- 25 Jun, 2015 40 commits
-
-
Catalin Marinas authored
The kmemleak memory scanning uses finer grained object->lock spinlocks primarily to avoid races with the memory block freeing. However, the pointer lookup in the rb tree requires the kmemleak_lock to be held. This is currently done in the find_and_get_object() function for each pointer-like location read during scanning. While this allows a low latency on kmemleak_*() callbacks on other CPUs, the memory scanning is slower. This patch moves the kmemleak_lock outside the scan_block() loop, acquiring/releasing it only once per scanned memory block. The allow_resched logic is moved outside scan_block() and a new scan_large_block() function is implemented which splits large blocks in MAX_SCAN_SIZE chunks with cond_resched() calls in-between. A redundant (object->flags & OBJECT_NO_SCAN) check is also removed from scan_object(). With this patch, the kmemleak scanning performance is significantly improved: at least 50% with lock debugging disabled and over an order of magnitude with lock proving enabled (on an arm64 system). Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Catalin Marinas authored
While very unlikely (usually kmemleak or sl*b bug), the create_object() function in mm/kmemleak.c may fail to insert a newly allocated object into the rb tree. When this happens, kmemleak disables itself and prints additional information about the object already found in the rb tree. Such printing is done with the parent->lock acquired, however the kmemleak_lock is already held. This is a potential race with the scanning thread which acquires object->lock and kmemleak_lock in a This patch removes the locking around the 'parent' object information printing. Such object cannot be freed or removed from object_tree_root and object_list since kmemleak_lock is already held. There is a very small risk that some of the object data is being modified on another CPU but the only downside is inconsistent information printing. Signed-off-by:
-
Catalin Marinas authored
The kmemleak_do_cleanup() work thread already waits for the kmemleak_scan thread to finish via kthread_stop(). Waiting in kthread_stop() while scan_mutex is held may lead to deadlock if kmemleak_scan_thread() also waits to acquire for scan_mutex. Signed-off-by:
-
Catalin Marinas authored
Calling delete_object_*() on the same pointer is not a standard use case (unless there is a bug in the code calling kmemleak_free()). However, during kmemleak disabling (error or user triggered via /sys), there is a potential race between kmemleak_free() calls on a CPU and __kmemleak_do_cleanup() on a different CPU. The current delete_object_*() implementation first performs a look-up holding kmemleak_lock, increments the object->use_count and then re-acquires kmemleak_lock to remove the object from object_tree_root and object_list. This patch simplifies the delete_object_*() mechanism to both look up and remove an object from the object_tree_root and object_list atomically (guarded by kmemleak_lock). This allows safe concurrent calls to delete_object_*() on the same pointer without additional locking for synchronising the kmemleak_free_enabled flag. A side effect is a slight improvement in the delete_object_*() performance by avoiding acquiring kmemleak_lock twice and incrementing/decrementing object->use_count. Signed-off-by:
-
Catalin Marinas authored
The kmemleak scanning thread can run for minutes. Callbacks like kmemleak_free() are allowed during this time, the race being taken care of by the object->lock spinlock. Such lock also prevents a memory block from being freed or unmapped while it is being scanned by blocking the kmemleak_free() -> ... -> __delete_object() function until the lock is released in scan_object(). When a kmemleak error occurs (e.g. it fails to allocate its metadata), kmemleak_enabled is set and __delete_object() is no longer called on freed objects. If kmemleak_scan is running at the same time, kmemleak_free() no longer waits for the object scanning to complete, allowing the corresponding memory block to be freed or unmapped (in the case of vfree()). This leads to kmemleak_scan potentially triggering a page fault. This patch separates the kmemleak_free() enabling/disabling from the overall kmemleak_enabled nob so that we can defer the disabling of the object freeing tracking until the scanning thread completed. The kmemleak_free_part() is deliberately ignored by this patch since this is only called during boot before the scanning thread started. Signed-off-by:
Vignesh Radhakrishnan <vigneshr@codeaurora.org> Tested-by:
-
Tejun Heo authored
memcg->under_oom tracks whether the memcg is under OOM conditions and is an atomic_t counter managed with mem_cgroup_[un]mark_under_oom(). While atomic_t appears to be simple synchronization-wise, when used as a synchronization construct like here, it's trickier and more error-prone due to weak memory ordering rules, especially around atomic_read(), and false sense of security. For example, both non-trivial read sites of memcg->under_oom are a bit problematic although not being actually broken. * mem_cgroup_oom_register_event() It isn't explicit what guarantees the memory ordering between event addition and memcg->under_oom check. This isn't broken only because memcg_oom_lock is used for both event list and memcg->oom_lock. * memcg_oom_recover() The lockless test doesn't have any explanation why this would be safe. mem_cgroup_[un]mark_under_oom() are very cold paths and there's no point in avoiding locking memcg_oom_lock there. This patch converts memcg->under_oom from atomic_t to int, puts their modifications under memcg_oom_lock and documents why the lockless test in memcg_oom_recover() is safe. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Tejun Heo authored
Since commit 49426420 ("mm: memcg: handle non-error OOM situations more gracefully"), nobody uses mem_cgroup->oom_wakeups. Remove it. While at it, also fold memcg_wakeup_oom() into memcg_oom_recover() which is its only user. This cleanup was suggested by Michal. Signed-off-by:
-
Dan Streetman authored
Change frontswap single pointer to a singly linked list of frontswap implementations. Update Xen tmem implementation as register no longer returns anything. Frontswap only keeps track of a single implementation; any implementation that registers second (or later) will replace the previously registered implementation, and gets a pointer to the previous implementation that the new implementation is expected to pass all frontswap functions to if it can't handle the function itself. However that method doesn't really make much sense, as passing that work on to every implementation adds unnecessary work to implementations; instead, frontswap should simply keep a list of all registered implementations and try each implementation for any function. Most importantly, neither of the two currently existing frontswap implementations in the kernel actually do anything with any previous frontswap implementation that they replace when registering. This allows frontswap to successfully manage multiple implementations by keeping a list of them all. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Tony Luck authored
UEFI GetMemoryMap() uses a new attribute bit to mark mirrored memory address ranges. See UEFI 2.5 spec pages 157-158: http://www.uefi.org/sites/default/files/resources/UEFI%202_5.pdf On EFI enabled systems scan the memory map and tell memblock about any mirrored ranges. Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by:
-
Tony Luck authored
Try to allocate all boot time kernel data structures from mirrored memory. If we run out of mirrored memory print warnings, but fall back to using non-mirrored memory to make sure that we still boot. By number of bytes, most of what we allocate at boot time is the page structures. 64 bytes per 4K page on x86_64 ... or about 1.5% of total system memory. For workloads where the bulk of memory is allocated to applications this may represent a useful improvement to system availability since 1.5% of total memory might be a third of the memory allocated to the kernel. Signed-off-by:
-
Tony Luck authored
Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: -
Michal Hocko authored
page_cache_read, do_generic_file_read, __generic_file_splice_read and __ntfs_grab_cache_pages currently ignore mapping_gfp_mask when calling add_to_page_cache_lru which might cause recursion into fs down in the direct reclaim path if the mapping really relies on GFP_NOFS semantic. This doesn't seem to be the case now because page_cache_read (page fault path) doesn't seem to suffer from the reclaim recursion issues and do_generic_file_read and __generic_file_splice_read also shouldn't be called under fs locks which would deadlock in the reclaim path. Anyway it is better to obey mapping gfp mask and prevent from later breakage. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Shailendra Verma authored
Signed-off-by:
Shailendra Verma <shailendra.capricorn@gmail.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Wang Long authored
