- 26 Dec, 2019 6 commits
-
-
Taehee Yoo authored
hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up for i in {0..9} do for j in {0..9} do for k in {0..9} do for l in {0..9} do arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 & done done done done Splat looks like: [ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0. [ 236.069617][ T3286] ------------[ cut here ]------------ [ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25! [ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209 [ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0 [ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b [ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286 [ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000 [ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf [ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9 [ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28 [ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02 [ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0 [ 236.146776][ T3286] Call Trace: [ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr] [ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr] [ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0 [ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr] [ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740 [ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10 [ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0 [ ... ] Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
hsr interface has own debugfs file, which name is same with interface name. So, interface name is changed, debugfs file name should be changed too. Fixes: fc4ecaee ("net: hsr: add debugfs support for display node list") Signed-off-by:
-
Taehee Yoo authored
In current hsr code, when hsr interface is created, it creates debugfs directory /sys/kernel/debug/<interface name>. If there is same directory or file name in there, it fails. In order to reduce possibility of failure of creation of debugfs, this patch adds root directory. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 Before this patch: /sys/kernel/debug/hsr0/node_table After this patch: /sys/kernel/debug/hsr/hsr0/node_table Signed-off-by: -
Taehee Yoo authored
hsr_dev_finalize() is called to create new hsr interface. There are some wrong error handling codes. 1. wrong checking return value of debugfs_create_{dir/file}. These function doesn't return NULL. If error occurs in there, it returns error pointer. So, it should check error pointer instead of NULL. 2. It doesn't unregister interface if it fails to setup hsr interface. If it fails to initialize hsr interface after register_netdevice(), it should call unregister_netdevice(). 3. Ignore failure of creation of debugfs If creating of debugfs dir and file is failed, creating hsr interface will be failed. But debugfs doesn't affect actual logic of hsr module. So, ignoring this is more correct and this behavior is more general. Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: -
Taehee Yoo authored
When hsr module is being removed, debugfs_remove() is called to remove both debugfs directory and file. When module is being removed, module state is changed to MODULE_STATE_GOING then exit() is called. At this moment, module couldn't be held so try_module_get() will be failed. debugfs's open() callback tries to hold the module if .owner is existing. If it fails, warning message is printed. CPU0 CPU1 delete_module() try_stop_module() hsr_exit() open() <-- WARNING debugfs_remove() In order to avoid the warning message, this patch makes hsr module does not set .owner. Unsetting .owner is safe because these are protected by inode_lock(). Test commands: #SHELL1 ip link add dummy0 type dummy ip link add dummy1 type dummy while : do ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 modprobe -rv hsr done #SHELL2 while : do cat /sys/kernel/debug/hsr0/node_table done Splat looks like: [ 101.223783][ T1271] ------------[ cut here ]------------ [ 101.230309][ T1271] debugfs file owner did not clean up at exit: node_table [ 101.230380][ T1271] WARNING: CPU: 3 PID: 1271 at fs/debugfs/file.c:309 full_proxy_open+0x10f/0x650 [ 101.233153][ T1271] Modules linked in: hsr(-) dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_d] [ 101.237112][ T1271] CPU: 3 PID: 1271 Comm: cat Tainted: G W 5.5.0-rc1+ #204 [ 101.238270][ T1271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 101.240379][ T1271] RIP: 0010:full_proxy_open+0x10f/0x650 [ 101.241166][ T1271] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 04 86 7e ff 84 c0 75 2d 4c 8 [ 101.251985][ T1271] RSP: 0018:ffff8880ca22fa38 EFLAGS: 00010286 [ 101.273355][ T1271] RAX: dffffc0000000008 RBX: ffff8880cc6e6200 RCX: 0000000000000000 [ 101.274466][ T1271] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880c4dd5c14 [ 101.275581][ T1271] RBP: 0000000000000000 R08: fffffbfff2922f5d R09: 0000000000000000 [ 101.276733][ T1271] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc0551bc0 [ 101.277853][ T1271] R13: ffff8880c4059a48 R14: ffff8880be50a5e0 R15: ffffffff941adaa0 [ 101.278956][ T1271] FS: 00007f8871cda540(0000) GS:ffff8880da800000(0000) knlGS:0000000000000000 [ 101.280216][ T1271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.282832][ T1271] CR2: 00007f88717cfd10 CR3: 00000000b9440005 CR4: 00000000000606e0 [ 101.283974][ T1271] Call Trace: [ 101.285328][ T1271] do_dentry_open+0x63c/0xf50 [ 101.286077][ T1271] ? open_proxy_open+0x270/0x270 [ 101.288271][ T1271] ? __x64_sys_fchdir+0x180/0x180 [ 101.288987][ T1271] ? inode_permission+0x65/0x390 [ 101.289682][ T1271] path_openat+0x701/0x2810 [ 101.290294][ T1271] ? path_lookupat+0x880/0x880 [ 101.290957][ T1271] ? check_chain_key+0x236/0x5d0 [ 101.291676][ T1271] ? __lock_acquire+0xdfe/0x3de0 [ 101.292358][ T1271] ? sched_clock+0x5/0x10 [ 101.292962][ T1271] ? sched_clock_cpu+0x18/0x170 [ 101.293644][ T1271] ? find_held_lock+0x39/0x1d0 [ 101.305616][ T1271] do_filp_open+0x17a/0x270 [ 101.306061][ T1271] ? may_open_dev+0xc0/0xc0 [ ... ] Fixes: fc4ecaee ("net: hsr: add debugfs support for display node list") Signed-off-by: -
