- 22 Apr, 2006 12 commits
-
-
Kylene Jo Hall authored
To assist with chip management and better support the possibility of having multiple TPMs in the system of the same kind, the struct tpm_vendor_specific member of the tpm_chip was changed from a pointer to an instance. This patch changes that declaration and fixes up all accesses to the structure member except in tpm_infineon which is coming in a patch from Marcel Selhorst. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Kylene Jo Hall authored
Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. Signed-off-by:
-
Kylene Jo Hall authored
The following patch set contains numerous changes to the base tpm driver (tpm.c) to support the next generation of TPM chips. The changes include new sysfs files because of more relevant data being available, a function to access the timeout and duration values for the chip, and changes to make use of those duration values. Duration in the TPM specification is defined as the maximum amount of time the chip could take to return the results. Commands are in one of three categories short, medium and long. Also included are cleanups of how the commands for the sysfs files are composed to reduce a bunch of redundant arrays. This patch: Fix minor spacing issues. Signed-off-by:
-
Kylene Jo Hall authored
A string corresponding to the tcpa_pc_event_id POST_CONTENTS was missing causing an overflow bug when access was attempted in the get_event_name function. This bug was found by Coverity. Signed-off-by:
-
Kylene Jo Hall authored
The eventname was kmalloc'd and not freed in the *_show functions. This bug was found by Coverity. Signed-off-by:
-
Jan Kara authored
reiserfs_cache_default_acl() should return whether we successfully found the acl or not. We have to return correct value even if reiserfs_get_acl() returns error code and not just 0. Otherwise callers such as reiserfs_mkdir() can unnecessarily lock the xattrs and later functions such as reiserfs_new_inode() fail to notice that we have already taken the lock and try to take it again with obvious consequences. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <reiserfs-dev@namesys.com> Signed-off-by:
-
akpm@osdl.org authored
from: Greg Howard <ghoward@sgi.com> Fix Altix system controller (snsc) device names to include the slot number of the blade whose associated system controller is the target of the device interface. Including the slot number avoids a problem we're currently having where slots within the same enclosure are attempting to create multiple kobjects with identical names. Signed-off-by:
Greg Howard <ghoward@sgi.com> Signed-off-by:
-
Mike Waychison authored
We do this by removing a micro-optimization that tries to avoid grabbing the iommu_bitmap_lock spinlock and using a bus-locked operation. This still races with other simultaneous alloc_iommu or free_iommu(size > 1) which both use bus-unlocked operations. The end result of this race is eventually ending up with an iommu_gart_bitmap that has bits errornously set all over, making large contiguous iommu space allocations fail with 'PCI-DMA: Out of IOMMU space'. Signed-off-by:
Mike Waychison <mikew@google.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
This quietens warnings and actually fixes a bug. The unwind tables would come out wrong without -32, causing pthread cancellation during them to crash in the gcc runtime. The problem seems to only happen with newer binutils (it doesn't happen with 2.16.91.0.2 but happens wit 2.16.91.0.5) Thanks to David Altobelli <david.altobelli@hp.com> and Brian Baker <Brian.B@hp.com> for test case and initial analysis. Signed-off-by:
-
Lee Schermerhorn authored
Basic problem: pages of a shared memory segment can only be migrated once. In 2.6.16 through 2.6.17-rc1, shared memory mappings do not have a migratepage address space op. Therefore, migrate_pages() falls back to default processing. In this path, it will try to pageout() dirty pages. Once a shared memory page has been migrated it becomes dirty, so migrate_pages() will try to page it out. However, because the page count is 3 [cache + current + pte], pageout() will return PAGE_KEEP because is_page_cache_freeable() returns false. This will abort all subsequent migrations. This patch adds a migratepage address space op to shared memory segments to avoid taking the default path. We use the "migrate_page()" function because it knows how to migrate dirty pages. This allows shared memory segment pages to migrate, subject to other conditions such as # pte's referencing the page [page_mapcount(page)], when requested. I think this is safe. If we're migrating a shared memory page, then we found the page via a page table, so it must be in memory. Can be verified with memtoy and the shmem-mbind-test script, both available at: http://free.linux.hp.com/~lts/Tools/Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Andy Whitcroft authored
Seems we are trying to init the node_mem_map when we don't need to, for example when SPARSEMEM is enabled. This causes the error below during compilation. Use CONFIG_FLAT_NODE_MEM_MAP to gate allocation and init. arch/x86_64/mm/numa.c: In function `setup_node_zones': arch/x86_64/mm/numa.c:191: error: structure has no member named `node_mem_map' Signed-off-by:Andy Whitcroft <apw@shadowen.org> Acked-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Tilman Schmidt authored
