- 15 Jan, 2020 38 commits
-
-
Paul Cercueil authored
Add a /* sentinel */ comment to the sentinel entry of the devicetree ID table, and fix a multi-line comment not having its opening token on a separate line. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-16-b-liu@ti.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Cercueil authored
Name the platform_device pointer 'pdev' instead of 'musb'. Since the driver also deal with pointers to 'struct musb', it can be very confusing to have a pointer named after this struct but with a different type. Signed-off-by:
-
Paul Cercueil authored
By moving around the jz4740_musb_pdata structure, we can have the .platform_ops field initialized, so that we don't have to initialize it manually in the probe function. Therefore, the struct can be const now. Signed-off-by:
-
Paul Cercueil authored
Clean up the probe function by using a local 'struct device *dev' variable, instead of referencing &pdev->dev everytime. Signed-off-by:
-
Paul Cercueil authored
The 'dev' field was never read anywhere. Signed-off-by:
-
Tony Lindgren authored
Now that we've removed direct calls from interrupt handler to omap2430_musb_set_vbus(), let's make things less confusing and configure VBUS directly in omap_musb_set_mailbox(). We have omap_musb_set_mailbox() called from the PHYs, and that's all we need. Note that we can now also drop the check for MUSB_INTERFACE_UTMI, we've been already calling otg_set_vbus(musb->xceiv->otg, 0) unconditionally via omap2430_musb_set_vbus() and we should only need to call it once. And we want to disable VBUS unconditionally on disconnect even without musb->gadget_driver, so let's drop that check too. Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
We want to configure musb state in omap2430_musb_enable() instead of omap2430_musb_init(). Otherwise musb may not idle properly until USB cable has been connected at least once. And we already have omap_musb_set_mailbox() configure mode with omap_control_usb_set_mode() so we can remove those calls from omap2430_musb_enable(). Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by:
-
Tony Lindgren authored
There should be no need to tinker with devctl in enable in the SoC glue code. We have musb_start() to take care of handling it already. Acked-by:
-
Tony Lindgren authored
At least some revisions of musb core need to set devctl session bit in peripheral mode to force musb to host mode. And we have places clearing the devctl session bit. Let's add a generic function to do this, and use it for omap2430. This should get us a bit closer to completely removing devctl register tinkering in the SoC glue code. Before making use of this code for the other glue layers, things need to be tested carefully as there may be a approximately a 200 ms delay needed between powering up musb and calling musb_set_host() to avoid. Otherwise the system hangs at least with omap2430 glue layer. Acked-by:
-
Tony Lindgren authored
We currently get "unhandled DISCONNECT transition" warnings from musb core on device disconnect as things are wrongly set to OTG_STATE_A_IDLE in host mode when enumerating devices. We can also get "Failed to write reg index" errors after enumerating. This is happening at least with cpcap phy where we get multiple ID ground interrupts. Looks like it's VBUS keeps timing out and needs to be kicked when the phy sends multiple ID ground interrupts during host mode. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by:
-
Tony Lindgren authored
We can get babble interrupt if we attempt to switch to USB host mode too soon after enabling musb. Let's fix the issue by waiting a bit in runtime_resume. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by:
-
Tony Lindgren authored
We currently have musb_set_vbus() called from two different paths. Mostly it gets called from the USB PHY via omap_musb_set_mailbox(), but in some cases it can get also called from musb_stage0_irq() rather via .set_vbus: (musb_set_host [musb_hdrc]) (omap2430_musb_set_vbus [omap2430]) (musb_stage0_irq [musb_hdrc]) (musb_interrupt [musb_hdrc]) (omap2430_musb_interrupt [omap2430]) This is racy and will not work with introducing generic helper functions for musb_set_host() and musb_set_peripheral(). We want to get rid of the busy loops in favor of usleep_range(). Let's just get rid of .set_vbus for omap2430 glue layer and let the PHY code handle VBUS with musb_set_vbus(). Note that in the follow-up patch we can completely remove omap2430_musb_set_vbus(), but let's do it in a separate patch as this change may actually turn out to be needed as a fix. Reported-by:
