Pull virtio updates from Michael Tsirkin:
 "vhost, vdpa, and virtio cleanups and fixes

  A very quiet cycle, no new features"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  MAINTAINERS: add URL for virtio-mem
  vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call
  vringh: fix __vringh_iov() when riov and wiov are different
  vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK
  s390: virtio: PV needs VIRTIO I/O device protection
  virtio: let arch advertise guest's memory access restrictions
  vhost_vdpa: Fix duplicate included kernel.h
  vhost: reduce stack usage in log_used
  virtio-mem: Constify mem_id_table
  virtio_input: Constify id_table
  virtio-balloon: Constify id_table
  vdpa/mlx5: Fix failure to bring link up
  vdpa/mlx5: Make use of a specific 16 bit endianness API

Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros-ec:
   - Error code cleanup across cros-ec by Guenter
   - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status

  cros_ec_typec:
   - Landed initial USB4 support in typec connector class driver for
     cros_ec
   - Role switch bugfix on disconnect, and reordering configuration
     steps

  cros_ec_lightbar:
   - Fix buffer outsize and result for get_lightbar_version

  misc:
   - Remove config MFD_CROS_EC, now that transition from MFD is complete
   - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
     keymap"

* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
  platform/chrome: Use kobj_to_dev() instead of container_of()
  platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
  platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
  platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
  platform/chrome: cros_ec_trace: Add fields to command traces
  platform/chrome: cros_ec_typec: Re-order connector configuration steps
  platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
  platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
  platform/chrome: cros_ec_typec: USB4 support
  pwm: cros-ec: Simplify EC error handling
  platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
  platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
  pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
  platform/chrome: cros_ec_sysfs: Report range of error codes from EC
  cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
  iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

Pull arch task_work cleanups from Jens Axboe:
 "Two cleanups that don't fit other categories:

   - Finally get the task_work_add() cleanup done properly, so we don't
     have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
     all callers, and also fixes up the documentation for
     task_work_add().

   - While working on some TIF related changes for 5.11, this
     TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
     duplication for how that is handled"

* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
  task_work: cleanup notification modes
  tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()

Pull ARC fix from Vineet Gupta:
 "I found a snafu in perf driver which made it into 5.9-rc4 and the fix
  should go in now than wait"

* tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: redo the pct irq missing in device-tree handling

Pull more arm64 updates from Will Deacon:
 "A small selection of further arm64 fixes and updates. Most of these
  are fixes that came in during the merge window, with the exception of
  the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
  and somehow forgot to enable upstream.

   - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
     you're lucky enough to have one)

   - Select HAVE_MOVE_PMD. This has been shown to improve mremap()
     performance, which is used heavily by the Android runtime GC, and
     it seems we forgot to enable this upstream back in 2018.

   - Ensure linker flags are consistent between LLVM and BFD

   - Fix stale comment in Spectre mitigation rework

   - Fix broken copyright header

   - Fix KASLR randomisation of the linear map

   - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"

Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: proton-pack: Update comment to reflect new function name
  arm64: spectre-v2: Favour CPU-specific mitigation at EL2
  arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
  arm64: Fix a broken copyright header in gen_vdso_offsets.sh
  arm64: mremap speedup - Enable HAVE_MOVE_PMD
  arm64: mm: use single quantity to represent the PA to VA translation
  arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks

Pull Kconfig updates from Masahiro Yamada:

 - Remove unused or useless code from qconf

 - Allow to edit "int", "hex", "string" options in place, and remove the
   separate edit box from qconf

* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: qconf: create QApplication after option checks
  kconfig: qconf: remove Y, M, N columns
  kconfig: qconf: remove ConfigView class
  kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
  kconfig: qconf: remove ConfigLineEdit class
  kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
  kconfig: qconf: show data column all the time
  kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
  kconfig: qconf: remove unused ConfigItem::okRename()
  kconfig: qconf: update the intro message to match to the current code
  kconfig: qconf: reformat the intro message

Pull Kbuild updates from Masahiro Yamada:

 - Support 'make compile_commands.json' to generate the compilation
   database more easily, avoiding stale entries

 - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
   using clang-tidy

 - Preprocess scripts/modules.lds.S to allow CONFIG options in the
   module linker script

 - Drop cc-option tests from compiler flags supported by our minimal
   GCC/Clang versions

 - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y

 - Use sha1 build id for both BFD linker and LLD

 - Improve deb-pkg for reproducible builds and rootless builds

 - Remove stale, useless scripts/namespace.pl

 - Turn -Wreturn-type warning into error

 - Fix build error of deb-pkg when CONFIG_MODULES=n

 - Replace 'hostname' command with more portable 'uname -n'

 - Various Makefile cleanups

* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: Use uname for LINUX_COMPILE_HOST detection
  kbuild: Only add -fno-var-tracking-assignments for old GCC versions
  kbuild: remove leftover comment for filechk utility
  treewide: remove DISABLE_LTO
  kbuild: deb-pkg: clean up package name variables
  kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
  kbuild: enforce -Werror=return-type
  scripts: remove namespace.pl
  builddeb: Add support for all required debian/rules targets
  builddeb: Enable rootless builds
  builddeb: Pass -n to gzip for reproducible packages
  kbuild: split the build log of kallsyms
  kbuild: explicitly specify the build id style
  scripts/setlocalversion: make git describe output more reliable
  kbuild: remove cc-option test of -Werror=date-time
  kbuild: remove cc-option test of -fno-stack-check
  kbuild: remove cc-option test of -fno-strict-overflow
  kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
  kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
  kbuild: do not create built-in objects for external module builds
  ...

Pull modules updates from Jessica Yu:
 "Code cleanups: more informative error messages and statically
  initialize init_free_wq to avoid a workqueue warning"

* tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: statically initialize init section freeing data
  module: Add more error message for failed kernel module loading

Pull VFIO updates from Alex Williamson:

 - New fsl-mc vfio bus driver supporting userspace drivers of objects
   within NXP's DPAA2 architecture (Diana Craciun)

 - Support for exposing zPCI information on s390 (Matthew Rosato)

 - Fixes for "detached" VFs on s390 (Matthew Rosato)

 - Fixes for pin-pages and dma-rw accesses (Yan Zhao)

 - Cleanups and optimize vconfig regen (Zenghui Yu)

 - Fix duplicate irq-bypass token registration (Alex Williamson)

* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
  vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
  vfio/pci: Clear token on bypass registration failure
  vfio/fsl-mc: fix the return of the uninitialized variable ret
  vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
  vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
  MAINTAINERS: Add entry for s390 vfio-pci
  vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
  vfio/fsl-mc: Add support for device reset
  vfio/fsl-mc: Add read/write support for fsl-mc devices
  vfio/fsl-mc: trigger an interrupt via eventfd
  vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
  vfio/fsl-mc: Added lock support in preparation for interrupt handling
  vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
  vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
  vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
  vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
  vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
  s390/pci: track whether util_str is valid in the zpci_dev
  s390/pci: stash version in the zpci_dev
  vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This introduces rpmsg_char support for GLINK and fixes a few issues"

* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  rpmsg: glink: Expose rpmsg name attr for glink
  rpmsg: glink: Add support for rpmsg glink chrdev
  rpmsg: Guard against null endpoint ops in destroy
  rpmsg: glink: Use complete_all for open states
  rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
  rpmsg: Avoid double-free in mtk_rpmsg_register_device
  rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for the Mediatek MT9182 SCP and controlling
  the Cortex R5F processors found in TI K3 platforms. It clones the
  longstanding debugfs interface for controlling crash handling to
  sysfs. Lastly it solves a bug where after a warm reset of Qualcomm
  platforms the modem would crash upon first boot"

* tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  remoteproc/mediatek: Remove non-standard dsb()
  remoteproc: Add recovery configuration to the sysfs interface
  remoteproc: Add coredump as part of sysfs interface
  remoteproc: Change default dump configuration to "disabled"
  remoteproc: k3-r5: Add loading support for on-chip SRAM regions
  remoteproc: k3-r5: Initialize TCM memories for ECC
  remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
  dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
  remoteproc/mediatek: Add support for mt8192 SCP
  remoteproc: Fixup coredump debugfs disable request
  remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot
  remoteproc/mediatek: fix null pointer dereference on null scp pointer
  remoteproc: stm32: Fix pointer assignement
  remoteproc: scp: add COMPILE_TEST dependency

Pull clk updates from Stephen Boyd:
 "This contains no changes to the core framework. It is a collection of
  various clk driver updates.

  The biggest driver updates in terms of lines of code is the Allwinner
  driver, closely followed by the Qualcomm and Mediatek drivers. All of
  those hit high because we add so many lines of clk data. Coming in
  fourth place is i.MX which also adds a bunch of clk data. This
  accounts for the new driver additions this time around.

