- 18 Apr, 2017 6 commits
-
-
Eric Anholt authored
We were returning without decrementing if the error happened, meaning that at the next submit we wouldn't try to bring up the power domain. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170417162603.12726-1-eric@anholt.netReviewed-by:
Sean Paul <seanpaul@chromium.org>
-
Boris Brezillon authored
The HDMI driver is currently enabling all clocks at probe time and keeps the power-domain connected to the HDMI encoder enabled. Move all activation code to vc4_hdmi_encoder_enable() and make sure the clks and power domain are released when the HDMI encoder is not used by adding deactivation steps in vc4_hdmi_encoder_disable(). Note that the sequencing imposed by the IP requires that we move vc4_hdmi_encoder_mode_set() code into vc4_hdmi_encoder_enable(). Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Eric Anholt authored
The stub get_unmapped_area() function was actually getting called, so all of our mmap()s failed. Cc: Yannick Fertre <yannick.fertre@st.com> Fixes: 97bf3a9a ("drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area") Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
All the error codes we (ab)use are strictly not the right ones (since they're all for the vfs, and the only thing we're allowed to do from an ioctl is EINVAL). But ENOENT is the common error code for failed to look up an object throughout drm, so let's use it in the cma helpers, too. Note that this does change uabi for some drivers, but that shouldn't ba a problem: - other drivers (e.g. i915) already return ENOENT for invalid gem bo - userspace tends to only check for errors, not specific ones (except when ioctl restarting is needed) - if the gem bo isn't there a previous step (either creating or importing it) failed already, this situation should always be a userspace bug. Changing it does help with debugging userspace bugs though, by making error reporting more consistent. Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418121120.31862-1-daniel.vetter@ffwll.ch
-
Dave Airlie authored
sync_file uses the reference count of the file, the internal kref was never getting moved past 1. We can reintroduce this if we decide we need it later. [airlied: fix buildbot warnings] Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170413014144.637-2-airlied@gmail.com
-
Daniel Vetter authored
Motivated by a request from Eric. v2: Take in suggestions from Lionel Cc: Eric Anholt <eric@anholt.net> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
- 14 Apr, 2017 5 commits
-
-
Yannick Fertre authored
Add Philippe Cornu and myself as maintainers. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Yannick Fertre authored
This controller provides output signals to interface directly a variety of LCD and TFT panels. These output signals are: RGB signals (up to 24bpp), vertical & horizontal synchronisations, data enable and the pixel clock. Reviewed-by:
-
Yannick Fertre authored
This patch adds documentation of device tree bindings for the STM32 LTDC (Lcd-Tft Display Controller). Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yannick Fertre authored
Add function drm_fb_cma_get_gem_addr() which return the physical address of framebuffer (1st pixel). This function will usually be called by plane callback (atomic_update). Signed-off-by:
-
Yannick Fertre authored
Missing field get_unmapped_area which is necessary with device without MMU Signed-off-by:
-
- 13 Apr, 2017 4 commits
-
-
Eric Anholt authored
This is needed for proper synchronization with display on another DRM device (pl111 or tinydrm) with buffers produced by vc4 V3D. Fixes the new igt vc4_dmabuf_poll testcase, and rendering of one of the glmark2 desktop tests on pl111+vc4. This doesn't yet introduce waits on another device's fences before vc4's rendering/display, because I don't have testcases for them. v2: Reuse dma_fence_free(), retitle commit message to clarify that it's not a full dma-buf fencing implementation yet. Signed-off-by: -
Liu Ying authored
Trivial fix. Some dev_err messages in this driver are missing \n, so add them. Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491877339-19913-1-git-send-email-gnuiyl@gmail.com
-
Daniel Vetter authored
Forgot to add this :( Fixes: 19315294 ("drm: Add acquire ctx parameter to ->plane_disable") Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DRM_DEBUG_ATOMIC debug message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 10 Apr, 2017 1 commit
-
-
Archit Taneja authored
