* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Fix typo in status comparison causing warning

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: Have streamline_config process menuconfigs too
  kconfig: Fix streamline_config to read multi line deps in Kconfig files
  kconfig: Fix missing declaration of variable $dir in streamline_config.pl
  kconfig: Fix variable name typo %prompts in streamline_config.pl
  kconfig: Make localmodconfig handle environment variables

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd
  mac80211: fix failure to check kmalloc return value in key_key_read
  libertas: Fix sd8686 firmware reload
  ath9k: Fix incorrect access of rate flags in RC
  netfilter: xt_socket: Make tproto signed in socket_mt6_v1().
  stmmac: enable/disable rx/tx in the core with a single write.
  net: atarilance - flags should be unsigned long
  netxen: fix kdump
  pktgen: Limit how much data we copy onto the stack.
  net: Limit socket I/O iovec total length to INT_MAX.
  USB: gadget: fix ethernet gadget crash in gether_setup
  fib: Fix fib zone and its hash leak on namespace stop
  cxgb3: Fix panic in free_tx_desc()
  cxgb3: fix crash due to manipulating queues before registration
  8390: Don't oops on starting dev queue
  dccp ccid-2: Stop polling
  dccp: Refine the wait-for-ccid mechanism
  dccp: Extend CCID packet dequeueing interface
  dccp: Return-value convention of hc_tx_send_packet()
  igbvf: fix panic on load
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: dream: remove dream driver and arch from tree

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options
  ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter
  ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig()
  ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig()
  eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
  ecryptfs: call vfs_setxattr() in ecryptfs_setxattr()

Product codenames are OK, but once an actual product name is available,
it should be referenced as well.

  http://ark.intel.com/chipset.aspx?familyID=52499Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This code is stalled, with no one working on it anymore, and the main
msm code is now going through the proper channels to get merged
correctly.

So remove it as it contains a number of kernel information leaks and it
is doubtful if it even still builds anymore.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Bryan Huntsman <bryanh@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Individual register get/set for ppc
  kgdbts: prevent re-entry to kgdbts before it unregisters
  debug_core,x86,blackfin: Clean up hw debug disable API
  kdb: Fix early debugging crash regression
  kgdb,arm: fix register dump
  kdb: fix per_cpu command to remove supress mask
  kdb: Add kdb kernel module sample

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc-agp: fix missing slab.h include

On module removal, the sdio version of b43 generates the following warning:

[  851.560519] ------------[ cut here ]------------
[  851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90()
[  851.560534] Hardware name: 20552PG
[  851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output
[  851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1
[  851.560622] Call Trace:
[  851.560631]  [<c014a102>] warn_slowpath_common+0x72/0xa0
[  851.560636]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[  851.560641]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[  851.560645]  [<c014a152>] warn_slowpath_null+0x22/0x30
[  851.560649]  [<c04d94c8>] mmc_wait_for_cmd+0x88/0x90
[  851.560655]  [<c0401585>] ? device_release+0x25/0x80
[  851.560660]  [<c04df210>] mmc_io_rw_direct_host+0xa0/0x150
[  851.560665]  [<c04df370>] mmc_io_rw_direct+0x30/0x40
[  851.560669]  [<c04e06e7>] sdio_disable_func+0x37/0xa0
[  851.560683]  [<f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43]
[  851.560687]  [<c04df8cc>] sdio_bus_remove+0x1c/0x60
[  851.560692]  [<c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30
[  851.560697]  [<c0404991>] __device_release_driver+0x51/0xb0
[  851.560701]  [<c0404a7f>] driver_detach+0x8f/0xa0
[  851.560705]  [<c0403c83>] bus_remove_driver+0x63/0xa0
[  851.560709]  [<c0405039>] driver_unregister+0x49/0x80
[  851.560713]  [<c0405039>] ? driver_unregister+0x49/0x80
[  851.560718]  [<c04dfad7>] sdio_unregister_driver+0x17/0x20
[  851.560727]  [<f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43]
[  851.560734]  [<f8dfe76f>] b43_exit+0x17/0x3c [b43]
[  851.560740]  [<c017fb8d>] sys_delete_module+0x13d/0x200
[  851.560747]  [<c01fd7d2>] ? do_munmap+0x212/0x300
[  851.560752]  [<c010311f>] sysenter_do_call+0x12/0x28
[  851.560757] ---[ end trace 31e14488072d2f7d ]---
[  851.560759] ------------[ cut here ]------------

The warning is caused by b43 not claiming the device before calling
sdio_disable_func().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Arnd Hannemann <arnd@arndnet.de>
Tested-by: Arnd Hannemann <arnd@arndnet.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

I noticed two small issues in mac80211/debugfs_key.c::key_key_read while
reading through the code. Patch below.

