- 23 Jun, 2015 5 commits
-
-
Daniel Vetter authored
This validates the mst_primary under the lock, and then calls into the check and send function. This makes the code a lot easier to understand the locking rules in. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel into drm-next fix warning introduced in last -fixes * tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel: drm/i915: Silence compiler warning
-
Dave Airlie authored
This symbol came via exynos-next, but modular builds are broken so just fix it up now. Signed-off-by: -
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Summary: . Add atomic feature support - Exynos also now supports atomic feature. However, it doesn't guarantee atomic operation yet, and is required for more cleanups. This time we just modified for Exynos drm driver to use atomic interfaces instead of legacy ones. Next time, we will enhance Exynos drm driver to support the atomic operation. . Add iommu support - This is a patch series according to below Exynos iommu integration work with DT and dma-mapping subsystem, http://lwn.net/Articles/607626/ . Consolidate Exynos drm driver initialization. - This patch sereis resolves the issue that only the first compoments was bound when happened deferred probing for other pipelines and also makes the driver to be more cleanned up by moving the dispered codes for registering kms drivers to one place. . Add new MIC, DECON drivers, and MIPI-DSI support for Exynos5433. - Add MIC(Mobile image compressor) driver. MIC is a new IP for Exynos5433 and later, which is used to transfer frame data to MIPI-DSI controller compressing the data to reduce memory bandwidth. - Add DECON driver for Exynos5433 SoC. This IP is a dislay controller similar to Exynos7's one but this controller has much different registers from Exynos7's ones so this driver has been implemented separately. We will implement a helper modules for FIMD and two DECON controllers to remove duplicated codes later. - Add Exynos5433 SoC support to MIPI-DSI driver, and device tree relevant patches. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (50 commits) ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver drm/exynos: fix the input prompt of Exynos7 DECON drm/exynos: add drm_iommu_attach_device_if_possible() drm/exynos: Add the dependency for DRM_EXYNOS to DPI/DSI/DP drm/exynos: remove the dependency of DP driver for ARCH_EXYNOS drm/exynos: do not wait for vblank at atomic operation drm/exynos: Remove unused vma field of exynos_drm_gem_obj drm/exynos: fimd: fix page fault issue with iommu drm/exynos: iommu: improve a check for non-iommu dma_ops drm/exynos: iommu: detach from default dma-mapping domain on init ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
One more drm-misc pull for 4.2. The important one is the fix from Laurent for Daniel Stone's mode_blob work. * tag 'topic/drm-misc-2015-06-22' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Don't set crtc_state->enable manually drm: prime: Document gem_prime_mmap drm: Avoid the double clflush on the last cache line in drm_clflush_virt_range() drm/atomic: Extract needs_modeset function drm/cma: Fix 64-bit size_t build warnings Documentation/drm: Update rotation property
-
- 22 Jun, 2015 17 commits
-
-
Hyungwon Hwang authored
The clock which was named as 'pll_clk' is actually not the clock source of PLL in MIPI DSI. This patch fixes this disagreement. Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Acked-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Laurent Pinchart authored
The enable field needs to be kept in sync with the mode_blob field. Call drm_atomic_set_mode_prop_for_crtc() instead of setting enable to false in order to dereference the mode blob correctly. v2: - Check the return value of drm_atomic_set_mode_prop_for_crtc() - Drop the num_connectors local variable Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Hyungwon Hwang authored
On some board, TE GPIO should be configured properly thoughout pinctrl driver as an wakeup interrupt. So this gpio should be configurable in the board's DT, not being requested as a input pin. Signed-off-by:
-
Hyungwon Hwang authored
MIC must be initilized by MIPI DSI when it is being bound. Signed-off-by:
-
Hyungwon Hwang authored
This patch adds support for Exynos5433 mipi dsi. Signed-off-by:
-
Hyungwon Hwang authored
