Seems like C++17 standard mode doesn't recognize typeof() anymore. This can
be tested by compiling test_cpp test with -std=c++17 or -std=c++1z options.
The use of typeof in skeleton generated code is unnecessary, all types are
well-known at the time of code generation, so remove all typeof()'s to make
skeleton code more future-proof when interacting with C++ compilers.

Fixes: 985ead41 ("bpftool: Add skeleton codegen command")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200812025907.1371956-1-andriin@fb.com

Enforce XDP_FLAGS_UPDATE_IF_NOEXIST only if new BPF program to be attached is
non-NULL (i.e., we are not detaching a BPF program).

Fixes: d4baa936 ("bpf, xdp: Extract common XDP program attachment logic")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200812022923.1217922-1-andriin@fb.com

I'm getting some garbage in bytes 8 and 9 when doing conversion
from sockaddr_in to sockaddr_in6 (leftover from AF_INET?). Let's
explicitly clear the higher bytes.

Fixes: 0ab5539f ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200807223846.4190917-1-sdf@google.com

test_progs reports the segmentation fault as below:

  $ sudo ./test_progs -t mmap --verbose
  test_mmap:PASS:skel_open_and_load 0 nsec
  [...]
  test_mmap:PASS:adv_mmap1 0 nsec
  test_mmap:PASS:adv_mmap2 0 nsec
  test_mmap:PASS:adv_mmap3 0 nsec
  test_mmap:PASS:adv_mmap4 0 nsec
  Segmentation fault

This issue was triggered because mmap() and munmap() used inconsistent
length parameters; mmap() creates a new mapping of 3 * page_size, but the
length parameter set in the subsequent re-map and munmap() functions is
4 * page_size; this leads to the destruction of the process space.

To fix this issue, first create 4 pages of anonymous mapping, then do all
the mmap() with MAP_FIXED.

Another issue is that when unmap the second page fails, the length
parameter to delete tmp1 mappings should be 4 * page_size.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200810153940.125508-1-Jianlin.Lv@arm.com

Commit 5fbc2208 ("tools/libpf: Add offsetof/container_of macro
in bpf_helpers.h") added a macro offsetof() to get the offset of a
structure member:

   #define offsetof(TYPE, MEMBER)  ((size_t)&((TYPE *)0)->MEMBER)

In certain use cases, size_t type may not be available so
Commit da7a3506 ("libbpf bpf_helpers: Use __builtin_offsetof
for offsetof") changed to use __builtin_offsetof which removed
the dependency on type size_t, which I suggested.

But using __builtin_offsetof will prevent CO-RE relocation
generation in case that, e.g., TYPE is annotated with "preserve_access_info"
where a relocation is desirable in case the member offset is changed
in a different kernel version. So this patch reverted back to
the original macro but using "unsigned long" instead of "site_t".

Fixes: da7a3506 ("libbpf bpf_helpers: Use __builtin_offsetof for offsetof")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20200811030852.3396929-1-yhs@fb.com

When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the
compiler to deduce a case where _val can only have the value of -1 at
compile time. Specifically,

/* struct bpf_insn: _s32 imm */
u64 imm = insn->imm; /* sign extend */
if (imm >> 32) { /* non-zero only if insn->imm is negative */
  /* inlined from ur_load_imm_any */
  u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
  if (__builtin_constant_p(__imm) && __imm > 255)
    compiletime_assert_XXX()

This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that
checks that a given value is representable in one byte (interpreted as
unsigned).

FIELD_FIT() should return true or false at runtime for whether a value
can fit for not. Don't break the build over a value that's too large for
the mask. We'd prefer to keep the inlining and compiler optimizations
though we know this case will always return false.

