- 12 Mar, 2009 40 commits
-
-
Martin Peschke authored
Provide measurement data for the utilisation of the QDIO outbound queue. The additional value allows to calculate an average queue utilisation by looking at the deltas per time unit. Needed for capacity planning. It is up to user space to handle wrap-arounds of the 64 bit value. The new counter neatly complements the existing counter for queue full conditions. That is why, both statistics counter have been integrated. Signed-off-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Christof Schmitt authored
Use the device pointer in zfcp_unit for tracking if we have a registered SCSI device. With this approach, the flag ZFCP_STATUS_UNIT_REGISTERED is only redundant and can be removed. Acked-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
PORT_PHYS_CLOSING is only set and cleared, but not actually used for status checking. PORT_INVALID_WWPN is set when the GID_PN request does not return a d_id for a remote port, e.g. when a remote port has been unplugged. For this case, the d_id is zero. In the erp we can check the d_id and use the normal escalation procedure that gives up after three retries and remove the special case. PORT_NO_WWPN is unused: Each port in the remote port list has a valid wwpn. The WKA ports are now tracked outside the port list. Remove the PORT_NO_WWPN flag, since this is no longer set for any port. Acked-by:
-
Alan Stern authored
The SCSI core calls scsi_proc_hostdir_add() from within scsi_host_alloc(), but the corresponding scsi_proc_hostdir_rm() routine is called from within scsi_remove_host(). As a result, if a host is allocated and then deallocated without ever being registered, the host's directory in /proc is leaked. This patch (as1181b) fixes this bug in the SCSI core by moving scsi_proc_hostdir_rm() into scsi_host_dev_release(). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Tony Battersby authored
sym53c8xx prints a negotiation message after every check condition. This can add up to a lot of messages for removable-medium devices (CD-ROM, tape drives, etc.) that are being polled, since they return check condition when no medium is present. This patch suppresses the negotiation message if it would be the same as the last one printed. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
Tony Battersby authored
sym53c8xx uses a command queue depth of 2 for untagged devices, without good reason. This _mostly_ seems to work ok, but it has caused me some subtle problems. For example, I have an application where one thread sends write commands to a tape drive, and another thread sends log sense polling commands. With a queue depth of 2, the polling commands end up being starved for long periods of time while multiple write commands are serviced (this may also be related to the fact the the sg driver queues commands in LIFO order). This problem is fixed by changing the queue depth to 1 for untagged devices. I have tested this change extensively with many different tape drives, medium changers, and disk drives (disk drives of course use tagged commands and are therefore unaffected by this patch). Signed-off-by:
-
Tony Battersby authored
sym_init_device() doesn't check if pci_iomap() fails. It also tries to map device RAM without first checking FE_RAM. 1) Move some initialization from sym_init_device() to the top of sym2_probe(). 2) Rename sym_init_device() to sym_iomap_device(). 3) Call sym_iomap_device() after sym_check_supported() instead of before so that device->chip.features will be set. 4) Check FE_RAM in sym_iomap_device() before mapping RAM. 5) If sym_iomap_device() cannot map registers, then abort. 6) If sym_iomap_device() cannot map RAM, then fall back to not using RAM and continue. 7) Remove the check for FE_RAM in sym_attach() since dev->ram_base is now always set correctly. Signed-off-by:
-
Tony Battersby authored
During sym2_probe(), sym_init_device() does pci_iomap(), but there is no corresponding pci_iounmap() if an error occurs before sym_attach() copies sym_device::s.{ioaddr,ramaddr} to np. 1) Add the sym_iounmap_device() function. 2) Call sym_iounmap_device() if an error occurs between sym_init_device() and the time sym_attach() allocates np. 3) Make sym_attach() copy sym_device::s.{ioaddr,ramaddr} to np before calling any function that can fail so that sym_free_resources() will do the unmap instead of sym_iounmap_device(). Also fixed by this patch: During sym2_probe(), if sym_check_raid() returns nonzero, then pci_release_regions() is never called. Signed-off-by: -
Tony Battersby authored
If sym_attach() gets an error at or before request_irq(), then sym_free_resources() will call free_irq() for an unregistered interrupt handler. Signed-off-by:
-
Tony Battersby authored
If sym_attach() fails to allocate np, the error path will dereference a NULL pointer for printk. Signed-off-by:
-
Tony Battersby authored
This patch fixes two bugs: 1) rmmod sym53c8xx uses shost after freeing it with scsi_put_host(shost). 2) insmod sym53c8xx doesn't call scsi_put_host(shost) if scsi_add_host() fails, causing a memory leak on the error path. Signed-off-by:
-
Wayne Boyer authored
Expose the debug and fastfail parameters to /sys/module/ipr/parameters such that they can be enabled/disabled at run time. Signed-off-by:
Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Alan Stern authored
This patch (as1188) combines the tests for decrementing a drive's reported capacity and expands the comment. It also adds an informational message to the system log, informing the user when the reported value has been changed. Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
FUJITA Tomonori authored
This replaces the own list management for struct sg_fd with the standard list_head structure. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
FUJITA Tomonori authored
This changes sg_build_indirect() to use ALIGN macro instead of calculating by hand. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
Julia Lawall authored
!ep->esb_stat is either 1 or 0, and the rightmost bit of ESB_ST_COMPLETE is always 0, making the result of !ep->esb_stat & ESB_ST_COMPLETE always 0. Thus parentheses around the argument to ! seem needed. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
James Bottomley authored
This allows it to compile and be used on the ps3 platform that wants to use the #define values in scsi.h without actually having CONFIG_SCSI set. Signed-off-by: -
Boaz Harrosh authored
Very old OSC's Target had a BUG in the Get/Set attributes where it was looking in the wrong places for attribute lists length. If used with the open-osd initiator, the initiator would dereference a NULL pointer when retrieving system_information attributes. Checks are added that retrieval of each attribute is successful before accessing its value. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
FUJITA Tomonori authored
This fixes the following oops: http://marc.info/?l=linux-kernel&m=123316111415677&w=2 You can reproduce this bug by interrupting a program before a sg response completes. This leads to the special sg state (the orphan state), then sg calls blk_put_request in interrupt (rq->end_io). The above bug report shows the recursive lock problem because sg calls blk_put_request in interrupt. We could call __blk_put_request here instead however we also need to handle blk_rq_unmap_user here, which can't be called in interrupt too. In the orphan state, we don't need to care about the data transfer (the program revoked the command) so adding 'just free the resource' mode to blk_rq_unmap_user is a possible option. I prefer to avoid complicating the blk mapping API when possible. I change the orphan state to call sg_finish_rem_req via execute_in_process_context. We hold sg_fd->kref so sg_fd doesn't go away until keventd_wq finishes our work. copy_from_user/to_user fails so blk_rq_unmap_user just frees the resource without the data transfer. Signed-off-by:
-
Brian King authored
The ibmvfc driver currently always sets the role of all rports to FC_PORT_ROLE_FCP_TARGET, which is not correct for other initiators. This can cause problems if other initiators are on the fabric when we then try to scan the rport for LUNs. Fix this by looking at the service parameters returned in the PRLI to set the roles appropriately. Also look at the returned service parameters to decide whether or not we were actually able to successfully log into the target. Signed-off-by:
-
Chauhan, Vijay authored
During device discovery read capacity fails with 0x068b02 and sets the device size to 0. As a reason any I/O submitted to this path gets killed at sd_prep_fn with BLKPREP_KILL. This patch is to retry for 0x068b02 Signed-off-by:
Vijay Chauhan <vijay.chauhan@lsi.com> Acked-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
Wayne Boyer authored
Adds a message to the error table for an error that wasn't previously handled. In some cases the I/O Adapter will detect an error condition and mark a block as "logically bad". Signed-off-by:
-
Ilgu Hong authored
When we switch controllers the Intel Multi-Flex reports REPORTED_LUNS_DATA_HAS_CHANGED. This patch just has us retry the command. Signed-off-by:
Ilgu Hong <ilgu.hong@promise.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Ilgu Hong authored
This adds the Intel Multi-Flex device to scsi_dh_alua's scsi_dh_devlist, so the module attaches to these devs. Signed-off-by:
-
Ilgu Hong authored
The buf[i] is a byte but we are only asking 4 bits off the group_id. This patch has us take off a byte. Signed-off-by:
-
FUJITA Tomonori authored
No one uses scsi_execute_async with data transfer now. We can remove scsi_req_map_sg. Only scsi_eh_lock_door uses scsi_execute_async. scsi_eh_lock_door doesn't handle sense and the callback. So we can remove scsi_io_context too. Signed-off-by:
-
FUJITA Tomonori authored
This replaces scsi_execute_async with the block layer API. st does the same thing so it might make sense to have something like libst (there are other things that os and osst can share). Signed-off-by:
-
FUJITA Tomonori authored
This simiplifies the buffer management; all the buffers in osst_buffer become the same size. This is necessary to use the block layer API (sg driver was modified in the same way) since the block layer API takes the same size page frames instead of scatter gatter. Signed-off-by:
-
Boaz Harrosh authored
OSD in kernel source code is assumed to be at: drivers/scsi/osd/ with its own Makefile and Kconfig Add includes to them from drivers/scsi Makefile and Kconfig Add OSD to MAINTAINERS file Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
-
Boaz Harrosh authored
Kconfig file for the drivers/scsi/osd subdirectory. Adds the following config items: config SCSI_OSD_INITIATOR config SCSI_OSD_ULD config SCSI_OSD_DPRINT_SENSE config SCSI_OSD_DEBUG Signed-off-by:
-
Boaz Harrosh authored
Add osd.txt to Documentation/scsi/ Signed-off-by:
-
Boaz Harrosh authored
Implementation of the osd_req_decode_sense() API. Can be called by library users to decode what failed in command executions. Add SCSI_OSD_DPRINT_SENSE Kconfig variable. Possible values are: 0 - Do not print any errors to messages file <KERN_ERR> 1 - (Default) Print only decoded errors that are not recoverable. Recoverable errors are those that the target has complied with the request but with a warning. For example read passed end of object will return zeros after the last valid byte. 2- Print all errors. Signed-off-by: -
Boaz Harrosh authored
Auto detect an OSDv2 or OSDv1 target at run time. Note how none of the OSD API calls change. The tests do not know what device version it is. This test now passes against both the IBM-OSD-SIM OSD1 target as well as OSC's OSD2 target. Signed-off-by:
-
Boaz Harrosh authored
Add support for OSD2 at run time. It is now possible to run with both OSDv1 and OSDv2 targets at the same time. The actual detection should be preformed by the security manager, as the version is encoded in the capability structure. Signed-off-by:
-
Boaz Harrosh authored
Some commands declared in header are not yet implemented. Put them as stubs in .c file, just so they take their place in the file Signed-off-by:
-
Boaz Harrosh authored
Add support for the various List-objects commands. List-partitions-in-device, List-collections-in-partition, List-objects-in-partition, List-objects-in-collection. All these support partial listing and continuation. Add support for the different Flush commands and options. Signed-off-by:
-
Boaz Harrosh authored
Layout the signing of OSD's CDB and all-data security modes. The actual code for signing the data and CDB is missing, but the code flow and the extra buffer segments are all in place. Signed-off-by:
-
Boaz Harrosh authored
Support for both List-Mode and Page-Mode osd attributes. One of these operations may be added to most other operations. Define the OSD standard's attribute pages constants and structures (osd_attributes.h) Signed-off-by:
-
