers on the SCIF hardware bus resulting in probing the SCIF driver. Reviewed-by:
-
Sudeep Dutt authored
SCIF ring buffer is a single producer, single consumer byte stream ring buffer optimized for avoiding reads across the PCIe bus while adding the required barriers and hardware workarounds for the MIC Coprocessor. The ring buffer is used to implement a receive queue for SCIF driver messaging between two nodes and for byte stream messaging between SCIF endpoints. The existing in-kernel ring buffer was not reused since it has not been designed for our use across the PCIe bus where each node runs an independent OS. Each SCIF node has a receive queue for every other SCIF node, and each connected endpoint has a receive queue for messages from its peer. This pair of receive queues is referred to as a SCIF queue pair. Reviewed-by:
-
Sudeep Dutt authored
This patch introduces the SCIF documentation in the header file and describes the IOCTL interface for user mode. mic_overview.txt is updated with documentation on SCIF and a new document describing SCIF in more details is available in scif_overview.txt. Reviewed-by:
-
Ira Snyder authored
The CARMA project has ended, and the hardware has all been moved into storage. It is unlikely to ever be used again. Remove the drivers so that there is no more maintenance burden from ongoing upstream kernel changes. Signed-off-by:
Ira W. Snyder <ira.snyder@gmail.com> Signed-off-by:
-
Tal Shorer authored
Remove trailing whitespace from several lines in drivers/char/misc.c This was done using scripts/cleanfile Signed-off-by:
Tal Shorer <tal.shorer@gmail.com> Signed-off-by:
-
Matt Campbell authored
This patch provides support for the DS28EA00 digital thermometer. The DS28EA00 provides an additional two pins for implementing a sequence detection algorithm. This feature allows you to determine the physical location of the chip in the 1-wire bus without needing pre-existing knowledge of the bus ordering. Support is provided through the sysfs w1_seq file. The file will contain a single line with an integer value representing the device index in the bus starting at 0. Signed-off-by:
Matt Campbell <mattrcampbell@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
David Fries authored
A temperature conversion can take 750 ms and when possible the w1_therm slave driver drops the bus_mutex to allow other bus operations, but that includes operations such as a periodic slave search, which can remove this slave when it is no longer detected. If that happens the sl->family_data will be freed and set to NULL causing w1_slave_show to crash when it wakes up. Signed-off-by:
David Fries <David@Fries.net> Reported-By:
Thorsten Bschorr <thorsten@bschorr.de> Tested-by:
-
Dmitry Khromov authored
Some of 1-Wire devices commonly associated with physical access control systems are attached/generate presence for as short as 100 ms - hence the tens-to-hundreds milliseconds scan intervals are required. Signed-off-by:
Dmitry Khromov <dk@icelogic.net> Acked-by:
-
Krzysztof Kolasa authored
Sometimes, on x86_64, decompression fails with the following error: Decompressing Linux... Decoding failed -- System halted This condition is not needed for a 64bit kernel(from commit d5e7cafd): if( ... || (op + COPYLENGTH) > oend) goto _output_error macro LZ4_SECURE_COPY() tests op and does not copy any data when op exceeds the value. added by analogy to lz4_uncompress_unknownoutputsize(...) Signed-off-by:
Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by:
Alexander Kuleshov <kuleshovmail@gmail.com> Tested-by:
Caleb Jorden <cjorden@gmail.com> Signed-off-by:
-
Richard Weinberger authored
Not all architectures have io memory. Fixes: drivers/built-in.o: In function `spmi_pmic_arb_probe': spmi-pmic-arb.c:(.text+0x1ed399): undefined reference to `devm_ioremap_resource' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Stephen Hemminger authored
UIO base driver should only free_irq that it has requested. UIO supports drivers without interrupts (irq == 0) or custom handlers. This fixes warnings like: WARNING: CPU: 1 PID: 5478 at kernel/irq/manage.c:1244 __free_irq+0xa9/0x1e0() Trying to free already-free IRQ 0 Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Tomas Winkler authored
Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
1. mei_nfc_hci_hdr and mei_nfc_hdr are just the same thing so drop one 2. use mei_nfc_hdr structure as the member of the command and the reply instead of replicating all header fields. 3. dump the header for easier debugging Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
since we move all nfc hanling to the mei_phy module we can kill mei_cl_ops Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
move nfc logic to mei_phy module, we prefer as much as possible not to deal with a particualr client protocol in the mei generic infrasutcutre Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
Export name and uuid via sysfs and uevent Cc: linux-api@vger.kernel.org Signed-off-by:
-
Tomas Winkler authored
In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
The io callback is clear from write_waitling_list after we receive interrupt from the hw to ack the write completion. We need to wait for this interrupt deliver before we try to enter low power state Signed-off-by:
-
Alexander Usyskin authored
On longer non-blocking write might not complete at the end of autosuspend expiration, therefore we request autosuspend again on the write completion. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Alexander Usyskin authored
Consume the write flow control on the first chunk of the write instead of on the buffer completion. We can safely assume that the consequent chunks have the flow control granted. This addresses two issues: 1. Blocks other callbacks from the same client riding on the client's flow control and prevents interleaving of messages as FW cannot distinguish between two messages from the same client. 2. Fixes single buffer flow control arbitration in a clean way, without connection/disconnection book keeping Signed-off-by:
-
Alexander Usyskin authored
Add client info to debug prints in the read function to ease on debugging efforts. Signed-off-by:
-
Tomas Winkler authored
Remove spurious blank Signed-off-by:
-
Alexander Usyskin authored
We can receive mtu with one call now, no need to store it. Signed-off-by:
-