In oom_kill_process(), the variable 'points' is unsigned int. Print it as such. Signed-off-by:
Wang Long <long.wanglong@huawei.com> Acked-by:
-
Mike Kravetz authored
alloc_huge_page and hugetlb_reserve_pages use region_chg to calculate the number of pages which will be added to the reserve map. Subpool and global reserve counts are adjusted based on the output of region_chg. Before the pages are actually added to the reserve map, these routines could race and add fewer pages than expected. If this happens, the subpool and global reserve counts are not correct. Compare the number of pages actually added (region_add) to those expected to added (region_chg). If fewer pages are actually added, this indicates a race and adjust counters accordingly. Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
-
Mike Kravetz authored
Modify region_add() to keep track of regions(pages) added to the reserve map and return this value. The return value can be compared to the return value of region_chg() to determine if the map was modified between calls. Make vma_commit_reservation() also pass along the return value of region_add(). In the normal case, we want vma_commit_reservation to return the same value as the preceding call to vma_needs_reservation. Create a common __vma_reservation_common routine to help keep the special case return values in sync Signed-off-by:
-
Mike Kravetz authored
While working on hugetlbfs fallocate support, I noticed the following race in the existing code. It is unlikely that this race is hit very often in the current code. However, if more functionality to add and remove pages to hugetlbfs mappings (such as fallocate) is added the likelihood of hitting this race will increase. alloc_huge_page and hugetlb_reserve_pages use information from the reserve map to determine if there are enough available huge pages to complete the operation, as well as adjust global reserve and subpool usage counts. The order of operations is as follows: - call region_chg() to determine the expected change based on reserve map - determine if enough resources are available for this operation - adjust global counts based on the expected change - call region_add() to update the reserve map The issue is that reserve map could change between the call to region_chg and region_add. In this case, the counters which were adjusted based on the output of region_chg will not be correct. In order to hit this race today, there must be an existing shared hugetlb mmap created with the MAP_NORESERVE flag. A page fault to allocate a huge page via this mapping must occur at the same another task is mapping the same region without the MAP_NORESERVE flag. The patch set does not prevent the race from happening. Rather, it adds simple functionality to detect when the race has occurred. If a race is detected, then the incorrect counts are adjusted. Review comments pointed out the need for documentation of the existing region/reserve map routines. This patch set also adds documentation in this area. This patch (of 3): This is a documentation only patch and does not modify any code. Descriptions of the routines used for reserve map/region tracking are added. Signed-off-by:
-
Michal Hocko authored
There is a very subtle difference between mmap()+mlock() vs mmap(MAP_LOCKED) semantic. The former one fails if the population of the area fails while the later one doesn't. This basically means that mmap(MAPLOCKED) areas might see major fault after mmap syscall returns which is not the case for mlock. mmap man page has already been altered but Documentation/vm/unevictable-lru.txt deserves a clarification as well. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Leon Romanovsky authored
kenter/kleave/kdebug are wrapper macros to print functions flow and debug information. This set was written before pr_devel() was introduced, so it was controlled by "#if 0" construction. It is questionable if anyone is using them [1] now. This patch removes these macros, converts numerous printk(KERN_WARNING, ...) to use general pr_warn(...) and removes debug print line from validate_mmap_request() function. Signed-off-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
-
Aneesh Kumar K.V authored
We have confusing functions to clear pmd, pmd_clear_* and pmd_clear. Add _huge_ to pmdp_clear functions so that we are clear that they operate on hugepage pte. We don't bother about other functions like pmdp_set_wrprotect, pmdp_clear_flush_young, because they operate on PTE bits and hence indicate they are operating on hugepage ptes Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Also move the pmd_trans_huge check to generic code. Signed-off-by:
-
Aneesh Kumar K.V authored
Architectures like ppc64 [1] need to do special things while clearing pmd before a collapse. For them this operation is largely different from a normal hugepage pte clear. Hence add a separate function to clear pmd before collapse. After this patch pmdp_* functions operate only on hugepage pte, and not on regular pmd_t values pointing to page table. [1] ppc64 needs to invalidate all the normal page pte mappings we already have inserted in the hardware hash page table. But before doing that we need to make sure there are no parallel hash page table insert going on. So we need to do a kick_all_cpus_sync() before flushing the older hash table entries. By moving this to a separate function we capture these details and mention how it is different from a hugepage pte clear. This patch is a cleanup and only does code movement for clarity. There should not be any change in functionality. Signed-off-by:
-
Xie XiuQi authored
RAS user space tools like rasdaemon which base on trace event, could receive mce error event, but no memory recovery result event. So, I want to add this event to make this scenario complete. This patch add a event at ras group for memory-failure. The output like below: # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:24 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | mce-inject-13150 [001] .... 277.019359: memory_failure_event: pfn 0x19869: recovery action for free buddy page: Delayed [xiexiuqi@huawei.com: fix build error] Signed-off-by:Xie XiuQi <xiexiuqi@huawei.com> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jim Davis <jim.epost@gmail.com> Signed-off-by:
-
Xie XiuQi authored
Change type of action_result's param 3 to enum for type consistency, and rename mf_outcome to mf_result for clearly. Signed-off-by:
-
Xie XiuQi authored
Export 'outcome' and 'action_page_type' to mm.h, so we could use this emnus outside. This patch is preparation for adding trace events for memory-failure recovery action. Signed-off-by:
-
Mel Gorman authored
Historically memcg overhead was high even if memcg was unused. This has improved a lot but it still showed up in a profile summary as being a problem. /usr/src/linux-4.0-vanilla/mm/memcontrol.c 6.6441 395842 mem_cgroup_try_charge 2.950% 175781 __mem_cgroup_count_vm_event 1.431% 85239 mem_cgroup_page_lruvec 0.456% 27156 mem_cgroup_commit_charge 0.392% 23342 uncharge_list 0.323% 19256 mem_cgroup_update_lru_size 0.278% 16538 memcg_check_events 0.216% 12858 mem_cgroup_charge_statistics.isra.22 0.188% 11172 try_charge 0.150% 8928 commit_charge 0.141% 8388 get_mem_cgroup_from_mm 0.121% 7184 That is showing that 6.64% of system CPU cycles were in memcontrol.c and dominated by mem_cgroup_try_charge. The annotation shows that the bulk of the cost was checking PageSwapCache which is expected to be cache hot but is very expensive. The problem appears to be that __SetPageUptodate is called just before the check which is a write barrier. It is required to make sure struct page and page data is written before the PTE is updated and the data visible to userspace. memcg charging does not require or need the barrier but gets unfairly hit with the cost so this patch attempts the charging before the barrier. Aside from the accidental cost to memcg there is the added benefit that the barrier is avoided if the page cannot be charged. When applied the relevant profile summary is as follows. /usr/src/linux-4.0-chargefirst-v2r1/mm/memcontrol.c 3.7907 223277 __mem_cgroup_count_vm_event 1.143% 67312 mem_cgroup_page_lruvec 0.465% 27403 mem_cgroup_commit_charge 0.381% 22452 uncharge_list 0.332% 19543 mem_cgroup_update_lru_size 0.284% 16704 get_mem_cgroup_from_mm 0.271% 15952 mem_cgroup_try_charge 0.237% 13982 memcg_check_events 0.222% 13058 mem_cgroup_charge_statistics.isra.22 0.185% 10920 commit_charge 0.140% 8235 try_charge 0.131% 7716 That brings the overhead down to 3.79% and leaves the memcg fault accounting to the root cgroup but it's an improvement. The difference in headline performance of the page fault microbench is marginal as memcg is such a small component of it. pft faults 4.0.0 4.0.0 vanilla chargefirst Hmean faults/cpu-1 1443258.1051 ( 0.00%) 1509075.7561 ( 4.56%) Hmean faults/cpu-3 1340385.9270 ( 0.00%) 1339160.7113 ( -0.09%) Hmean faults/cpu-5 875599.0222 ( 0.00%) 874174.1255 ( -0.16%) Hmean faults/cpu-7 601146.6726 ( 0.00%) 601370.9977 ( 0.04%) Hmean faults/cpu-8 510728.2754 ( 0.00%) 510598.8214 ( -0.03%) Hmean faults/sec-1 1432084.7845 ( 0.00%) 1497935.5274 ( 4.60%) Hmean faults/sec-3 3943818.1437 ( 0.00%) 3941920.1520 ( -0.05%) Hmean faults/sec-5 3877573.5867 ( 0.00%) 3869385.7553 ( -0.21%) Hmean faults/sec-7 3991832.0418 ( 0.00%) 3992181.4189 ( 0.01%) Hmean faults/sec-8 3987189.8167 ( 0.00%) 3986452.2204 ( -0.02%) It's only visible at single threaded. The overhead is there for higher threads but other factors dominate. Signed-off-by:Mel Gorman <mgorman@suse.de> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Michal Hocko authored