Cc: stable@vger.kernel.org
Fixes: 1697599e ("bitfield.h: add FIELD_FIT() helper")
Link: https://lore.kernel.org/kernel-hardening/CAK7LNASvb0UDJ0U5wkYYRzTAdnEs64HjXpEUL7d=V0CXiAXcNw@mail.gmail.com/Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When TFO keys are read back on big endian systems either via the global
sysctl interface or via getsockopt() using TCP_FASTOPEN_KEY, the values
don't match what was written.

For example, on s390x:

# echo "1-2-3-4" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
02000000-01000000-04000000-03000000

Instead of:

# cat /proc/sys/net/ipv4/tcp_fastopen_key
00000001-00000002-00000003-00000004

Fix this by converting to the correct endianness on read. This was
reported by Colin Ian King when running the 'tcp_fastopen_backup_key' net
selftest on s390x, which depends on the read value matching what was
written. I've confirmed that the test now passes on big and little endian
systems.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Fixes: 438ac880 ("net: fastopen: robustness and endianness fixes for SipHash")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dumazet <edumazet@google.com>
Reported-and-tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I'm not doing much work on the NFP driver any more.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dacce2be ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, while
calculating tcp hdr length, it does not take into account if the
packet is encapsulated or not.

This patch fixes this issue by using correct reference for inner
tcp header.

Fixes: dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commits 6d04fe15 and
a31edb20.

It turns out the idea to share a single pointer for both kernel and user
space address causes various kinds of problems.  So use the slightly less
optimal version that uses an extra bit, but which is guaranteed to be safe
everywhere.

Fixes: 6d04fe15 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper function ip_is_fragment() to check ip fragment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The out_fs jump label has nothing to do but goto out.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed
accordingly.

Fixes: 00e188ef ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper function fdput() to fput() the file iff FDPUT_FPUT is set.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent commit introduced a late error path in phy_device_create()
which fails to release the device name allocated by dev_set_name().

Fixes: 13d0ab67 ("net: phy: check return code when requesting PHY driver module")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trying to use ktls on a system with 32-bit userspace and 64-bit kernel
results in a EOPNOTSUPP message during sendmsg:

  setsockopt(3, SOL_TLS, TLS_TX, …, 40) = 0
  sendmsg(3, …, msg_flags=0}, 0) = -1 EOPNOTSUPP (Operation not supported)

The tls_sw implementation does strict flag checking and does not allow
the MSG_CMSG_COMPAT flag, which is set if the message comes in through
the compat syscall.

This patch adds MSG_CMSG_COMPAT to the flag check to allow the usage of
the TLS SW implementation on systems using the compat syscall path.

Note that the same check is present in the sendmsg path for the TLS
device implementation, however the flag hasn't been added there for lack
of testing hardware.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2020-08-08

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 2 day(s) which contain
a total of 24 files changed, 216 insertions(+), 135 deletions(-).

The main changes are:

1) Fix UAPI for BPF map iterator before it gets frozen to allow for more
   extensions/customization in future, from Yonghong Song.

2) Fix selftests build to undo verbose build output, from Andrii Nakryiko.

3) Fix inlining compilation error on bpf_do_trace_printk() due to variable
   argument lists, from Stanislav Fomichev.

4) Fix an uninitialized pointer warning at btf__parse_raw() in libbpf,
   from Daniel T. Lee.

5) Fix several compilation warnings in selftests with regards to ignoring
   return value, from Jianlin Lv.

6) Fix interruptions by switching off timeout for BPF tests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With commit b93df08c ("mptcp: explicitly track the fully
established status"), the status of unaccepted mptcp closed in
mptcp_sock_destruct() changes from TCP_SYN_RECV to TCP_ESTABLISHED.

As a result mptcp_sock_destruct() does not perform the proper
cleanup and inet_sock_destruct() will later emit a warn.

Address the issue updating the condition tested in mptcp_sock_destruct().
Also update the related comment.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/66Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Fixes: b93df08c ("mptcp: explicitly track the fully established status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

During diag self-tests we introduce long wait in the mptcp test
program to give the script enough time to access the sockets
dump.