  Otherwise the patches are lots of little cleanups and fixes for
  various clk drivers that have baked in linux-next for a while. I
  suppose one highlight or theme is that more clk drivers are being
  updated to work as modules, which is interesting to see such critical
  SoC infrastructure work as a loadable module.

  New Drivers:
   - Support qcom SM8150/SM8250 video and display clks
   - Support Mediatek MT8167 clks
   - Add clock for CRC block found on vf610 SoCs
   - Add support for the Renesas R-Car V3U (R8A779A0) SoC
   - Add support for the VSP for Resizing clock on Renesas RZ/G1H
   - Support Allwinner A100 SoC clks

  Removed Drivers:
   - Remove i.MX21 clock driver, as i.MX21 platform support is being
     dropped

  Updates:
   - Change how qcom's display port clks work
   - Small non-critical fixes for TI clk driver
   - Remove various unused variables in clk drivers
   - Allow Rockchip clk driver to be a module
   - Remove most __clk_lookup() calls in Samsung drivers (yay!)
   - Support building i.MX ARMv8 platforms clock driver as module
   - Some kerneldoc fixes here and there
   - A couple of minor i.MX clk data corrections
   - Update audio clock inverter and fdiv2 flag on Amlogic g12
   - Make amlogic clk drivers configurable in Kconfig
   - Fix Renesas VSP clock names to match corrected hardware
     documentation
   - Sigma-delta modulation on Allwinner R40
   - Various fixes for at91 clk driver
   - Use semicolons instead of commas in some places
   - Mark some variables const so they can move to RO memory"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
  clk: imx8mq: Fix usdhc parents order
  clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
  clk: Restrict CLK_HSDK to ARC_SOC_HSDK
  clk: at91: sam9x60: support only two programmable clocks
  clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
  clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
  clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
  clk: ingenic: Use readl_poll_timeout instead of custom loop
  clk: ingenic: Use to_clk_info() macro for all clocks
  clk: bcm2835: add missing release if devm_clk_hw_register fails
  clk: at91: clk-sam9x60-pll: remove unused variable
  clk: at91: clk-main: update key before writing AT91_CKGR_MOR
  clk: at91: remove the checking of parent_name
  clk: clk-prima2: fix return value check in prima2_clk_init()
  clk: mmp2: Fix the display clock divider base
  clk: pxa: Constify static struct clk_ops
  clk: baikal-t1: Mark Ethernet PLL as critical
  clk: qoriq: modify MAX_PLL_DIV to 32
  clk: axi-clkgen: Set power bits for fractional mode
  clk: axi-clkgen: Add support for fractional dividers
  ...

Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This release cycle's updates are mostly cleanup and some minor fixes"

* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
  dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
  pwm: Allow store 64-bit duty cycle from sysfs interface
  pwm: img: Fix null pointer access in probe
  pwm: pca9685: Disable unused alternative addresses
  pwm: pca9685: Use BIT() macro instead of shift
  pwm: pca9685: Make comments more consistent
  pwm: sun4i: Simplify with dev_err_probe()
  pwm: sprd: Simplify with dev_err_probe()
  pwm: sifive: Simplify with dev_err_probe()
  pwm: rockchip: Simplify with dev_err_probe()
  pwm: jz4740: Simplify with dev_err_probe()
  pwm: bcm2835: Simplify with dev_err_probe()
  pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  pwm: rockchip: Keep enabled PWMs running while probing
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
     Liu)
   - Add schedule point in pci_read_config() to reduce max latency
     (Jiang Biao)
   - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

  Resource management:
   - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
     Pieralisi)

  PCIe native device hotplug:
   - Reduce noisiness on hot removal (Lukas Wunner)

  Power management:
   - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
     that was done on the basis of spec typo (Bjorn Helgaas)
   - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
     ambiguity (Krzysztof Wilczyński)
   - Remove unused pcibios_pm_ops (Vaibhav Gupta)

  IOMMU:
   - Enable Translation Blocking for external devices to harden against
     DMA attacks (Rajat Jain)

  Error handling:
   - Add an ACPI APEI notifier chain for vendor CPER records to enable
     device-specific error handling (Shiju Jose)

  ASPM:
   - Remove struct aspm_register_info to simplify code (Saheed O.
     Bolarinwa)

  Amlogic Meson PCIe controller driver:
   - Build as module by default (Kevin Hilman)

  Ampere Altra PCIe controller driver:
   - Add MCFG quirk to work around non-standard ECAM implementation
     (Tuan Phan)