Netanel Belgazal authored
Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
- 25 Dec, 2019 19 commits
-
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-12-23 please apply the following patch series for qeth to your net tree. This brings two fixes for errors during device initialization, deals with several issues in the vnicc control code, and adds a missing lock. ==================== Signed-off-by: -
Julian Wiedmann authored
I stumbled over an old OSA model that claims to support DIAG_ASSIST, but then rejects the cmd to query its DIAG capabilities. In the old code this was ok, as the returned raw error code was > 0. Now that we translate the raw codes to errnos, the "rc < 0" causes us to fail the initialization of the device. The fix is trivial: don't bail out when the DIAG query fails. Such an error is not critical, we can still use the device (with a slightly reduced set of features). Fixes: 742d4d40 ("s390/qeth: convert remaining legacy cmd callbacks") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Alexandra Winter authored
During vnicc_init wanted_char should be compared to cur_char and not to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce the default values as desired values. Note, that it is expected, that a card comes online with default values. This patch was tested with private card firmware. Fixes: caa1f0b1 ("s390/qeth: add VNICC enable/disable support") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Alexandra Winter authored
Symptom: After vnicc/rx_bcast has been manually set to 0, bridge_* sysfs parameters can still be set or written. Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast. Vnic characteristics and bridgeport settings are mutually exclusive. rx_bcast defaults to 1, so manually setting it to 0 should disable bridge_* parameters. Instead it makes sense here to check the supported mask. If the card does not support vnicc at all, bridge commands are always allowed. Fixes: caa1f0b1 ("s390/qeth: add VNICC enable/disable support") Signed-off-by:
-
Alexandra Winter authored
Symptom: Error message "Configuring the VNIC characteristics failed" in dmesg whenever an OSA interface on z15 is set online. The VNIC characteristics get re-programmed when setting a L2 device online. This follows the selected 'wanted' characteristics - with the exception that the INVISIBLE characteristic unconditionally gets switched off. For devices that don't support INVISIBLE (ie. OSA), the resulting IO failure raises a noisy error message ("Configuring the VNIC characteristics failed"). For IQD, INVISIBLE is off by default anyways. So don't unnecessarily special-case the INVISIBLE characteristic, and thereby suppress the misleading error message on OSA devices. Fixes: caa1f0b1 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: -
Julian Wiedmann authored
qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't take the conf_mutex to ensure that the card stays in this state while being reconfigured. Rework the code to take this lock, and drop a redundant state check in a helper function. Fixes: b3332930 ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by:
-
Julian Wiedmann authored
qeth_l?_set_online() goes through a number of initialization steps, and on any error uses qeth_l?_stop_card() to tear down the residual state. The first initialization step is qeth_core_hardsetup_card(). When this fails after having established a QDIO context on the device (ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't shut down this QDIO context again (since the card state hasn't progressed from DOWN at this stage). Even worse, we then call qdio_free() as final teardown step to free the QDIO data structures - while some of them are still hooked into wider QDIO infrastructure such as the IRQ list. This is inevitably followed by use-after-frees and other nastyness. Fix this by unconditionally calling qeth_qdio_clear_card() to shut down the QDIO context, and also to halt/clear any pending activity on the various IO channels. Remove the naive attempt at handling the teardown in qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it properly now in the wider teardown code. Fixes: 4a71df50 ("qeth: new qeth device driver") Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== disable neigh update for tunnels during pmtu update When we setup a pair of gretap, ping each other and create neighbour cache. Then delete and recreate one side. We will never be able to ping6 to the new created gretap. The reason is when we ping6 remote via gretap, we will call like gre_tap_xmit() - ip_tunnel_xmit() - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() - ip6_confirm_neigh() - __ipv6_confirm_neigh() - n->confirmed = now As the confirmed time updated, in neigh_timer_handler() the check for NUD_DELAY confirm time will pass and the neigh state will back to NUD_REACHABLE. So the old/wrong mac address will be used again. If we do not update the confirmed time, the neigh state will go to neigh->nud_state = NUD_PROBE; then go to NUD_FAILED and re-create the neigh later, which is what IPv4 does. We couldn't remove the ip6_confirm_neigh() directly as we still need it for TCP flows. To fix it, we have to pass a bool parameter to dst_ops.update_pmtu() and only disable neighbor update for tunnels. v5: No code change, upate some commits description v4: No code change, upate some commits description v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. ==================== Signed-off-by: -