Add Laurent as a reviewer and Andrzej as a maintainer for DRM bridge chip drivers. They actively review and contribute to bridge drivers and the bridge API. Acked-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170410063641.17704-1-architt@codeaurora.org
-
- 07 Apr, 2017 17 commits
-
-
Sean Paul authored
This reverts commit b8dfa821 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Apr 7 12:17:12 2017 +0100 drm: Don't allow interruptions when opening debugfs/crc It reportedly breaks things, so let's revert now and try again later. Fixes: b8dfa821 ("drm: Don't allow interruptions when opening debugfs/crc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reported-by:
-
Daniel Vetter authored
I thought I've fixed this, but maybe not. Anyway, clearly broken, and easy fix. Cc: Tony Lindgren <tony@atomide.com> Reported-by:
Tony Lindgren <tony@atomide.com> Fixes: b95ff031 ("drm: Remove drm_modeset_(un)lock_crtc") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
Daniel Vetter authored
I've broken this by removing the backoff handling from the set_config2atomic helper in commit 38b6441e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 22 22:50:58 2017 +0100 drm/atomic-helper: Remove the backoff hack from set_config Fixing this properly would mean we get to wire the acquire_ctx all the way through vmwgfx fbdev code, and doing the same was tricky for the shared fbdev layer. Probably much better to look into refactoring the entire code to use the helpers, but since that's not a viable long-term solution fix the issue by open-coding a vmwgfx version of set_config, that does the legacy backoff dance internally. Note: Just compile-tested. The idea is to take drm_mode_set_config_internal(), remove the "is this a legacy driver" check, and whack the drm_atomic_legacy_backoff trickery at the end. Since drm_atomic_legacy_backoff is for atomic commits only we need to open-code it. Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Jeffy Chen authored
Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
Current drm bind/unbind sequence would cause some memory issues. For example we should not cleanup iommu before cleanup mode config. Reorder bind/unbind sequence, follow exynos drm. Signed-off-by:
-
Jeffy Chen authored
The clock is enabled when binding cdn dp. Signed-off-by:
-
Jeffy Chen authored
The clocks are prepared when binding vop. Signed-off-by:
-
Jeffy Chen authored
We're trying to access vop registers here, so need to make sure the pm domain is on. Normally it should be enabled by the bootloader, but there's no guarantee of it. And if we wanna do unbind/bind, it would also cause the device to hang. And this patch also does these: 1/ move vop_initial to the end of vop_bind for eaiser error handling. 2/ correct the err_put_pm_runtime of vop_enable. Signed-off-by:
-
Jeffy Chen authored
After snd_soc_unregister_codec, the dai link would remain bound to the invalid codec. That would cause crashes after unbind dp driver. Let's unregister audio codec when removing dp driver to prevent that. Signed-off-by:
-
Jeffy Chen authored
Signed-off-by:
-
Jeffy Chen authored
Normally we do this in drm_mode_config_cleanup. But: 1/ analogix dp's connector is allocated in bind, and freed after unbind. So we need to destroy it in unbind to avoid further access. 2/ the drm bridge is attached in bind, and detached in encoder cleanup. So we need to destroy encoder in unbind. Signed-off-by:
-
Jeffy Chen authored
The clock is enabled when binding analogix dp. Signed-off-by:
-
Jeffy Chen authored
The dp aux is registered when binding analogix dp. Signed-off-by:
-
Jeffy Chen authored
The panel is attached when binding analogix dp. Signed-off-by:
-
Chris Wilson authored
The code does not like to be interrupted when waiting for the first vblank after opening a debugfs/crc channel, so don't. [66285.716870] WARNING: CPU: 1 PID: 16615 at drivers/gpu/drm/drm_debugfs_crc.c:185 crtc_crc_open+0x1d0/0x1f0 [drm] [66285.716877] Modules linked in: i915 intel_powerclamp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd intel_gtt i2c_algo_bit lpc_ich mfd_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers drm video button autofs4 sd_mod ahci libahci libata i2c_i801 scsi_mod i2c_designware_platform i2c_designware_core i2c_core [66285.716929] CPU: 1 PID: 16615 Comm: kms_frontbuffer Not tainted 4.11.0-rc5+ #7 [66285.716935] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016 [66285.716941] Call Trace: [66285.716955] dump_stack+0x4d/0x6f [66285.716966] __warn+0xc1/0xe0 [66285.716975] warn_slowpath_null+0x18/0x20 [66285.717004] crtc_crc_open+0x1d0/0x1f0 [drm] [66285.717014] ? wake_atomic_t_function+0x50/0x50 [66285.717024] full_proxy_open+0xf0/0x1b0 [66285.717032] ? full_proxy_release+0x80/0x80 [66285.717042] do_dentry_open.isra.17+0x14b/0x2d0 [66285.717051] vfs_open+0x42/0x60 [66285.717064] path_openat+0x5e7/0x13d0 [66285.717074] ? refcount_dec_and_test+0x11/0x20 [66285.717081] ? down_read+0xd/0x30 [66285.717087] do_filp_open+0x85/0xf0 [66285.717093] ? __vfs_write+0x23/0x120 [66285.717100] ? __alloc_fd+0x3a/0x170 [66285.717107] do_sys_open+0x11e/0x1f0 [66285.717113] ? do_sys_open+0x11e/0x1f0 [66285.717119] SyS_openat+0xf/0x20 [66285.717125] entry_SYSCALL_64_fastpath+0x17/0x98 [66285.717131] RIP: 0033:0x7f5f2235146a [66285.717135] RSP: 002b:00007ffd892e6bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [66285.717142] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5f2235146a [66285.717147] RDX: 0000000000000000 RSI: 00007ffd892e6c40 RDI: 0000000000000006 [66285.717151] RBP: 00007ffd892e6b20 R08: 0000000000000000 R09: 000000000000000f [66285.717156] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [66285.717161] R13: 00007ffd892e6b10 R14: 0000000000000004 R15: 00000000007e61f4 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100610 Fixes: e8fa5671 ("drm: crc: Wait for a frame before returning from open()") Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Gerd Hoffmann authored
Reported-by:
李强 <liqiang6-s@360.cn> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com
-
Neil Armstrong authored
The plat_data->input_bus_format and plat_data->input_bus_encoding are unsigned long and are always >=0, but the value 0 was still considered as RGB888 for input_bus_format and default color space for input_bus_encoding in the reworked code. This patch changes the if statement check for a non-zero value to either use the default input bus_format and/or bus_encoding for a zero value and the provided bus_format and/or bus_encoding for a non zero value. Thanks to Dan Carpenter for his bug report at [1]. Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough). [1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by:
-
- 06 Apr, 2017 7 commits
-
-
Rob Herring authored
The OMAP driver has its own OF graph helpers that are similar to the common helpers. This commit replaces most of the calls with the common helpers. There's still a couple of custom helpers left, but the driver needs more extensive changes to get rid of them. In dss_init_ports, we invert the loop, looping through the known ports and matching them to DT nodes rather than looping thru DT nodes and matching them to the ports. Signed-off-by:
-
Rob Herring authored
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by:
-
Rob Herring authored
Convert drivers to use the new of_graph_get_remote_node() helper instead of parsing the endpoint node and then getting the remote device node. Now drivers can just specify the device node and which port/endpoint and get back the connected remote device node. The details of the graph binding are nicely abstracted into the core OF graph code. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Tested-by:
Jyri Sarha <jsarha@ti.com> Tested by: Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Rob Herring authored
Many drivers have a common pattern of searching the OF graph for either an attached panel or bridge and then finding the DRM struct for the panel or bridge. Also, most drivers need to handle deferred probing when the DRM device is not yet instantiated. Create a common function, drm_of_find_panel_or_bridge, to find the connected node and the associated DRM panel or bridge device. Signed-off-by:
-
Rob Herring authored
For drm_of_find_panel_or_bridge() added in the next commit, an empty version of of_drm_find_panel is needed for !CONFIG_DRM_PANEL. Signed-off-by:
-
Maarten Lankhorst authored
The atomic_check function is useful for implementing properties, but it can be used for other connector modeset related checks as well. Similar to plane check functions, on a modeset atomic_check() is always called. Changes since v1: - Make sure atomic_check() is called on any modeset. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
Now that handle_conflicting_encoders no longer touches active state, so there's no need to do the check quite that late any more. Doing it with all the other checks makes it a lot more clear what the below block tries to accomplish, and this feels like a better place to put the check. Signed-off-by:
-