  Broadcom iProc PCIe controller driver:
   - Set affinity mask on MSI interrupts (Mark Tomlinson)

  Broadcom STB PCIe controller driver:
   - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
   - Add DT bindings for more Brcmstb chips (Jim Quinlan)
   - Add bcm7278 register info (Jim Quinlan)
   - Add bcm7278 PERST# support (Jim Quinlan)
   - Add suspend and resume pm_ops (Jim Quinlan)
   - Add control of rescal reset (Jim Quinlan)
   - Set additional internal memory DMA viewport sizes (Jim Quinlan)
   - Accommodate MSI for older chips (Jim Quinlan)
   - Set bus max burst size by chip type (Jim Quinlan)
   - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Use dev_err_probe() to reduce redundant messages (Anson Huang)

  Freescale Layerscape PCIe controller driver:
   - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
   - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint test support for lS1088a (Xiaowei Bao)
   - Add MSI-X support for ls1088a (Xiaowei Bao)

  HiSilicon HIP PCIe controller driver:
   - Handle HIP-specific errors via ACPI APEI (Yicong Yang)

  HiSilicon Kirin PCIe controller driver:
   - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)

  Intel VMD host bridge driver:
   - Factor out physical offset, bus offset, IRQ domain, IRQ allocation
     (Jon Derrick)
   - Use generic PCI PM correctly (Jon Derrick)

  Marvell Aardvark PCIe controller driver:
   - Fix compilation on s390 (Pali Rohár)
   - Implement driver 'remove' function and allow to build it as module
     (Pali Rohár)
   - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
   - Convert mvebu a3700 internal SMCC firmware return codes to errno
     (Pali Rohár)
   - Fix initialization with old Marvell's Arm Trusted Firmware (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:
   - Fix hibernation in case interrupts are not re-created (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:
   - Stop checking return value of debugfs_create() functions (Greg
     Kroah-Hartman)
   - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)

  Qualcomm PCIe controller driver:
   - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)

  Renesas R-Car PCIe controller driver:
   - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
     (Lad Prabhakar)
   - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
   - Add DT support for r8a7742 (Lad Prabhakar)

  Socionext UniPhier Pro5 controller driver:
   - Add DT descriptions of iATU register (host and endpoint) (Kunihiko
     Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
     unavoidable) (Hou Zhiqiang)
   - Fix endpoint Header Type check so multi-function devices work (Hou
     Zhiqiang)
   - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
   - Stop leaking MSI page in suspend/resume (Jisheng Zhang)
   - Add common iATU register support instead of keystone-specific code
     (Kunihiko Hayashi)
   - Major config space access and other cleanups in dwc core and
     drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
     kirin, meson, qcom, tegra) (Rob Herring)
   - Add multiple PFs support for endpoint (Xiaowei Bao)
   - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)

  Miscellaneous:
   - Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
   - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
   - Fix "cast truncates bits from constant value" warnings (Gustavo
     Pimentel)
   - Remove redundant zeroing for sg_init_table() (Julia Lawall)
   - Use scnprintf(), not snprintf(), in sysfs "show" functions
     (Krzysztof Wilczyński)
   - Remove unused assignments (Krzysztof Wilczyński)
   - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
   - Simplify bool comparisons (Krzysztof Wilczyński)
   - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
     Miao)
   - Simplify return expressions (Qinglang Miao)"

* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper
  PCI: v3-semi: Remove unneeded break
  PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
  PCI/ASPM: Remove struct pcie_link_state.l1ss
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
  PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
  PCI/ASPM: Remove struct aspm_register_info.latency_encoding
  PCI/ASPM: Remove struct aspm_register_info.enabled
  PCI/ASPM: Remove struct aspm_register_info.support
  PCI/ASPM: Use 'parent' and 'child' for readability
  PCI/ASPM: Move LTR path check to where it's used
  PCI/ASPM: Move pci_clear_and_set_dword() earlier
  PCI: dwc: Fix MSI page leakage in suspend/resume
  ...

commit feb92d7d "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.

|
| if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|                           ^^^                         ^^^^

And given such a chance, the compiler will bite you hard, fully entitled
to generating this piece of beauty:

|
| # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|
| bl.d @platform_get_irq  <-- irq returned in r0
|
| setge r2, r0, 0   	<-- r2 is bool 1 or 0 if irq >= 0 true/false
| brlt.d r0, 0, @.L114
|
| st_s	r2,[sp]    	<-- irq saved is bool 1 or 0, not actual return val
| st	1,[r3,160]   	# arc_pmu.18_29->irq <-- drops bool and assumes 1
|
| # return __request_percpu_irq(irq, handler, 0,
|
| bl.d @__request_percpu_irq;
| mov_s	r0,1	   <-- drops even bool and assumes 1 which fails

