- 15 Sep, 2017 40 commits
-
-
Oscar Campos authored
commit deaba636 upstream. Add quirks for several corsair gaming devices to avoid long delays on report initialization Supported devices: - Corsair K65RGB Rapidfire Gaming Keyboard - Corsair K70RGB Rapidfire Gaming Keyboard - Corsair Scimitar Pro RGB Gaming Mouse Signed-off-by:
Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Colin Ian King authored
commit ed9ab428 upstream. Quirking the following AMI USB device with ALWAYS_POLL fixes an AMI virtual keyboard and mouse from not responding and timing out when it is attached to a ppc64el Power 8 system and when we have some rapid open/closes on the mouse device. usb 1-3: new high-speed USB device number 2 using xhci_hcd usb 1-3: New USB device found, idVendor=046b, idProduct=ff01 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Virtual Hub usb 1-3: Manufacturer: American Megatrends Inc. usb 1-3: SerialNumber: serial usb 1-3.3: new high-speed USB device number 3 using xhci_hcd usb 1-3.3: New USB device found, idVendor=046b, idProduct=ff31 usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.3: Product: Virtual HardDisk Device usb 1-3.3: Manufacturer: American Megatrends Inc. usb 1-3.4: new low-speed USB device number 4 using xhci_hcd usb 1-3.4: New USB device found, idVendor=046b, idProduct=ff10 usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.4: Product: Virtual Keyboard and Mouse usb 1-3.4: Manufacturer: American Megatrends Inc. With the quirk I have not been able to trigger the issue with half an hour of saturation soak testing. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Marcel Hasler authored
commit 8aa2cc7e upstream. The DolphinBar by Mayflash (identified as Dragonrise) needs HID_QUIRK_MULTI_INPUT to split it up into four input devices. Without this quirk the adapter is falsely recognized as a tablet. See also bug 115841 (https://bugzilla.kernel.org/show_bug.cgi?id=115841). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Signed-off-by:
-
Alex Wood authored
commit f83f90cf upstream. The Futaba TOSD-5711BB VFD crashes when the initial HID report is requested, register the display in hid-ids and tell hid-quirks to not do the init. Signed-off-by:
Alex Wood <thetewood@gmail.com> Signed-off-by:
-
Daniel Keller authored
commit 2ae3986b upstream. Adding support for not JP versions of the Microsoft Surface 4 Type Cover Pro [jkosina@suse.cz: The identical patch has been sent by Jeff Farthing, so I am including his signoff as well] Signed-off-by:
Jeff Farthing <jeff@jfarthing.com> Signed-off-by:
Daniel Keller <daniel.keller@gcd.de> Signed-off-by:
-
Marcel Hasler authored
commit b2554000 upstream. All known gamepad adapters by Mayflash (identified as Dragonrise) need HID_QUIRK_MULTI_INPUT to split them up into four input devices. Without this quirk those adapters are falsely recognized as tablets. Fixes bug 115841 (https://bugzilla.kernel.org/show_bug.cgi?id=115841). Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Steinar H. Gunderson authored
commit 4973ca9a upstream. The Akai MIDImix (09e8:0031) is a MIDI fader controller that speaks regular MIDI and works well with Linux. However, initialization gets delayed due to reports timeout: [3643645.631124] hid-generic 0003:09E8:0031.0020: timeout initializing reports [3643645.632416] hid-generic 0003:09E8:0031.0020: hiddev0: USB HID v1.11 Device [AKAI MIDI Mix] on usb-0000:00:14.0-2/input0 Adding "usbhid.quirks=0x09e8:0x0031:0x20000000" on the kernel command line makes the issues go away. Signed-off-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by:
-
Marian Krivoš authored
commit 3da30bfc upstream. Add quirk for Corsair STRAFE keyboard, similarly to what we've been doing for other CORSAIR devices already, in order to avoid long delays during boot. [jkosina@suse.cz: reword changelog a little bit] Signed-off-by:
Marian Krivos <marian.krivos@gmail.com> Signed-off-by:
-
Yuta Kobayashi authored
commit b490a853 upstream. Adding support for the Microsoft Surface 4 Type Cover Pro (JP). Signed-off-by:
Yuta Kobayashi <alu.ula@outlook.com> Signed-off-by:
-
Trent Lloyd authored
commit 282bf1fe upstream. These devices feature multiple interfaces/endpoints: a legacy BIOS/boot interface (endpoint 0x81), as well as 2 corsair-specific keyboard interfaces (endpoint 0x82, 0x83 IN/0x03 OUT) and an RGB LED control interface (endpoint 0x84 IN/0x04 OUT) Because the extra 3 interfaces are not of subclass USB_INTERFACE_SUBCLASS_BOOT, HID_QUIRK_NOGET is not automatically set on them and a 10s timeout per-endpoint (30s per device) occurs initialising reports on boot. We configure HID_QUIRK_NO_INIT_REPORTS for these devices. Additionally the left-side G1-G18 macro keys on the K95RGB generate output on the un-opened 0x82/0x83 endpoints which causes the keyboard to stop responding waiting for this event to be collected. We enable HID_QUIRK_ALWAYS_POLL to prevent this situation from occurring. Signed-off-by:
Trent Lloyd <trent@lloyd.id.au> Tested-by:
SUGNIAUX Wilfried <wsu@ppharm2k20.net> Signed-off-by:
-
Nazar Mokrynskyi authored
commit 567a44ec upstream. Needed for v2 of the device firmware, otherwise kernel will stuck for few seconds and throw "usb_submit_urb(ctrl) failed: -1" early on system boot. Signed-off-by:
Nazar Mokrynskyi <nazar@mokrynskyi.com> Reviewed-by:
-
Daniel Bristot de Oliveira authored