-
Paul Cercueil authored
The driver does not depend directly on the NOP transceiver. It can compile and work just fine without it. Signed-off-by:
-
Mans Rullgard authored
In order for devicetree nodes to be correctly associated with attached devices, the controller node needs to be propagated to the glue device. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Saurav Girepunje authored
Update the function description of musb_stage0_irq() to remove unused parameter. Signed-off-by:
Saurav Girepunje <saurav.girepunje@gmail.com> [b-liu@ti.com: revised commit log] Signed-off-by:
-
Lukas Wunner authored
The original dwc_otg driver used a DWC_WORKQ_SCHEDULE() wrapper to queue work items. Because that wrapper acquired the driver's global spinlock, an unlock/lock dance was necessary whenever a work item was queued up while the global spinlock was already held. The dwc2 driver dropped DWC_WORKQ_SCHEDULE() in favor of a direct call to queue_work(), but retained the (now gratuitous) unlock/lock dance in dwc2_handle_conn_id_status_change_intr(). Drop it. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Acked-by:
Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/77c07f00a6a9d94323c4a060a3c72817b0703b97.1574244795.git.lukas@wunner.deSigned-off-by:
-
Bryan O'Donoghue authored
Currently ecm->notify_req is used to flag when a request is in-flight. ecm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the ECM driver will unconditionally free ecm->notify_req leading to a NULL pointer dereference. Fixes: da741b8c ("usb ethernet gadget: split CDC Ethernet function") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Bryan O'Donoghue authored
Currently ncm->notify_req is used to flag when a request is in-flight. ncm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the NCM driver will unconditionally free ncm->notify_req leading to a NULL pointer dereference. Fixes: 40d133d7 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
We had a 100us delay to synchronize the END_TRANSFER command completion before giving back requests to the function drivers. Now, the controller driver can handle cancelled TRBs with the requests' cancelled_list and it can also wait until the END_TRANSFER completion before starting new transfers. Synchronization can simply base on the controller's command completion interrupt. The 100us delay is no longer needed. Remove this arbitrary delay. Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Thinh Nguyen authored
If the END_TRANSFER command hasn't completed yet, then don't send the START_TRANSFER command. The controller may not be able to start if that's the case. Some controller revisions depend on this. See commit 76a638f8 ("usb: dwc3: gadget: wait for End Transfer to complete"). Let's only send START_TRANSFER command after the END_TRANSFER command had completed. Fixes: 3aec9915 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING") Signed-off-by:
-
Thinh Nguyen authored
While the END_TRANSFER command is sent but not completed, any request dequeue during this time will cause the driver to issue the END_TRANSFER command. The driver needs to submit the command only once to stop the controller from processing further. The controller may take more time to process the same command multiple times unnecessarily. Let's add a flag DWC3_EP_END_TRANSFER_PENDING to check for this condition. Fixes: 3aec9915 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING") Signed-off-by:
-
John Keeping authored
The packet size for USB audio must always be a multiple of the frame size, otherwise we are transmitting a partial frame which omits some channels (and these end up at the wrong offset in the next packet). Furthermore, it breaks the residue handling such that we end up trying to send a packet exceeding the maximum packet size for the endpoint. Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Peter Chen authored