Such wait is introduced after shutting down one sockets end. Since
commit 43b54c6e ("mptcp: Use full MPTCP-level disconnect state
machine") if both sides shutdown the socket is correctly transitioned
into CLOSED status.

As a side effect some sockets are not dumped via the diag interface,
because the socket state (CLOSED) does not match the default filter, and
this cause self-tests instability.

Address the issue moving the above mentioned wait before shutting
down the socket.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/68
Fixes: df62f2ec ("selftests/mptcp: add diag interface tests")
Tested-and-acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit df62f2ec ("selftests/mptcp: add diag interface tests")
the MPTCP selftests relies on the MPTCP diag interface which is
enabled by a specific kconfig knob: be sure to include it.

Fixes: df62f2ec ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Query the USB device's device tree node when looking for a MAC address.
The struct device embedded into the struct net_device does not have a
device tree node attached at all.

The reason why this went unnoticed is because the system where this was
tested was one of the few development units that had its OTP programmed,
as opposed to production systems where the MAC address is stored in a
separate EEPROM and is passed via device tree by the firmware.
Reported-by: EJ Hsu <ejh@nvidia.com>
Fixes: acb6d377 ("r8152: Use MAC address from device tree if available")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop repeated words in kernel/bpf/: {has, the}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200807033141.10437-1-rdunlap@infradead.org

99aacebe ("selftests: do not use .ONESHELL") removed .ONESHELL, which
changes how Makefile "silences" multi-command target recipes. selftests/bpf's
Makefile relied (a somewhat unknowingly) on .ONESHELL behavior of silencing
all commands within the recipe if the first command contains @ symbol.
Removing .ONESHELL exposed this hack.

This patch fixes the issue by explicitly silencing each command with $(Q).

Also explicitly define fallback rule for building *.o from *.c, instead of
relying on non-silent inherited rule. This was causing a non-silent output for
bench.o object file.

Fixes: 92f7440e ("selftests/bpf: More succinct Makefile output")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200807033058.848677-1-andriin@fb.com

The BPF helper bpf_trace_printk() no longer uses trace_printk();
it is now triggers a dedicated trace event.  Hence the described
warning is no longer present, so remove the discussion of it as
it may confuse people.

Fixes: ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1596801029-32395-1-git-send-email-alan.maguire@oracle.com

1. Added a skb->len check

This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.

2. Changed to use needed_headroom instead of hard_header_len to request
necessary headroom to be allocated

In net/packet/af_packet.c, the function packet_snd first reserves a
headroom of length (dev->hard_header_len + dev->needed_headroom).
Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header,
which calls dev->header_ops->create, to create the link layer header.
If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of
length (dev->hard_header_len), and assumes the user to provide the
appropriate link layer header.

So according to the logic of af_packet.c, dev->hard_header_len should
be the length of the header that would be created by
dev->header_ops->create.

However, this driver doesn't provide dev->header_ops, so logically
dev->hard_header_len should be 0.

So we should use dev->needed_headroom instead of dev->hard_header_len
to request necessary headroom to be allocated.

This change fixes kernel panic when this driver is used with AF_PACKET
SOCK_RAW sockets.

Call stack when panic:

[  168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20
put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0
dev:veth0
...
[  168.399255] Call Trace:
[  168.399259]  skb_push.cold+0x14/0x24
[  168.399262]  eth_header+0x2b/0xc0
[  168.399267]  lapbeth_data_transmit+0x9a/0xb0 [lapbether]
[  168.399275]  lapb_data_transmit+0x22/0x2c [lapb]
[  168.399277]  lapb_transmit_buffer+0x71/0xb0 [lapb]
[  168.399279]  lapb_kick+0xe3/0x1c0 [lapb]
[  168.399281]  lapb_data_request+0x76/0xc0 [lapb]
[  168.399283]  lapbeth_xmit+0x56/0x90 [lapbether]
[  168.399286]  dev_hard_start_xmit+0x91/0x1f0
[  168.399289]  ? irq_init_percpu_irqstack+0xc0/0x100
[  168.399291]  __dev_queue_xmit+0x721/0x8e0
[  168.399295]  ? packet_parse_headers.isra.0+0xd2/0x110
[  168.399297]  dev_queue_xmit+0x10/0x20
[  168.399298]  packet_sendmsg+0xbf0/0x19b0
......