The key_key_read() function returns ssize_t and the value that's actually
returned is the return value of simple_read_from_buffer() which also
returns ssize_t, so let's hold the return value in a ssize_t local
variable rather than a int one.

Also, memory is allocated dynamically with kmalloc() which can fail, but
the return value of kmalloc() is not checked, so we may end up operating
on a null pointer further on. So check for a NULL return and bail out with
-ENOMEM in that case.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

For the SD8686, we cannot rely on the scratch register to read the firmware
load status, because the same register is used for storing RX packet length.
Broaden the check to account for this.

The module can now be unloaded/reloaded successfully.

Based on the implementation from libertas_tf.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The index variable to access the rate flags should be obtained from the
inner loop counter which corresponds to the rate table structure.This
fixes the invalid rate selection i.e when the supported basic rate is
invalid on a particular band and also the following warning message.
Thanks to Raj for finding this out.

Call Trace:

 [<ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0

 [<ffffffff8104ee95>] warn_slowpath_null+0x15/0x20

 [<ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k]

 [<ffffffff811a0636>] ? cpumask_next_and+0x36/0x50

 [<ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211]

 [<ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211]

 [<ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211]

 [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0

 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]

 [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]

 [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]

 [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]

 [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0

 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]

 [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]

 [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]

 [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]

 [<ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211]

 [<ffffffff8133a375>] ? schedule+0x2f5/0x8e0

 [<ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211]

 [<ffffffff81064fcf>] process_one_work+0x10f/0x380

 [<ffffffff81066bc2>] worker_thread+0x162/0x340

 [<ffffffff81066a60>] ? worker_thread+0x0/0x340

Cc: stable@kernel.org
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit 534af108(kgdb,kdb: individual
register set and and get API) introduce dbg_get_reg/dbg_set_reg API
for individual register get and set.

This patch implement those APIs for ppc.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The "kgdb_connected" variable of debug_core just indicates whether or
not kgdbts is connected to the debug_core.  It does not completely
prevent a script from trying invoke kgdbts again and possibly crashing
the system (see Call Trace below).

The configured variable in kgtbts can be used instead of
kgdb_connected instead of kgdb_connected. The cleanup_kgdbts() can
also be removed because there is no possible way to build kgdbts as a
kernel module that you could unload with rmmod.

Call Trace:
-----------------------------------------------------------------
root:/$ echo kgdbts=V1S1000 > /sys/module/kgdbts/parameters/kgdbts
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
------------[ cut here ]------------
WARNING: at kernel/debug/debug_core.c:1002
kgdb_unregister_io_module+0xec/0x100()
Hardware name: Moon Creek platform
Modules linked in:
Pid: 664, comm: sh Not tainted 2.6.34.1-WR4.0.0.0_standard #58
Call Trace:
 [<c103b1ed>] warn_slowpath_common+0x6d/0xa0
 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100
 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100
 [<c10544e0>] ? param_attr_store+0x0/0x20
 [<c103b235>] warn_slowpath_null+0x15/0x20
 [<c1079fdc>] kgdb_unregister_io_module+0xec/0x100
 [<c124e4ea>] cleanup_kgdbts+0x1a/0x20
 [<c124eced>] param_set_kgdbts_var+0x6d/0xb0
 [<c124ec80>] ? param_set_kgdbts_var+0x0/0xb0
 [<c10544f7>] param_attr_store+0x17/0x20
 [<c105457c>] module_attr_store+0x2c/0x40
 [<c111fe84>] sysfs_write_file+0x94/0xf0
 [<c10d42f6>] vfs_write+0x96/0x130
 [<c111fdf0>] ? sysfs_write_file+0x0/0xf0
 [<c10d44d6>] sys_write+0x46/0xd0
 [<c13bf329>] system_call_done+0x0/0x4
---[ end trace 4eb028c6ee43154c ]---
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
-----------------------------------------------------------------

[jason.wessel@windriver.com: remove cleanup_kgdbts() ]
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.