hugetlb pages uses add_to_page_cache to track shared mappings. This is OK from the data structure point of view but it is less so from the NR_FILE_PAGES accounting: - huge pages are accounted as 4k which is clearly wrong - this counter is used as the amount of the reclaimable page cache which is incorrect as well because hugetlb pages are special and not reclaimable - the counter is then exported to userspace via /proc/meminfo (in Cached:), /proc/vmstat and /proc/zoneinfo as nr_file_pages which is confusing at least: Cached: 8883504 kB HugePages_Free: 8348 ... Cached: 8916048 kB HugePages_Free: 156 ... thats 8192 huge pages allocated which is ~16G accounted as 32M There are usually not that many huge pages in the system for this to make any visible difference e.g. by fooling __vm_enough_memory or zone_pagecache_reclaimable. Fix this by special casing huge pages in both __delete_from_page_cache and __add_to_page_cache_locked. replace_page_cache_page is currently only used by fuse and that shouldn't touch hugetlb pages AFAICS but it is more robust to check for special casing there as well. Hugetlb pages shouldn't get to any other paths where we do accounting: - migration - we have a special handling via hugetlbfs_migrate_page - shmem - doesn't handle hugetlb pages directly even for SHM_HUGETLB resp. MAP_HUGETLB - swapcache - hugetlb is not swapable This has a user visible effect but I believe it is reasonable because the previously exported number is simply bogus. An alternative would be to account hugetlb pages with their real size and treat them similar to shmem. But this has some drawbacks. First we would have to special case in kernel users of NR_FILE_PAGES and considering how hugetlb is special we would have to do it everywhere. We do not want Cached exported by /proc/meminfo to include it because the value would be even more misleading. __vm_enough_memory and zone_pagecache_reclaimable would have to do the same thing because those pages are simply not reclaimable. The correction is even not trivial because we would have to consider all active hugetlb page sizes properly. Users of the counter outside of the kernel would have to do the same. So the question is why to account something that needs to be basically excluded for each reasonable usage. This doesn't make much sense to me. It seems that this has been broken since hugetlb was introduced but I haven't checked the whole history. [akpm@linux-foundation.org: tweak comments] Signed-off-by:
-
Johannes Weiner authored
The should_alloc_retry() function was meant to encapsulate retry conditions of the allocator slowpath, but there are still checks remaining in the main function, and much of how the retrying is performed also depends on the OOM killer progress. The physical separation of those conditions make the code hard to follow. Inline the should_alloc_retry() checks. Notes: - The __GFP_NOFAIL check is already done in __alloc_pages_may_oom(), replace it with looping on OOM killer progress - The pm_suspended_storage() check is meant to skip the OOM killer when reclaim has no IO available, move to __alloc_pages_may_oom() - The order <= PAGE_ALLOC_COSTLY order is re-united with its original counterpart of checking whether reclaim actually made any progress Signed-off-by:
-
Johannes Weiner authored
The zonelist locking and the oom_sem are two overlapping locks that are used to serialize global OOM killing against different things. The historical zonelist locking serializes OOM kills from allocations with overlapping zonelists against each other to prevent killing more tasks than necessary in the same memory domain. Only when neither tasklists nor zonelists from two concurrent OOM kills overlap (tasks in separate memcgs bound to separate nodes) are OOM kills allowed to execute in parallel. The younger oom_sem is a read-write lock to serialize OOM killing against the PM code trying to disable the OOM killer altogether. However, the OOM killer is a fairly cold error path, there is really no reason to optimize for highly performant and concurrent OOM kills. And the oom_sem is just flat-out redundant. Replace both locking schemes with a single global mutex serializing OOM kills regardless of context. Signed-off-by:
-
Johannes Weiner authored
Disabling the OOM killer needs to exclude allocators from entering, not existing victims from exiting. Right now the only waiter is suspend code, which achieves quiescence by disabling the OOM killer. But later on we want to add waits that hold the lock instead to stop new victims from showing up. Signed-off-by:
-
Johannes Weiner authored
It turns out that the mechanism to wait for exiting OOM victims is less generic than it looks: it won't issue wakeups unless the OOM killer is disabled. The reason this check was added was the thought that, since only the OOM disabling code would wait on this queue, wakeup operations could be saved when that specific consumer is known to be absent. However, this is quite the handgrenade. Later attempts to reuse the waitqueue for other purposes will lead to completely unexpected bugs and the failure mode will appear seemingly illogical. Generally, providers shouldn't make unnecessary assumptions about consumers. This could have been replaced with waitqueue_active(), but it only saves a few instructions in one of the coldest paths in the kernel. Simply remove it. Signed-off-by:
-
Johannes Weiner authored
exit_oom_victim() already knows that TIF_MEMDIE is set, and nobody else can clear it concurrently. Use clear_thread_flag() directly. Signed-off-by:
-
Johannes Weiner authored
Rename unmark_oom_victim() to exit_oom_victim(). Marking and unmarking are related in functionality, but the interface is not symmetrical at all: one is an internal OOM killer function used during the killing, the other is for an OOM victim to signal its own death on exit later on. This has locking implications, see follow-up changes. While at it, rename mark_tsk_oom_victim() to mark_oom_victim(), which is easier on the eye. Signed-off-by:
-
Johannes Weiner authored
Setting oom_killer_disabled to false is atomic, there is no need for further synchronization with ongoing allocations trying to OOM-kill. Signed-off-by:
-
Gu Zheng authored
Init the zone's size when calculating node totalpages to avoid duplicated operations in free_area_init_core(). Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
-
Naoya Horiguchi authored
Currently the initial value of order in dissolve_free_huge_page is 64 or 32, which leads to the following warning in static checker: mm/hugetlb.c:1203 dissolve_free_huge_pages() warn: potential right shift more than type allows '9,18,64' This is a potential risk of infinite loop, because 1 << order (== 0) is used in for-loop like this: for (pfn =3D start_pfn; pfn < end_pfn; pfn +=3D 1 << order) ... So this patch fixes it by using global minimum_order calculated at boot time. text data bss dec hex filename 28313 469 84236 113018 1b97a mm/hugetlb.o 28256 473 84236 112965 1b945 mm/hugetlb.o (patched) Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Vladimir Davydov authored
As noted by Paul the compiler is free to store a temporary result in a variable on stack, heap or global unless it is explicitly marked as volatile, see: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4455.html#sample-optimizations This can result in a race between do_wp_page() and shrink_active_list() as follows. In do_wp_page() we can call page_move_anon_rmap(), which sets page->mapping as follows: anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON; page->mapping = (struct address_space *) anon_vma; The page in question may be on an LRU list, because nowhere in do_wp_page() we remove it from the list, neither do we take any LRU related locks. Although the page is locked, shrink_active_list() can still call page_referenced() on it concurrently, because the latter does not require an anonymous page to be locked: CPU0 CPU1 ---- ---- do_wp_page shrink_active_list lock_page page_referenced PageAnon->yes, so skip trylock_page page_move_anon_rmap page->mapping = anon_vma rmap_walk PageAnon->no rmap_walk_file BUG page->mapping += PAGE_MAPPING_ANON This patch fixes this race by explicitly forbidding the compiler to split page->mapping store in page_move_anon_rmap() with the aid of WRITE_ONCE. [akpm@linux-foundation.org: tweak comment, per Minchan] Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Naoya Horiguchi authored