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang compiler version: 12.0.0
The following warning appears during the selftests/bpf compilation:

prog_tests/send_signal.c:51:3: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
   51 |   write(pipe_c2p[1], buf, 1);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~
prog_tests/send_signal.c:54:3: warning: ignoring return value of ‘read’,
declared with attribute warn_unused_result [-Wunused-result]
   54 |   read(pipe_p2c[0], buf, 1);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~
......

prog_tests/stacktrace_build_id_nmi.c:13:2: warning: ignoring return value
of ‘fscanf’,declared with attribute warn_unused_result [-Wunused-resul]
   13 |  fscanf(f, "%llu", &sample_freq);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

test_tcpnotify_user.c:133:2: warning:ignoring return value of ‘system’,
declared with attribute warn_unused_result [-Wunused-result]
  133 |  system(test_script);
      |  ^~~~~~~~~~~~~~~~~~~
test_tcpnotify_user.c:138:2: warning:ignoring return value of ‘system’,
declared with attribute warn_unused_result [-Wunused-result]
  138 |  system(test_script);
      |  ^~~~~~~~~~~~~~~~~~~
test_tcpnotify_user.c:143:2: warning:ignoring return value of ‘system’,
declared with attribute warn_unused_result [-Wunused-result]
  143 |  system(test_script);
      |  ^~~~~~~~~~~~~~~~~~~

Add code that fix compilation warning about ignoring return value and
handles any errors; Check return value of library`s API make the code
more secure.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200806104224.95306-1-Jianlin.Lv@arm.com

Several bpf tests are interrupted by the default timeout of 45 seconds added
by commit 852c8cbf ("selftests/kselftest/runner.sh: Add 45 second
timeout per test"). In my case it was test_progs, test_tunnel.sh,
test_lwt_ip_encap.sh and test_xdping.sh.

There's not much value in having a timeout for bpf tests, switch it off.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/7a9198ed10917f4ecab4a3dd74bcda1200791efd.1596739059.git.jbenc@redhat.com

I get the following error during compilation on my side:
kernel/trace/bpf_trace.c: In function 'bpf_do_trace_printk':
kernel/trace/bpf_trace.c:386:34: error: function 'bpf_do_trace_printk' can never be inlined because it uses variable argument lists
 static inline __printf(1, 0) int bpf_do_trace_printk(const char *fmt, ...)
                                  ^

Fixes: ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200806182612.1390883-1-sdf@google.com

int sets_patch(struct object *obj) doesn't have a 'return 0' at the end.

Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200806155225.637202-1-sdf@google.com

Recently, from commit 94a1fedd ("libbpf: Add btf__parse_raw() and
generic btf__parse() APIs"), new API has been added to libbpf that
allows to parse BTF from raw data file (btf__parse_raw()).

The commit derives build failure of samples/bpf due to improper access
of uninitialized pointer at btf_parse_raw().

    btf.c: In function btf__parse_raw:
    btf.c:625:28: error: btf may be used uninitialized in this function
      625 |  return err ? ERR_PTR(err) : btf;
          |         ~~~~~~~~~~~~~~~~~~~^~~~~

This commit fixes the build failure of samples/bpf by adding code of
initializing btf pointer as NULL.

