Split the metadata commit in two parts:

1. dm_clone_metadata_pre_commit(): Prepare the current transaction for
   committing. After this is called, all subsequent metadata updates,
   done through either dm_clone_set_region_hydrated() or
   dm_clone_cond_set_range(), will be part of the next transaction.

2. dm_clone_metadata_commit(): Actually commit the current transaction
   to disk and start a new transaction.

This is required by the following commit. It allows dm-clone to flush
the destination device after step (1) to ensure that all freshly
hydrated regions, for which we are updating the metadata, are properly
written to non-volatile storage and won't be lost in case of a crash.

Fixes: 7431b783 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Extend struct dirty_map with a second bitmap which tracks the exact
regions that were hydrated during the current metadata transaction.

Moreover, fix __flush_dmap() to only commit the metadata of the regions
that were hydrated during the current transaction.

This is required by the following commits to fix a data corruption bug.

Fixes: 7431b783 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

We got the following warnings from thin_check during thin-pool setup:

  $ thin_check /dev/vdb
  examining superblock
  examining devices tree
    missing devices: [1, 84]
      too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126)
  examining mapping tree

The phenomenon is the number of entries in one node of details_info tree is
less than (max_entries / 3). And it can be easily reproduced by the following
procedures:

  $ new a thin pool
  $ presume the max entries of details_info tree is 126
  $ new 127 thin devices (e.g. 1~127) to make the root node being full
    and then split
  $ remove the first 43 (e.g. 1~43) thin devices to make the children
    reblance repeatedly
  $ stop the thin pool
  $ thin_check

The root cause is that the B-tree removal procedure in __rebalance2()
doesn't guarantee the invariance: the minimal number of entries in
non-root node should be >= (max_entries / 3).

Simply fix the problem by increasing the rebalance threshold to
make sure the number of entries in each child will be greater
than or equal to (max_entries / 3 + 1), so no matter which
child is used for removal, the number will still be valid.

Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Fixes: 7431b783 ("dm: add clone target")
Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Removes the branching for edge-case where no SCSI device handler
exists.  The __map_bio_fast() method was far too limited, by only
selecting a new pathgroup or path IFF there was a path failure, fix this
be eliminating it in favor of __map_bio().  __map_bio()'s extra SCSI
device handler specific MPATHF_PG_INIT_REQUIRED test is not in the fast
path anyway.

This change restores full path selector functionality for bio-based
configurations that don't haave a SCSI device handler.  But it should be
noted that the path selectors do have an impact on performance for
certain networks that are extremely fast (and don't require frequent
switching).

Fixes: 8d47e659 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Cc: stable@vger.kernel.org
Reported-by: Drew Hastings <dhastings@crucialwebhost.com>
Suggested-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This reverts commit a1b89132.

Revert required hand-patching due to subsequent changes that were
applied since commit a1b89132.

Requires: ed0302e8 ("dm crypt: make workqueue names device-specific")
Cc: stable@vger.kernel.org
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199857Reported-by: Vito Caputo <vcaputo@pengaru.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Single thread fio test (read, bs=4k, ioengine=libaio, iodepth=128,
numjobs=1) over dm-thin device has poor performance versus bare nvme
device.

Further investigation with perf indicates that queue_work_on() consumes
over 20% CPU time when doing IO over dm-thin device. The call stack is
as follows.

- 40.57% thin_map
    + 22.07% queue_work_on
    + 9.95% dm_thin_find_block
    + 2.80% cell_defer_no_holder
      1.91% inc_all_io_entry.isra.33.part.34
    + 1.78% bio_detain.isra.35

In cell_defer_no_holder(), wakeup_worker() is always called, no matter
whether the tc->deferred_bio_list list is empty or not. In single thread
IO model, this list is most likely empty. So skip waking up worker thread
if tc->deferred_bio_list list is empty.

Single thread IO performance improves from 448 MiB/s to 646 MiB/s (+44%)
once the needless wake_worker() calls are properly skipped.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Metadata runs are supposed to be aligned on 4k boundary (so that they work
efficiently with disks with 4k sectors). However, there was a programming
bug that makes them aligned on 128k boundary instead. The unused space is
wasted.

Fix this bug by providing a proper 4k alignment. In order to keep
existing volumes working, we introduce a new flag SB_FLAG_FIXED_PADDING
- when the flag is clear, we calculate the padding the old way. In order
to make sure that the old version cannot mount the volume created by the
new version, we increase superblock version to 4.