There is a Cadence USB3 core for imx8qm and imx8qxp SoCs, the cdns core is the child for this glue layer device. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Bin Liu authored
VBUS should be turned off when leaving the host mode. Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to turn off VBUS power. Fixes: 5f94adfe ("usb: dwc3: core: refactor mode initialization to its own function") Cc: stable@vger.kernel.org Signed-off-by:
-
Jayshri Pawar authored
This patch includes streams implementation changes. The current changes has been validated on FPGA platform. Enabled streams related interrupts only for streams capable endpoints. Processed PRIME and IOT interrupts related to streams capable endpoints. Based on PRIME interrupt prime_flag is set and transfer is armed otherwise just adding request to the deferred request queue. For streams capable endpoints preparing TD with correct stream ID. TDL calculation: Updated tdl calculation based on controller versions. 1. For controller version DEV_VER_V2 :We have enabled USB_CONF2_EN_TDL_TRB bit in usb_conf2 register in DMULT configuration. This enables TDL calculation based on TRB, hence setting TDL in TRB. 2. For controller Version < DEV_VER_V2 : Writing TDL and STDL in ep_cmd register 3. For controller version > DEV_VER_V2 : Writing TDL in ep_tdl register. Writing ERDY with correct Stream ID to ep_cmd register. Added stream id related information to trace logs. Signed-off-by:
Rahul Kumar <kurahul@cadence.com> Signed-off-by:
Pawel Laszczak <pawell@cadence.com> Signed-off-by:
Jayshri Pawar <jpawar@cadence.com> Signed-off-by:
-
Jia-Ju Bai authored
The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: drivers/usb/gadget/udc/core.c, 1175: kzalloc(GFP_KERNEL) in usb_add_gadget_udc_release drivers/usb/gadget/udc/core.c, 1272: usb_add_gadget_udc_release in usb_add_gadget_udc drivers/usb/gadget/udc/gr_udc.c, 2186: usb_add_gadget_udc in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe drivers/usb/gadget/udc/core.c, 1195: mutex_lock in usb_add_gadget_udc_release drivers/usb/gadget/udc/core.c, 1272: usb_add_gadget_udc_release in usb_add_gadget_udc drivers/usb/gadget/udc/gr_udc.c, 2186: usb_add_gadget_udc in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe drivers/usb/gadget/udc/gr_udc.c, 212: debugfs_create_file in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2197: gr_dfs_create in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2114: devm_request_threaded_irq in gr_request_irq drivers/usb/gadget/udc/gr_udc.c, 2202: gr_request_irq in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe kzalloc(GFP_KERNEL), mutex_lock(), debugfs_create_file() and devm_request_threaded_irq() can sleep at runtime. To fix these possible bugs, usb_add_gadget_udc(), gr_dfs_create() and gr_request_irq() are called without handling the spinlock. These bugs are found by a static analysis tool STCheck written by myself. Signed-off-by:Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Peter Chen authored
The UDC core uses req->num_sgs to judge if scatter buffer list is used. Eg: usb_gadget_map_request_by_dev. For f_fs sync io mode, the request is re-used for each request, so if the 1st request->length > PAGE_SIZE, and the 2nd request->length is <= PAGE_SIZE, the f_fs uses the 1st req->num_sgs for the 2nd request, it causes the UDC core get the wrong req->num_sgs value (The 2nd request doesn't use sg). For f_fs async io mode, it is not harm to initialize req->num_sgs as 0 either, in case, the UDC driver doesn't zeroed request structure. Cc: Jun Li <jun.li@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 772a7a72 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by:
-
Thinh Nguyen authored
Some functions support speeds other than SuperSpeed. Add max_speed attribute to configfs gadget allowing user to specify the maximum speed the composite driver supports. The valid input speed names are super-speed-plus, super-speed, high-speed, full-speed, and low-speed. Signed-off-by:
-
Dejin Zheng authored
If we do not warn here, the user may not know failed to find udc device by a gadget driver with the same name because it silently fails. Let's print a warning in that case so developers find these problems faster. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