Fixes: 94a1fedd ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805223359.32109-1-danieltimlee@gmail.com

Yonghong Song says:

====================
Andrii raised a concern that current uapi for bpf iterator map
element is a little restrictive and not suitable for future potential
complex customization. This is a valid suggestion, considering people
may indeed add more complex custimization to the iterator, e.g.,
cgroup_id + user_id, etc. for task or task_file. Another example might
be map_id plus additional control so that the bpf iterator may bail
out a bucket earlier if a bucket has too many elements which may hold
lock too long and impact other parts of systems.

Patch #1 modified uapi with kernel changes. Patch #2
adjusted libbpf api accordingly.

Changelogs:
  v3 -> v4:
    . add a forward declaration of bpf_iter_link_info in
      tools/lib/bpf/bpf.h in case that libbpf is built against
      not-latest uapi bpf.h.
    . target the patch set to "bpf" instead of "bpf-next"
  v2 -> v3:
    . undo "not reject iter_info.map.map_fd == 0" from v1.
      In the future map_fd may become optional, so let us use map_fd == 0
      indicating the map_fd is not set by user space.
    . add link_info_len to bpf_iter_attach_opts to ensure always correct
      link_info_len from user. Otherwise, libbpf may deduce incorrect
      link_info_len if it uses different uapi header than the user app.
  v1 -> v2:
    . ensure link_create target_fd/flags == 0 since they are not used. (Andrii)
    . if either of iter_info ptr == 0 or iter_info_len == 0, but not both,
      return error to user space. (Andrii)
    . do not reject iter_info.map.map_fd == 0, go ahead to use it trying to
      get a map reference since the map_fd is required for map_elem iterator.
    . use bpf_iter_link_info in bpf_iter_attach_opts instead of map_fd.
      this way, user space is responsible to set up bpf_iter_link_info and
      libbpf just passes the data to the kernel, simplifying libbpf design.
      (Andrii)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Previous commit adjusted kernel uapi for map
element bpf iterator. This patch adjusted libbpf API
due to uapi change. bpftool and bpf_iter selftests
are also changed accordingly.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055058.1457623-1-yhs@fb.com

Commit a5cbe05a ("bpf: Implement bpf iterator for
map elements") added bpf iterator support for
map elements. The map element bpf iterator requires
info to identify a particular map. In the above
commit, the attr->link_create.target_fd is used
to carry map_fd and an enum bpf_iter_link_info
is added to uapi to specify the target_fd actually
representing a map_fd:
    enum bpf_iter_link_info {
	BPF_ITER_LINK_UNSPEC = 0,
	BPF_ITER_LINK_MAP_FD = 1,

	MAX_BPF_ITER_LINK_INFO,
    };

This is an extensible approach as we can grow
enumerator for pid, cgroup_id, etc. and we can
unionize target_fd for pid, cgroup_id, etc.
But in the future, there are chances that
more complex customization may happen, e.g.,
for tasks, it could be filtered based on
both cgroup_id and user_id.

This patch changed the uapi to have fields
	__aligned_u64	iter_info;
	__u32		iter_info_len;
for additional iter_info for link_create.
The iter_info is defined as
	union bpf_iter_link_info {
		struct {
			__u32   map_fd;
		} map;
	};

So future extension for additional customization
will be easier. The bpf_iter_link_info will be
passed to target callback to validate and generic
bpf_iter framework does not need to deal it any
more.

Note that map_fd = 0 will be considered invalid
and -EBADF will be returned to user space.

Fixes: a5cbe05a ("bpf: Implement bpf iterator for map elements")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com

runqslower's Makefile is building/installing bpftool into
$(OUTPUT)/sbin/bpftool, which coincides with $(DEFAULT_BPFTOOL). In practice
this means that often when building selftests from scratch (after `make
clean`), selftests are racing with runqslower to simultaneously build bpftool
and one of the two processes fail due to file being busy. Prevent this race by
explicitly order-depending on $(BPFTOOL_DEFAULT).