Also in order to not break with old integritysetup, we fix alignment
only if the parameter "fix_padding" is present when formatting the
device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When building with Clang + -Wtautological-constant-compare:

 drivers/md/dm-raid.c:619:8: warning: converting the result of '<<' to a
 boolean always evaluates to true [-Wtautological-constant-compare]
                 r = !RAID10_OFFSET;
                      ^
 drivers/md/dm-raid.c:517:28: note: expanded from macro 'RAID10_OFFSET'
 #define RAID10_OFFSET                   (1 << 16) /* stripes with data
 copies area adjacent on devices */
                                           ^
 1 warning generated.

Negating a non-zero number will always make it zero, which is the
default value of r in this function so this statement is unnecessary;
remove it so that clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/753Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Commit 75d66ffb added backing device health checks and as a part
of these checks, check_events() block ops template call is invoked in
dm-zoned mapping path as well as in reclaim and flush path. Calling
check_events() with ATA or SCSI backing devices introduces a blocking
scsi_test_unit_ready() call being made in sd_check_events(). Even though
the overhead of calling scsi_test_unit_ready() is small for ATA zoned
devices, it is much larger for SCSI and it affects performance in a very
negative way.

Fix this performance regression by executing check_events() only in case
of any I/O errors. The function dmz_bdev_is_dying() is modified to call
only blk_queue_dying(), while calls to check_events() are made in a new
helper function, dmz_check_bdev().
Reported-by: zhangxiaoxu <zhangxiaoxu5@huawei.com>
Fixes: 75d66ffb ("dm zoned: properly handle backing device failure")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Add a limited write failure mode which allows a write to a block to fail
a specified amount of times, prior to remapping.  The "addbadblock"
message is extended to allow specifying the limited number of times a
write fails.

Example: add bad block on block 60, with 5 write failures:
  dmsetup message 0 dust1 addbadblock 60 5

The write failure counter will be printed for newly added bad blocks.
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

In the dust_map_read() and dust_map() functions, change the
return code variable "ret" to "r", to match the convention of the
other device-mapper targets.
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Change the "result" variables to "r" in dust_status() and
dust_message().
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

If we are in a place where it is known that interrupts are enabled,
functions spin_lock_irq/spin_unlock_irq should be used instead of
spin_lock_irqsave/spin_unlock_irqrestore.

spin_lock_irq and spin_unlock_irq are faster because they don't need to
push and pop the flags register.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Replace spin_lock_irqsave/irqrestore with spin_lock_irq/spin_unlock_irq.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

If we are in a place where it is known that interrupts are enabled,
functions spin_lock_irq/spin_unlock_irq should be used instead of
spin_lock_irqsave/spin_unlock_irqrestore.

spin_lock_irq and spin_unlock_irq are faster because they don't need to
push and pop the flags register.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Introduce bucket_lock_irq() and bucket_unlock_irq() helpers and use them
in places where it is known that interrupts are enabled.
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

If we are in a place where it is known that interrupts are enabled,
functions spin_lock_irq/spin_unlock_irq should be used instead of
spin_lock_irqsave/spin_unlock_irqrestore.

spin_lock_irq and spin_unlock_irq are faster because they don't need to
push and pop the flags register.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Call writecache_flush() on REQ_FUA in writecache_map().

Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Maged Mokhtar <mmokhtar@petasan.org>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This fixes coverity warning CID 1454301.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct stripe_c {
        ...
        struct stripe stripe[0];
};

In this case alloc_context() and dm_array_too_big() are removed and
replaced by the direct use of the struct_size() helper in kmalloc().

Notice that open-coded form is prone to type mistakes.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pass already deciphered state into rs_get_progress, simplify recovery offset
definition and combine two st_resync, st_reshape conditionals into one as is
already the case with st_check and st_repair.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

rs_setup_recovery() sets the starting recovery offset.

Drop superfluous rs_setup_recovery() and replace with __rs_setup_recovery().
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This fixes a flaw causing raid set extensions not to be synchronized
in case the MD bitmap resize required additional pages to be allocated.

Also share resize code in the raid constructor between
new size changes and those occuring during recovery.

Bump the target version to define the change and document
it in Documentation/admin-guide/device-mapper/dm-raid.rst.
Reported-by: Steve D <steved424@gmail.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Add a size argument to rs_set_dev_and_array_sectors as prerequisite
to fixing grown device resynchronization not occuring when new MD
bitmap pages have to be allocated as a result of the extension in
a follwup patch.

Also avoid code duplication by using rs_set_rdev_sectors
in the aforementioned function.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Partitioned request-based devices cannot be used as underlying devices
for request-based DM because no partition offsets are added to each
incoming request.  As such, until now, stacking on partitioned devices
would _always_ result in data corruption (e.g. wiping the partition
table, writing to other partitions, etc).  Fix this by disallowing
request-based stacking on partitions.

While at it, since all .request_fn support has been removed from block
core, remove legacy dm-table code that differentiated between blk-mq and
.request_fn request-based.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull USB fixes from Greg KH:
 "The USB sub-maintainers woke up this past week and sent a bunch of
  tiny fixes. Here are a lot of small patches that that resolve a bunch
  of reported issues in the USB core, drivers, serial drivers, gadget
  drivers, and of course, xhci :)

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
  usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
  usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host
  usb: cdns3: gadget: reset EP_CLAIMED flag while unloading
  USB: serial: whiteheat: fix line-speed endianness
  USB: serial: whiteheat: fix potential slab corruption
  USB: gadget: Reject endpoints with 0 maxpacket value
  UAS: Revert commit 3ae62a42 ("UAS: fix alignment of scatter/gather segments")
  usb-storage: Revert commit 747668db ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
  usbip: Fix free of unallocated memory in vhci tx
  usbip: tools: Fix read_usb_vudc_device() error path handling
  usb: xhci: fix __le32/__le64 accessors in debugfs code
  usb: xhci: fix Immediate Data Transfer endianness
  xhci: Fix use-after-free regression in xhci clear hub TT implementation
  USB: ldusb: fix control-message timeout
  USB: ldusb: use unsigned size format specifiers
  USB: ldusb: fix ring-buffer locking
  USB: Skip endpoints with 0 maxpacket length
  usb: cdns3: gadget: Don't manage pullups
  usb: dwc3: remove the call trace of USBx_GFLADJ
  usb: gadget: configfs: fix concurrent issue between composite APIs
  ...

Pull cifs fix from Steve French:
 "A small smb3 memleak fix"

* tag '5.4-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  fix memory leak in large read decrypt offload

Merge tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix read timeout problem in ina3221 driver

 - Fix wrong bitmask in nct7904 driver

* tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ina3221) Fix read timeout issue
  hwmon: (nct7904) Fix the incorrect value of vsen_mask & tcpu_mask & temp_mode in nct7904_data struct.

Merge tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "It turned out that relying solely on drivers storing all the PWM state
  in hardware was a little premature and causes a number of subtle (and
  some not so subtle) regressions. Revert the offending patch for now"

* tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  Revert "pwm: Let pwm_get_state() return the last implemented state"

Pull SCSI fixes from James Bottomley:
 "Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
  and one core change in sd that fixes an I/O failure on DIF type 3
  devices"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: stop timer in shutdown path
  scsi: sd: define variable dif as unsigned int instead of bool
  scsi: target: cxgbit: Fix cxgbit_fw4_ack()
  scsi: qla2xxx: Fix partial flash write of MBI
  scsi: qla2xxx: Initialized mailbox to prevent driver load failure
  scsi: lpfc: Honor module parameter lpfc_use_adisc
  scsi: ufs-bsg: Wake the device before sending raw upiu commands
  scsi: lpfc: Check queue pointer before use
  scsi: qla2xxx: fixup incorrect usage of host_byte

Pull powerpc fixes from Michael Ellerman:
 "Our recent cleanup of EEH led to an oops on bare metal machines when
  the cxl (CAPI) driver creates virtual devices for an attached FPGA
  accelerator.

  The "secure virtual machine" support we added in v5.4 had a bug if the
  kernel was relocated (moved during boot), in those cases the signature
  of the kernel text wouldn't verify and the Ultravisor would refuse to
  run the VM.

  A recent change to disable interrupts before calling
  arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline
  code to always trigger.

  The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the
  address range crossed a segment (256MB) boundary which could lead to
  spurious faults.

  Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson,
  Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann"

* tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Fix CPU idle to be called with IRQs disabled
  powerpc/prom_init: Undo relocation before entering secure mode
  powerpc/powernv/eeh: Fix oops when probing cxl devices
  powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.

Pull s390 fixes from Vasily Gorbik:

 - Fix cpu idle time accounting

 - Fix stack unwinder case when both pt_regs and sp are specified

 - Fix information leak via cmm timeout proc handler

* tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/idle: fix cpu idle time calculation
  s390/unwind: fix mixing regs and sp
  s390/cmm: fix information leak in cmm_timeout_handler()

Pull networking fixes from David Miller:

 1) Fix free/alloc races in batmanadv, from Sven Eckelmann.

 2) Several leaks and other fixes in kTLS support of mlx5 driver, from
    Tariq Toukan.

 3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
    Høiland-Jørgensen.

 4) Add an r8152 device ID, from Kazutoshi Noguchi.

 5) Missing include in ipv6's addrconf.c, from Ben Dooks.

 6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
    easily infer the 32-bit secret otherwise etc.

 7) Several netdevice nesting depth fixes from Taehee Yoo.

 8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
    when doing lockless skb_queue_empty() checks, and accessing
    sk_napi_id/sk_incoming_cpu lockless as well.

 9) Fix jumbo packet handling in RXRPC, from David Howells.

10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.

11) Fix DMA synchronization in gve driver, from Yangchun Fu.

12) Several bpf offload fixes, from Jakub Kicinski.

13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.

14) Fix ping latency during high traffic rates in hisilicon driver, from
    Jiangfent Xiao.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
  net: fix installing orphaned programs
  net: cls_bpf: fix NULL deref on offload filter removal
  selftests: bpf: Skip write only files in debugfs
  selftests: net: reuseport_dualstack: fix uninitalized parameter
  r8169: fix wrong PHY ID issue with RTL8168dp
  net: dsa: bcm_sf2: Fix IMP setup for port different than 8
  net: phylink: Fix phylink_dbg() macro
  gve: Fixes DMA synchronization.
  inet: stop leaking jiffies on the wire
  ixgbe: Remove duplicate clear_bit() call
  Documentation: networking: device drivers: Remove stray asterisks
  e1000: fix memory leaks
  i40e: Fix receive buffer starvation for AF_XDP
  igb: Fix constant media auto sense switching when no cable is connected
  net: ethernet: arc: add the missed clk_disable_unprepare
  igb: Enable media autosense for the i350.
  igb/igc: Don't warn on fatal read failures when the device is removed
  tcp: increase tcp_max_syn_backlog max value
  net: increase SOMAXCONN to 4096
  netdevsim: Fix use-after-free during device dismantle
  ...

Pull NFS client bugfixes from Anna Schumaker:
 "This contains two delegation fixes (with the RCU lock leak fix marked
  for stable), and three patches to fix destroying the the sunrpc back
  channel.

  Stable bugfixes:

   - Fix an RCU lock leak in nfs4_refresh_delegation_stateid()

  Other fixes:

   - The TCP back channel mustn't disappear while requests are
     outstanding

   - The RDMA back channel mustn't disappear while requests are
     outstanding

   - Destroy the back channel when we destroy the host transport

   - Don't allow a cached open with a revoked delegation"

* tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
  NFSv4: Don't allow a cached open with a revoked delegation
  SUNRPC: Destroy the back channel when we destroy the host transport
  SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
  SUNRPC: The TCP back channel mustn't disappear while requests are outstanding

Pull block fixes from Jens Axboe:

 - Two small nvme fixes, one is a fabrics connection fix, the other one
   a cleanup made possible by that fix (Anton, via Keith)

 - Fix requeue handling in umb ubd (Anton)

 - Fix spin_lock_irq() nesting in blk-iocost (Dan)

 - Three small io_uring fixes:
     - Install io_uring fd after done with ctx (me)
     - Clear ->result before every poll issue (me)
     - Fix leak of shadow request on error (Pavel)

* tag 'for-linus-20191101' of git://git.kernel.dk/linux-block:
  iocost: don't nest spin_lock_irq in ioc_weight_write()
  io_uring: ensure we clear io_kiocb->result before each issue
  um-ubd: Entrust re-queue to the upper layers
  nvme-multipath: remove unused groups_only mode in ana log
  nvme-multipath: fix possible io hang after ctrl reconnect
  io_uring: don't touch ctx in setup after ring fd install
  io_uring: Fix leaked shadow_req

Pull RISC-V fixes from Paul Walmsley:
 "One fix for PCIe users:

   - Fix legacy PCI I/O port access emulation

  One set of cleanups:

   - Resolve most of the warnings generated by sparse across arch/riscv.
     No functional changes

  And one MAINTAINERS update:

   - Update Palmer's E-mail address"

* tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  MAINTAINERS: Change to my personal email address
  RISC-V: Add PCIe I/O BAR memory mapping
  riscv: for C functions called only from assembly, mark with __visible
  riscv: fp: add missing __user pointer annotations
  riscv: add missing header file includes
  riscv: mark some code and data as file-static
  riscv: init: merge split string literals in preprocessor directive
  riscv: add prototypes for assembly language functions from head.S

Pull parisc fix from Helge Deller:
 "Fix a parisc kernel crash with ftrace functions when compiled without
  frame pointers"

* 'parisc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix frame pointer in ftrace_regs_caller()