-
Roger Quadros authored
These interfaces do support super-speed so let's not limit maximum speed to high-speed. Cc: <stable@vger.kernel.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
John Keeping authored
The number of FIFOs may be lower than the number of endpoints. Use the correct total when printing FIFO details in debugfs. Acked-by:
-
John Keeping authored
On chips with fewer FIFOs than endpoints (for example RK3288 which has 9 endpoints, but only 6 which are cabable of input), the DPTXFSIZN registers above the FIFO count may return invalid values. With logging added on startup, I see: dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0 but: # cat /sys/kernel/debug/ff580000.usb/fifo Non-periodic FIFOs: RXFIFO: Size 275 NPTXFIFO: Size 16, Start 0x00000113 Periodic TXFIFOs: DPTXFIFO 1: Size 256, Start 0x00000123 DPTXFIFO 2: Size 128, Start 0x00000223 DPTXFIFO 3: Size 128, Start 0x000002a3 DPTXFIFO 4: Size 64, Start 0x00000323 DPTXFIFO 5: Size 64, Start 0x00000363 DPTXFIFO 6: Size 32, Start 0x000003a3 DPTXFIFO 7: Size 0, Start 0x000003e3 DPTXFIFO 8: Size 0, Start 0x000003a3 DPTXFIFO 9: Size 256, Start 0x00000123 so it seems that FIFO 9 is mirroring FIFO 1. Fix the allocation by using the FIFO count instead of the endpoint count when selecting a FIFO for an endpoint. Acked-by:
-
Linus Walleij authored
The last user of the phy generic platform data was deleted in commit 1e041b6f ("usb: dwc3: exynos: Remove dead code"). So get rid of the platform data, which rids us of another consumer of the legacy GPIO API at the same time. Make sure we only inlcude <linux/gpio/consumer.h> which is all we use. Alter the usb_phy_gen_create_phy() function prototype to not pass any platform data as this is just hardcoded to NULL at all locations calling it in the kernel. Move the devm_gpiod_get* calls out of the if (of_node) parenthesis, as these calls are generic and do not depend on device tree, they are used by any hardware description. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Alexandru M Stan authored
When a usb device disconnects in a certain way, dwc2_queue_transaction still gets called after dwc2_hcd_cleanup_channels. dwc2_hcd_cleanup_channels does "channel->qh = NULL;" but dwc2_queue_transaction still wants to dereference qh. This adds a check for a null qh. Acked-by:
Alexandru M Stan <amstan@chromium.org> [dianders: rebased to mainline] Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Minas Harutyunyan authored
Stalling a Non-Isochronous OUT Endpoint flow changed according programming guide. In dwc2_hsotg_ep_sethalt() function for OUT EP should not be set STALL bit. Instead should set SGOUTNAK in DCTL register. Set STALL bit should be set only after GOUTNAKEFF interrupt asserted. Signed-off-by:
-
Thinh Nguyen authored
Send a no-action link state change request before the actual request so DWC3 can send the same request whenever we call dwc3_gadget_set_link_state(). Signed-off-by:
-
Thinh Nguyen authored
When DWC3 receives disconnect event, it needs to set the link state to RX_Detect. DWC_usb3 3.30a programming guide 4.1.7 Signed-off-by:
-
Thinh Nguyen authored
DCTL.ULSTCHNGREQ is a write-only field. When doing a read-modify-write to DCTL, the driver must make sure that there's no unintended link state change request from whatever is read from DCTL.ULSTCHNGREQ. Set link state change to no-action when the driver writes to DCTL. Signed-off-by:
-
- 14 Jan, 2020 1 commit
-
-
Colin Ian King authored
In the case where the call tb_switch_exceeds_max_depth is true the error reurn path leaks memory in sw. Fix this by setting the return error code to -EADDRNOTAVAIL and returning via the error exit path err_free_sw_ports to free sw. sw has been kzalloc'd so the free of the NULL sw->ports is fine. Addresses-Coverity: ("Resource leak") Fixes: b0407983 ("thunderbolt: Add initial support for USB4") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191220220526.11307-1-colin.king@canonical.comSigned-off-by:
-
- 13 Jan, 2020 1 commit
-
-
Greg Kroah-Hartman authored
We need the USB fixes in here as well. Signed-off-by:
-
