Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

FIXADDR_TOP is used for HIGHMEM and for upper limit of vmalloc area on
32bit kernel.  TX39XX and TX49XX have "reserved" segment in CKSEG3
area.  0xff000000-0xff3fffff on TX49XX and 0xff000000-0xfffeffff on
TX39XX are reserved (unmapped, uncached) therefore can not be used as
mapped area.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The first timer interrupt setup already happens in time_init().
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

mips_cpu_irq_init() does clear_c0_status(ST0_IM) first, so
set_c0_status(ST0_IM) isn't necessary.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch removes unused system type name.
DDB5074 and DDB5476 were already removed.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

They have been obsoleted by the ELF header EI_CLASS and EI_DATA fields
in combination with e_flags.  Afaics EM_MIPS_RS3_LE and EM_MIPS_RS4_BE
never had any practical relevance.  Binutils will not produce such
binaries and the kernel will not accept them as MIPS binaries.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Without SMTC on non-Malta will blow up.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The driver has been removed a while ago already.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This fixes a resource collision of RAM and I/O memory on systems that
use the physical address space multiple times.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 o Fix the build error Wind River PPMC board caused by the change of
   plat_setup hook interface.
 o Rewrite first level interrupt dispatch code to C.
Signed-off-by: Rongkai.Zhan <rongkai.zhan@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The recent vsnprintf() fix introduced an off-by-one, and it's now
possible to overrun the target buffer by one byte.

The "end" pointer points to past the end of the buffer, so if we
have to truncate the result, it needs to be done though "end[-1]".

[ This is just an alternate and simpler patch to one proposed by Andrew
  and Jeremy, who actually noticed the problem ]
Acked-by: Andrew Morton <akpm@osdl.org>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] nommu: backtrace code must not reference a discarded section
  [ARM] nommu: Initial uCLinux support for MMU-based CPUs
  [ARM] nommu: prevent Xscale-based machines being selected
  [ARM] nommu: export flush_dcache_page()
  [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build
  [ARM] Remove TABLE_SIZE, and several unused function prototypes
  [ARM] nommu: Provide a simple flush_dcache_page implementation
  [ARM] nommu: add arch/arm/Kconfig-nommu to Kconfig files
  [ARM] nommu: add stubs for ioremap and friends
  [ARM] nommu: avoid selecting TLB and CPU specific copy code
  [ARM] nommu: uaccess tweaks
  [ARM] nommu: adjust headers for !MMU ARM systems
  [ARM] nommu: we need the TLS register emulation for nommu mode

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3672/1: PXA: don't probe output GPIOs for interrupt
  [ARM] 3671/1: ep93xx: add cirrus logic edb9315 support
  [ARM] 3370/2: ep93xx: add crunch support
  [ARM] 3665/1: crunch: add ptrace support
  [ARM] 3664/1: crunch: add signal frame save/restore
  [ARM] 3663/1: fix resource->end off-by-one thinko during physmap conversion
  [ARM] 3662/1: ixp23xx: don't include asm/hardware.h in uncompress.h
  [ARM] 3660/1: Remove legacy defines
  [ARM] 3661/1: S3C2412: Fix compilation if CPU_S3C2410 only
  [ARM] 3658/1: S3C244X: Change usb-gadget name to s3c2440-usbgadget
  [ARM] Remove the __arch_* layer from uaccess.h

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Documentation/watchdog update
  [WATCHDOG] convert AT91RM9200 watchdog to platform driver
  [WATCHDOG] add WDIOC_GETTIMELEFT ioctl
  [WATCHDOG] Pre-Timeout flags

plist.h uses container_of, which is defined in kernel.h.
Include kernel.h in plist.h as the kernel.h include does not longer
happen automatically on all architectures.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds earlier initialization of spi_device.mode, as needed
on boards using nondefault chipselect polarity.  An example would be
ones using the RS5C348 RTC without an external signal inverter between
the RTC chipselect and the SPI controller.

Without this mechanism, the first setup() call for that chip would
wrongly enable chips, corrupting transfers to/from other chips sharing
that SPI bus.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: db9 - fix potential buffer overrun
  Input: atkbd - fix hardware autorepeat
  Input: wistron - add mapping for Wistron MS 2111

Remove the hard coded ROM region setups. Use Kconfig options to specify
these in a generic way for platorms that want them.

This builds on top of the other recent m68knommu linker script changes
to completely remove fixed board configurations.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use Kconfig options to setup the optional ROM region used on some
platforms. We used to define this in the linker script on a per
board basis. The configure options are more flexible and clean up
the linker script a lot.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix 68EZ328/config.c asm to be clean for new gcc versions.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix 68VZ328/config.c asm to be clean for new gcc versions.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix 68360/config.c asm to be clean for new gcc versions.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The irqnode_t struct has moved to irqnode.h, need to include that
68360 ints.c.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix clobber list in uCsimm/uCdimm boot load helper asm.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Conditionaly compile the 68328 romvec code based on the ROM configuration
being enabled.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove the inline 68328 romvec section asm code into its own file.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Clean out the 68328serial driver:

. remove use of cli/sti
. fix usage of tty_* calls
. remove unused variables
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Create the 68328 romvec section in its own assembler file. It can be
compiled in when required.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64-SGI] fix prom revision checks in SN kernel
  [IA64] tiger_defconfig s/NR_CPUS=4/NR_CPUS=16/
  [IA64-SGI] - Pass OS logical cpu number to the SN prom (bios)
  [IA64] palinfo.c: s/register_cpu_notifier/register_hotcpu_notifier/

WARNING: "unset_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined!
WARNING: "set_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined!

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Also sets the new fifo flag so that we don't hang on some errors with this
chipset.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move auto arrays to static (const).  Clean up using PCI_DEVICE in places,
remove unreachable junk and dead code.

Fix the serverworks cable detect logic (if ordering is wrong).  Backport
from libata.  Plenty of scope for more cleanup left.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>