With the snafu fixed, everything is as expected.

| bl.d @platform_get_irq	<-- returns irq in r0
|
| mov_s	r2,r0
| brlt.d r2, 0, @.L112
|
| st_s	r0,[sp]			<-- irq isaved is actual return value above
| st	r0,[r13,160]	#arc_pmu.18_27->irq
|
| bl.d @__request_percpu_irq	<-- r0 unchanged so actual irq returned
| add r4,r4,r12	#, tmp363, __ptr

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ext4 updates from Ted Ts'o:
 "The siginificant new ext4 feature this time around is Harshad's new
  fast_commit mode.

  In addition, thanks to Mauricio for fixing a race where mmap'ed pages
  that are being changed in parallel with a data=journal transaction
  commit could result in bad checksums in the failure that could cause
  journal replays to fail.

  Also notable is Ritesh's buffered write optimization which can result
  in significant improvements on parallel write workloads. (The kernel
  test robot reported a 330.6% improvement on fio.write_iops on a 96
  core system using DAX)

  Besides that, we have the usual miscellaneous cleanups and bug fixes"

Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
  ext4: fix invalid inode checksum
  ext4: add fast commit stats in procfs
  ext4: add a mount opt to forcefully turn fast commits on
  ext4: fast commit recovery path
  jbd2: fast commit recovery path
  ext4: main fast-commit commit path
  jbd2: add fast commit machinery
  ext4 / jbd2: add fast commit initialization
  ext4: add fast_commit feature and handling for extended mount options
  doc: update ext4 and journalling docs to include fast commit feature
  ext4: Detect already used quota file early
  jbd2: avoid transaction reuse after reformatting
  ext4: use the normal helper to get the actual inode
  ext4: fix bs < ps issue reported with dioread_nolock mount opt
  ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
  ext4: data=journal: fixes for ext4_page_mkwrite()
  jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
  jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
  ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
  ext4: use ext4_sb_bread() instead of sb_bread()
  ...

Pull initial set_fs() removal from Al Viro:
 "Christoph's set_fs base series + fixups"

* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Allow a NULL pos pointer to __kernel_read
  fs: Allow a NULL pos pointer to __kernel_write
  powerpc: remove address space overrides using set_fs()
  powerpc: use non-set_fs based maccess routines
  x86: remove address space overrides using set_fs()
  x86: make TASK_SIZE_MAX usable from assembly code
  x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
  lkdtm: remove set_fs-based tests
  test_bitmap: remove user bitmap tests
  uaccess: add infrastructure for kernel builds with set_fs()
  fs: don't allow splice read/write without explicit ops
  fs: don't allow kernel reads and writes without iter ops
  sysctl: Convert to iter interfaces
  proc: add a read_iter method to proc proc_ops
  proc: cleanup the compat vs no compat file ops
  proc: remove a level of indentation in proc_get_inode

Pull nfsd updates from Bruce Fields:
 "The one new feature this time, from Anna Schumaker, is READ_PLUS,
  which has the same arguments as READ but allows the server to return
  an array of data and hole extents.

  Otherwise it's a lot of cleanup and bugfixes"

* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
  NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
  SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
  sunrpc: raise kernel RPC channel buffer size
  svcrdma: fix bounce buffers for unaligned offsets and multiple pages
  nfsd: remove unneeded break
  net/sunrpc: Fix return value for sysctl sunrpc.transports
  NFSD: Encode a full READ_PLUS reply
  NFSD: Return both a hole and a data segment
  NFSD: Add READ_PLUS hole segment encoding
  NFSD: Add READ_PLUS data support
  NFSD: Hoist status code encoding into XDR encoder functions
  NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
  NFSD: Remove the RETURN_STATUS() macro
  NFSD: Call NFSv2 encoders on error returns
  NFSD: Fix .pc_release method for NFSv2
  NFSD: Remove vestigial typedefs
  NFSD: Refactor nfsd_dispatch() error paths
  NFSD: Clean up nfsd_dispatch() variables
  NFSD: Clean up stale comments in nfsd_dispatch()
  NFSD: Clean up switch statement in nfsd_dispatch()
  ...

