- 10 Jun, 2013 29 commits
-
-
Andrzej Pietrasiewicz authored
use new interface so old one can be removed. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
Converting eem to the new function interface requires converting the USB eem's function code and its users. This patch converts the f_eem.c to the new function interface. The file is now compiled into a separate usb_f_eem.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
moving to new interface so we can remove the older one. Signed-off-by:
-
Andrzej Pietrasiewicz authored
helper function to copy MAC address to proper place. Signed-off-by:
-
Andrzej Pietrasiewicz authored
f_phonet learns about configfs so we can remove in-kernel gadget drivers. Signed-off-by:
-
Andrzej Pietrasiewicz authored
this will let us deprecate (and remove) the old interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
There are no old function interface users left, so the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
use the new interface which will allow us to deprecate the legacy way of binding functions. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Converting f_phonet to the new function interface requires converting the f_phonet's function code and its users. This patch converts the f_phonet.c to the new function interface. The file is now compiled into a separate usb_f_phonet.ko module. The old function interface is provided by means of preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
cleanup patch only in preparation for configfs. Signed-off-by:
-
Andrzej Pietrasiewicz authored
There are no old function interface users left, so the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
preparation to use configfs-based approach on g_nokia.ko Signed-off-by:
-
Andrzej Pietrasiewicz authored
use the new usb_gstrings_attach interface Signed-off-by:
-
Andrzej Pietrasiewicz authored
f_ecm learns about our new configfs-based binding. Signed-off-by:
-
Andrzej Pietrasiewicz authored
use the new usb_gstrings_attach interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
f_ecm has been converted to new configfs infrastructure, fixing cdc2 gadget driver. [ balbi@ti.com : fixed a bunch of errors when adding ECM function ] Signed-off-by:
-
Andrzej Pietrasiewicz authored
Converting ecm to the new function interface requires converting the USB ecm's function code and its users. This patch converts the f_ecm.c to the new function interface. The file is now compiled into a separate usb_f_ecm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
All USB Ethernet functions will have very similar attributes in configfs. This patch provides helper definitions to ease writing the functions and reduce source code duplication. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add configfs support to the NCM function driver so that we can, eventually, get rid of kernel-based gadget drivers. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Trivial patch making use of the new usb_gstrings_attach interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
There are no old function interface users left, so the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Utilize our new configfs-based interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Converting ncm to the new function interface requires converting the USB ncm's function code and its users. This patch converts the f_ncm.c to the new function interface. The file is now compiled into a separate usb_f_ncm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add an interface to create a struct netdev_dev filled with default values, an interface which makes it an interface to fill the struct with useful values and an interface to read the values set. The patch also adds an interface to register the net device associated with an ethernet-over-usb link. Signed-off-by:
-
Andrzej Pietrasiewicz authored
In order to convert to configfs the usb functions need to be converted to a new interface and compiled as modules. This patch creates an rndis module which will be used by the new functions. After all users of f_rndis are converted to the new interface, this module can be merged with f_rndis module. Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
u_ether.c has been #include'd by all gadgets which implement USB Ethernet functions. In order to add configfs support, the f_ecm.c, f_eem.c, f_ncm.c, f_subset.c, f_rndis.c need to be converted into modules and must not be #include'd. Consequently, the u_ether.c needs to be a module too, in a manner similar to u_serial.c. The resulting module should not take any parameters, so they are pushed to the current users of it, that is ether.c, g_ffs.c, multi.c, ncm.c, nokia.c. Signed-off-by:
-
UCHINO Satoshi authored
Without this memory barrier, the file-storage thread may fail to escape from the following while loop, because it may observe new common->thread_wakeup_needed and old bh->state which are updated by the callback functions. /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { rc = sleep_thread(common); if (rc) return rc; } Cc: stable@vger.kernel.org Signed-off-by:UCHINO Satoshi <satoshi.uchino@toshiba.co.jp> Acked-by:
-
Jassi Brar authored
prm_to_uac2() is broken because it tests against pointer it itself mapped onto, which will never be different. Fix the mapping by adding pointer to parent chip in each rtd param and removing the prm_to_uac2(). Reported-by:
Julien Rouviere <jrouviere@qualistream.com> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Alexey Khoroshilov authored
r8a66597_irq() processes sudmac part (r8a66597_sudmac_irq()) before locking r8a66597->lock. But transfer_complete(), that is called inside (r8a66597_sudmac_irq()->sudmac_finish()->transfer_complete()), expects r8a66597->lock is locked. As a result unheld spinlock can be unlocked. The patch just moves locking before calling r8a66597_sudmac_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
- 04 Jun, 2013 1 commit
-
-
Michael Grzeschik authored
Those optional operations are used to release and reacquire the queue lock when videobuf2 needs to perform operations that sleep for a long time, such as waiting for a buffer to be complete. Implement them to avoid blocking qbuf or streamoff calls when a dqbuf is in progress. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
- 31 May, 2013 2 commits
-
-
Ruchika Kharwar authored
Addition of the M and N recommended values for the USB3 PHY DPLL. Sysclk for DRA7xx is 20MHz. This yields: Clk = 20MHz * M/(N+1) = 20MHz * 1000 /(7+1) = 2.5 Ghz Signed-off-by:
Ruchika Kharwar <ruchika@ti.com> Signed-off-by:
-
Yijing Wang authored
Pci_enable_device() will set device power state to D0, so it's no need to do it again in dwc3_pci_probe(). Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
- 30 May, 2013 1 commit
-
-
Felipe Balbi authored
very minor patch fixing the following build warning on a debug message: drivers/usb/musb/musb_host.c: In function ‘musb_host_rx’: drivers/usb/musb/musb_host.c:1763:4: warning: format ‘%x’ \ expects argument of type ‘unsigned int’, but argument \ 6 has type ‘dma_addr_t’ [-Wformat] Signed-off-by:
-
- 29 May, 2013 6 commits
-
-
Venu Byravarasu authored
Registered Tegra USB PHY as a separate platform driver. To synchronize host controller and PHY initialization, used deferred probe mechanism. As PHY should be initialized before EHCI starts running, deferred probe of Tegra EHCI driver till PHY probe gets completed. Got rid of instance number based handling in host driver. Made use of DT params to get the PHY Pad registers. Signed-off-by:
Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by:
-
Venu Byravarasu authored
Check return values from all GPIO APIs and handle errors accordingly. Remove the call to clk_disable_unprepare(); this function does not prepare or enable the clock, so the error path should not disable or unprepare it. Signed-off-by:
-
Venu Byravarasu authored
As GPIO information is avail through DT, used it to get Tegra ULPI reset GPIO number. Added a new member to tegra_usb_phy structure to store this number. Signed-off-by:
-
Venu Byravarasu authored
Added a new PHY mode to support OTG. Obtained Tegra USB PHY mode using DT property. Signed-off-by:
-
Venu Byravarasu authored
In case if clk_get_sys fails, return correct error value provided by the API. Signed-off-by:
-
Felipe Balbi authored
ARM: tegra: DT-related fixes needed by the USB tree The Tegra USB bindings were in bad shape. The patches in this branch fix the binding definitions, and make all the necessary additions to the DT files. Stale nodes/properties will be removed early in 3.12 once the USB driver has been updated for the new binding. These changes are needed in both the USB tree, to allow the driver to be updated to handle them, and the Tegra tree, so that various tree- wide DT changes (e.g. conversion of IRQ/GPIO/clock constants to defines) can be applied on top of them. * tag 'tegra-for-3.11-deps-for-usb': ARM: tegra: update device trees for USB binding rework ARM: tegra: modify ULPI reset GPIO properties ARM: tegra: finalize USB EHCI and PHY bindings Signed-of-by:
-
- 28 May, 2013 1 commit
-
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by:Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
