- 11 Jan, 2007 1 commit
-
-
- 10 Jan, 2007 9 commits
-
-
Adrian Hunter authored
The read-while-load method of reading from OneNAND needs to allow for the change of bufferRAM address at the boundary between the two chips in a double density (DDP) device. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Kyungmin Park authored
we don't need to return ecc error when 1-bit ecc. We only return error code when 2-bit ecc error Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Adrian Hunter authored
Read-while-load enables higher performance read operations. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Kyungmin Park authored
Even though there is ECC error. OneNAND driver updates the buffram as valid Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Artem Bityutskiy authored
This patch teaches OneNAND to release processor in read/write/erase cycles and let other processes proceed. Also, remove buggi touch watchdog call which only hides the problem instead of solving it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Kyungmin Park authored
OneNAND supports up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Kyungmin Park authored
Fix onenand_wait error reporting Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Kyungmin Park authored
Don't use ref->flash_offset directly in debugging code, use the ref_offset macro instead. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
Artem Bityutskiy authored
Make JFFS2 nicer and teach it to call cond_resched() in loops which may be quite large. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
- 02 Jan, 2007 1 commit
-
-
Amit Choudhary authored
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 19 Dec, 2006 1 commit
-
-
Artem Bityutskiy authored
We observe soft lockups when doing heavy test which creates directory with a lot of direntries and deletes them. This cycle is the reason fo this. Make it nicer and add cond_resched() inside of it. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 11 Dec, 2006 3 commits
-
-
Ralf Baechle authored
Support for the ITE8172 based boards was deleted a while ago so this is dead code. The Kconfig dependency on MIPS was wrong anyway, MIPS is a processor architecture and nothing else; guesses on systems architecture are likely to be wrong ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Kyungmin Park authored
There are missing place in recent MTD oob patch http://git.infradead.org/?p=mtd-2.6.git;a=commitdiff;h=7014568bad55c20b7ee4f439d78c9e875912d51fSigned-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
I will not commit even trivial and obvious one-line fixes without building. I will not commit even trivial and obvious one-line fixes without building. I will not commit even trivial and obvious one-line fixes without building. I will not commit even trivial and obvious one-line fixes without building. Only clever people can get away with that. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 10 Dec, 2006 3 commits
-
-
Yan Burman authored
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Randy Dunlap authored
ESB2ROM uses PCI interface functions. With CONFIG_PCI=n: drivers/mtd/maps/esb2rom.c: In function 'esb2rom_init_one': drivers/mtd/maps/esb2rom.c:167: warning: implicit declaration of function 'pci_dev_get' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 08 Dec, 2006 4 commits
-
-
Vitaly Wool authored
inlined below is the patch that adds physmap driver for of_device. It's an MTD part of the two-part support for flash/ROM devices based on Open Firmware descriptions. The arch part (currently only PowerPC which is no surprise) was introduced to powerpc folks earlier and recently the older version of the powerpc part has been included into the powerpc.git tree (see http://www.kernel.org/git/?p=linux/kernel/git/paulus/powerpc.git;a=commitdiff;h=28f9ec349ae47c91768b7bc5607db4442c818e11). drivers/mtd/maps/Kconfig | 9 + drivers/mtd/maps/Makefile | 1 drivers/mtd/maps/physmap_of.c | 255 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 265 insertions(+) Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Sergey Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Rod Whitby authored
RedBoot supports storing the FIS directory and the RedBoot configuration area in the same block of flash memory. This is not the most common RedBoot configuration, but it is used on commercially available boards supported by the kernel. A recent patch to mtd/redboot.c (http://lkml.org/lkml/2006/3/20/410) which corrected the skipping of deleted table entries has exposed the latent problem of the kernel redboot parser running off the end of the FIS directory and interpreting the RedBoot configuration information as table entries. This patch terminates the table parsing when the first truly empty entry is found (table entry deletion only clears the first byte of the name, so two cleared bytes in a row indicates the end of the table), thereby supporting the combined redboot FIS directory and RedBoot configuration information flash layout scenario. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Andrew Victor authored