This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The kdb_current legally be equal to NULL in the early boot of the x86
arch.  The problem pcan be observed by booting with the kernel arguments:

    earlyprintk=vga ekgdboc=kbd kgdbwait

The kdb shell will oops on entry and recursively fault because it
cannot get past the final stage of shell initialization.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs
array rather than the number of registers, leading to an oops when the
"rd" command is used in KDB.

Cc: stable@kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Rusty pointed out that the per_cpu command uses up lots of space on
the stack and the cpu supress mask is probably not needed.

This patch removes the need for the supress mask as well as fixing up
the following problems with the kdb per_cpu command:
  * The per_cpu command should allow an address as an argument
  * When you have more data than can be displayed on one screen allow
    the user to break out of the print loop.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Add an example of how to add a dynamic kdb shell command via a kernel
module.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits)
  ftrace/MIPS: Enable C Version of recordmcount
  ftrace/MIPS: Add module support for C version of recordmcount
  ftrace/MIPS: Add MIPS64 support for C version of recordmcount
  MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
  MIPS: Allow UserLocal on MIPS_R1 processors
  MIPS: Honor L2 bypass bit
  MIPS: Add BMIPS CP0 register definitions
  MIPS: Add BMIPS processor types to Kconfig
  MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
  MIPS: Add support for hardware performance events (mipsxx)
  MIPS: Perf-events: Add callchain support
  MIPS: add support for hardware performance events (skeleton)
  MIPS: add support for software performance events
  MIPS: define local_xchg from xchg_local to atomic_long_xchg
  MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
  MIPS: AR7: Initialize GPIO earlier
  MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
  USB: Add EHCI and OHCH glue for OCTEON II SOCs.
  MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
  MIPS: Octeon: Apply CN63XXP1 errata workarounds.
  ...

Selects HAVE_C_RECORDMCOUNT to use the C version of the recordmcount
intead of the old Perl Version of recordmcount.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <bb99009a9ac79d3f55a8c8bf1c8bd2bc0e1f160e.1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Since MIPS modules' address space differs from the core kernel space, to access
the _mcount in the core kernel, the kernel functions in modules must use long
call (-mlong-calls): load the _mcount address into one register and jump to the
address stored by the register:

 c:  3c030000        lui     v1,0x0  <-------->  b label
           c: R_MIPS_HI16  _mcount
           c: R_MIPS_NONE  *ABS*
           c: R_MIPS_NONE  *ABS*
10:  64630000        daddiu  v1,v1,0
          10: R_MIPS_LO16 _mcount
          10: R_MIPS_NONE *ABS*
          10: R_MIPS_NONE *ABS*
14:	03e0082d 	move	at,ra
18:	0060f809 	jalr	v1
label:

In the old Perl version of recordmcount, we only need to record the position of
the 1st R_MIPS_HI16 type of _mcount, and later, in ftrace_make_nop(), replace
the instruction in this position by a "b label" and in ftrace_make_call(),
replace it back.

But, the default C version of recordmcount records all of the _mcount symbols,
so, we must filter the 2nd _mcount like the Perl version of recordmcount does.

The C version of recordmcount copes with the symbols before they are linked, So
It doesn't know the type of the symbols and therefore can not filter the
symbols as the Perl version of recordmcount does. But as we can see above, the
2nd _mcount symbols of the long call alawys follows the 1st _mcount symbol of
the same long call, which means the offset from the 1st to the 2nd is fixed, it
is 0x10-0xc = 4 here, 4 is the length of the 1st load instruciton, for MIPS has
fixed length of instructions, this offset is always 4.

And as we know, the _mcount is inserted into the entry of every kernel
function, the offset between the other _mcount's is expected to be always
bigger than 4. So, to filter the 2ns _mcount symbol of the long call, we can
simply check the offset between two _mcount symbols, If it is 4, then, filter
the 2nd _mcount symbol.