commit c14022bf upstream. The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0027 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. It can also cause the hang the system. This patch adds the quirk for this device, which causes the delay to disappear. It is named as "USB Keykoard2" because the "USB Keykoard" already exists. Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Stafford Horne authored
commit a382c30c upstream. The midi controller times-out while initializing reports, this causes boot to take an extra 10 seconds. The device descriptor advertises that it has an internal HID device but seems to not actually do anything useful. Signed-off-by:
Stafford Horne <shorne@gmail.com> Reviewed-by:
-
Benjamin Tissoires authored
commit 962b7a0e upstream. dmesg shows a lot of: [ 1374.890348] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916388] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916432] hid-multitouch 0003:0408:3003.0007: timeout initializing reports Add the quirk and make the touchscreen happy. Signed-off-by:
Jim lovell <jimlovell777@gmail.com> Signed-off-by:
-
Adrien Vergé authored
commit 33bd2dd0 upstream. All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use this quirk for all devices from this vendor, rather than maintaining a list of all its known product IDs. Tested-by:
Adrien Vergé <adrienverge@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jimmy Berry authored
commit 0d51571d upstream. Without quirk keyboard repeats '6' until volume control is used since it indicates the key is pressed without ever releasing. Signed-off-by:
Jimmy Berry <jimmy@boombatower.com> Signed-off-by:
-
Oliver Schmitt authored
commit b6ad9a26 upstream. The WiiU adapter from Mayflash (see http://www.mayflash.com/Products/NINTENDOWiiU/W009.html) is not working correctly. The "XInput" mode works fine, the controller is recognized as a xbox controller. But it is only possible to connect one controller with this method. In "DInput" mode the device is recognized as some kind of mouse input but no joystick is created. This commit will change this behavior with HID_QUIRK_MULTI_INPUT to split the device into 4 input devices so that it will also create joysticks in /dev/input/js*. Signed-off-by:
Oliver Schmitt <voltumna@gmx.net> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Donavan Lance authored
commit c6956eb7 upstream. Adds support for Microsoft Type Cover 3 with 0x07e2 product ID. Signed-off-by:
Donavan Lance <shvr@fedoraproject.org> Signed-off-by:
-
Benjamin Tissoires authored
commit c9b57724 upstream. Looks like 0x8882 needs the same quirk than 0x8883. Given that both devices claim they are "TPV OpticalTouchScreen" rename the 0x8883 to add its PID in the #define. Reported-by:
Blaine Lee <blaine.j.lee@medtronic.com> Signed-off-by:
-
Stephen Just authored
commit 0439de75 upstream. Adding support for the Microsoft Surface 3 (non-pro) Type Cover. The existing definitions and quirks are actually for the Surface Pro 3 type covers. I've renamed the old constants to reflect that they belong to the Surface Pro 3, and added a new constant and matching code for the Surface 3. Signed-off-by:
Stephen Just <stephenjust@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Reyad Attiyat authored
commit c5b2b809 upstream. The newer firmware on MS Surface 2 tablets causes the type and touch cover keyboards to timeout when waiting for reports. The quirk HID_QUIRK_NO_INIT_REPORTS allows them to function normally. Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
-
Raimund Roth authored
commit 18eec2cd upstream. Adding support for the Microsoft Surface Pro Power Cover. Signed-off-by:
Raimund Roth <raimundmroth@gmail.gom> Signed-off-by:
-
Sean Young authored
commit 6e5e9a06 upstream. This device supports force feedback and has two ports. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Raphael Assenat authored
commit d6ea2f88 upstream. The raphnet.net 4nes4snes and 2nes2snes multi-joystick adapters use a single HID report descriptor with one report ID per controller. This has the effect that the inputs of otherwise independent game controllers get packed in one large joystick device. With this patch each controller gets its own /dev/input/jsX device, which is more natural and less confusing than having all inputs going to the same place. Signed-off-by:
Raphael Assenat <raph@raphnet.net> Signed-off-by:
-
Oliver Neukum authored
commit 43faadfe upstream. The device exists with two device IDs instead of one as previously believed. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit 003e817a upstream. During a stress test these mice kept dropping and reappearing in runlevel 1 as opposed to 5. Signed-off-by:
-
Benjamin Tissoires authored
commit 70b69cfb upstream. Based on a patch from: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Most of the tablets handled by hid-uclogic already use MULTI_INPUT. For the ones which are not quirked in usbhid/hidquirks, they have a custom report descriptor which contains only one report per HID interface. For those tablets HID_QUIRK_MULTI_INPUT is transparent. According to https://github.com/DIGImend/tablets, the only problematic tablet currently handled by hid-uclogic is the TWHA60 v3. This tablet presents different report descriptors from the ones currently quirked. This is not a problem per se, given that this tablet is not supported currently in this version (it needs the same command as a Huion to start forwarding events). Reviewed-by:
Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by:
-
Milan Plzik authored
commit feb6faf1 upstream. Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by default. This patch replaces it with a corrected one. Signed-off-by:
Milan Plzik <milan.plzik@gmail.com> Reviewed-by:
-
Wangzhao Cai authored
commit 30c6fd42 upstream. I am using a USB keyborad that give me "usb_submit_urb(ctrl) failed: -1" error when I plugin it. and I need to wait for 10s for this device to be ready. By adding this quirks, the usb keyborad is usable right after plugin Signed-off-by:
Wangzhao Cai <microcaicai@gmail.com> Signed-off-by:
-
Paolo Bonzini authored
commit bbaf0e2b upstream. native_safe_halt enables interrupts, and you just shouldn't call rcu_irq_enter() with interrupts enabled. Reorder the call with the following local_irq_disable() to respect the invariant. Reported-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit ba4a648f upstream. In commit 8c272261 ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation of cpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU. Unfortunately we neglected to notice that we use cpu_to_node() in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas, cpu_to_node() reports that all CPUs are on node 0, so we allocate all percpu areas on node 0. This is visible in the dmesg output, as all pcpu allocs being in group 0: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31 pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39 pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47 To fix it we need an early_cpu_to_node() which can run prior to percpu being setup. We already have the numa_cpu_lookup_table we can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31 pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39 pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47 We can also check the data_offset in the paca of various CPUs, with the fix we see: CPU 0: data_offset = 0x0ffe8b0000 CPU 24: data_offset = 0x1ffe5b0000 And we can see from dmesg that CPU 24 has an allocation on node 1: node 0: [mem 0x0000000000000000-0x0000000fffffffff] node 1: [mem 0x0000001000000000-0x0000001fffffffff] Fixes: 8c272261 ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
commit 5ebb6dd3 upstream. We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0a ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Robert Jarzmik authored
commit cbf52a3e upstream. When the kernel is compiled with an "O=" argument, the object files are not in the source tree, but in the build tree. This patch fixes O= build by looking for object files in the build tree. Fixes: 923e02ec ("scripts/tags.sh: Support compiled source") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Eric Dumazet authored
commit 77d4b1d3 upstream. Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Tested-By:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David S. Miller authored
commit e3e86b51 upstream. If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Reported-by:
-
Richard Narron authored
commit 239e250e upstream. This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by:
Richard Narron <comet.berkeley@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will B <will.brokenbourgh2877@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sean Young authored
commit 963761a0 upstream. A rc device can call ir_raw_event_handle() after rc_allocate_device(), but before rc_register_device() has completed. This is racey because rcdev->raw is set before rcdev->raw->thread has a valid value. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit ff86bf0c upstream. The alarmtimer code has another source of potentially rearming itself too fast. Interval timers with a very samll interval have a similar CPU hog effect as the previously fixed overflow issue. The reason is that alarmtimers do not implement the normal protection against this kind of problem which the other posix timer use: timer expires -> queue signal -> deliver signal -> rearm timer This scheme brings the rearming under scheduler control and prevents permanently firing timers which hog the CPU. Bringing this scheme to the alarm timer code is a major overhaul because it lacks all the necessary mechanisms completely. So for a quick fix limit the interval to one jiffie. This is not problematic in practice as alarmtimers are usually backed by an RTC for suspend which have 1 second resolution. It could be therefor argued that the resolution of this clock should be set to 1 second in general, but that's outside the scope of this fix. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kostya Serebryany <kcc@google.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de [bwh: Backported to 3.16: - Use ktime_to_ns()/ktime_set() as ktime_t is not scalar - Adjust context] Signed-off-by:
-
Thomas Gleixner authored
commit f4781e76 upstream. Andrey reported a alartimer related RCU stall while fuzzing the kernel with syzkaller. The reason for this is an overflow in ktime_add() which brings the resulting time into negative space and causes immediate expiry of the timer. The following rearm with a small interval does not bring the timer back into positive space due to the same issue. This results in a permanent firing alarmtimer which hogs the CPU. Use ktime_add_safe() instead which detects the overflow and clamps the result to KTIME_SEC_MAX. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Julius Werner authored
commit 32829da5 upstream. A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow. Fixes: b299cde2 ("drivers: char: mem: Check for address space wraparound with mmap()") Reported-by:
Nico Huber <nico.h@gmx.de> Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
-