Add support for 16-bit NAND bus-width for the AT91 NAND driver. The 16-bit NAND is found on the Atmel AT91SAM9260-EK and AT91SAM9261-EK boards. Orignal Patch from Patrice Vilchez Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Artem Bityutskiy authored
Number of address bytes for 64-128 MiB NANDs is 4, not 5. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 05 Dec, 2006 1 commit
-
-
Timo Lindhorst authored
Select MTD_NAND_ECC_SMC (ECC byte order according to the Smart Media Specification) if MTD_NAND_NDFC is used. Using the wrong byte order causes fatal, unnoticed data damage. For further information see: http://lists.infradead.org/pipermail/linux-mtd/2006-November/016920.htmlSigned-off-by: Timo Lindhorst <lindhors@linux.vnet.ibm.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 01 Dec, 2006 4 commits
-
-
Yoshinori Sato authored
Can't analyze FIS directory in CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG really. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Mariusz Kozlowski authored
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Haavard Skinnemoen authored
This patch fixes the "jffs2_flash_writev(): Non-contiguous write to 00825300 with mtd_dataflash" bug. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
- 30 Nov, 2006 1 commit
-
-
David Woodhouse authored
The newly-added cafe_ecc.c had a lot of it because of the way the lookup table was auto-generated; clean up the other files too while we're at it. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 29 Nov, 2006 12 commits
-
-
Linus Torvalds authored
It's all good.
-
Francois Romieu authored
This changes the type of variable "i" in rtl8169_init_one() from "unsigned int" to "int". "i" is checked for < 0 later, which can never happen for "unsigned". This results in broken error handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between multiple platforms [ARM] Export smp_call_function() [ARM] Add PM_LEGACY defaults
-
Milan Svoboda authored
Move declaration of struct pxa2xx_udc_mach_info from include/asm-arm/arch-pxa/udc.h to new file include/asm-arm/mach/udc_pxa2xx.h. This allow us to use this structure with multiple platforms - pxa and ixp4xx. USB device controller used in pxa25x is the same as controller used in ixp4xx. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David Woodhouse authored
While we're fixing up the newly-added symbol, change the neighbouring ones too, for consistency and also to reflect the author's interpretation of the GPL -- which is that _no_ non-GPL modules are permitted. The author always intended his code to be released under the GPL, and believes that any new interpretation of 'EXPORT_SYMBOL' as being any different from 'EXPORT_SYMBOL_GPL' is entirely invalid; the GPL requires that _all_ exports have the semantics of the new 'EXPORT_SYMBOL_GPL', which means the extra four characters are entirely redundant. But since those four extra characters trigger the check for illegal modules in a way that just EXPORT_SYMBOL does not, it's useful to change anyway. This action in no way indicates an admission that there is any legal distinction between the two states, and in particular does not indicate that the author believes that non-GPL modules may use symbols exported with EXPORT_SYMBOL alone. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Ralf Baechle authored
Otherwise CPU 0 doesn't show up in sysfs which breaks some software. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Artem Bityutskiy authored
get_mtd_device() returns NULL in case of any failure. Teach it to return an error code instead. Fix all users as well. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
Artem Bityutskiy authored
This patch adds get_device() and put_device() methods to the MTD description structure (struct mtd_info). These methods are called by MTD whenever the MTD device is get or put. They are needed when the underlying driver is something smarter then just flash chip driver, for example UBI. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
Artem Bityutskiy authored
This patch adds one more function to the MTD interface to make it possible to open MTD devices by their names, not only numbers. This is very handy in many situations. Also, MTD device number depend on load order and may vary, while names are fixed. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
Thomas Gleixner authored
Many SLC NANDs support up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
Josh Boyer authored
Add a MTD_BLKDEVS Kconfig option to cleanup the makefile a bit Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-
Yoichi Yuasa authored
This patch has fixed name of map probe for cstm_mips_ixx.c Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
-