Fixes: a2c9652f ("selftests: Refactor build to remove tools/lib/bpf from include path")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805004757.2960750-1-andriin@fb.com

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull smack updates from Casey Schaufler:
 "Minor fixes to Smack for the v5.9 release.

  All were found by automated checkers and have straightforward
  resolution"

* tag 'Smack-for-5.9' of git://github.com/cschaufler/smack-next:
  Smack: prevent underflow in smk_set_cipso()
  Smack: fix another vsscanf out of bounds
  Smack: fix use-after-free in smk_write_relabel_self()

Pull MIPS upates from Thomas Bogendoerfer:

 - improvements for Loongson64

 - extended ingenic support

 - removal of not maintained paravirt system type

 - cleanups and fixes

* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
  MIPS: SGI-IP27: always enable NUMA in Kconfig
  MAINTAINERS: Update KVM/MIPS maintainers
  MIPS: Update default config file for Loongson-3
  MIPS: KVM: Add kvm guest support for Loongson-3
  dt-bindings: mips: Document Loongson kvm guest board
  MIPS: handle Loongson-specific GSExc exception
  MIPS: add definitions for Loongson-specific CP0.Diag1 register
  MIPS: only register FTLBPar exception handler for supported models
  MIPS: ingenic: Hardcode mem size for qi,lb60 board
  MIPS: DTS: ingenic/qi,lb60: Add model and memory node
  MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
  MIPS: head.S: Init fw_passed_dtb to builtin DTB
  of: address: Fix parser address/size cells initialization
  of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
  MIPS: DTS: Fix number of msi vectors for Loongson64G
  MIPS: Loongson64: Add ISA node for LS7A PCH
  MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
  MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
  MIPS: Loongson64: Process ISA Node in DeviceTree
  of_address: Add bus type match for pci ranges parser
  ...

Pull ARM updates from Russell King:

 - add arch/arm/Kbuild from Masahiro Yamada.

 - simplify act_mm macro, since it contains an open-coded
   get_thread_info.

 - VFP updates for Clang from Stefan Agner.

 - Fix unwinder for Clang from Nathan Huckleberry.

 - Remove unused it8152 PCI host controller, used by the removed cm-x2xx
   platforms from Mike Rapoport.

 - Further explanation of __range_ok().

 - Remove kimage_voffset that isn't used anymore from Marc Zyngier.

 - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel.

 - Documentation cleanup for mach-* from Pete Zaitcev.

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8996/1: Documentation/Clean up the description of mach-<class>
  ARM: 8995/1: drop Thumb-2 workaround for ancient binutils
  ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM
  ARM: uaccess: add further explanation of __range_ok()
  ARM: 8993/1: remove it8152 PCI controller driver
  ARM: 8992/1: Fix unwind_frame for clang-built kernels
  ARM: 8991/1: use VFP assembler mnemonics if available
  ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
  ARM: 8989/1: use .fpu assembler directives instead of assembler arguments
  ARM: 8982/1: mm: Simplify act_mm macro
  ARM: 8981/1: add arch/arm/Kbuild

Pull arch/csky updates from Guo Ren:
 "New features:
   - seccomp-filter
   - err-injection
   - top-down&random mmap-layout
   - irq_work
   - show_ipi
   - context-tracking

  Fixes & Optimizations:
   - kprobe_on_ftrace
   - optimize panic print"

* tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux:
  csky: Add context tracking support
  csky: Add arch_show_interrupts for IPI interrupts
  csky: Add irq_work support
  csky: Fixup warning by EXPORT_SYMBOL(kmap)
  csky: Set CONFIG_NR_CPU 4 as default
  csky: Use top-down mmap layout
  csky: Optimize the trap processing flow
  csky: Add support for function error injection
  csky: Fixup kprobes handler couldn't change pc
  csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE
  csky: Add cpu feature register hint for smp
  csky: Add SECCOMP_FILTER supported
  csky: remove unusued thread_saved_pc and *_segments functions/macros