To avoid touching too much code, an 'empty' function fn_is_fake_mcount() is
added for all of the archs, and the specific archs can override it via chaning
the function pointer: is_fake_mcount in do_file() with the e_machine. e.g. This
patch adds MIPS_is_fake_mcount() to override the default fn_is_fake_mcount()
pointed by is_fake_mcount.

This fn_is_fake_mcount() checks if the _mcount symbol is fake, e.g. the 2nd
_mcount symbol of the long call is fake, for there are 2 _mcount symbols mapped
to one real mcount call, so, one of them is fake and must be filtered.

This fn_is_fake_mcount() is called in sift_rel_mcount() after finding the
_mcount symbols and before adding the _mcount symbol into mrelp, so, it can
prevent the fake mcount symbol going into the last __mcount_loc table.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <b866f0138224340a132d31861fa3f9300dee30ac.1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS64 has 'weird' Elf64_Rel.r_info[1,2], which must be used instead of
the generic Elf64_Rel.r_info, otherwise, the C version of recordmcount
will not work for "segmentation fault".

Usage of "union mips_r_info" and the functions MIPS64_r_sym() and
MIPS64_r_info() written by Maciej W. Rozycki <macro@linux-mips.org>

----
[1] http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf
[2] arch/mips/include/asm/module.h
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: John Reiser <jreiser@BitWagon.com>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
LKML-Reference: <AANLkTinwXjLAYACUfhLYaocHD_vBbiErLN3NjwN8JqSy@mail.gmail.com>
LKML-Reference: <910dc2d5ae1ed042df4f96815fe4a433078d1c2a.1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The TASK_SIZE macro should reflect the size of a user process virtual
address space.  Previously for 64-bit kernels, this was not the case.
The immediate cause of pain was in
hugetlbfs/inode.c:hugetlb_get_unmapped_area() where 32-bit processes
trying to mmap a huge page would be served a page with an address
outside of the 32-bit address range.  But there are other uses of
TASK_SIZE in the kernel as well that would like an accurate value.

The new definition is nice because it now makes TASK_SIZE and
TASK_SIZE_OF() yield the same value for any given process.

For 32-bit kernels there should be no change, although I did factor
out some code in asm/processor.h that became identical for the 32-bit and
64-bit cases.

__UA_LIMIT is now set to ~((1 << SEGBITS) - 1) for 64-bit kernels.
This should eliminate the possibility of getting a
AddressErrorException in the kernel for addresses that pass the
access_ok() test.

With the patch applied, I can still run o32, n32 and n64 processes,
and have an o32 shell fork/exec both n32 and n64 processes.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1701/

Some MIPS32R1 processors implement UserLocal (RDHWR $29) to accelerate
programs that make extensive use of thread-local storage.  Therefore,
setting up the HWRENA register should not depend on cpu_has_mips_r2.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org

On many of the newer MIPS32 cores, CP0 CONFIG2 bit 12 (L2B) indicates
that the L2 cache is disabled and therefore Linux should not attempt
to use it.

[Ralf: Moved the code added by Kevin's original patch into a separate
function that can easily be replaced for platforms that need more a
different probe.]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org>
Cc: <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/1723/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1708/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org

[v2: add "VIPER" marketing name for BMIPS4350]

Add processor feature definitions for BMIPS3300, BMIPS4350, BMIPS4380,
and BMIPS5000.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1716/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org

BMIPS processor cores are used in 50+ different chipsets spread across
5+ product lines.  In many cases the chipsets do not share the same
peripheral register layouts, the same register blocks, the same
interrupt controllers, the same memory maps, or much of anything else.

But, across radically different SoCs that share nothing more than the
same BMIPS CPU, a few things are still mostly constant:

SMP operations
Access to performance counters
DMA cache coherency quirks
Cache and memory bus configuration

So, it makes sense to treat each BMIPS processor type as a generic
"building block," rather than tying it to a specific SoC.  This makes it
easier to support a large number of BMIPS-based chipsets without
unnecessary duplication of code, and provides the infrastructure needed
to support BMIPS-proprietary features.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org

This patch adds the mipsxx Perf-events support based on the skeleton.
Generic hardware events and cache events are now fully implemented for
the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as
R10000/SB1), the generic hardware event tables and cache event tables
need to be filled out. To support other CPUs which have different PMU
than mipsxx, such as RM9000 and LOONGSON2, the additional files
perf_event_$cpu.c need to be created.