memory_failure() is supposed not to handle thp itself, but to split it. But if something were wrong and page_action() were called on thp, me_huge_page() (action routine for hugepages) should be better to take no action, rather than to take wrong action prepared for hugetlb (which triggers BUG_ON().) This change is for potential problems, but makes sense to me because thp is an actively developing feature and this code path can be open in the future. Signed-off-by:
-
Naoya Horiguchi authored
Stress testing showed that soft offline events for a process iterating "mmap-pagefault-munmap" loop can trigger VM_BUG_ON(PAGE_FLAGS_CHECK_AT_PREP) in __free_one_page(): Soft offlining page 0x70fe1 at 0x70100008d000 Soft offlining page 0x705fb at 0x70300008d000 page:ffffea0001c3f840 count:0 mapcount:0 mapping: (null) index:0x2 flags: 0x1fffff80800000(hwpoison) page dumped because: VM_BUG_ON_PAGE(page->flags & ((1 << 25) - 1)) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/mm/page_alloc.c:585! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: cfg80211 rfkill crc32c_intel microcode ppdev parport_pc pcspkr serio_raw virtio_balloon parport i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy CPU: 3 PID: 1779 Comm: test_base_madv_ Not tainted 4.0.0-v4.0-150511-1451-00009-g82360a3730e6 #139 RIP: free_pcppages_bulk+0x52a/0x6f0 Call Trace: drain_pages_zone+0x3d/0x50 drain_local_pages+0x1d/0x30 on_each_cpu_mask+0x46/0x80 drain_all_pages+0x14b/0x1e0 soft_offline_page+0x432/0x6e0 SyS_madvise+0x73c/0x780 system_call_fastpath+0x12/0x17 Code: ff 89 45 b4 48 8b 45 c0 48 83 b8 a8 00 00 00 00 0f 85 e3 fb ff ff 0f 1f 00 0f 0b 48 8b 7d 90 48 c7 c6 e8 95 a6 81 e8 e6 32 02 00 <0f> 0b 8b 45 cc 49 89 47 30 41 8b 47 18 83 f8 ff 0f 85 10 ff ff RIP [<ffffffff811a806a>] free_pcppages_bulk+0x52a/0x6f0 RSP <ffff88007a117d28> ---[ end trace 53926436e76d1f35 ]--- When soft offline successfully migrates page, the source page is supposed to be freed. But there is a race condition where a source page looks isolated (i.e. the refcount is 0 and the PageHWPoison is set) but somewhat linked to pcplist. Then another soft offline event calls drain_all_pages() and tries to free such hwpoisoned page, which is forbidden. This odd page state seems to happen due to the race between put_page() in putback_lru_page() and __pagevec_lru_add_fn(). But I don't want to play with tweaking drain code as done in commit 9ab3b598 "mm: hwpoison: drop lru_add_drain_all() in __soft_offline_page()", or to change page freeing code for this soft offline's purpose. Instead, let's think about the difference between hard offline and soft offline. There is an interesting difference in how to isolate the in-use page between these, that is, hard offline marks PageHWPoison of the target page at first, and doesn't free it by keeping its refcount 1. OTOH, soft offline tries to free the target page then marks PageHWPoison. This difference might be the source of complexity and result in bugs like the above. So making soft offline isolate with keeping refcount can be a solution for this problem. We can pass to page migration code the "reason" which shows the caller, so let's use this more to avoid calling putback_lru_page() when called from soft offline, which effectively does the isolation for soft offline. With this change, target pages of soft offline never be reused without changing migratetype, so this patch also removes the related code. Signed-off-by: -
Naoya Horiguchi authored
memory_failure() can run in 2 different mode (specified by MF_COUNT_INCREASED) in page refcount perspective. When MF_COUNT_INCREASED is set, memory_failure() assumes that the caller takes a refcount of the target page. And if cleared, memory_failure() takes it in it's own. In current code, however, refcounting is done differently in each caller. For example, madvise_hwpoison() uses get_user_pages_fast() and hwpoison_inject() uses get_page_unless_zero(). So this inconsistent refcounting causes refcount failure especially for thp tail pages. Typical user visible effects are like memory leak or VM_BUG_ON_PAGE(!page_count(page)) in isolate_lru_page(). To fix this refcounting issue, this patch introduces get_hwpoison_page() to handle thp tail pages in the same manner for each caller of hwpoison code. memory_failure() might fail to split thp and in such case it returns without completing page isolation. This is not good because PageHWPoison on the thp is still set and there's no easy way to unpoison such thps. So this patch try to roll back any action to the thp in "non anonymous thp" case and "thp split failed" case, expecting an MCE(SRAR) generated by later access afterward will properly free such thps. [akpm@linux-foundation.org: fix CONFIG_HWPOISON_INJECT=m] Signed-off-by:
-