This patch make the driver to use an array for clock access. The number of clocks are different from the existing MIPI DSI driver and Exynos5433 MIPI DSI driver. So this patch is needed before adding support for Exynos5433 MIPI DSI driver. Signed-off-by:
-
Hyungwon Hwang authored
Exynos MIPI DSI driver uses some static values such as address offsets, register setting values, and etc. This patch makes the driver get those values from the driver data. Signed-off-by:
-
Hyungwon Hwang authored
This patch adds macros for register writing/reading. This is needed for adding support Exynos5433 MIPI DSI driver, not by using if statement, but by using driver data. Signed-off-by:
-
Hyungwon Hwang authored
This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk is actually not the pll input clock for dsi. The pll input clock comes from the board's oscillator directly. But for the backward compatibility, the old clock name "pll_clk" is also OK. Signed-off-by:
-
Hyungwon Hwang authored
MIC(Mobile image compressor) is newly added IP in Exynos5433. MIC resides between decon and mipi dsim, and compresses frame data by 50%. With dsi, not display port, to send frame data to the panel, the bandwidth is not enough. That is why this compressor is introduced. Signed-off-by:
-
Hyungwon Hwang authored
When there are multiple ports or multiple endpoints in a port, they have to be distinguished by the value of reg property. It is common. The drivers can get the specific endpoint in the specific port via this function. Now the drivers have to implement this code in themselves or have to force the order of dt nodes to get the right node. Signed-off-by:
Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Joonyoung Shim authored
DECON(Display and Enhancement Controller) is new IP replacing FIMD in Exynos5433. This patch adds Exynos5433 decon driver. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Hyungwon Hwang authored
This patch is a preparation patch for adding support for Exynos5433 DECON. Exynos7 DECON have to be distinguished from Exynos5433 DECON. Signed-off-by:
-
Hyungwon Hwang authored
Every CRTC drivers in Exynos DRM implements the code which checks whether IOMMU is supported or not, and if supported enable it. Making new helper for it generalize each CRTC drivers. Signed-off-by:
-
Hyungwon Hwang authored
Without this dependency, Kbuild is confused and the configs below them are not placed under Exynos DRM. This patch fixes it, so the configs below them become to be placed under Exynos DRM. Signed-off-by:
-
Hyungwon Hwang authored
This dependency is a historical thing. It is added when this DP driver is under media subsystem. Now because it is under Exynos DRM, this dependency is not needed anymore. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Silence the following -Wmaybe-uninitialized warnings and make the code more clear. drivers/gpu/drm/i915/intel_display.c: In function ‘__intel_set_mode’: drivers/gpu/drm/i915/intel_display.c:11844:14: warning: ‘crtc_state’ may be used uninitialized in this function [-Wmaybe-uninitialized] return state->mode_changed || state->active_changed; ^ drivers/gpu/drm/i915/intel_display.c:11854:25: note: ‘crtc_state’ was declared here struct drm_crtc_state *crtc_state; ^ drivers/gpu/drm/i915/intel_display.c:11868:6: warning: ‘crtc’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (crtc != intel_encoder->base.crtc) ^ drivers/gpu/drm/i915/intel_display.c:11853:19: note: ‘crtc’ was declared here struct drm_crtc *crtc; Reported-by:Chris Wilson <chris@chris-wilson.co.uk> Suggested-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 19 Jun, 2015 18 commits
-
-
Daniel Thompson authored
gem_prime_map is not currently described in the DRM manual, lets document it. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Inki Dae authored
This patch resolves the issue that refresh rate got low at extension mode test with fimd and vidi combination. The problem was because atomic_commit callback waited for the completion of vblank to gaurantee crtc relevant registers are updated from shadow registers to real ones. However, the waiting there is really unnecessary because page flip operation does already it. Signed-off-by: -
Krzysztof Kozlowski authored
The field 'vma' of 'exynos_drm_gem_obj' structure was introduced in 2a3098ff ("drm/exynos: add userptr feature for g2d module") but is not referenced anywhere. One instance of 'exynos_drm_gem_obj' may be mapped to multiple user-space VMAs so 'vma' field does not look useful anyway. Signed-off-by:
-
Inki Dae authored
This patch resolves page fault issue with iommu and atomic feature when modetest test application is terminated. ENWIN_F field of WINCONx register enables or disable a dma channel to each hardware overlay - the value of the field will be updated to real register after vsync. So this patch makes sure the dma channel is disabled by waiting for vsync one time after clearing shadow registers to all dma channels. Below shows the page fault issue: setting mode 720x1280-60Hz@XR24 on connectors 31, crtc 29 freq: 59.99Hz [ 34.831025] PAGE FAULT occurred at 0x20400000 by 11e20000.sysmmu(Page table base: 0x6e324000) [ 34.838072] Lv1 entry: 0x6e92dc01 [ 34.841489] ------------[ cut here ]------------ [ 34.846058] kernel BUG at drivers/iommu/exynos-iommu.c:364! [ 34.851614] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 34.857428] Modules linked in: <--snip--> [ 35.210894] [<c02880d0>] (exynos_sysmmu_irq) from [<c00608f8>] (handle_irq_event_percpu+0x78/0x134) [ 35.219914] [<c00608f8>] (handle_irq_event_percpu) from [<c00609f0>] (handle_irq_event+0x3c/0x5c) [ 35.228768] [<c00609f0>] (handle_irq_event) from [<c0063698>] (handle_level_irq+0xc4/0x13c) [ 35.237101] [<c0063698>] (handle_level_irq) from [<c005ff7c>] (generic_handle_irq+0x2c/0x3c) [ 35.245521] [<c005ff7c>] (generic_handle_irq) from [<c02214ec>] (combiner_handle_cascade_irq+0x94/0x100) [ 35.254980] [<c02214ec>] (combiner_handle_cascade_irq) from [<c005ff7c>] (generic_handle_irq+0x2c/0x3c) [ 35.264353] [<c005ff7c>] (generic_handle_irq) from [<c0060248>] (__handle_domain_irq+0x7c/0xec) [ 35.273034] [<c0060248>] (__handle_domain_irq) from [<c0009434>] (gic_handle_irq+0x30/0x68) [ 35.281366] [<c0009434>] (gic_handle_irq) from [<c0012ec0>] (__irq_svc+0x40/0x74) Signed-off-by: -
Marek Szyprowski authored
DRM Exynos driver is relying on dma-mapping internal structures when used with IOMMU enabled. This patch partially hides dma-mapping internal things by using proper get_dma_ops/set_dma_ops calls. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds code, which detach sub-device nodes from default iommu domain if such has been configured. This lets Exynos DRM driver to properly attach sub-devices to its own, common for all sub-devices domain. Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Marek Szyprowski authored
One should not do any assumptions on the stare of the fimd hardware during driver initialization, so to properly reset fimd before enabling IOMMU, one should ensure that all power domains and clocks are really enabled. This patch adds pm_runtime and clocks management in the fimd_clear_channel() function to ensure that any access to fimd registers will be performed with clocks and power domains enabled. Signed-off-by:
-
Joonyoung Shim authored
When the fimd is disabled by fimd_disable(), enabled overlay layers also are disabled. If clocks for fimd are enabled by fimd_enable() on this case, it can lead IOMMU page fault. The reason is that VIDCON0_ENVID and VIDCON0_ENVID_F bits of VIDCON0 register are set still even though fimd is disabled, so it may continue display output of prior when clocks for fimd are enabled again. Signed-off-by:
-
Joonyoung Shim authored
With atomic modesetting all the control for CRTC, Planes, Encoders and Connectors should come from DRM core, so the driver is not allowed to enable or disable planes from inside the crtc_enable()/disable() call. But it needs to disable planes with crtc_disable in exynos driver internally. Because crtc is disabled before plane is disabled, it means plane_disable just returns without any register changes, then we cannot be sure setting register to disable plane when crtc is disable. This patch removes this chainned calls to enable plane from exynos hw drivers code letting only DRM core touch planes except to disable plane. Also it leads eliminable enabled and resume of struct exynos_drm_plane. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Joonyoung Shim authored
The reason waiting vblank is to be power gated and disabled clocks after dma operation is completed. The dma operation is stopped already before be power gated and clocks are disabled when mixer is disabled by commit 381be025("drm/exynos: stop mixer before gating clocks during poweroff"). Don't need to wait vblank anymore. Signed-off-by:
-
Hyungwon Hwang authored
FIMC & GSC driver can calculate the offset of planes. So there are use cases which IPP receives just one GEM handle of an image with multiple plane. This patch extends ipp_validate_mem_node() to validate this case. Signed-off-by:
-
Hyungwon Hwang authored
Config depends on the opreation. So it must be referenced by an operation id, not a property id. Signed-off-by:
-
Hyungwon Hwang authored
exynos_dsi_host_transfer() can be called through a panel driver while DSI is turning down. It is possible because the function checks only whether DSI is initialized or not, and there is a moment which DSI is set by uninitialized, but DSI is still turning down. To prevent it, DSI must be set by disabled before starting to be turned down, and exynos_dsi_host_transfer() must check whether DSI is enabled or not. Kernel dump: [ 4721.351448] Unhandled fault: synchronous external abort (0x96000210) at 0xffffff800015e018 [ 4721.351809] Internal error: : 96000210 [#1] PREEMPT SMP [ 4721.352031] Modules linked in: [ 4721.352173] CPU: 2 PID: 300 Comm: deviced Tainted: G W 4.0.4-01017-g7964a87 #1 [ 4721.353989] Hardware name: Samsung DRACO board (DT) [ 4721.358852] task: ffffffc0a0b70000 ti: ffffffc0a00ec000 task.ti: ffffffc0a00ec000 [ 4721.366327] PC is at exynos_dsi_enable_lane+0x14/0x5c [ 4721.371353] LR is at exynos_dsi_host_transfer+0x834/0x8d8 [ 4721.376731] pc : [<ffffffc000432bcc>] lr : [<ffffffc000434590>] pstate: 60000145 [ 4721.384107] sp : ffffffc0a00efbe0 [ 4721.387405] x29: ffffffc0a00efbe0 x28: ffffffc0a00ec000 [ 4721.392699] x27: ffffffc000968000 x26: 0000000000000040 [ 4721.397994] x25: ffffffc000f74dc0 x24: ffffffc0a00efec8 [ 4721.403290] x23: ffffffc0a4815400 x22: ffffffc0009f2729 [ 4721.408584] x21: ffffffc0a00efcc8 x20: ffffffc0a4a2a848 [ 4721.413879] x19: ffffffc0a4a2a818 x18: 0000000000000004 [ 4721.419173] x17: 0000007faa5cddf0 x16: ffffffc0001a40a8 [ 4721.424469] x15: 0000000000000009 x14: 000000000000000d [ 4721.429762] x13: 6e6e6f63206b726f x12: 0000000000000010 [ 4721.435058] x11: 0101010101010101 x10: 0000000000000000 [ 4721.440353] x9 : 000000000000000a x8 : 8386838282818381 [ 4721.445648] x7 : ffffffc0a201efe8 x6 : 0000000000000000 [ 4721.450943] x5 : 00000000fffffffa x4 : ffffffc0a201f170 [ 4721.456237] x3 : ffffff800015e000 x2 : ffffff800015e018 [ 4721.461531] x1 : 000000000000000f x0 : ffffffc0a4a2a818 [ 4721.466826] [ 4721.468305] Process deviced (pid: 300, stack limit = 0xffffffc0a00ec028) [ 4721.474989] Stack: (0xffffffc0a00efbe0 to 0xffffffc0a00f0000) [ 4721.480720] fbe0: a00efca0 ffffffc0 0042c944 ffffffc0 a0f2d680 ffffffc0 00000024 00000000 [ 4721.488895] fc00: a4b6d000 ffffffc0 009f2729 ffffffc0 a4815400 ffffffc0 a00efec8 ffffffc0 Signed-off-by:
-
Andrzej Hajda authored
SoC checking code is not necessary anymore, as exynos_drm_match_add and exynos_drm_platform_probe already properly handles situation when there are no Exynos DRM components. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Tested-by:
-
Andrzej Hajda authored
In case there are multiple pipelines and deferred probe occurs, only components of the first pipeline were bound. As a result only one pipeline was available. The main cause of this issue was dynamic generation of component match table - every component driver during probe registered itself on helper list, if there was at least one pipeline present on this list component match table were created without deferred components. This patch removes this helper list, instead it creates match table from existing devices requiring exynos_drm KMS drivers. This way match table do not depend on probe/deferral order and contains all KMS components. As a side effect patch makes the code cleaner and significantly smaller. Signed-off-by:
-
Andrzej Hajda authored
Code registering different drivers and simple platform devices was dispersed across multiple sub-modules. This patch moves it to one place. As a result initialization code is shorter and cleaner and should simplify further development. Signed-off-by:
-
Gustavo Padovan authored
Check error and call DRM_ERROR if clk_prepare_enable() fails. Signed-off-by:
-
Inki Dae authored
This patch makes one of Linux framebuffer and DRM CRTC drivers to be enabled. Display controllers, FIMD and DECON, can be controlled by Linux framebuffer or DRM CRTC drivers so only one of them should be enabled. Signed-off-by:
-