Hangbin Liu authored
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. So disable the neigh confirm for vxlan and geneve pmtu update. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Fixes: a93bf0ff ("vxlan: update skb dst pmtu on tx path") Fixes: 52a589d5 ("geneve: update skb dst pmtu on tx path") Reviewed-by:Guillaume Nault <gnault@redhat.com> Tested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: -
Hangbin Liu authored
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Although vti and vti6 are immune to this problem because they are IFF_NOARP interfaces, as Guillaume pointed. There is still no sense to confirm neighbour here. v5: Update commit description. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: -
Hangbin Liu authored
When do tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. v5: No Change. v4: Update commit description v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Fixes: 0dec879f ("net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TP") Reviewed-by: -
Hangbin Liu authored
Add a new function skb_dst_update_pmtu_no_confirm() for callers who need update pmtu but should not do neighbor confirm. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: -
Hangbin Liu authored
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not call dst_confirm_neigh(), we still set it to false to keep consistency with IPv6 code. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: -
Hangbin Liu authored
When we do ipv6 gre pmtu update, we will also do neigh confirm currently. This will cause the neigh cache be refreshed and set to REACHABLE before xmit. But if the remote mac address changed, e.g. device is deleted and recreated, we will not able to notice this and still use the old mac address as the neigh cache is REACHABLE. Fix this by disable neigh confirm when do pmtu update v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reported-by:Jianlin Shi <jishi@redhat.com> Reviewed-by:
-
Hangbin Liu authored
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fixes Here are a couple of bugfixes plus a patch that makes one of the bugfixes easier: (1) Move the ping and mutex unlock on a new call from rxrpc_input_packet() into rxrpc_new_incoming_call(), which it calls. This means the lock-unlock section is entirely within the latter function. This simplifies patch (2). (2) Don't take the call->user_mutex at all in the softirq path. Mutexes aren't allowed to be taken or released there and a patch was merged that caused a warning to be emitted every time this happened. Looking at the code again, it looks like that taking the mutex isn't actually necessary, as the value of call->state will block access to the call. (3) Fix the incoming call path to check incoming calls earlier to reject calls to RPC services for which we don't have a security key of the appropriate class. This avoids an assertion failure if YFS tries making a secure call to the kafs cache manager RPC service. ==================== Signed-off-by: -
Florian Fainelli authored
The IP fragment is specified through user-defined field as the first bit of the first user-defined word. We were previously trying to extract it from the user-defined mask which could not possibly work. The ip_frag is also supposed to be a boolean, if we do not cast it as such, we risk overwriting the next fields in CFP_DATA(6) which would render the rule inoperative. Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
The fix on 951c6db9 fixed the issued reported there but introduced another. When the allocation fails within sctp_stream_init() it is okay/necessary to free the genradix. But it is also called when adding new streams, from sctp_send_add_streams() and sctp_process_strreset_addstrm_in() and in those situations it cannot just free the genradix because by then it is a fully operational association. The fix here then is to only free the genradix in sctp_stream_init() and on those other call sites move on with what it already had and let the subsequent error handling to handle it. Tested with the reproducers from this report and the previous one, with lksctp-tools and sctp-tests. Reported-by: syzbot+9a1bc632e78a1a98488b@syzkaller.appspotmail.com Fixes: 951c6db9 ("sctp: fix memleak on err handling of stream initialization") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
- 24 Dec, 2019 1 commit
-
-
Antonio Messina authored
When the size of the receive buffer for a socket is close to 2^31 when computing if we have enough space in the buffer to copy a packet from the queue to the buffer we might hit an integer overflow. When an user set net.core.rmem_default to a value close to 2^31 UDP packets are dropped because of this overflow. This can be visible, for instance, with failure to resolve hostnames. This can be fixed by casting sk_rcvbuf (which is an int) to unsigned int, similarly to how it is done in TCP. Signed-off-by:
Antonio Messina <amessina@google.com> Signed-off-by:
-
- 22 Dec, 2019 12 commits