Raw event is an important part of Perf-events. It helps the user collect
performance data for events that are not listed as the generic hardware
events and cache events but ARE supported by the CPU's PMU.

This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to
use it, please refer to processor core software user's manual and the
comments for mipsxx_pmu_map_raw_event() for more details.

Please note that this is a "precise" implementation, which means the
kernel will check whether the requested raw events are supported by this
CPU and which hardware counters can be assigned for them.

To test the functionality of Perf-event, you may want to compile the tool
"perf" for your MIPS platform. You can refer to the following URL:
http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html

You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile
for your libs, includes, etc.

In case you encounter the boot failure in SMVP kernel on multi-threading
CPUs, you may take a look at:
http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1689/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/kernel/perf_event_mipsxx.c

Adds callchain support for MIPS Perf-events. For more info on this feature,
please refer to tools/perf/Documentation/perf-report.txt and
tools/perf/design.txt.

Currently userspace callchain data is not recorded, because we do not have
a safe way to do this.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1690/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch provides the skeleton of the HW perf event support. To enable
this feature, we can not choose the SMTC kernel; Oprofile should be
disabled; kernel performance events be selected. Then we can enable it in
Kernel type menu.

Oprofile for MIPS platforms initializes irq at arch init time. Currently
we do not change this logic to allow PMU reservation.

If a platform has EIC, we can use the irq base and perf counter irq offset
defines for the interrupt controller in specific init_hw_perf_events().

Based on this skeleton patch, the 3 different kinds of MIPS PMU, namely,
mipsxx/loongson2/rm9000, can be supported by adding corresponding lower
level C files at the bottom. The suggested names of these files are
perf_event_mipsxx.c/perf_event_loongson2.c/perf_event_rm9000.c. So, for
example, we can do this by adding "#include perf_event_mipsxx.c" at the
bottom of perf_event.c.

In addition, PMUs with 64bit counters are also considered in this patch.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1688/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Software events are required as part of the measurable stuff by the
Linux performance counter subsystem. Here is the list of events added by
this patch:
PERF_COUNT_SW_PAGE_FAULTS
PERF_COUNT_SW_PAGE_FAULTS_MIN
PERF_COUNT_SW_PAGE_FAULTS_MAJ
PERF_COUNT_SW_ALIGNMENT_FAULTS
PERF_COUNT_SW_EMULATION_FAULTS
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Acked-by: David Daney <ddaney@caviumnetworks.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Patchwork: https://patchwork.linux-mips.org/patch/1686/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Perf-events is now using local_t helper functions internally. There is a
use of local_xchg(). On MIPS, this is defined to xchg_local() which is
missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h
to atomic_long_xchg(). Then Perf-events can pass the build.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1687/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost
completely identical to AR7 except on a few points:
- a second bank of gpios is available
- vlynq0 on titan is vlynq1 on ar7
- different PHY addresses for cpmac0

This SoC can be found on commercial products like the Linksys WRTP54G

Original patch by Xin with improvments by Florian.
Signed-off-by: Xin Zhen <xlonestar2000@aim.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1563/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---

In order to detect the Titan variant, we must initialize GPIOs earlier since
detection relies on some GPIO values to be set.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1562/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---

Declare that OCTEON reference boards have both OHCI and EHCI.

Add platform devices for the corresponding hardware.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1676/Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The OCTEON II SOC has USB EHCI and OHCI controllers connected directly
to the internal I/O bus.  This patch adds the necessary 'glue' logic
to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II.

The OCTEON normally runs big-endian, and the ehci/ohci internal
registers have host endianness, so we need to select
USB_EHCI_BIG_ENDIAN_MMIO.

The ehci and ohci blocks share a common clocking and PHY
infrastructure.  Initialization of the host controller and PHY clocks
is common between the two and is factored out into the
octeon2-common.c file.

Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in
arch/mips/Kconfig in a following patch.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1675/Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>