Fix a possible Oops in the Siemens Gigaset base driver when the device is unplugged while an ISDN connection is still active, and makes sure that the isdn4linux link level (LL) is properly informed if a connection is broken by the USB cable being unplugged. - Avoid unsafe checks of URB status fields outside the URB completion handlers, keep track of in-use URBs myself instead. - If an isochronous transfer URB completes with status==0, also check the status of the frame descriptors. - Verify length of interrupt messages received from the device. - Align the length limit on transmitted AT commands with the device documentation. - In case of AT response receive overrun, keep newly arrived instead of old unread data. - Remove redundant check of device ID in the USB probe function. - Correct and improve some comments and formatting. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Acked-by:
Hansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
- 20 Apr, 2006 28 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) [PATCH] wext: Fix RtNetlink ENCODE security permissions [PATCH] bcm43xx: iw_priv_args names should be <16 characters [PATCH] bcm43xx: sysfs code cleanup [PATCH] bcm43xx: fix pctl slowclock limit calculation [PATCH] bcm43xx: fix dyn tssi2dbm memleak [PATCH] bcm43xx: fix config menu alignment [PATCH] bcm43xx wireless: fix printk format warnings [PATCH] softmac: report when scanning has finished [PATCH] softmac: fix event sending [PATCH] softmac: handle iw_mode properly [PATCH] softmac: dont send out packets while scanning [PATCH] softmac: return -EAGAIN from getscan while scanning [PATCH] bcm43xx: set trans_start on TX to prevent bogus timeouts [PATCH] orinoco: fix truncating commsquality RID with the latest Symbol firmware [PATCH] softmac: fix spinlock recursion on reassoc [PATCH] Revert NET_RADIO Kconfig title change [PATCH] wext: Fix IWENCODEEXT security permissions [PATCH] wireless/atmel: send WEXT scan completion events [PATCH] wireless/airo: clean up WEXT association and scan events [PATCH] softmac uses Wiress Ext. ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [EBTABLES]: Clean up vmalloc usage in net/bridge/netfilter/ebtables.c [NET]: Add skb->truesize assertion checking. [TCP]: Account skb overhead in tcp_fragment [SUNGEM]: Marvell PHY suspend. [LLC]: Use pskb_trim_rcsum() in llc_fixup_skb(). [NET]: sockfd_lookup_light() returns random error for -EBADFD
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] for_each_possible_cpu [ARM] add_memory() build fix [ARM] 3483/1: ixp23xx: update defconfig to 2.6.17-rc2 [ARM] 3482/1: ixp2000: update defconfig to 2.6.17-rc2 [ARM] 3481/1: ep93xx: update defconfig to 2.6.17-rc2 [ARM] 3480/1: ixp4xx: fix irq2gpio array type
-
Jeff Garzik authored
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
-
Sergei Shtylyov authored
Correct the base address of the Realtek RTL8019AS chip on the Toshiba RBTX4938 board -- this should make the driver work at least when CONFIG_PCI is enabled. Signed-off-by:
Yuri Shpilevsky <yshpilevsky@ru.mvista.com> Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Morton authored
This is back again. Offending patch is x86_64-mm-hotadd-reserve.patch arch/arm/kernel/setup.c:435: error: conflicting types for 'add_memory' include/linux/memory_hotplug.h:102: error: previous declaration of 'add_memory' was here arch/arm/kernel/setup.c:435: error: conflicting types for 'add_memory' include/linux/memory_hotplug.h:102: error: previous declaration of 'add_memory' was here Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek The irq2gpio array was recently converted from an array of ints to an array of chars (by patch 3368/1.) However, this array contains elements that are -1, and on ARM, the char type is unsigned by default, so this patch broke the GPIO check in ixp4xx_set_irq_type. Change the 'char' to be a 'signed char' to fix this. Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Signed-off-by:
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] block/elevator.c: remove unused exports [PATCH] splice: fix smaller sized splice reads [PATCH] Don't inherit ->splice_pipe across forks [patch] cleanup: use blk_queue_stopped [PATCH] Document online io scheduler switching
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: __NR_sys_splice --> __NR_splice
-
Eric Dumazet authored
It seems latest kernel has a wrong/missing __read_mostly implementation for x86_64 __read_mostly macro should be declared outside of #if CONFIG_X86_VSMP block Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Andi Kleen authored
AMD K7/K8 CPUs only save/restore the FOP/FIP/FDP x87 registers in FXSAVE when an exception is pending. This means the value leak through context switches and allow processes to observe some x87 instruction state of other processes. This was actually documented by AMD, but nobody recognized it as being different from Intel before. The fix first adds an optimization: instead of unconditionally calling FNCLEX after each FXSAVE test if ES is pending and skip it when not needed. Then do a x87 load from a kernel variable to clear FOP/FIP/FDP. This means other processes always will only see a constant value defined by the kernel in their FP state. I took some pain to make sure to chose a variable that's already in L1 during context switch to make the overhead of this low. Also alternative() is used to patch away the new code on CPUs who don't need it. Patch for both i386/x86-64. The problem was discovered originally by Jan Beulich. Richard Brunner provided the basic code for the workarounds, with contribution from Jan. This is CVE-2006-1056 Cc: richard.brunner@amd.com Cc: jbeulich@novell.com Signed-off-by:
-
Ingo Molnar authored
- fix mddev_lock() usage bugs in md_attr_show() and md_attr_store(). [they did not anticipate the possibility of getting a signal] - remove mddev_lock_uninterruptible() [unused] Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Adrian Bunk authored
We don't have to #if guard prototypes. This also fixes a bug observed by Randy Dunlap due to a misspelled option in the #if. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
There was a report of a regression in the ALSA driver for the same hardware. Signed-off-by:
-
Adrian Bunk authored
Update the schedule for the removal of drivers depending on OBSOLETE_OSS_DRIVER as follows: - adjust OBSOLETE_OSS_DRIVER dependencie - from the release of 2.6.16 till the release of 2.6.17: approx. two months for users to report problems with the ALSA drivers for the same hardware - after the release of 2.6.17 (and before 2.6.18): remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without known regressions in the ALSA drivers for the same hardware Additionally, correct some OBSOLETE_OSS_DRIVER dependencies. A rationale of the changes is in http://lkml.org/lkml/2006/1/28/135Signed-off-by:
-
Arnaud MAZIN authored
Add a test to detect the ICH7 based Core Duo SONY laptops (such as the SZ1) as type3 models. Signed-off-by: Arnaud MAZIN < arnaud.mazin@gmail.com> Acked-by:
Stelian Pop <stelian@poppies.net> Signed-off-by:
-
Jon Masters authored
This fixes a hang in mpu401_uart.c that can occur when the mpu401 interface is non-existent or otherwise doesn't respond to commands but we issue IO anyway. snd_mpu401_uart_cmd now returns an error code that is passed up the stack so that an open() will fail immediately in such cases. Eventually discovered after wine/cxoffice would constantly cause hard lockups on my desktop immediately after loading (emulating Windows too well). Turned out that I'd recently moved my sound cards around and using /dev/sequencer now talks to a sound card with a broken MPU. This second version changes -EFAULT to -EIO and frees open resources on error too. Test booted and seems to work ok. Signed-off-by:
Jon Masters <jcm@jonmasters.org> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jean Delvare authored
Fix for bug #6395: Fail to resume on Tecra M2 with ADM1032 and Intel 82801DBM The BIOS of the Tecra M2 doesn't like it when it has to reboot or resume after the i2c-i801 driver has left the SMBus in PEC mode. The most simple fix is to clear the PEC bit after after every transaction. That's what this driver was doing up to 2.6.15 (inclusive). Thanks to Daniele Gaffuri for the very good report. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Johannes Goecke authored
On the MSI-K8T-NEO2 FIR ( Athlon-64, Socket 939 with VIA-K8T800- Chipset and onboard Sound,... ) the BIOS lets you choose "DISABLED" or "AUTO" for the On-Board Sound Device. If you add another PCI-Sound-Card the BIOS disables the on-board device. So far I have a Quirk, that does set the correspondent BIT in the PCI-registers to enable the soundcard. But how to ensure that the code is executed ONLY on excactly this kind of boards (not any other with similar Chipset)? Cc: Jaroslav Kysela <perex@suse.cz> Acked-by:
-
Chris Zankel authored
Remove the dependence on the async_icount structure in the TIOCGICOUNT macro for Xtensa. (Thanks Russell and Adrian for pointing this out) Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
-
Thayumanavar Sachithanantham authored
[PATCH] cs5535_gpio.c: call cdev_del() during module_exit to unmap kobject references and other cleanups During module unloading, cdev_del() must be called to unmap cdev related kobject references and other cleanups(such as inode->i_cdev being set to NULL) which prevents the OOPS upon subsequent loading, usage and unloading of modules(as seen in the mail thread http://marc.theaimsgroup.com/?l=linux-kernel&m=114533640609018&w=2). Also, remove unneeded test of gpio_base. Signed-off-by:
Thayumanavar Sachithanantham <thayumk@gmail.com> Signed-off-by:
-
Darren Jenkins authored
WARNING: drivers/video/pm2fb.o - Section mismatch: reference to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd5d) WARNING: drivers/video/pm2fb.o - Section mismatch: reference to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd82) They are caused because pm2fb_set_par() uses lowhsync and lowvsync which are marked __devinitdata. Signed-off-by:
Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by:
-
Christoph Lameter authored
gather_stats() is called with a spinlock held from check_pte_range. We cannot reschedule with a lock held. Signed-off-by:
-
Corey Minyard authored
Add myself as the IPMI maintainer. Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