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Fix a few bugs that could lead to corrupt files, fsck complaints, and filesystem crashes: - Minor documentation fixes - Fix a file corruption due to read racing with an insert range operation. - Fix log reservation overflows when allocating large rt extents - Fix a buffer log item flags check - Don't allow administrators to mount with sunit= options that will cause later xfs_repair complaints about the root directory being suspicious because the fs geometry appeared inconsistent - Fix a non-static helper that should have been static" * tag 'xfs-5.5-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Make the symbol 'xfs_rtalloc_log_count' static xfs: don't commit sunit/swidth updates to disk if that would cause repair failures xfs: split the sunit parameter update into two parts xfs: refactor agfl length computation function libxfs: resync with the userspace libxfs xfs: use bitops interface for buf log item AIL flag check xfs: fix log reservation overflows when allocating large rt extents xfs: stabilize insert range start boundary to avoid COW writeback race xfs: fix Sphinx documentation warning -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Ext4 bug fixes, including a regression fix" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: clarify impact of 'commit' mount option ext4: fix unused-but-set-variable warning in ext4_add_entry() jbd2: fix kernel-doc notation warning ext4: use RCU API in debug_print_tree ext4: validate the debug_want_extra_isize mount option at parse time ext4: reserve revoke credits in __ext4_new_inode ext4: unlock on error in ext4_expand_extra_isize() ext4: optimize __ext4_check_dir_entry() ext4: check for directory entries too close to block end ext4: fix ext4_empty_dir() for directories with holes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay -
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "PPC: - Fix a bug where we try to do an ultracall on a system without an ultravisor KVM: - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups MIPS: - Now orphan, James Hogan is stepping down x86: - MAINTAINERS change, so long Radim and thanks for all the fish - supported CPUID fixes for AMD machines without SPEC_CTRL" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MAINTAINERS: remove Radim from KVM maintainers MAINTAINERS: Orphan KVM for MIPS kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor KVM: arm/arm64: Properly handle faulting of device mappings KVM: arm64: Ensure 'params' is initialised when looking up sys register KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region KVM: arm64: Don't log IMP DEF sysreg traps KVM: arm64: Sanely ratelimit sysreg messages KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create() KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy() KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode() -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ... -
Jan Stancek authored
LTP pipeio_1 test is hanging with v5.5-rc2-385-gb8e382a1, with read side observing empty pipe and sleeping and write side running out of space and then sleeping as well. In this scenario there are 5 writers and 1 reader. Problem is that after pipe_write() reacquires pipe lock, it re-checks for empty pipe with potentially stale 'head' and doesn't wake up read side anymore. pipe->tail can advance beyond 'head', because there are multiple writers. Use pipe->head for empty pipe check after reacquiring lock to observe current state. Testing: With patch, LTP pipeio_1 ran successfully in loop for 1 hour. Without patch it hanged within a minute. Fixes: 1b6b26ae ("pipe: fix and clarify pipe write wakeup logic") Reported-by:
Rachel Sibley <rasibley@redhat.com> Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.5 - Fix a bug where we try to do an ultracall on a system without an ultravisor.
-
Paolo Bonzini authored
Radim's kernel.org email is bouncing, which I take as a signal that he is not really able to deal with KVM at this time. Make MAINTAINERS match the effective value of KVM's bus factor. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
I haven't been active for 18 months, and don't have the hardware set up to test KVM for MIPS, so mark it as orphaned and remove myself as maintainer. Hopefully somebody from MIPS can pick this up. Signed-off-by:
James Hogan <jhogan@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Jan Kara authored
The description of 'commit' mount option dates back to ext3 times. Update the description to match current meaning for ext4. Reported-by:
Paul Richards <paul.richards@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191218111210.14161-1-jack@suse.czSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Yunfeng Ye authored
Warning is found when compile with "-Wunused-but-set-variable": fs/ext4/namei.c: In function ‘ext4_add_entry’: fs/ext4/namei.c:2167:23: warning: variable ‘sbi’ set but not used [-Wunused-but-set-variable] struct ext4_sb_info *sbi; ^~~ Fix this by moving the variable @sbi under CONFIG_UNICODE. Signed-off-by:Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/cb5eb904-224a-9701-c38f-cb23514b1fff@huawei.comSigned-off-by:
-
- 21 Dec, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix memory leak on error path of process_system_preds() - Lock inversion fix with updating tgid recording option - Fix histogram compare function on big endian machines - Fix histogram trigger function on big endian machines - Make trace_printk() irq sync on init for kprobe selftest correctness * tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix endianness bug in histogram trigger samples/trace_printk: Wait for IRQ work to finish tracing: Fix lock inversion in trace_event_enable_tgid_record() tracing: Have the histogram compare functions convert to u64 first tracing: Avoid memory leak in process_system_preds()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "A minor regression fix. The libnvdimm unit tests were expecting to mock calls to ioremap_nocache() which disappeared in v5.5-rc1. This fix has appeared in -next and collided with some cleanups that Christoph has planned for v5.6, but he will fix up his branch once this goes in. Summary: - Restore the operation of the libnvdimm unit tests after the removal of ioremap_nocache()" * tag 'libnvdimm-fix-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: tools/testing/nvdimm: Fix mock support for ioremap
-