Pull exfat updates from Namjae Jeon:

 - Replace memcpy with structure assignment

 - Remove unneeded codes and use helper function i_blocksize()

 - Fix typos found by codespell

* tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: remove useless check in exfat_move_file()
  exfat: remove 'rwoffset' in exfat_inode_info
  exfat: replace memcpy with structure assignment
  exfat: remove useless directory scan in exfat_add_entry()
  exfat: eliminate dead code in exfat_find()
  exfat: use i_blocksize() to get blocksize
  exfat: fix misspellings using codespell tool

Pull 9p updates from Dominique Martinet:
 "A couple of small fixes (loff_t overflow on 32bit, syzbot
  uninitialized variable warning) and code cleanup (xen)"

* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
  net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
  9p/xen: Fix format argument warning
  9P: Cast to loff_t before multiplying

During the stability test, there are some errors:
  ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.

If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.

Fix this problem by checking i_blocks in advance.

Cc: stable@kernel.org
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This commit adds a file in procfs that tracks fast commit related
statistics.

root@kvm-xfstests:/mnt# cat /proc/fs/ext4/vdc/fc_info
fc stats:
7772 commits
15 ineligible
4083 numblks
2242us avg_commit_time
Ineligible reasons:
"Extended attributes changed":  0
"Cross rename": 0
"Journal flag changed": 0
"Insufficient memory":  0
"Swap boot":    0
"Resize":       0
"Dir renamed":  0
"Falloc range op":      0
"FC Commit Failed":     15
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-10-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This is a debug only mount option that forcefully turns fast commits
on at mount time.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-9-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch adds fast commit recovery support in JBD2.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-7-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:

(A) Metadata updates tracking

    This part consists of helper functions to track changes that need
    to be committed during a commit operation. These updates are
    maintained by Ext4 in different in-memory queues. Following are
    the APIs and their short description that are implemented in this
    patch:

    - ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
      operations
    - ext4_fc_track_range() - Track changed logical block offsets
      inodes
    - ext4_fc_track_inode() - Track inodes
    - ext4_fc_mark_ineligible() - Mark file system fast commit
      ineligible()
    - ext4_fc_start_update() / ext4_fc_stop_update() /
      ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
      functions are useful for co-ordinating inode updates with
      commits.

(B) Main commit Path

    This part consists of functions to convert updates tracked in
    in-memory data structures into on-disk commits. Function
    ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This functions adds necessary APIs needed in JBD2 layer for fast
commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

We are running out of mount option bits. Add handling for using
s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add
ability to turn off the fast commit feature in Ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch adds necessary documentation for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-2-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In exfat_move_file(), the identity of source and target directory has been
checked by the caller.
Also, it gets stream.start_clu from file dir-entry, which is an invalid
determination.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Remove 'rwoffset' in exfat_inode_info and replace it with the parameter of
exfat_readdir().
Since rwoffset is referenced only by exfat_readdir(), it is not necessary
a exfat_inode_info's member.
Also, change cpos to point to the next of entry-set, and return the index
of dir-entry via dir_entry->entry.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Use structure assignment instead of memcpy.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

There is nothing in directory just created, so there is no need to scan.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

The exfat_find_dir_entry() called by exfat_find() doesn't return -EEXIST.
Therefore, the root-dir information setting is never executed.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

We alreday has the interface i_blocksize() to get blocksize,
so use it.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Sedat reported typos using codespell tool.

 $ codespell fs/exfat/*.c | grep -v iput
 fs/exfat/namei.c:293: upto ==> up to
 fs/exfat/nls.c:14: tabel ==> table

 $ codespell fs/exfat/*.h
 fs/exfat/exfat_fs.h:133: usally ==> usually

Fix typos found by codespell.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>

Pull watchdog updates from Wim Van Sebroeck:

 - Add Toshiba Visconti watchdog driver

 - it87_wdt: add IT8772 + IT8784

 - several fixes and improvements

* tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Add Toshiba Visconti watchdog driver
  watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device
  watchdog: it87_wdt: add IT8784 ID
  watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled
  watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
  watchdog: renesas_wdt: support handover from bootloader
  watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
  watchdog: rti: Simplify with dev_err_probe()
  watchdog: davinci: Simplify with dev_err_probe()
  watchdog: cadence: Simplify with dev_err_probe()
  watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>
  watchdog: Use put_device on error
  watchdog: Fix memleak in watchdog_cdev_register
  watchdog: imx7ulp: Strictly follow the sequence for wdog operations
  watchdog: it87_wdt: add IT8772 ID
  watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed
  drivers: watchdog: rdc321x_wdt: Fix race condition bugs

Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...

Pull dmi update from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT