This patch adds a new pseudo-register KVM_REG_ARM64_SVE_VLS to
allow userspace to set and query the set of vector lengths visible
to the guest.

In the future, multiple register slices per SVE register may be
visible through the ioctl interface.  Once the set of slices has
been determined we would not be able to allow the vector length set
to be changed any more, in order to avoid userspace seeing
inconsistent sets of registers.  For this reason, this patch adds
support for explicit finalization of the SVE configuration via the
KVM_ARM_VCPU_FINALIZE ioctl.

Finalization is the proper place to allocate the SVE register state
storage in vcpu->arch.sve_state, so this patch adds that as
appropriate.  The data is freed via kvm_arch_vcpu_uninit(), which
was previously a no-op on arm64.

To simplify the logic for determining what vector lengths can be
supported, some code is added to KVM init to work this out, in the
kvm_arm_init_arch_resources() hook.

The KVM_REG_ARM64_SVE_VLS pseudo-register is not exposed yet.
Subsequent patches will allow SVE to be turned on for guest vcpus,
making it visible.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Some aspects of vcpu configuration may be too complex to be
completed inside KVM_ARM_VCPU_INIT.  Thus, there may be a
requirement for userspace to do some additional configuration
before various other ioctls will work in a consistent way.

In particular this will be the case for SVE, where userspace will
need to negotiate the set of vector lengths to be made available to
the guest before the vcpu becomes fully usable.

In order to provide an explicit way for userspace to confirm that
it has finished setting up a particular vcpu feature, this patch
adds a new ioctl KVM_ARM_VCPU_FINALIZE.

When userspace has opted into a feature that requires finalization,
typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a
matching call to KVM_ARM_VCPU_FINALIZE is now required before
KVM_RUN or KVM_GET_REG_LIST is allowed.  Individual features may
impose additional restrictions where appropriate.

No existing vcpu features are affected by this, so current
userspace implementations will continue to work exactly as before,
with no need to issue KVM_ARM_VCPU_FINALIZE.

As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a
placeholder: no finalizable features exist yet, so ioctl is not
required and will always yield EINVAL.  Subsequent patches will add
the finalization logic to make use of this ioctl for SVE.

No functional change for existing userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This patch adds a kvm_arm_init_arch_resources() hook to perform
subarch-specific initialisation when starting up KVM.

This will be used in a subsequent patch for global SVE-related
setup on arm64.

No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

KVM will need to interrogate the set of SVE vector lengths
available on the system.

This patch exposes the relevant bits to the kernel, along with a
sve_vq_available() helper to check whether a particular vector
length is supported.

__vq_to_bit() and __bit_to_vq() are not intended for use outside
these functions: now that these are exposed outside fpsimd.c, they
are prefixed with __ in order to provide an extra hint that they
are not intended for general-purpose use.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This patch includes the SVE register IDs in the list returned by
KVM_GET_REG_LIST, as appropriate.

On a non-SVE-enabled vcpu, no new IDs are added.

On an SVE-enabled vcpu, IDs for the FPSIMD V-registers are removed
from the list, since userspace is required to access the Z-
registers instead in order to access the V-register content.  For
the variably-sized SVE registers, the appropriate set of slice IDs
are enumerated, depending on the maximum vector length for the
vcpu.

As it currently stands, the SVE architecture never requires more
than one slice to exist per register, so this patch adds no
explicit support for enumerating multiple slices.  The code can be
extended straightforwardly to support this in the future, if
needed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This patch adds the following registers for access via the
KVM_{GET,SET}_ONE_REG interface:

 * KVM_REG_ARM64_SVE_ZREG(n, i) (n = 0..31) (in 2048-bit slices)
 * KVM_REG_ARM64_SVE_PREG(n, i) (n = 0..15) (in 256-bit slices)
 * KVM_REG_ARM64_SVE_FFR(i) (in 256-bit slices)

In order to adapt gracefully to future architectural extensions,
the registers are logically divided up into slices as noted above:
the i parameter denotes the slice index.

This allows us to reserve space in the ABI for future expansion of
these registers.  However, as of today the architecture does not
permit registers to be larger than a single slice, so no code is
needed in the kernel to expose additional slices, for now.  The
code can be extended later as needed to expose them up to a maximum
of 32 slices (as carved out in the architecture itself) if they
really exist someday.

The registers are only visible for vcpus that have SVE enabled.
They are not enumerated by KVM_GET_REG_LIST on vcpus that do not
have SVE.

Accesses to the FPSIMD registers via KVM_REG_ARM_CORE is not
allowed for SVE-enabled vcpus: SVE-aware userspace can use the
KVM_REG_ARM64_SVE_ZREG() interface instead to access the same
register state.  This avoids some complex and pointless emulation
in the kernel to convert between the two views of these aliased
registers.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to avoid the pointless complexity of maintaining two ioctl
register access views of the same data, this patch blocks ioctl
access to the FPSIMD V-registers on vcpus that support SVE.

This will make it more straightforward to add SVE register access
support.

Since SVE is an opt-in feature for userspace, this will not affect
existing users.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In preparation for adding logic to filter out some KVM_REG_ARM_CORE
registers from the KVM_GET_REG_LIST output, this patch factors out
the core register enumeration into a separate function and rebuilds
num_core_regs() on top of it.

This may be a little more expensive (depending on how good a job
the compiler does of specialising the code), but KVM_GET_REG_LIST
is not a hot path.

This will make it easier to consolidate ID filtering code in one
place.

No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

arch/arm64/kvm/guest.c uses the string functions, but the
corresponding header is not included.

We seem to get away with this for now, but for completeness this
patch adds the #include, in preparation for adding yet more
memset() calls.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The Arm SVE architecture defines registers that are up to 2048 bits
in size (with some possibility of further future expansion).

In order to avoid the need for an excessively large number of
ioctls when saving and restoring a vcpu's registers, this patch
adds a #define to make support for individual 2048-bit registers
through the KVM_{GET,SET}_ONE_REG ioctl interface official.  This
will allow each SVE register to be accessed in a single call.

There are sufficient spare bits in the register id size field for
this change, so there is no ABI impact, providing that
KVM_GET_REG_LIST does not enumerate any 2048-bit register unless
userspace explicitly opts in to the relevant architecture-specific
features.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to give each vcpu its own view of the SVE registers, this
patch adds context storage via a new sve_state pointer in struct
vcpu_arch.  An additional member sve_max_vl is also added for each
vcpu, to determine the maximum vector length visible to the guest
and thus the value to be configured in ZCR_EL2.LEN while the vcpu
is active.  This also determines the layout and size of the storage
in sve_state, which is read and written by the same backend
functions that are used for context-switching the SVE state for
host tasks.

On SVE-enabled vcpus, SVE access traps are now handled by switching
in the vcpu's SVE context and disabling the trap before returning
to the guest.  On other vcpus, the trap is not handled and an exit
back to the host occurs, where the handle_sve() fallback path
reflects an undefined instruction exception back to the guest,
consistently with the behaviour of non-SVE-capable hardware (as was
done unconditionally prior to this patch).

No SVE handling is added on non-VHE-only paths, since VHE is an
architectural and Kconfig prerequisite of SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This patch adds the necessary support for context switching ZCR_EL1
for each vcpu.

ZCR_EL1 is trapped alongside the FPSIMD/SVE registers, so it makes
sense for it to be handled as part of the guest FPSIMD/SVE context
for context switch purposes instead of handling it as a general
system register.  This means that it can be switched in lazily at
the appropriate time.  No effort is made to track host context for
this register, since SVE requires VHE: thus the hosts's value for
this register lives permanently in ZCR_EL2 and does not alias the
guest's value at any time.

The Hyp switch and fpsimd context handling code is extended
appropriately.

Accessors are added in sys_regs.c to expose the SVE system
registers and ID register fields.  Because these need to be
conditionally visible based on the guest configuration, they are
implemented separately for now rather than by use of the generic
system register helpers.  This may be abstracted better later on
when/if there are more features requiring this model.

ID_AA64ZFR0_EL1 is RO-RAZ for MRS/MSR when SVE is disabled for the
guest, but for compatibility with non-SVE aware KVM implementations
the register should not be enumerated at all for KVM_GET_REG_LIST
in this case.  For consistency we also reject ioctl access to the
register.  This ensures that a non-SVE-enabled guest looks the same
to userspace, irrespective of whether the kernel KVM implementation
supports SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Some optional features of the Arm architecture add new system
registers that are not present in the base architecture.

Where these features are optional for the guest, the visibility of
these registers may need to depend on some runtime configuration,
such as a flag passed to KVM_ARM_VCPU_INIT.

For example, ZCR_EL1 and ID_AA64ZFR0_EL1 need to be hidden if SVE
is not enabled for the guest, even though these registers may be
present in the hardware and visible to the host at EL2.

Adding special-case checks all over the place for individual
registers is going to get messy as the number of conditionally-
visible registers grows.

In order to help solve this problem, this patch adds a new sysreg
method visibility() that can be used to hook in any needed runtime
visibility checks.  This method can currently return
REG_HIDDEN_USER to inhibit enumeration and ioctl access to the
register for userspace, and REG_HIDDEN_GUEST to inhibit runtime
access by the guest using MSR/MRS.  Wrappers are added to allow
these flags to be conveniently queried.

This approach allows a conditionally modified view of individual
system registers such as the CPU ID registers, in addition to
completely hiding register where appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Architecture features that are conditionally visible to the guest
will require run-time checks in the ID register accessor functions.
In particular, read_id_reg() will need to perform checks in order
to generate the correct emulated value for certain ID register
fields such as ID_AA64PFR0_EL1.SVE for example.

This patch propagates vcpu into read_id_reg() so that future
patches can add run-time checks on the guest configuration here.

For now, there is no functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Since SVE will be enabled or disabled on a per-vcpu basis, a flag
is needed in order to track which vcpus have it enabled.

This patch adds a suitable flag and a helper for checking it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The current FPSIMD/SVE context handling support for non-task (i.e.,
KVM vcpu) contexts does not take SVE into account.  This means that
only task contexts can safely use SVE at present.

In preparation for enabling KVM guests to use SVE, it is necessary
to keep track of SVE state for non-task contexts too.

This patch adds the necessary support, removing assumptions from
the context switch code about the location of the SVE context
storage.

When binding a vcpu context, its vector length is arbitrarily
specified as SVE_VL_MIN for now.  In any case, because TIF_SVE is
presently cleared at vcpu context bind time, the specified vector
length will not be used for anything yet.  In later patches TIF_SVE
will be set here as appropriate, and the appropriate maximum vector
length for the vcpu will be passed when binding.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Due to the way the effective SVE vector length is controlled and
trapped at different exception levels, certain mismatches in the
sets of vector lengths supported by different physical CPUs in the
system may prevent straightforward virtualisation of SVE at parity
with the host.

This patch analyses the extent to which SVE can be virtualised
safely without interfering with migration of vcpus between physical
CPUs, and rejects late secondary CPUs that would erode the
situation further.

It is left up to KVM to decide what to do with this information.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The roles of sve_init_vq_map(), sve_update_vq_map() and
sve_verify_vq_map() are highly non-obvious to anyone who has not dug
through cpufeatures.c in detail.

Since the way these functions interact with each other is more
important here than a full understanding of the cpufeatures code, this
patch adds comments to make the functions' roles clearer.

No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

kvm_host.h uses some declarations from other headers that are
currently included by accident, without an explicit #include.

This patch adds a few #includes that are clearly missing.  Although
the header builds without them today, this should help to avoid
future surprises.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

kvm_arm_num_regs() adds together various partial register counts in
a freeform sum expression, which makes it harder than necessary to
read diffs that add, modify or remove a single term in the sum
(which is expected to the common case under maintenance).

This patch refactors the code to add the term one per line, for
maximum readability.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

__fpsimd_enabled() no longer exists, but a dangling declaration has
survived in kvm_hyp.h.

This patch gets rid of it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This patch updates fpsimd_flush_task_state() to mirror the new
semantics of fpsimd_flush_cpu_state() introduced by commit
d8ad71fa ("arm64: fpsimd: Fix TIF_FOREIGN_FPSTATE after
invalidating cpu regs").  Both functions now implicitly set
TIF_FOREIGN_FPSTATE to indicate that the task's FPSIMD state is not
loaded into the cpu.

As a side-effect, fpsimd_flush_task_state() now sets
TIF_FOREIGN_FPSTATE even for non-running tasks.  In the case of
non-running tasks this is not useful but also harmless, because the
flag is live only while the corresponding task is running.  This
function is not called from fast paths, so special-casing this for
the task == current case is not really worth it.

Compiler barriers previously present in restore_sve_fpsimd_context()
are pulled into fpsimd_flush_task_state() so that it can be safely
called with preemption enabled if necessary.

Explicit calls to set TIF_FOREIGN_FPSTATE that accompany
fpsimd_flush_task_state() calls and are now redundant are removed
as appropriate.

fpsimd_flush_task_state() is used to get exclusive access to the
representation of the task's state via task_struct, for the purpose
of replacing the state.  Thus, the call to this function should
happen before manipulating fpsimd_state or sve_state etc. in
task_struct.  Anomalous cases are reordered appropriately in order
to make the code more consistent, although there should be no
functional difference since these cases are protected by
local_bh_disable() anyway.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Since the the sizes of individual members of the core arm64
registers vary, the list of register encodings that make sense is
not a simple linear sequence.

To clarify which encodings to use, this patch adds a brief list
to the documentation.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted

Pull scheduler updates from Thomas Gleixner:
 "Third more careful attempt for this set of fixes:

   - Prevent a 32bit math overflow in the cpufreq code

   - Fix a buffer overflow when scanning the cgroup2 cpu.max property

   - A set of fixes for the NOHZ scheduler logic to prevent waking up
     CPUs even if the capacity of the busy CPUs is sufficient along with
     other tweaks optimizing the behaviour for asymmetric systems
     (big/little)"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Skip LLC NOHZ logic for asymmetric systems
  sched/fair: Tune down misfit NOHZ kicks
  sched/fair: Comment some nohz_balancer_kick() kick conditions
  sched/core: Fix buffer overflow in cgroup2 property cpu.max
  sched/cpufreq: Fix 32-bit math overflow

Pull perf updates from Thomas Gleixner:
 "A larger set of perf updates.

  Not all of them are strictly fixes, but that's solely the tip
  maintainers fault as they let the timely -rc1 pull request fall
  through the cracks for various reasons including travel. So I'm
  sending this nevertheless because rebasing and distangling fixes and
  updates would be a mess and risky as well. As of tomorrow, a strict
  fixes separation is happening again. Sorry for the slip-up.

  Kernel:

   - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
     consumers of the mmap event get what they requested.

  Tools:

   - A larger set of updates to perf record/report/scripts vs. time
     stamp handling

   - More Python3 fixups

   - A pile of memory leak plumbing

   - perf BPF improvements and fixes

   - Finalize the perf.data directory storage"

[ Note: the kernel part is strictly a fix, the updates are purely to
  tooling       - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf bpf: Show more BPF program info in print_bpf_prog_info()
  perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
  perf tools: Save bpf_prog_info and BTF of new BPF programs
  perf evlist: Introduce side band thread
  perf annotate: Enable annotation of BPF programs
  perf build: Check what binutils's 'disassembler()' signature to use
  perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
  perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
  perf feature detection: Add -lopcodes to feature-libbfd
  perf top: Add option --no-bpf-event
  perf bpf: Save BTF information as headers to perf.data
  perf bpf: Save BTF in a rbtree in perf_env
  perf bpf: Save bpf_prog_info information as headers to perf.data
  perf bpf: Save bpf_prog_info in a rbtree in perf_env
  perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
  perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
  bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
  tools lib bpf: Introduce bpf_program__get_prog_info_linear()
  perf record: Replace option --bpf-event with --no-bpf-event
  perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
  ...

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

Pull locking fixes from Thomas Gleixner:
 "Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

Pull core fixes from Thomas Gleixner:
 "Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

Pull thermal management fixes from Zhang Rui:

 - Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

 - Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

 - Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

 - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

 - A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

Pull smb3 fixes from Steve French:

 - two fixes for stable for guest mount problems with smb3.1.1

 - two fixes for crediting (SMB3 flow control) on resent requests

 - a byte range lock leak fix

 - two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

Pull auxdisplay updates from Miguel Ojeda:
 "A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

Pull SCSI fixes from James Bottomley:
 "Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session

Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru

Pull io_uring fixes and improvements from Jens Axboe:
 "The first five in this series are heavily inspired by the work Al did
  on the aio side to fix the races there.

  The last two re-introduce a feature that was in io_uring before it got
  merged, but which I pulled since we didn't have a good way to have
  BVEC iters that already have a stable reference. These aren't
  necessarily related to block, it's just how io_uring pins fixed
  buffers"

* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
  block: add BIO_NO_PAGE_REF flag
  iov_iter: add ITER_BVEC_FLAG_NO_REF flag
  io_uring: mark me as the maintainer
  io_uring: retry bulk slab allocs as single allocs
  io_uring: fix poll races
  io_uring: fix fget/fput handling
  io_uring: add prepped flag
  io_uring: make io_read/write return an integer
  io_uring: use regular request ref counts

Pull block fixes from Jens Axboe:
 "A set of fixes/changes that should go into this series. This contains:

   - Kernel doc / comment updates (Bart, Shenghui)

   - Un-export of core-only used function (Bart)

   - Fix race on loop file access (Dongli)

   - pf/pcd queue cleanup fixes (me)

   - Use appropriate helper for RESTART bit set (Yufen)

   - Use named identifier for classic poll (Yufen)"

* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
  sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
  blkcg: Fix kernel-doc warnings
  blk-iolatency: #include "blk.h"
  block: Unexport blk_mq_add_to_requeue_list()
  block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
  blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
  loop: access lo_backing_file only when the loop device is Lo_bound
  blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
  paride/pcd: cleanup queues when detection fails
  paride/pf: cleanup queues when detection fails

Pull ceph fixes from Ilya Dryomov:
 "A follow up for the new alloc_size logic and a blacklisting fix,
  marked for stable"

* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
  rbd: drop wait_for_latest_osdmap()
  libceph: wait for latest osdmap in ceph_monc_blacklist_add()
  rbd: set io_min, io_opt and discard_granularity to alloc_size